Clone STamp normal Mode GONE!!

i used the clone stamp in disolve mode, now the normal mode is gone. it does not show up
on the pulldown option. there are about 15 options but "normal" is not one of them?

Hi,
When you open the drop down of the blending modes, you see Dissolve as the first one, just try scrolling the bar at the right of that drop dow, you will find the Normal Mode at the top of that list. It is the first option hence hides as you select another mode like Dissolve or Behind.
Else you ca try Reseting the tool by the first option in the options bar with the Clone tool selected.
Regards,
Swarnima

Similar Messages

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a defect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a de@@@@fect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

The "Sample Field" letters are very dim. After punching several times the right click revels "Clone stamp mode". The next little circle has a line through it and after several right clicks, it says: "turn on to ignore adjustment layers when cloning," Despite this I cannot get any kind of a response to change any of the existing entries. Bob
Robert Mcdonough
[email protected]

When using clone tool, the NORMAL mode has disappeared. How can I reset to get normal back???

I have searched and cannot find a solution for this. The NORMAL mode for the Clone tool (at the top in options) has disappeared. The top two are dissorve and behind. I cannot find out how to reset and don't know what I did to make the "normal mode" option disappear from menu. Please help! Thanks, Jeanne

Sounds like the scroll bar is missing. I've seen a few posts about this happening with the brush tool. Bug?
It can be worked around by using the blend mode shortcuts.
Shortcut key combos to rotate through blend modes
Select the tool (clone tool) then press alt + shift + N to get normal blend mode if on Windows. If on a Mac change that shortcut to opt + shift + N.
Dissolve is probably also missing. The window's shortcut for that if needed is alt + shift + I. On Mac, use opt + shift + I.
Alternately, you can rotate through the blend modes by using the shortcut key combo alt + shift + + on Windows. On Mac, that shortcut will be opt + shift + +. You can also substitute - for the + in that combo to rotate up through the blend mode list instead of down through the blend mode list.
The above shortcut combos work smoothest if you hold in the alt + shift (opt + shift) keys together before you press the letter or + or - key.
These shortcut work combos with any tool that uses a blend mode settings...

Clone Stamp not working in Elements 5

I have tried the trouble shooting sugestions on page 245 of Photoshop Elements 5, The Missing Manual by Barbara Brundage. However, I have been unable to get my clone stamp to work. Previously the clone stamp was working o.k. Do you have any other suggestions that I might try?
Also, are there some good editing advantages/improvements by upgrading to Elements 7 ?

I held the keys down while starting the editor from the welcome screen and
got the box to delete the preferences. However I have not been able to get
the clone stamp to work. The delete preferences must have worked because my
brushes were changed back to the original setting. I normally use a
different setting to show the brushes as circles. I have been trying to
clone with the Size: 21 ps; Mode: Normal; Opacity: 100% and Aligned checked.
I have tried both checking and unchecking Aligned and Sample All Layers. I
tried a different photo but with the same results. When I Alt click to clone
I get a small circle with something similar to a plus sign in the circle.
The Edit shows an "Undo clone stamp" each time I Alt Click and try to clone
but nothing was cloned.
This is the first time that I've encountered this problem.

PS CC Clone Stamp moving whole image?

