Clone error in r12
Dear all,
I have installed r12.0.4 in linux, installation is fine, when I try to clone this instance to one more server, am getting the error
OS utlities not in path.
I have ar,cc,ld,make all in location. perl.. I checked with the source instance,when I try to invoke adcfgclone.pl on the source
instance , am getting the same error in the source instance. i didnt apply any patch after installation, it is a fresh installation..
any idea ?
Kai
Hussain,
Unfortunately am not with the system now.. but I faced the error saying that OS Utlities in path. I checked with the source database, but am facing the same error in the source also ?
any idea ?
kai
Similar Messages
-
Post Clone failing on R12.1.3 on AIX5.3
QL*Plus: Release 11.2.0.3.0 Production on Tue Dec 10 10:34:18 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter user-name: / as sysdba
exec(): 0509-036 Cannot load program oracle because of the following errors:
rtld: 0712-001 Symbol __pthread was referenced
from module oracle(), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting.
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:Hi Helois,
I appreciate your effort to clear my confusion on this.
The section from R12 cloning note ["Note: If you are cloning between different versions of the Operating System (e.g. Linux 5 to Linux 4)......."] lead me to this confusion.
Here is another not which deals with higher version to lower version clone : lsnrctl failed to start after cloning from OEL 5.6 To OEL 4.6 (Doc ID 1589975.1)
As it was not very clear, i thought of getting advice from oracle support community. The Support Engineer has confirmed it being supported
Here is the post
So it seems to me that op can continue with his cloning
Regards
Yoonas -
Expense Report Expense Program errors in R12.1.2
Hi gurus,
I am trying to run the Expesne Report Export Program and it is erroring out the Reject code is (INCONSISTENT SUPPL SITE).Here we have to Sources
1:XpenseXpress
2: EXTAMEX
and when i run the export program for source 2 the invoices are getting created and when i run the export program for the source 1 the records are getting rejected with the error (INCONSISTENT SUPPL SITE).
The interesting thing is the vendor_id(12759) and vendor_site_id(462101) for both the sources is Same.The data for which I am running is the data from the 11i Production Instace for the previous day.The error I am getting is in R12.1.2 Instance.
I searched the tables ap_suppliers,ap_supplier_sites_all,hz_parties and hz_party_sites_all the supplier is active it has site's defined every where only thing i Observed is for the same vendor we have Vendor_site_codes as [M5H 1T1(site_id :424663,M5H1T1:462101).This is what i could research and found out.I am struck Here
Help would be highly appreciated.
Thanks & Regards
KrishnaHi Krishna,
please check the vendor type should be "Employee".
Try to create a expense report for the same vendor site manually you will get the exact issue.
If still getting issue please send the exact error code/desc and vendor site screen shot.
Regards,
Ajit
[email protected] -
500 internal server error in R12
while connecting R12 through front end, i am getting below error
500 Internal Server Error
java.lang.NoClassDefFoundError at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126) at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
could you help me to resolve this issue.Hi Venkat;
It was working before?If yes what have you been changed?(patch etc.) Did you run autuconfig and retest issue?What is your OS?Do you have any error in alert.log?
Please check below:
500 Internal Server Error [ID 761869.1]
"500 Internal Server Error - java.lang.NoClassDefFoundError: oracle.apps.fnd.profiles.Profiles" on 10G [ID 567554.1]
Also check:
Starting up AS10g services in an EBusiness Suite Release 12 environment [ID 743518.1]
Hope it helps
Regard
Helios -
Listener starting error in R12
hi,
when im trying to start the r12 instance listener im getting the following error,,,,
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
Linux Error: 98: Address already in use
im using 10 database for this and im using linux redhat version 4.0....
i think, have to change the address for the port...
how to do that... pls explain anyone ...
thanks,
vasanthhi,
As the upper file that u gave is same as of me....
if i stop the SID im getting the following error.....
