Clone Stamp Tool and Healing Brush not working - why?

As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined".   Well, this is not the case since I did define it with command Alt + left mouse click.
Background:
Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
   tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
    at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Similar Messages

  • Clone Stamp Tool in CS6 Will Not Work on Tiff Files

    All of a sudden the Clone Stamp Tool does not work when working on a tif file. Yes I get the Circle with + sign when I press the ALT Key but tool will not clone.

    Hi Trevor!
    I found out that it affects all file extensions.  Files were created after adjustments in Bridge. Layer is not locked. Opacity is at 46. Now as I reviewed your answer, I was looking at a FAQ about the same thing. Truthfully I did not know that you could reset tools.
    I found out how to reset the CSTool and voila!!! Now works fine.
    Thanks for the advice...
    Dan

  • Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

    I've been using clone stamp tool option-click (healing brush  option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped  working suddenly on Monday.  Had just used it on Sunday.  So, I've tried  to isolate the problem.
    1. Went to Apple store and my keyboard and  mouse work fine on their inhouse systems running Photosochop CS5.   Problem still exists on home system.
    2. Adobe photoshop suggested I go back to Mac 10.6.3.  I did and problem still exits.
    3. Reset all presets in CS5.  Problem still exists.
    4.  Spent several hours with Adobe Photoshop tech on phone -- he couldn't  make it work remotely either using his keyboard.  Reloaded Photoshop  from scratch.  Problem still exists.
    Question:
    Could this be a hardware problem?  Graphic board problem? 
    Or is this a software problem aside from Mac OS and CS5?

    Hi Joan
    It sounds like you are not having fun at all : )
    >I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
    .....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
    ..... I wonder why the guru thought your system was gone if your new user account was working?
    If your new user account is working.... why not use it?  The system seems fine but something went screwy with the settings in your original account.
    hopefully someone else will chime in here with more insight before you start from scratch.

  • Clone Stamp Tool & Spot Healing Brush Tool going wild

    Both of subject tools often 'go wild' on me when I am working on an image. Either tool will race across an image in a straight line and leave either a cloning or spotting mark [straight line].
    I suspect this has something to do with insufficient memory.  However I have 4 GB RAM and am not running any other big program while doing the cloning/spotting.
    Even if I 'give it some rest' this strange behavior will continue.
    Any help would be greatly appreciated!
    christian
    ps.  Attached is a tiny sample, circled in red.

    It is essential to update Photoshop to version 11.0.1!
    If that doesn't help, see if it still happens with OpenGL turned off.
    Is that two video cards?  Neither number is shown on the Adobe list.
    http://kb2.adobe.com/cps/405/kb405711.html

  • Healing brush/Clone stamp tool and others very slow processing

    Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated.  Thanks

    Thanks for the answer.
    I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
    I'll try to get the Photoshop system info as soon as possible.
    Thanks again.
    Zee

  • Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

    adobe photoshop elements 9 , i cannot get the circle  to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

    I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
    1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
    2. Under Painting Cursors, select Full Size Brush Tip
    3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
    4. Click ok.
    Now use the brush, and it should have a circle to use.
    P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

  • When using the clone stamp tool and press the alt key layer just moves

    when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

    Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

  • Photos fail to print after editing with clone stamp tool and layers

    After editing using the clone stamp tool and using layers the photos fail to print.  I even tried a simple crop edit and the photo failed to print.
    Photos print without editing.

    Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
    I tried printing from Organizer and editor and I have the image saved on my desktop
    I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
    I have left it sit overnight but it never produced a photo.
    The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

  • Content aware move tool and recompose do not work.

    Content aware move tool and recompose do not work. Nothing happens...What can I possible do wrong?

    There is not Content Aware Move or Recompose tool in Premiere Elements.
    Have you tried taking this question to the Photoshop Elements forum, Dion?