I have a problem that I hope someone may be able to help me with. When I use the clone stamp I 'Alt-Click' to select a point to clone from. When I try to actually do the cloning the whole image moves on top of the original image. I knew it would be hard to explain so a make a screen capture video of it to explain   Photoshop Problem - YouTube
If anyone knows a cure for this I would greatly appreciate the help. This seemed to start after the last update of CC.
Here is some info about my system. Sorry if I'm not brief.
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3411 MHz
Built-in memory: 7655 MB
Free memory: 5020 MB
Memory available to Photoshop: 6697 MB
Memory used by Photoshop: 100 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1920, bottom=1080, right=0
OpenGL Drawing: Disabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2047
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GT 610/PCIe/SSE2"
gpu[0].RendererID=4170
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.1407"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130209000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].OCLBandwidth=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 96040836709912865871
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Larry\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 931.5G, 635.4G free
C:\, 232.8G, 144.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/10/29-11:47:16   79.548223   79.548223
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/10/25-12:15:59   5.0.24   79.547804
   AdobePDFL.dll   PDFL 2013/10/29-11:47:16   79.508720   79.508720
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/10/29-11:47:16   79.154911   79.154911
   AdobeXMPFiles.dll   Adobe XMP Files 2013/10/29-11:47:16   79.154911   79.154911
   AdobeXMPScript.dll   Adobe XMP Script 2013/10/29-11:47:16   79.154911   79.154911
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/10/29-11:47:16   79.548223   79.548223
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50)   1.000000
   ARE.dll   ARE 2013/10/29-11:47:16   79.548223   79.548223
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/10/29-11:47:16   79.548223   79.548223
   BIBUtils.dll   BIBUtils 2013/10/29-11:47:16   79.548223   79.548223
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/10/29-11:47:16   79.548223   79.548223
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/10/30-13:12:12   79.546835   79.546835
   FileInfo.dll   Adobe XMP FileInfo 2013/10/25-03:51:33   79.154511   79.154511
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.145
   JP2KLib.dll   JP2KLib 2013/10/29-11:47:16   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/10/29-11:47:16   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   ONCore8.dll   ONCore   7.0.0.0
   ONCoreFoundation8.dll   ONCoreFoundation7   7, 0, 0, 0
   ONDocument8.dll   ONDocument   7.0.0.0
   ONProxySupport8.dll   ONProxySupport   1.0.0.0
   PatchMatch.dll   PatchMatch 2013/10/29-11:47:16   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.2.0.36
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/10/30-13:12:12   79.546835   79.546835
   ScriptUIFlex.dll   ScriptUIFlex 2013/10/30-13:12:12   79.546835   79.546835
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
Required plug-ins:
   3D Studio 14.2.1 (14.2.1 x001)
   Accented Edges 14.2.1
   Adaptive Wide Angle 14.2.1
   Angled Strokes 14.2.1
   Average 14.2.1 (14.2.1 x001)
   Bas Relief 14.2.1
   BMP 14.2.1
   Camera Raw 8.4.1
   Camera Raw Filter 8.4.1
   Chalk & Charcoal 14.2.1
   Charcoal 14.2.1
   Chrome 14.2.1
   Cineon 14.2.1 (14.2.1 x001)
   Clouds 14.2.1 (14.2.1 x001)
   Collada 14.2.1 (14.2.1 x001)
   Color Halftone 14.2.1
   Colored Pencil 14.2.1
   CompuServe GIF 14.2.1
   Conté Crayon 14.2.1
   Craquelure 14.2.1
   Crop and Straighten Photos 14.2.1 (14.2.1 x001)
   Crop and Straighten Photos Filter 14.2.1
   Crosshatch 14.2.1
   Crystallize 14.2.1
   Cutout 14.2.1
   Dark Strokes 14.2.1
   De-Interlace 14.2.1
   Dicom 14.2.1
   Difference Clouds 14.2.1 (14.2.1 x001)
   Diffuse Glow 14.2.1
   Displace 14.2.1
   Dry Brush 14.2.1
   Eazel Acquire 14.2.1 (14.2.1 x001)
   Embed Watermark 4.0
   Entropy 14.2.1 (14.2.1 x001)
   Extrude 14.2.1
   FastCore Routines 14.2.1 (14.2.1 x001)
   Fibers 14.2.1
   Film Grain 14.2.1
   Filter Gallery 14.2.1
   Flash 3D 14.2.1 (14.2.1 x001)
   Fresco 14.2.1
   Glass 14.2.1
   Glowing Edges 14.2.1
   Google Earth 4 14.2.1 (14.2.1 x001)
   Grain 14.2.1
   Graphic Pen 14.2.1
   Halftone Pattern 14.2.1
   HDRMergeUI 14.2.1
   IFF Format 14.2.1
   Ink Outlines 14.2.1
   JPEG 2000 14.2.1
   Kurtosis 14.2.1 (14.2.1 x001)
   Lens Blur 14.2.1
   Lens Correction 14.2.1
   Lens Flare 14.2.1
   Liquify 14.2.1
   Matlab Operation 14.2.1 (14.2.1 x001)
   Maximum 14.2.1 (14.2.1 x001)
   Mean 14.2.1 (14.2.1 x001)
   Measurement Core 14.2.1 (14.2.1 x001)
   Median 14.2.1 (14.2.1 x001)
   Mezzotint 14.2.1
   Minimum 14.2.1 (14.2.1 x001)
   MMXCore Routines 14.2.1 (14.2.1 x001)
   Mosaic Tiles 14.2.1
   Multiprocessor Support 14.2.1 (14.2.1 x001)
   Neon Glow 14.2.1
   Note Paper 14.2.1
   NTSC Colors 14.2.1 (14.2.1 x001)
   Ocean Ripple 14.2.1
   Oil Paint 14.2.1
   OpenEXR 14.2.1
   Paint Daubs 14.2.1
   Palette Knife 14.2.1
   Patchwork 14.2.1
   Paths to Illustrator 14.2.1
   PCX 14.2.1 (14.2.1 x001)
   Photocopy 14.2.1
   Photoshop 3D Engine 14.2.1 (14.2.1 x001)
   Photoshop Touch 14.0
   Picture Package Filter 14.2.1 (14.2.1 x001)
   Pinch 14.2.1
   Pixar 14.2.1 (14.2.1 x001)
   Plaster 14.2.1
   Plastic Wrap 14.2.1
   PNG 14.2.1
   Pointillize 14.2.1
   Polar Coordinates 14.2.1
   Portable Bit Map 14.2.1 (14.2.1 x001)
   Poster Edges 14.2.1
   Radial Blur 14.2.1
   Radiance 14.2.1 (14.2.1 x001)
   Range 14.2.1 (14.2.1 x001)
   Read Watermark 4.0
   Reticulation 14.2.1
   Ripple 14.2.1
   Rough Pastels 14.2.1
   Save for Web 14.2.1
   ScriptingSupport 14.2.1
   Shake Reduction 14.2.1
   Shear 14.2.1
   Skewness 14.2.1 (14.2.1 x001)
   Smart Blur 14.2.1
   Smudge Stick 14.2.1
   Solarize 14.2.1 (14.2.1 x001)
   Spatter 14.2.1
   Spherize 14.2.1
   Sponge 14.2.1
   Sprayed Strokes 14.2.1
   Stained Glass 14.2.1
   Stamp 14.2.1
   Standard Deviation 14.2.1 (14.2.1 x001)
   STL 14.2.1 (14.2.1 x001)
   Sumi-e 14.2.1
   Summation 14.2.1 (14.2.1 x001)
   Targa 14.2.1
   Texturizer 14.2.1
   Tiles 14.2.1
   Torn Edges 14.2.1
   Twirl 14.2.1
   Underpainting 14.2.1
   Vanishing Point 14.2.1
   Variance 14.2.1 (14.2.1 x001)
   Variations 14.2.1 (14.2.1 x001)
   Water Paper 14.2.1
   Watercolor 14.2.1
   Wave 14.2.1
   Wavefront|OBJ 14.2.1 (14.2.1 x001)
   WIA Support 14.2.1 (14.2.1 x001)
   Wind 14.2.1
   Wireless Bitmap 14.2.1 (14.2.1 x001)
   ZigZag 14.2.1
Optional and third party plug-ins:
   Perfect Effects 8 8.1.0
   Perfect Effects 8 Filter 8.1.0
   Perfect Effects 8 Smart Filter 8.1.0
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE
Thanks to anyone who can understand the above