[ora10g@ebs ~]$ lsnrctl stop Y12I
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 03-JUN-2010 06:11:19
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCY12I))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=ebs.yantro.com)(Port=1542))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Here comes below my listener.ora file,
Y12I =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY= EXTPROCY12I))
(ADDRESS= (PROTOCOL= TCP)(Host= ebs.yantro.com )(Port= 1542))
SID_LIST_Y12I =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= /10g/d02/oracle/Y12I/db/tech_st/10.2.0)
(SID_NAME = Y12I)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /10g/d02/oracle/Y12I/db/tech_st/10.2.0)
(PROGRAM = extproc)
STARTUP_WAIT_TIME_Y12I = 0
CONNECT_TIMEOUT_Y12I = 10
TRACE_LEVEL_Y12I = OFF
LOG_DIRECTORY_Y12I = /10g/d02/oracle/Y12I/db/tech_st/10.2.0/network/admin
LOG_FILE_Y12I = Y12I
TRACE_DIRECTORY_Y12I = /10g/d02/oracle/Y12I/db/tech_st/10.2.0/network/admin
TRACE_FILE_Y12I = Y12I
ADMIN_RESTRICTIONS_Y12I = OFF
SUBSCRIBE_FOR_NODE_DOWN_EVENT_Y12I = OFF
IFILE=/10g/d02/oracle/Y12I/db/tech_st/10.2.0/network/admin/Y12I_ebs/listener_ifile.ora
thanks,
vasanth
Edited by: user12864080 on Jun 3, 2010 5:49 AM -
Relink Error oracle r12 on windows
error while relink oracle r12 on windows
with the following error
An error occurred while relinking application programs.
Creating import libraries for FND
Creating import library APPR60UE.lib on Sun Mar 18 02:03:43 EST 2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:2877: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:729: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:2924: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:1310: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
gnumake: `E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/APPR60UE.lib' is up
to date.
Done with creating import library APPR60UE.lib on Sun Mar 18 02:03:43 EST 2012
Creating import library CMDCART.lib on Sun Mar 18 02:03:43 EST 2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:2877: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:729: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:2924: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/imp_fnd_3760.mk:1310: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
gnumake: `E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/CMDCART.lib' is up
to date.
Starting link of fnd executable 'APPR60UE.dll' on Sun Mar 18 02:03:46 EST
2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/APPR60UE.map
-NODEFAULTLIB -MACHINE:IX86 -NOLOGO -SUBSYSTEM:CONSOLE -DLL
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/APPR60UE.dll
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/APPR60UE.exp afsfld.obj
fdxext.obj fdxidk.obj fdxidr.obj fdxsqk.obj fdxsqr.obj xitdas.obj fduxit.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/xitsrw.obj
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/xirfnd.obj
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fdxsrw.obj
E:/oracle/VIS/apps/apps_st/appl/po/12.0.0/lib/xirpo.obj
E:/oracle/VIS/apps/apps_st/appl/fa/12.0.0/lib/xirfa.obj \
E:/oracle/VIS/apps/apps_st/appl/ar/12.0.0/lib/xirar.obj
E:/oracle/VIS/apps/tech_st/10.1.2/reports/userexit/uez.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDXIT.lib
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FND115W.lib \
E:/oracle/VIS/apps/apps_st/appl/pay/12.0.0/lib/payst.lib
E:/oracle/VIS/apps/apps_st/appl/fa/12.0.0/lib/fast.lib
E:/oracle/VIS/apps/apps_st/appl/ff/12.0.0/lib/FF.lib
E:/oracle/VIS/apps/apps_st/appl/po/12.0.0/lib/PO.lib