  • Clone Stamp and Healin Brush not Working

    I am also having problems with this healing brush and clone stamp tool
    I am running Windows 7 (64 bit on a powerful computer with 6 Gb Ram and pleanty of HDD space.)
    I am using a wired mouse and do not have a tablet connected.
    I have duplicated the Background as a backgound copy ab\nd mad the backgound invisible ther backgound copy layer is selected and is made visible.
    Clicking on the either tool, I move the cursor to the source area I wish to clone from and [Alt]-Click. I then try to love the cursor to the destination area, the part I want to cover up with material from the source area.
    What happens is the entire image moves showing as I move the mouse, revealing an other image below that does not move.
    Either I do not understand what these tools are supposed to do, (I doubt that because I have used this tool several times in PSE 6 without problems.) or there is something terribly wrong with the program.
    I underststand, fronm reading the forums that the same problem exists in CS4.
    I have checked for updates but the only update that I have not downloaded and installed is support for Raw files from newer cameras.
    PS The files I am working on are originally JPGs and have not been converted from any other file type.
    Below is a screen shot illustrating the offset image.
    Thanks for any help you may offer.
    BTW Does Adobe support this program? I can only find help this kind of help in the forums.

    Hi,
    This looks like you have the overlay feature turned on for the tool. When you select the clone or healing brush, look up in the options bar and select the icon for more options. Uncheck the box that says "Overlay".  I am not sure if each one is independently set in Elements or if a check mark turning on or off overlay effects both tools as it does with Photoshop.
    I don't have a copy of Elements that includes this feature but on the option bar the icon that you need to click is located below where it says "sign in" in the editor...to the right of where it says "all layers"---square icon.
    Edit: See Post #1 in which Barbara has a screen shot showing where to look in Elements to turn on/off the screen overlay feature.
    http://forums.adobe.com/thread/738288
    Edit: I see while I was increasing my neighbor's herd of cows...MTSTUNER has posted another screenshot of the options panel. I'll leave this up anyway just in case you also have CS4.
    This is a screen shot of The clone source palette settings that control the overlay in Photoshop CS3.  I'll include this screenshot of where to look in Photoshop just in case you also have CS4 since you mentioned looking through the Photoshop forum for the answer.  In Photoshop, this feature can be turned on/off in the clone source palette. The check mark will effect both clone stamp and healing brush...they share the current setting.
    I actually forgot that this feature also effected the healing brush as well as the clone stamp. Want to guess how I keep mine set? LOL.
    To be fair, I guess looking at this image I could see with a low opacity setting how it could be useful if I wanted to increase this herd of cows.

  • Clone Stamp Tool and smudge tool issue

    iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3;  2.7GHz Intel Core i5;  AMD Radeon HD 6770M 512 MB.
    Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
    Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
    Intuos 4 tablet and pen.
    Clone Stamp tool Setup:
    Layer Adjustment parameter set to either This Layer and Below or All Layers.
    All other parameters at default.
    Using simple soft brush.
    =====================================
    The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
    Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

    Welcome back gang.
    Made a couple new discoveries while double checking.
    Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
    The problem replicates with the Adj layers clipped or not.
    The key is any tweak in the Adj layers will cause the issue.
    Any Adj layer tweak seems to get exaggerated when smudging on a layer.
    For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
    I do not know the threshold luminance pixel value but I would guess it is at 128/128.
    Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
    Tweaking the HSB Saturation slider to +12 will cause color posterization.
    Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
    Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
    In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
    My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
    Plus, it was probably designed to do so but I do not think it was to be so pronounced.
    Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
    When did PS add the Sample All Layers option to the Smudge tool?
    Anybody else?
    ================================
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Mac OS 10.7.3
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 2700 MHz
    Built-in memory: 4096 MB
    Free memory: 1738 MB
    Memory available to Photoshop: 3384 MB
    Memory used by Photoshop: 75 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-7.18.11
    OpenCL Version: 1.1 (Dec  4 2011 16:53:18)
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915206
    Video Card Memory: 500 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 930.7G, 700.7G free
    Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1642  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1640  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Required plug-ins:
    (removed)
    Optional and third party plug-ins:
       Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Cs5 Healing Brush not working @ 32bit channel on openExr format

