Clone Ebs 11.5.8
Hi,
Can I clone Apps 11.5.8 (DB 8.1.7.4) from solaris sparc (5.9) to solaris x86 ? after that upgrade to 11.5.10.2 ?
Tanks.
Saadeddine.
Saadeddine BRAHMIA wrote:
We have installed new hardware "Power Edge M1000e Blade" with "Dell M 600 blade server" and vmware esx.
I want to create a virtual machine on esx with solaris or oracle linux OS and clone ebs, after that upgrade to 11.5.10.2.
Is there any solution ?
Tanks.To migrate from Solaris to Linux, please refer to:
Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]
Debugging Platform Migration Issues in Oracle Applications 11i [ID 567703.1]
To migrate the database tier node, please refer to:
Export/import notes on Applications 11i Database 11g [ID 557738.1]
Transportable Tablespace With 11gR2 And EBS 11i [ID 1325954.1]
To upgrade to 11.5.10.2, please refer to:
Oracle Applications Release 11.5.10.2 Maintenance Pack Installation Instructions [ID 316365.1]
Thanks,
Hussein
Similar Messages
-
Hi:
I am using RMAN to clone EBS R12. After the clone I checked the log file against the /staging/.../PROD (data files) and found last three files are not in the log file that mean they are not copied. We use "SET UNTIL SEQUENCE 80426 THREAD 1". Is that Okay or the clone is failed?
Thank you for your help and regardsThere were no errors in the log file except at the end it says
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/29/2012 14:49:25
RMAN-06136: ORACLE error from auxiliary database: ORA-02236: invalid file name
But I managed to open the database. I did get error like flash area space problem. After increase the db_recovery_file_dest_size, the database and apps are up and running.
How to compare schemas and table records? So normally, all the datafiles should be copied/cloned to the target instnace, right? -
Clone EBS without shutdown EBS
EBS version: 12.1.3the general method to clone EBS system is to shutdown the appTier and dbTier and then copy all the file to target system, and use adcfgclone to config.
I want to know how to clone the EBS system online(without shutdown apps and db).
I suppose I can copy a part of EBS files and use RMAN to recover db ,at last run adcfgclone. Is it OK?
can you share me the method ?Hi;
Please check advanced cloning part from below doc:
Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database [ID 760772.1]
Cloning Oracle Applications Release 12 with Rapid Clone[ID 406982.1]
Regard
Helios -
Rapid clone ebs 12.1.3 with rdbms 11.2.0.3
Hello
I want to clone my oracle ebs environment
source server : karamba
source database : PROD
Target server : djaraff
target database : CLNE
I follow the oracle support document ID 406982.1.
But when i run perl adcfgclone.pl
i have the error
plyDBTier_03181744.log
/ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
ERROR while running Apply...
Mon Mar 18 17:45:28 2013
ERROR: Failed to execute /oraapps/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/clone/bin/adclone.pl
and in the logfile i can see
AutoConfig could not successfully execute the following scripts:
s/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/perl /oraapps/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/clone
ouicli.pl INSTE8_APPLY 255
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
+/oraapps/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/driver/regclone.drv+
+(END)+
Any idea, i tried many times but still got the same error.
Thanksdjoloff wrote:
Hi Hussein,
stiill failed my clone
here are the steps
SOURCE servername karamba SID PROD
1- [oracle@karamba patches_ebs]$ sh /oraapps/app/oracle/PROD/inst/apps/PROD_karamba/admin/scripts/adautocfg.sh
2- [oracle@karamba patches_ebs]$ perl /oraapps/app/oracle/PROD/apps/apps_st/appl/ad/12.0.0/bin/admkappsutil.pl
3- [oracle@karamba patches_ebs]$ cp /oraapps/app/oracle/PROD/inst/apps/PROD_karamba/admin/out/appsutil.zip /oraapps/app/oracle/PROD/db/tech_st/11.2.0/
4- [oracle@karamba 11.2.0]$ unzip -o appsutil.zip
5- [oracle@karamba 11.2.0]$ sh /oraapps/app/oracle/PROD/db/tech_st/11.2.0/appsutil/scripts/PROD_karamba/adautocfg.sh
6- 9. Maintain Snapshot Information with adadmin
7- [oracle@karamba PROD_karamba]$ pwd
/oraapps/app/oracle/PROD/db/tech_st/11.2.0/appsutil/scripts/PROD_karamba
[oracle@karamba PROD_karamba]$ perl adpreclone.pl dbTier
8- [oracle@karamba scripts]$ pwd
/oraapps/app/oracle/PROD/inst/apps/PROD_karamba/admin/scripts
[oracle@karamba scripts]$ perl adpreclone.pl appsTier
9- [oracle@karamba PROD]$ scp -pr db/ apps djaraff:/oraapps/app/oracle/CLNE/
TARGET : servername djaraff new_sid: CLNE
/oraapps/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/clone/bin
[oracle@djaraff bin]$ perl adcfgclone.pl dbTier
Failed
RC-50013: Fatal: Instantiate driver did not complete successfully.