E:/oracle/VIS/apps/apps_st/appl/inv/12.0.0/lib/INV.lib \
E:/oracle/VIS/apps/apps_st/appl/gl/12.0.0/lib/GL.lib
E:/oracle/VIS/apps/apps_st/appl/wip/12.0.0/lib/WIP.lib
E:/oracle/VIS/apps/apps_st/appl/alr/12.0.0/lib/alrst.lib
E:/oracle/VIS/apps/apps_st/appl/alr/12.0.0/lib/alstub.obj \
E:/oracle/VIS/apps/apps_st/appl/eng/12.0.0/lib/ENG.lib
E:/oracle/VIS/apps/apps_st/appl/dt/12.0.0/lib/dtst.lib
E:/oracle/VIS/apps/apps_st/appl/mrp/12.0.0/lib/MRP.lib
E:/oracle/VIS/apps/apps_st/appl/bom/12.0.0/lib/BOM.lib
E:/oracle/VIS/apps/apps_st/appl/ar/12.0.0/lib/AR.lib \
E:/oracle/VIS/apps/apps_st/appl/eng/12.0.0/lib/ENG115W.lib
E:/oracle/VIS/apps/apps_st/appl/gl/12.0.0/lib/GL115W.lib
E:/oracle/VIS/apps/apps_st/appl/inv/12.0.0/lib/INV115W.lib \
E:/oracle/VIS/apps/apps_st/appl/wip/12.0.0/lib/WIP115W.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/APPR60UE.dll]
Error 128
Done with link of fnd executable 'APPR60UE.dll' on Sun Mar 18 02:03:46 EST
2012
Relink of module "APPR60UE.dll" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CMDCART.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this CMDCART.dll
gnumake -f E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk
cmdcart.LIST
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
Extracting objects from the library
ar -xv -F coff E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fndst.lib
afplog.obj
x - afplog.obj
Creating temporary function list, if required.
echo
gnumake -f E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll
Starting link of fnd executable 'CMDCART.dll' on Sun Mar 18 02:03:46 EST 2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.map
-NODEFAULTLIB -MACHINE:IX86 -NOLOGO -SUBSYSTEM:CONSOLE -DLL
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/afpsmcrt.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/CMDCART.exp
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll]
Error 128
Done with link of fnd executable 'CMDCART.dll' on Sun Mar 18 02:03:46 EST 2012
Relink of module "CMDCART.dll" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CONCSUB.exe' in product fnd ...
gnumake -f E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe
Starting link of fnd executable 'CONCSUB.exe' on Sun Mar 18 02:03:46 EST 2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fdpocr.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe]
Error 128
Done with link of fnd executable 'CONCSUB.exe' on Sun Mar 18 02:03:46 EST 2012
Relink of module "CONCSUB.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'FDULONG.exe' in product fnd ...
gnumake -f E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FDULONG.exe
Starting link of fnd executable 'FDULONG.exe' on Sun Mar 18 02:03:46 EST 2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FDULONG.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FDULONG.exe
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fdulong.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FDULONG.exe]
Error 128
Done with link of fnd executable 'FDULONG.exe' on Sun Mar 18 02:03:46 EST 2012
warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fdfcmp.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fdfcmp.exe
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fdfcmp.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fdfcmp.exe]
Error 128
Done with link of fnd executable 'fdfcmp.exe' on Sun Mar 18 02:03:54 EST 2012
Relink of module "fdfcmp.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Sun Mar 18 02:03:54 EST
2012
process_begin: CreateProcess((null), lib.exe -NOLOGO -LIST
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDST.lib, ...) failed.