Open the Clone source panel, and recheck 'Clipped'.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Problem with Clone Stamp Tool Transparency

Hi there, I am working in CS5 and lately when I have been drawing with the Clone stamp tool, the cloned content seems to be transparent instead of being a 100% opaque clone of the source. The tool is in normal mode but the result looks almost identical multiply mode. I am coming from CS3 and I have not run into this problem in the past. Any pointers would be greatly appreciated.

…and the align sample to current layer is checked on.
This implies that you need to understand what the settings actually do. You have a choice "current layer", "current and below" or "all layers". These have nothing to with Align, they are all about which layers are sampled.
"Aligned" is about where multiple clicks of the Clone Stamp sample from. How they relate to the source area that you sampled.
Opportunity to air a major complaint of mine - "Aligned" automatically keeps checking itself. Because some Grandpa (photoshop 6 or 7 can't remember) decided that Option double click should be a 'shortcut' to keep Aligned checked all the time. Because they always work with Aligned on I guess, they think everyone should. Unfortunately it means that if you are a fast and experienced user, you have to waste a fair amount of time each day locating a tiny checkbox, to turn the damn thing off again. And again. And again.

Healing Brush = Clone Stamp when used on separate layer?

I can't find corroboration on the web so I want to konw if anyone here has seen this - when using the Healing Brush tool in Normal mode, the opacity of the cloned pixels when painted onto the same layer as the source pixels will usually be decreased to blend better, BUT if the cloned pixels are painted onto a separate layer (to work non-destructively) the tool will NOT decrease opacity and the Healing Brush will work more like (if not exactly like) the Clone Stamp - true??

Hmm, It seems to be working differently for me now. Probably me being tired . I guess I'm just learning how it works. Here are some tests I just did. The top left is a cloned section using the Healing Brush with the "Current Layer" setting - looks identical to the original (even when not sitting on top of the original bg layer), and also looks just like the Clone Stamp (using either setting). The bottom left is a cloned section using the Healing Brush with the "All Layers" setting – NOTICE THE BLENDED OPACITY (as one would expect it to work).
I guess this is the normal difference of the two different Healing Brush settings...?
I'm working in both CS5.1 and CC (trial version). Thanks.