*/oraapps/app/oracle/CLNE/db/tech_st/11.2.0/appsutil/driver/regclone.drv*
*(END*)
Note : I checked the metalink notes you indicated (change the JRE)...
Did I skip a step?
Thanks
Edited by: djoloff on Mar 22, 2013 7:19 AMHi,
Your steps look ok. Which perl version are you using?
Thanks -
Oracle database error after clone EBS 11i.
Hi,
I am getting following error ORA-01578 message when I open forms after the cloning.
APP-FND-01564: Oracle error 1578 in fdmgrated.
But no error in database alert log file.
Clone was done by RMAN.
Oracle 10gR2 on AIX.
EBS 11i.
Thanks.Yes, Autocofig completed without any error message.
But no errors in database alert log file.
Full error message is when I open Forms:
Cause: fdmgranted failed due to ORa-01578: Oracle data block corrupted
(file#440, block#9291)
ORA-01110: data file 440:
ORA_26040: Data block was loaded using the NOLOGGING option. please seee this
ORA-1578 / ORA-26040 Corrupt blocks by NOLOGGING - Error explanation and solution [ID 794505.1]
Handling Oracle Block Corruptions in Oracle7/8/8i/9i/10g/11g [ID 28814.1]
How to identify all the Corrupted Objects in the Database with RMAN [ID 472231.1]
OERR: ORA-1578 "ORACLE data block corrupted (file # %s, block # %s)" Master Note [ID 1578.1]
Master Note for Handling Oracle Database Corruption Issues [ID 1088018.1]
;) AppsMAsti ;)
sharing is Caring -
Rapid Clone EBS 11.5.10
Please, can you tell me if the Clone is certified ? Tier (por Rapid Clone) : Source SO : Solaris Sparc 9 --> Target SO
Solaris x86.
Thanks,Hi,
If EBS is certified with target OS then yes you can do the clone.
anyway the right forum is: General EBS Discussion
Regards,
Taj -
Does anybody has a document to clone EBS version 11.0.3?
Hi techies,
Could you please share a document/process/steps to clone an 11.0.3(no autoconfig, no rapid clone) environment(db and apps). I'm unable to find a helpful document in Metalink.
Thanks in Advance.
RaviHi Bob,
I do not have any docs for cloning 11.0.3 on Windows, but I have the document for cloning (release 11.5.1 to 11.5.5 non-AutoConfig enabled Oracle Applications systems) which I think is no longer available on Metalink (and of course not supported anymore). If you want to have a copy of this document, please let me know. -
EBS 11i java error during clone.
Hi,
I am getting following error during the clone EBS 11i on IBM AIX 6.1.
applmgr@PROD11]/u01/oracle/prod11comn/clone/bin> perl adcfgclone.pl appsTier
ERROR: cannot find jre or java under /u01/oracle/prod11comn/clone/bin/../jre/bin
Please verify that you ran adpreclone.pl successfully
Any help would be appreciated.
Thanks.Hi,
check if any softlinks pointing to the source path under $COMMON_TOP/clone/jre/bin.
if not delete clone directory under $COMMON_TOP/ on target node
rerun adpreclone.pl on source node,
copy the $COMMON_TOP/clone fro source to target and retest the issue.
Thanks
RK -
Cloning EBS 11.5.8 Instance
Hello All,
I want to clone an EBS11.5.8 Instance.
I am not sure how to work on this, as I don't see appsutil dirctory in the ORACLE HOME on the DB tier.
Can someone please help me on how to clone this without using "Rapid Clone".
Thanks,
MooreMoore,
You should use Rapid Clone as it's the only supported way to clone EBS instances.