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2901: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:752: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:2948: warning:
overriding commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
E:/oracle/VIS/apps/apps_st/appl/admin/VIS/out/link_fnd_3760.mk:1333: warning:
ignoring old commands for target
`E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe -MAP:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oranls10.lib
E:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
gnumake: *** [E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe]
Error 128
Done with link of fnd executable 'fndcpesr.exe' on Sun Mar 18 02:03:54 EST
2012
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'fnd' on Sun Mar 18 02:03:54 EST 2012
adrelink is exiting with status 1
End of adrelink session
Date/time is Sun Mar 18 02:03:54 EST 2012
Rebase DLLs in AU_TOP/bin and copy DLLs back to PROD_TOP/bin
Copy DLLs of ALR to E:/oracle/VIS/apps/apps_st/appl/alr/12.0.0/bin
Copy DLLs of AP to E:/oracle/VIS/apps/apps_st/appl/ap/12.0.0/bin
Copy DLLs of AR to E:/oracle/VIS/apps/apps_st/appl/ar/12.0.0/bin
Copy DLLs of BOM to E:/oracle/VIS/apps/apps_st/appl/bom/12.0.0/bin
Copy DLLs of CRP to E:/oracle/VIS/apps/apps_st/appl/crp/12.0.0/bin
Copy DLLs of DT to E:/oracle/VIS/apps/apps_st/appl/dt/12.0.0/bin
Copy DLLs of ENG to E:/oracle/VIS/apps/apps_st/appl/eng/12.0.0/bin
Copy DLLs of FA to E:/oracle/VIS/apps/apps_st/appl/fa/12.0.0/bin
Copy DLLs of FF to E:/oracle/VIS/apps/apps_st/appl/ff/12.0.0/bin
Copy DLLs of FND to E:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin
Copy DLLs of GL to E:/oracle/VIS/apps/apps_st/appl/gl/12.0.0/bin
Copy DLLs of INV to E:/oracle/VIS/apps/apps_st/appl/inv/12.0.0/bin
Copy DLLs of MRP to E:/oracle/VIS/apps/apps_st/appl/mrp/12.0.0/bin
Copy DLLs of GMA to E:/oracle/VIS/apps/apps_st/appl/gma/12.0.0/bin
Copy DLLs of PAY to E:/oracle/VIS/apps/apps_st/appl/pay/12.0.0/bin
Copy DLLs of PO to E:/oracle/VIS/apps/apps_st/appl/po/12.0.0/bin
Copy DLLs of WIP to E:/oracle/VIS/apps/apps_st/appl/wip/12.0.0/binDo you have any suggestion about that error
i want to start the application as soon as possibleWhat version of gnumake/make you are using? Make sure you use the one mentioned in (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]), under "GNU Make (Shareware)" section.
Thanks,
Hussein -
Hello,
We use Commvault for our backup software. I can successfully clone one application's PROD instance on server1 to TEST on server2.
However, for another application, attempting the same process of cloning the app's PROD instance on server1 to TEST on server2, I'm getting RMAN errors.
The prod database is ISLP and test database is ISLT. I've set the parameters:
o alter system set db_file_name_convert = '/u02/oradata/ISLP', '/u02/oradata/ISLT'
o alter system set log_file_name_convert= '/u01/oradata/ISLP', '/data/oracle/ISLT'
Again the destination is on a second server.
The error message I receive is:
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/09/2013 12:48:55
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary file name /u02/oradata/ISLP/redo_ISLP_2b.log conflicts with a file used by the target database
RMAN-05001: auxiliary file name /u02/oradata/ISLP/redo_ISLP_1b.log conflicts with a file used by the target database
RMAN>
Recovery Manager complete.
I don't understand why RMAN keeps trying to create new redo log files in a directory that is not specified by the log_file_name_convert parameter. I also don't understand why this exact same process works for cloning one applications database but not this application. I would appreciate any help. Thank you. Here is the RMAN script being executed by Commvault.
Rman Script:
[run {
set newname for datafile '/u02/oradata/ISLP/infosilem_ISLP_01.dbf' to '/u02/oradata/ISLT/infosilem_ISLP_01.dbf';
set newname for datafile '/u02/oradata/ISLP/sysaux_ISLP_01.dbf' to '/u02/oradata/ISLT/sysaux_ISLP_01.dbf';
set newname for datafile '/u02/oradata/ISLP/system_ISLP_01.dbf' to '/u02/oradata/ISLT/system_ISLP_01.dbf';
set newname for datafile '/u02/oradata/ISLP/tools_ISLP_01.dbf' to '/u02/oradata/ISLT/tools_ISLP_01.dbf';
set newname for datafile '/u02/oradata/ISLP/undo_ISLP_01.dbf' to '/u02/oradata/ISLT/undo_ISLP_01.dbf';
set newname for datafile '/u02/oradata/ISLP/users_ISLP_01.dbf' to '/u02/oradata/ISLT/users_ISLP_01.dbf';
allocate auxiliary channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/opt/galaxy/Base64/libobk.so,BLKSIZE=262144,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine= RESTORE -jm 142 -a 2:0 -cl 137 -ins 150 -at 22 -j 700481 -jt 700481:3:1 -bal 0 -rcp 0 -ms 1 -p 2 -cn s-dbint -vm Instance001)"
TRACE 0;
set until time = "TO_DATE('05/08/2013 09:00:00','MM/DD/YYYY HH24:MI:SS')" ;
duplicate target database to 'ISLT'
exit;
]You haven't defined a log_file_name_convert for /u02/oradata/ISLP/
Possibly, the database has multiplexed redo log files, one member each in /u01/oradata/ISLP and one member each in /u02/oradata/ISLP.
