Clone source will not accept a negative value

Hi,
I'm using PS CS5 and was trying to create a reflection using the clone stamp tool. However, the height box will not accept a negative value of -100% although the "maintain aspect ratio button" had been turned off. An error message pops up "A value between 1.0% and 400.0% is required. Closest value inserted". I had successfully created a reflection in CS4 previously but it won't work in CS5. Any suggestions, please?

In cs5 instead of entering negative values, use the
Flip horizontal and Flip vertical buttons just to the left
of the width and height.
MTSTUNER

Similar Messages

My mid 2010 MacBook Pro 15 inch unibody battery will not accept a charge

HI there one and all!
                                    My mid 2010 MacBook Pro 15" unibody laptop will not accept a normal charge using the mag safe cord. I have replaced the original battery with a factory new replacement, but I still have the same results.
    The computer powers up and runs only with the mag safe cord attached and when shut down, does not switch from green to orange to indicate the charging mode.
    Can anyone be of assistance or perhaps has had a similar issue? Thanks in advance to anyone for their insight and help. If it makes a difference, my computer information is as follows: MacBook Pro 15", Mid 2010
                                        Processor 2.66 GHz Intel Core i7
                                        Memory.    4 GB 1067 MHz DDR3
                                        Graphics. Intel HD Graphics 288 MB
                                        Serial number. W80---------------
                                        Software     OS X 10.9.4 (13E28)

Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

TS1382 My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible on the screen. The cord works fine to charge my I-Pad.

My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible. The cord works when charging my I-Pad. Any ideas?

Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

I have been attempting to submit my podcast to the Apple iTunes directory. iTunes will not accept my podcast RSS feed.

I have been attempting to submit my podcast to the Apple iTunes directory.
iTunes will not accept my podcast RSS feed.
Apples Response: "We had difficulty reading this feed. Invalid document."
Apple provides a link to: FEED Validator (FOR ATOM AND RSS AND KML)
Here is Feed Validators response to this RSS feed.
"Congratulations!
This is a valid RSS feed.
Recommendations
This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "UTF-8", but your server is reporting "US-ASCII" [help]"
Can you help to resolve this problem, so that my RSS feed will be acceptable;e to iTunes.
Here is the feed: http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Thanks, Bruce

The Server Tech Support helped to create a MIME to solve this problem but Apple is still not accepting the feed & FEED Validator feedback is:
FEED Validator
FOR ATOM AND RSS AND KML
http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Congratulations!
This is a valid RSS feed.
Recommendations
This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
line 2, column 0: Use of unknown namespace: http://www.apple.com/iweb [help]
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" xmlns:iweb="h ...
line 23, column 45: Implausible date: Mon, 6 Aug 2012 15:05:12 -0700 [help]      <pubDate>Mon, 6 Aug 2012 15:05:12 -0700</pubDate>
                                             ^
line 36, column 43: Problematical RFC 822 date-time value: Sat, 1 Jan 11 14:52:58 -0800 (3 occurrences) [help]      <pubDate>Sat, 1 Jan 11 14:52:58 -0800</pubDate>
                                           ^
line 71, column 2: Missing atom:link with rel="self" [help] </channel>
^
line 71, column 2: Missing recommended iTunes channel element: itunes:category [help] </channel>
^
line 71, column 2: The recommended <itunes:email> element is missing [help] </channel>
^
Here is the feed:
http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Any help would be appreciated....

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying."

My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying." How can I make it stop so I can activate iCloud ?

try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.

HT204088 When trying to update my credit account information, it will not accept the month of experation even though it has been entered. I shut the phone down and tried again, I sync it to the computer. Will not work. What do I do?

I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?

Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com

HT204053 Icloud says my Apple Id is valid but it will not accept it to access Icloud

Icloud says my Apple Id is valid but it will not accept it to access Icloud

If the messages says that it is a valid Apple ID but not an iCloud ID, it's becaure you are trying to create an iCloud account on a PC. You can only create the account on an iOS device or Mac (running Lion or Mountain Lion). After creating the account, you can then sign in with the ID on your PC, but you can't create the account on a PC.