Cloning Oracle Applications Release 11i with Rapid Clone (Doc ID 230672.1)
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
For the missing appsutil directory, please see:
How To Recreate the <RDBMS ORACLE_HOME>/appsutil/scripts/<CONTEXT_NAME> directory (Doc ID 377495.1)
How to run AutoConfig On Database Tier after unzipping appsutil.zip ? (Doc ID 462232.1)
Thanks,
Hussein -
Clone and consoliate all application servers to one??
we are doing clone EBS system testing. our EBS system is following:
1. database server
2. primary application server -- all modules except batch process
3. secondly application server -- all modules except batch process
4. addition application server -- batch process only
after clone we plan have following structure:
1. database server
2. application server -- all modules
Is it possible?
How to do it?
Thanks.Yes, it is possible. Refer the following note (Reducing the number of nodes of a multi-node system (merge APPL_TOP)).
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1 -
How to clone OAS 10g having SSO+OID??
Hi,
We are runnig OAS 10g having SSO+OID, which is integrated with EBS 12.0.6 with datebase 10.2.0.3.
Please provide me the steps and metalink doc for cloning the OAS 10g having SSO+OID, and also clone EBS 12.0.6 env???
Please provide the tecnical steps if anyone have?
Envoirnment: Linux x86 (Redhat AS4), and multi node envoirnment.
Thanks
Edited by: 723962 on Jan 24, 2011 2:46 AMIs there any update plz?
-
Database-Table parent-child design
Hi all,
Which (forum) does this master-detail table design question belongs to or appropriate to post to?
I have 3 basic entities> servers, databases, and apps
example:
servers=server1,server2,server3,etc
database=PROD1,DEV1,TEST1,etc
apps=GL,FA,AP,AR,INV,HR,etc
In every server there are many database type (dev,prod,test,prod1, prod2,etc)
In every apps there are many database type too (dev,prod,test,prod1, prod2,etc)
So databases are children of both servers and apps?
To which parents does this "children" database legally belong?
ThanksHi;
Which (forum) does this master-detail table design question belongs to or appropriate to post to?
I have 3 basic entities> servers, databases, and apps
example:
servers=server1,server2,server3,etc
database=PROD1,DEV1,TEST1,etc
apps=GL,FA,AP,AR,INV,HR,etcFrom your post i got you have EBS. What is your EBS version? By the way its more effecient to close your thread here as answered and move your issue to Forum Home » E-Business Suite » EBS General Discussion
In every server there are many database type (dev,prod,test,prod1, prod2,etc)It possible, i mean on same server you could have EBS's database like dev,prod and also can have oracle database which is not belong any EBS system like sid ORCL
In every apps there are many database type too (dev,prod,test,prod1, prod2,etc)I belive this is wrong, One EBS has one Database but it doesnt mean that database need extra data from other source which is using ETL etc. So your EBS db always parent and get data from child, and also that main db can update information which is exist on child
You could have one PROD and can clone it as CLON so those 2 instance have actualy same data and same proporties, we cant say those dbs has parent-child relation. But we can say CLON ebs produced by PROD instance
Regard
Helios -
Perl adcfgclone.pl dbTier fails on control file creation
Hi Guys,
Platform is : Linux 5
DB: 11.1.0.7
R12.1.1
I have a temp file that had been removed at the OS level.. on the source And I want to updated the control file regarding this so that it does not record this file any more.
I am using rapid clone (EBS) to cone this source database unto the target but is failing on the target control file creation as it's trying to find the temp file that had been removed at the source. OS level.
So I will like to update the control file on the source so that it does not reflect this dropped temp file any longer and then do the clone again.
So What's the best way to achieve this or please point me to a metalink note:
Also below are the rrors from the rapid clone
/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u04/oracle/ASCPT/db/tech_st/11.1.0/oui -classpath /u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/xmlparserv2.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/ojdbc6.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/java:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/oui/ewt3.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/oui/share.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/oui/srvm.jar:/u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/DEV2_irvstjunx084.xml -stage /u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/clone -showProgress
APPS Password : Log file located at /u04/oracle/ASCPT/db/tech_st/11.1.0/appsutil/log/DEV2_irvstjunx084/ApplyDBTier_05140928.log
/ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
I had tried modifying the the file adcrdbclone.sql in which is caled by <RDBMS $ORACLE_HOME>/appsutil/template/addbtmpl.drv by removing the temp file that does not exist .
and then ran perl adcfgclone.pl dbTier again but still failed on the control file creation.