Hemant K Chitale -
Hi,
We have done an upgrade of our instance from 11.5.10 to 11.5.10.2 and database version from 9.2.0.5 to 11gR2.
The server is in multinode windows 2003 servers.
Now I am preparing a clone instance for the same and getting the following error while running the adcfgclone.pl on dbTier.
Backing up E:\imtest\imtestdb\11.2.0\appsutil\IMTEST_dvlp003.xml to E:\imtest\im
testdb\11.2.0\appsutil\IMTEST_dvlp003.xml4.bak
Creating the new Database Context file from :
E:\imtest\imtestdb\11.2.0\appsutil\template\adxdbctx.tmp
The new database context file has been created :
E:\imtest\imtestdb\11.2.0\appsutil\IMTEST_dvlp003.xml
Log file located at C:\DOCUME~1\ORACLE~1.DVL\LOCALS~1\Temp\CloneContext_08220512
*45.log*
Incorrect JAVA path:
No java executable at E:\imtest\imtestdb\11.2.0\jdk/bin/java.exe or E:\imtest\im
testdb\11.2.0\jdk/bin/jre.exe
Running Rapid Clone with command:
perl adclone.pl java=..\jre\jre mode=apply stage=E:\imtest\imtestdb\11.2
*.0\appsutil\clone\bin\.. component=dbTier method=CUSTOM dbctxtg=E:\imtest\imtest*
db\11.2.0\appsutil\IMTEST_dvlp003.xml showProgress contextValidated=true
Beginning database tier Apply - Mon Aug 22 17:13:42 2011
-e
E:\imtest\imtestdb\11.2.0\appsutil\IMTEST_dvlp003.xml
-stage
E:\imtest\imtestdb\11.2.0\appsutil\clone\bin\..
-pwd
apps
-showProgress
Log file located at E:\imtest\imtestdb\11.2.0\appsutil\log\IMTEST_dvlp003\ApplyD
BTier_08221713.log
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
And below is the error in the log file:
*[AutoConfig Error Report]*
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
*<filename> <phase> <return code where appropriate>*
*[INSTANTIATE PHASE]*
AutoConfig could not successfully instantiate the following files:
Directory: E:\imtest\imtestdb\11.2.0\appsutil\install\IMTEST_dvlp003
adcrdb.cmd INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
StackTrace:
java.lang.Exception: RC-50014: Fatal: Execution of AutoConfig was failed
* at oracle.apps.ad.clone.ApplyDBTechStack.checkAutoConfigErr(ApplyDBTechStack.java:804)*
* at oracle.apps.ad.clone.ApplyDBTechStack.runAutoConfig(ApplyDBTechStack.java:731)*
* at oracle.apps.ad.clone.ApplyDBTechStack.<init>(ApplyDBTechStack.java:431)*
* at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:156)*
* at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)*
* at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)*
* at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)*
* at java.lang.reflect.Constructor.newInstance(Constructor.java:501)*
* at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)*
* at java.lang.Thread.run(Thread.java:595)*
Can anyone help me out with the clone issue.
