Clone Stamp in mirror direction?

Using the clone stamp tool, when I sample an area to clone, it would follow in the same direction as where my cursor is.
Is it possible to have the sampled area move in the opposite direction? I am fixing a portrait and I need to clone the other symmetrical side.

What version of photoshop?
If it's cs3-cs6 i believe you can do that in the Clone Source Panel.
Window>Clone Source
Or clone or copy the pixels to a new layer and then flip and move the layer into position.

Similar Messages

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Clone Stamp & Paintbrush cursor not displaying on image

Hey there,
When attempting to edit a photo (on PS CS3), the cursor for the paintbrush and clone stamp tools does not display on the image - it'll come up when the mouse isn't directly over it (ie around the borders, & workspace etc, but not on the image itself).
All other tools the cursor will display (eg marque and crop etc).
Is anyone able to offer any help on the subject?
Thanks very much.

If you are using a Wacom, keep the pen well away from the tablet when using the mouse and vice versa.
Try unplugging the Wacom – if the problem disappears, update the drivers.
Or
Try resetting the tools from the little drop-down menu in the Options Bar.
If all else fails, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Will upscaling or using clone stamp/healing brush to upsize give better resolution?

I'm designing a 5.25" square CD cover using a rectangular image and the resolution needs to be min. 300ppi to print . The artist sent me the art image (painting) from her camera as a jpeg and it goes to photoshop as a large (approx 20" X 24") file at 72 ppi. To change the ppi to 300 without resampling (I've been told this is best), the image becomes too narrow (4 1/2") and too high (5.9").
I don't want to crop because I don't want to lose content. I want the image to completely cover the CD cover And I want to keep the same proportions for certain parts of the image. So I believe my two best options are as follows:
1. Bring the image to 300ppi with the measurements above, protect certain parts of the image on an alpha channel, content aware scale the rest of the image wider to make it square and then resize down a bit for the CD cover or
2. Bring the image to 300ppi and then use the clone stamp and healing brush tool or content aware fill (doesn't work so well on this image) to duplicate and extend the sides of the image to widen and square it and then resize down a bit for the CD cover.
Does anyone know which of these options will give the best resolution? Is upscaling more likely to cause pixelization than the other option? Is there a better way? Should I do options 1 and 2 to the large 72 resolution image instead of bringing it to 300ppi first and then upscale or clone stamp--would that give better results?
Thanks, any help is greatly appreciated!

You've said that you don't want to crop, and you want to cover the entire CD cover. That leaves you with two choices. Extend the short side(s) via cloning, content aware fill, etc. or stretch the image in one direction, either with the standard free-transform or with content aware transform. See what looks best. Your resolution will be fine. You can res up if you need to. The amount you're short will not matter here. Leave room for bleed - usually 1/8".

After Effects problem with clone stamp tool

Hi,
I've been using clone stamp tool in Photoshop for years and has no problem with it. But somehow I could never get it work on After Effects. After alt+click to select source I can then click (and hold left mouse button), rub and change the target area as expected but as soon as I let go the mouse button the target area reverts back to original.
What did I do wrong?
thanks.

First question that I have for you is did you look in the help files?. Simply type clone stamp in the search After Effects Help field at the top right corner of the application frame it you will find all kinds of information. There are a few good tutorials linked directly from the help file. After Effects Help | Paint tools: Brush, Clone Stamp, and Eraser
Because After Effects works with video you have to make sure you have the correct options for your clone stamp or your paint tool selected and you are working in the correct window. It is not so much that the clone stamp is not working, it is just that you probably do not have it set up correctly.

Irritating clone stamp in CS4.

Can someone please tell me how to turn off the mirroring aspect of the clone stamp in CS4 & return it to the way it worked in CS3 without magnifying & showing unfamiliar content?
Very many thanks for any help!
Rob

Most people think it's a big help.
Once they learn how to use it!

Clone Stamp Tool and smudge tool issue

iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3; 2.7GHz Intel Core i5; AMD Radeon HD 6770M 512 MB.
Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
Intuos 4 tablet and pen.
Clone Stamp tool Setup:
Layer Adjustment parameter set to either This Layer and Below or All Layers.
All other parameters at default.
Using simple soft brush.
=====================================
The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

Welcome back gang.
Made a couple new discoveries while double checking.
Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
The problem replicates with the Adj layers clipped or not.
The key is any tweak in the Adj layers will cause the issue.
Any Adj layer tweak seems to get exaggerated when smudging on a layer.
For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
I do not know the threshold luminance pixel value but I would guess it is at 128/128.
Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
Tweaking the HSB Saturation slider to +12 will cause color posterization.
Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
Plus, it was probably designed to do so but I do not think it was to be so pronounced.
Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
When did PS add the Sample All Layers option to the Smudge tool?
Anybody else?
================================
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Mac OS 10.7.3
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2700 MHz
Built-in memory: 4096 MB
Free memory: 1738 MB
Memory available to Photoshop: 3384 MB
Memory used by Photoshop: 75 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.18.11
OpenCL Version: 1.1 (Dec 4 2011 16:53:18)
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915206
Video Card Memory: 500 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 930.7G, 700.7G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1642
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1640
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Required plug-ins:
(removed)
Optional and third party plug-ins:
   Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
Plug-ins that failed to load: NONE
Flash:
   onOne
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