    Hi..
    Cs5 Healing Brush not supporting 32bit workflow.. if i want to work on hdr 32bit EXR, the Healing brush not supporting at all. if i want to work i ve to convert them into 16bit.. why its like.. that..?  if i convert 32->16->32 is it possible any color loss.?. can any one  explain technically ...
    in cs5 if i try to change 16bit its asking hdri tone maping.. how could skip this process. i just want to convert 16bit and few touch-ups with healing brush. and i want to revert to 32bit. this convertion process causes any color info..
    i want to keep my data in to 32float itself. and i want to use healing brush..
    Thanks
    panner

    can any one  explain technically ...
    Because the author of the healing brush code hasn't updated it (or related tools) to work in 32 bit/channel yet.
    (and the person who wrote most of the 32 bit support code couldn't untangle that code to get it working himself)

  • In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

    I don't quite know how to use the clone stamp tool in the Photoshop 2014 version.  When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct.  How do you lock it down to keep it from moving?

    Hi Smoothery4501,
    The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
    Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
    Please refer to below blog for further info
    Clone Stamp Tool « Julieanne Kost's Blog
    Thanks

  • Clone stamp tool and image processing

    Hello, I am not able for some reason to apply clone stamp tool to multiple pictures at a time using image processing, I just get the first picture saved with the effect and the rest as they were. Could someone help me out with this? I have around 200 pictures and I need to remove damage from all of them quickly. Or is it not possible? Thank you!

    After that time ten years Adobe added a new feature that enable you to record tools use. However the feature was not well designed recorded various amount of data depending on machine.  Has some restrictions also.  The feature is not compatible with everything as I wrote Adobe Disable this feature when its Plug-in Scriptlistener is installed.  I never found a good use for the feature. Note: my option is grayed out because I install Scriprlistener.

  • Clone stamp tool and keyframing

    How do I animate with the clone stamp tool? For example I have some footage and I want to use the clone stamp tool frame by frame. I know how to use the tool right now but whatever I paint out is staying on for every frame.

    From this page:
    Common paint tool settings in the Paint panel
    Duration
    The duration of the paint stroke. Constant applies the stroke from the current frame to the end of the duration of the layer. Single Frame applies the stroke to the current frame only. Custom applies the stroke to the specified number of frames, beginning with the current frame. Write On applies the stroke from the current frame to the end of the duration of the layer and animates the End property of the stroke to match the motion with which the stroke was drawn.
    I would suggest reading more on that page. Also, you'll probably find this page helpful as well.

Maybe you are looking for

  • UDF field in Crystal in Sales Order Layout

    Hi, I want to Include UDF field in sales order layout, when i open default layout it shows only standard in RDR1(UDF for rowlevel ) it doesn't shows UDF fields. Now i connected database and re-established OLE DB connection and pulled the RDR1 table,

  • What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

    My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC.  My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service.  This came with a new modem/router combo made by Cisco and is model

  • Hello all I am having problems viewing my flash buttons on my website

    Hello all I am new to creating my own websites. I am using DW8. At the moment all is going ok as I have managed to get my home page up and running, though my website is far from over i have decieded to add flash buttons. Now when i preview the site i

  • Problem with LiveCycle 8.0 Form in Acrobat 7.0

    I have created a form in LiveCycle 8.0 that contains text fields that have multiple lines enabled, are sized to fit height, and are in subforms that are set as flowed and allowed to break across pages. When I test the form in Acrobat 8.0, the fields

  • Cmp bean - change to the database column not accepting

    Hi, I have a CMP Entity bean defined within the application. I had to change the column size of one of the table defined database. It was changed for 1 character to 3. But while inserting the records through the application the EJB still seems to con