Regards,
Mahesh
Edited by: mahesh on Aug 22, 2011 7:01 AMadcrdb.cmd INSTE8 Search the log file for this script, you should find more details about the error around the file name.
Also, please check the database log file as this script is used to create the database.
Thanks,
Hussein -
Abldxml giving error after R12 upgrade
Hi,
As a part of R12 upgrade, I'm running adbldxml.pls and it's giving following error.
$ perl adbldxml.pl
Starting context file generation for db tier..
JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
Restart adbldxml.pl with value for jtop as an necessary argument$JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
Restart adbldxml.pl with value for jtop as an necessary argumentPass JRE_TOP as a parameter when you run "perl adbldxml.pl" command.
Thanks,
Hussein -
Custom VO for OTL Custom Timecard Error in R12
Hello All,
I am very new to OA Framework and JDev so first let me write down the steps I did before I got the error on one of the LOVs on timecard page.
1. Created a database view called HXC_CUSTOM_VIEW with only 2 columns
2. Created VO via Jdev in read only mode. Hardcorded the values in CustomLOVVO.xml as,
RowClass="oracle.apps.fnd.framework.server.OAViewRowImpl"
ComponentClass="oracle.apps.hxc.selfservice.timecard.server.CustomLOVVO"
Generated the JAVA as CustomLOVVOImpl. Compiled the project and got .class file.
3. Transfered .xml and .class files onto the server under $JAVA_TOP/hxc/selfservice/timecard/server. CHMOD to 777 for both files.
4. As I am on R12, logged onto application and clicked on responsibility "AK HTML FORMS". Created Attributes and Region and added Region Items.
Covered important details while creating Region such as,
"oracle.apps.hxc.selfservice.timecard.server.TimecardAM"
"oracle.apps.hxc.selfservice.configui.webui.LovCO"
5. Added 2 items under the Region.
6. Modified the timecard .LDT file and add the code to include LOV.
7. Bounced apache and logged into OTL Self-service. Clicked on create timecard, entered value for all fields and when on click on the LOV icon for this item I get the below error,
=======================================================
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 3 with java object of type java.lang.String due to java.sql.SQLException.
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2844)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1834)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:532)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:420)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:335)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.sql.SQLException: Invalid column index
=======================================================
Need help and pointers to troubleshoot this proble. I have hit the wall and not getting any solution.
Thanks an advance.Editing Oracle seeded files is not recommended as they are not upgrade/ patch safe. Read OTL impl white paper for your custom LOV requirements, They have explained well.
--Mukul -
Template form is giving error in R12
Hi All,
We are trying to run the template form from apps R12.But it is giving error as 'frm-40735: On error trigger raised unhandled exception ORA-06508'.we tried out by compiling all .pll and all invalid objects in database .All .pll is compiled by using ADADMIN.only template.fmb is not working even APPSSAND.fmb is also working fine.We are in critical possition pls any body knows please help us.
Regards,
Venkateshwari.JHi Srini,
I tried the below but It didnt work:
/slot/ems6596/appmgr/inst/apps/r1212112_rws60007rems/admin/scripts
-bash-3.00$ adstpall.sh apps/apps
You are running adstpall.sh version 120.10.12010000.4
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
Any help into this. -
Hi:
I got error at end when doing a RMAN clone on linux, RMAN 11.1.0.7. 89163 is the next to last highest sequence
number in the backup log file. So in the clone script I put 89165.
ORA-19870: error while restoring backup piece
ORA-19504: failed to create file
ORA-17502: ksfdcre:4 Failed to create file
ORA-15173: entry 'archive' does not exist in directory '/'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/19/2012 17:36:15
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archived log found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 89163 and starting SCN of 11158664662 found to restore
What is the problem here?
Can I bring up the database up?