Clone Stamp Selection Failure in CS6

I try using the clone stamp but selection fails with this error message:
Could not use the clone stamp because the area to clone has not been defined (Alt-click to define source point).
When I press Alt, I see the characteristic selection bullseye. But, afterwards, a right-click of the mouse reveals an open circle and the error message.
I note that the key works for menu selections (e.g., Alt-File) and other actions.
I have closed PS and re-opened. Reset the clone stamp tool, closed and reopened, etc., to no avail.
/Roger

Mr. Kelly,
That seems to have fixed the problem: left-super+alt. I can live with that!
Regarding the suggestions about remapping - look-and-feel, etc.: the suggested track are not avialalbe under Xubuntu 12.04. And, I would be reluctant to re-map the super-key since it has functional significance when running Win (I have both Win-7 and XP in VMs).
I've bookmarked the wine wiki link for future reference.
WINE: Do you know if CS6 / Bridge / Adobe Raw, etc., work well? I had not thought of trying Wine. I've never had luck with it in the past - a waste of time for few apps that I must run in Win. Since I've got PShop working well in a VM, I'm thinking of sticking with that and not to invite new problems.
Thanks a lot for delving into this for me.
Glad I bought PShop - I've been using The Gimp for a long time but, while taking PS classes at Montgomery College, decided to buy. I'd been looking for knowledge/tips that might help in Gimp but, during the second class, decided to make the leap.
Best regards,
/Roger

Clone Stamp not working in Elements 5

I have tried the trouble shooting sugestions on page 245 of Photoshop Elements 5, The Missing Manual by Barbara Brundage. However, I have been unable to get my clone stamp to work. Previously the clone stamp was working o.k. Do you have any other suggestions that I might try?
Also, are there some good editing advantages/improvements by upgrading to Elements 7 ?

I held the keys down while starting the editor from the welcome screen and
got the box to delete the preferences. However I have not been able to get
the clone stamp to work. The delete preferences must have worked because my
brushes were changed back to the original setting. I normally use a
different setting to show the brushes as circles. I have been trying to
clone with the Size: 21 ps; Mode: Normal; Opacity: 100% and Aligned checked.
I have tried both checking and unchecking Aligned and Sample All Layers. I
tried a different photo but with the same results. When I Alt click to clone
I get a small circle with something similar to a plus sign in the circle.
The Edit shows an "Undo clone stamp" each time I Alt Click and try to clone
but nothing was cloned.
This is the first time that I've encountered this problem.

Is there a Clone Stamp overlay facility in CS2?

Hi - I've got two versions of Photoshop: CS2 version 9, and Elements 9. I've been using Elements for a couple of years for tweaking and cropping photos but have become interested in the restoration and retouching. So I downloaded the (now, free) CS2 from the Adobe website. With its enhanced features, it can work magic but I notice that when using the clone stamp tool, unlike Elements, I don't see an overly within the clone circle, meaning that it's not as easy to match up edges etc before committing with a click. I can't find any reference to a clone stamp overlay option in CS2. Have I missed something? If not, I guess I'll switch between programs.
Thanks

Thanks for this. I thought the difference was about 5 years but I take on board that clone stamp overlay didn't exist with CS2.
As for 'freeness' I downloaded CS2 from the Adobe website for no money, which satisfies my criteria :-)
Thanks again for taking the time to answer my question.

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

Is there anyone having problem with Clone Stamp in CS4?

Good Morning, I am using Photoshop CS4 Extended with Windows Vista Ultimate 64 bit. My computer is a Dell XPS 430, WITH 8GB of ram, 1.5TB of disk space, ATI Radean HD 4800 Series adapter with 512MB memory. When I bring up an image in Photoshop and click on Clone stamp I get the error message "could not use the clone stamp because of a program error." I can still use Clone Stamp, but with some wied reults. Sometime the middle of the brush turns bright white and do nothing. Again it will clone the item clicked on, but would move the spot being cloned. Other times when the brush is move from the spot being cloned it will clone other area without cliking on them.
I have uninstalled and reinstalled Photoshop 4 times. I have created a new account with administrative rights, which I unistalled and reinstalled Photoshop. Two of the times that I uninstalled Photoshop I also used the Photoshop script to make sure all of Photoshop were uninstalled. I have also cleaned the register of Photoshop before reinstalling Photoshop. Another item used to make sure there was no error with Vista was Windows cleanup installed tool.
Yesterday I checked my laptop and I am getting the same results as my PC. The most recent thing that has been updated on both the PC and Laptop was Windows updates and Camera Ram 5.4. Attached is a copy of a wierd result using clone tool. I just clicked on the image and the orange spot appeared. Is there anyone else who is having similar problems with Clone Stamp?

Have you applied the Photoshop 11.0.1 Patch?
Have you updated the video drivers?
If that doesn't help, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Why is the clone stamp no longer transparent?

When I try to clone in versions beyond PS3 the clone stamp is not transparent. I can't see what's underneath, it got fuzzy pixels.
How can I set this to behave the way it used to.
Thanks.
MK

In the Window>Clone Source panel you can adjust how the overlay is shown.
For example, i usually have it set to show the overlay, clipped and opacity at 50%.
It's really a matter of preference though, so you might try some of the different settings and see which one(s) work for you
or you can simply turn the overlay off if that suits you.

Clone Stamp in mirror direction?

Similar Messages

Maybe you are looking for