Clone stamp problems

For some reason I can no longer use the Clone stamp option correctly. The Mode option allows me to choose only from Dissolve or Behind, but I cannot set "Normal" mode, it does not even appear on the list. If I try to clone, the stamp pixelates and destroys the part of the image I am trying to clone. If I select the Pattern stamp, then "Normal" does appear.
Elements 10, Windows XP
I would appreciate your help.

Sounds like the scroll bar is missing.
Do you see the other blend modes below Behind such as Darken, Multiply etc?
Three ways you can get Normal mode:
1. use the arrow keys on the numeric keypad to sroll thriough the blend modes
2. press an hold were it says dissolve and move the mouse up. That should reveal the Normal mode.
3. press Shift+Alt+N to get the normal mode.
I had that problem on xp with photoshop elements 7 and here's what fixed it, bringing back the scroll bar:
(it says for the type tool, but it should work for the brush mode list as well)
http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

Clone Stamp Tool and smudge tool issue

iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3; 2.7GHz Intel Core i5; AMD Radeon HD 6770M 512 MB.
Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
Intuos 4 tablet and pen.
Clone Stamp tool Setup:
Layer Adjustment parameter set to either This Layer and Below or All Layers.
All other parameters at default.
Using simple soft brush.
=====================================
The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

Welcome back gang.
Made a couple new discoveries while double checking.
Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
The problem replicates with the Adj layers clipped or not.
The key is any tweak in the Adj layers will cause the issue.
Any Adj layer tweak seems to get exaggerated when smudging on a layer.
For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
I do not know the threshold luminance pixel value but I would guess it is at 128/128.
Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
Tweaking the HSB Saturation slider to +12 will cause color posterization.
Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
Plus, it was probably designed to do so but I do not think it was to be so pronounced.
Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
When did PS add the Sample All Layers option to the Smudge tool?
Anybody else?
================================
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Mac OS 10.7.3
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2700 MHz
Built-in memory: 4096 MB
Free memory: 1738 MB
Memory available to Photoshop: 3384 MB
Memory used by Photoshop: 75 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.18.11
OpenCL Version: 1.1 (Dec 4 2011 16:53:18)
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915206
Video Card Memory: 500 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 930.7G, 700.7G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1642
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1640
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Required plug-ins:
(removed)
Optional and third party plug-ins:
   Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
Plug-ins that failed to load: NONE
Flash:
   onOne
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Clone Stamp Tool limitations?

When I try to use the clone stamp tool it seems it will paint over light colored areas but not dark colored areas. Am I doing something wrong, or is this a limiting characteristic built into this tool?

Verify the blend mode in the top tool bar. It may be set to something other than normal.

Clone stamp tool question

When I am using my clone stamp tool, the area I want to change is still there... What am I doing wrong?

Could be lots of reasons.
Do you have an active selection and are trying to clone outside it?
Do you have 'Current layer only' checked in the options bar, and no source pixels to clone from?
Do you have a blend mode other than Normal set for the clone tool in the Options bar?
Is the clone tool Opacity or Flow set very low in the Options bar?

Clone stamp behaving oddly

i accidentally hit a wrong key when trying to get the clone stamp going and now it brings up a box with changing icons in it (see upper left of attached image). and it doesnt work. how can i get clone stamp back to normal?

got it--thanks!
what's weird is that the gray box in top left would not go away. i was gonna write you back, but then it just disappeared.
meanwhile, my cursor turned into a spattered pattern of slanted lines. but then that too resolved.
did i just go into some alternate photoshop universe?

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

I've been using clone stamp tool option-click (healing brush option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday. Had just used it on Sunday. So, I've tried to isolate the problem.
1. Went to Apple store and my keyboard and mouse work fine on their inhouse systems running Photosochop CS5. Problem still exists on home system.
2. Adobe photoshop suggested I go back to Mac 10.6.3. I did and problem still exits.
3. Reset all presets in CS5. Problem still exists.
4. Spent several hours with Adobe Photoshop tech on phone -- he couldn't make it work remotely either using his keyboard. Reloaded Photoshop from scratch. Problem still exists.
Question:
Could this be a hardware problem? Graphic board problem?
Or is this a software problem aside from Mac OS and CS5?

Hi Joan
It sounds like you are not having fun at all : )
>I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
.....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
..... I wonder why the guru thought your system was gone if your new user account was working?
If your new user account is working.... why not use it? The system seems fine but something went screwy with the settings in your original account.
hopefully someone else will chime in here with more insight before you start from scratch.

Clone STamp normal Mode GONE!!

Similar Messages

Maybe you are looking for