Please advise
Thanks in advanceHi Helios ,
Thanks for getting back to me.
I found that the issed was that there is a datafile that was dropped at the source at the OS level ... ( A mistake by one of support staff).
So How can I modify the control file creation at the target not to reference the data file that does not exist. I have tried removing it as stated in my previore post but it stall fails at the control file creation
Please adivise -
hi hussein,
I am confused about cloning with the same OS but different versions.
for example:
Can I clone EBS R12 on RHEL4.5 to RHEL.4.6? and similarly can I clone EBS 11i on AIX 5.2 to AIX 5.3?
thanks a lotHussein,
I am cloing 11i AIX 5.2 to new server AIX 5.3
I was able to succesfully clone the DB Tier. But I got error on the appstier :(
Running Rapid Clone with command:
perl /u02/applprod/prodcomn/clone/bin/adclone.pl java=/u02/applprod/prodcomn/clone/bin/../jre/jre mode=apply stage=/u02/applprod/prodcomn/clone/ bin/.. component=appsTier method=CUSTOM appctxtg=/u02/applprod/prodappl/admin/PROD_ams2.xml showProgress contextValidated=true
Beginning application tier Apply - Tue Nov 24 15:18:07 2009
Log file located at /u02/applprod/prodappl/admin/PROD_ams2/log/ApplyAppsTier_11240318.log
RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver /u02/applprod/prodora/iAS/appsutil/driver/instconf.drv
ERROR while running Apply...
ERROR: Failed to execute /u02/applprod/prodcomn/clone/bin/adclone.plApplyAppsTier_11240318.log
setting ownership: applprod:oinstall
AC-00423: Template file: /u02/applprod/prodora/iAS/appsutil/template/Apache/jdk/.private142/.private142/.private142/.private142/.private142/.private142/.priv
ate142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/COPYRIGHT missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /u02/applprod/prodora/iAS/appsutil/template/Apache/jdk/.private142/.private142/.private142/.private142/.private142/.private142/.priv
ate142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/.private142/jre/bin/webstart_update_sdk.sh missing fro
m file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:Please help....thanks -
Hi friendz,
I am at edelivery.oracle.com now to download OEL4.8
But I found 2 choices:
Oracle Linux Release 4 Update 8 for x86 (32 Bit) - DVD V16749-01 2.2G
Oracle Linux Release 4 Update 8 for x86 source (32 Bit) - DVD V16757-01 2.4GWhich one should I choose?
Thanks a lotHi;
1. Install OEL4.8 in a new server.Okey
2. Clone EBS 11i from RHEL4.6 to the new server(OEL4.8).Okey
3. Upgrade database from 9.2.0.8 to 11gR2Good
4. Upgrade OEL4.8 to OEL5.6I have doubt here, why you dont install directly OEL5.6 and follow 1,2,3 steps on this version?
Please check:
RHEL3 to RHEL5
How to migrate from RHEL3 to RHEL5 (11i on 10.2.0,4)
RHEL4 to RHEL5 upgrade
Re: Upgraded OS ans what are all steps to change in instance
Regard
Helios
Maybe you are looking for
-
HP Photosmart Premium C309g-m slow previews
Hello, Yesterday I bought HP Photosmart Premium C309g-m printer and I really wonder on few things with it's speed. Whenever I try to use some advanced features when printing photos like: adding frames, cropping, rotate etc it is incredible slow! I fi
-
Error message. Please help Eagle project lost.
Please wait... If this message is not eventually replaced by the proper contents of the document your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Mac by visiting http://www.ad
-
Get Active directory users in C# error
Hello, I am tring to get all folders and users name from AD in C#, but got error. this is my code: DirectoryEntry de = new DirectoryEntry(domainName, ConfigurationManager.AppSettings[AdminUserName], ConfigurationManager.AppSettings[AdminUserPwd
-
Album tracks from 1 album are split up in the Library list
When I download a CD of a Musical, the album will be displayed in 5 or 6 spots in the Library with only a few of the tracks in each. How do I get all of the tracks (in the correct order) listed under just one album? Thanx, chicajill
-
Can a jpeg file be opened in raw format in photoshop elements 11?
Can a jpeg file be opened in raw format in photshop elements 11?