When I want receive emails it will not accept my username or password yet when I go to google mail my passwords are accepted

A few weeks ago my ipad lost all the data for using emails like there is no files to put my emails and it will not accept my username or password yet google mail (gmail) will can someone give me some advice please

Thank you; this has worked.
Regards

WET54G v3.1 Will not accept the default password for web setup

The setup:
1 2WIRE wireless router for AT&T DSL connection
1 wireless laptop, online and good to go
1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226. The WET54G is directly connected to the desktop. I open Internet Explorer and go to 192.168.1.226. After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect. I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds). It simply will not accept the password.
Any suggestions? I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me. Extremely frustrating to say the least.
Thanks,
Sean

Hi brickmonkey,
Sorry for taking so long to get back on this. We left for a long vacation and I got ridiculously busy when we got back. ANyway I just spent some time working on this and wanted to report back. Still didn't get it to work.
Got into the 2Wire and wrote down it's settings:
Router Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway. It gave me the error "DUT and Gateway cannot locate in different subnet." Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
Because it wouldn't accept that 151.x.x.x address, I can't get any farther. I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled. I changed the 2WIRE from 1 to 6 in case that was an issue. The WET54G is in Infrastructure mode, as the guide you linked to indicated.
Any thoughts with this new info?
Thanks again for your help with this,
Sean

I am having ongoing connection problems with the Clash of Clans app which means that I lose battles, resources or boost times. This results in a loss of gems which I have purchased but will not be refunded as they will not accept responsibility.

Whilst playing Clash of Clans I will continually lose the internet connection. This means that I lose battles, resources, gold etc and lose boost times. I have informed Supercell who blame my internet connection even though the iPhone, laptop and TV all work fine so it is obviously a technical problem with their game and probably something to do with their last updates.
As I have purchased gems I feel that I should be compensated for my loss but they will not accept responsibility nor investigate the technical issue. The loss of connection occurs constantly with the game often freezing during replays or searching for battles. This is obviously not a connection issue.
What suggestions do you have to resolve this situation?

Hi.
Thanks for the reply. I asked because I also wanted to see if others had encountered the same problem.
I have no problems with my internet connection as I run my TV, laptop and iPhone off the same connection with no problems. I believe that since the recent updates to the game this has caused the problem. The game often freezes, cancels out or returns me to the main game screen during battles or replays.
What I want to know is how do I get the game designers or owners to acknowledge my problem as at this time they keep telling me it is my internet that is a problem and not their game. How do they know this when they refuse to investigate. What can I do and who do I go to for support if they won't accept responsibility?
I am very grateful to you for replying but concerned that if this can happen to me then how many other gamers are losing out and paying for something that they are not going to receive.
Many thanks.

Terminal window blinking cursor will not accept keyboard entry

Have SunBlade100 w/ Solaris8.
This is probably a dumb beginner question...
When I enter certain commands at the terminal window - in this particular case
# cat /dev/cua/a
and I hit <return> the cursor skips to the next line, and
continues blinking , and will not accept any keyboard entries.
1. What is the significance of this? Is the cursor waiting further action, and if so, what?
2. How do I get back to the prompt?
3. Under this condition, is it safe to exit the terminal window by closing from the Window menu? (I can't type "exit" because the cursor won't accept keyboard entries, and Help for "closing the terminal" warns against closing from the Window menu because any background processes will not be terminated (and this may cause problems).
Thanks in advance for any info on this.

Thanks again for the info. <control>+C was exactly what I was looking for. It's coming back to me now-- the last time I had contact w/ UNIX was back in '85 at UC Berkeley (no GUI's back then!).
I'm assuming that <control>+C is a graceful (i.e. relatively harmless way to exit the command.

We have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for syc and icloud, the icloud will not accept the 2 accounts?

we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?

Do you know what happens if you delete the icloud account from an iphone 4s? Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone? I want to associate a different icloud account to the phone.

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sims chip...we are told. We were advised that this model wound work in Euro

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sim chip...we are told. An Apple store employee here said this model is good only in the US. The iPads here take a sim card. We were advised by an Apple Store Employee at home that this model would work in Europe and that we could buy our service here. That does not seem to be the case. We have been told that we must invest in a modem at 200.00€ and then purchase a separate service plan for each country. We can use the free wifi wherever it is available but we cannot connect to the outside world when out of range. Is there anything else we can do?
Thanks, John

Unfortunately, no other solution is available.
Hope this helps

IPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

iPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Where are you entering the Apple ID PW?
What message do yo get when you try?
Have you tried resetting the PW?
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Clone source will not accept a negative value

Similar Messages

Maybe you are looking for