Thank you for your help.Then you may get an error as below
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 89165you can try to open the database with resetlogs as you would not be having the archive sequence 89165
Also, 1 suggestion. Since you are on 11g, why not use the feature "active database" ?
rman target sys/pwd@target catalog xxxx auxiliary wwww
RMAN>duplicate target database to 'CLONEDB' from active database;This does not require you to take the backup first and then start the cloning activity -
BNE_UIX_PHYSICAL_DIRECTORY is not configured error in R12
Hi All,
We are on 12.0.4 instance, i have attached responsibility "Desktop Integrator" to user and if i click on "Create Document" It is throughing an error "BNE_UIX_PHYSICAL_DIRECTORY is not configured". I have checked some document 430991.1 in metalink, all are refered to Profile option "BNE_UIX_PHYSICAL_DIRECTORY" and remove any value present in the profile option. I did the same and bounced the Apache. ev en though we are getting the same error. Please guide me.
Many Thanks in advance..To folow the note [ID 549758.1], i pur the profile option in the site or in the Responsability?Site level -- Make sure you bounce Apache then.
Please also check your other thread -- Re: Oracle Web ADI with R12 Error :BNE_UIX_PHYSICAL_DIRECTORY is not configured
Thanks,
Hussein -
PO_DOCUMENT_FUNDS_PVT.do_unreserve API Error in R12
Hi All,
I am trying to use the PO_DOCUMENT_FUNDS_PVT.do_unreserve API to unreserve the existing 'Blanket Purchase agreement' in R12 and it error
out and doesn't go through. The same API call works fine for 'Standard PO' without any issue. This same API call is used in our current Release 11i
and it works fine, does anyone have any idea how to make this work in R12 for existing 'Blanket Purchase Agreement'? Any help is greatly appreciated.
Thanks,
SSHi Hussien,
Sorry for the delayed response, I was on vacation. Thanks for the links that you have provided. when I try to call the API it just returns with 'FATAL'
error and when I check in the table 'po_online_report_text' based on online_report_id value returned by API call, it shows the following text
Text_Line from above table when Unreserve failed on 04/29/2013
GL BC Packets are empty. Event 38090918 is not processed.
The subledger journal entry does not balance in the entered currency. Please verify the entered amounts on the journal entry lines.
GL BC Packets are empty. Event 38090918 is not processed.
The subledger journal entry does not balance in the entered currency. Please verify the entered amounts on the journal entry lines.
I don't see any event in XLA_AE_HEADERS table or GL_BC_PACKETS table with the event_id 38090918 as given in the error text. Any help would
be greatly appreciated. Is there any other API that we can use to do 'Reserve'/'Unreserve' from back-end in R12 Encumbrance Accounting environment?
Thanks,
SS -
Java.io.IOException: Broken pipe error in R12 oacore log
All,
Very frequently my R12 login page is going to blank screen at the same time oacore application log has below,
20:02:27.606 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:71)
at java.nio.channels.Channels.access$000(Channels.java:58)
at java.nio.channels.Channels$1.write(Channels.java:145)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
Application - 12.1.3
DB - 11.2.0.3
OS - AIX 6.1
Has anyone faced this before ? Any note-id/suggestions pls ?Hi;
Very frequently my R12 login page is going to blank screen at the same time oacore application log has below,
20:02:27.606 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)Please review:
How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1]
Regard
Helios
Maybe you are looking for
-
In smart form, can i create more than one main window,
In smart form, can i create more than one main window, if no, then why?
-
Hi experts, 1. I have created a distribution rule and assigned 3 profit centers. 2. I have created AP (service document) using this distribution rule. 3. In profit Center report, I can see that the amount on my AP was properly distributed on 3 Profit
-
How to create a event and assign to task
Hi How to create events in BW and assign to any process.. Like i want to complete a delta load and do the full load. After finishing the delta load, full load has to be triggered. So can anyone help to creating the events in bw and assigning it to th
-
OSB 11g Dashboard not showing any statistics
Hi, I am new to OSB, I have a helloworld OSB proxy service created, and I was able to execute it from OSB test console. I saw the statistics when I first ran the test, but after several days and after I restarted the OSB server several times, the sta
-
HT201303 For added security how do you change the iphone security number to stop hacking
For added security how do you change the iphone security number to stop hacking