Clone stamp tool and image processing

Hello, I am not able for some reason to apply clone stamp tool to multiple pictures at a time using image processing, I just get the first picture saved with the effect and the rest as they were. Could someone help me out with this? I have around 200 pictures and I need to remove damage from all of them quickly. Or is it not possible? Thank you!

After that time ten years Adobe added a new feature that enable you to record tools use. However the feature was not well designed recorded various amount of data depending on machine.  Has some restrictions also.  The feature is not compatible with everything as I wrote Adobe Disable this feature when its Plug-in Scriptlistener is installed.  I never found a good use for the feature. Note: my option is grayed out because I install Scriprlistener.

Similar Messages

  • Healing brush/Clone stamp tool and others very slow processing

    Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated.  Thanks

    Thanks for the answer.
    I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
    I'll try to get the Photoshop system info as soon as possible.
    Thanks again.
    Zee

  • Photos fail to print after editing with clone stamp tool and layers

    After editing using the clone stamp tool and using layers the photos fail to print.  I even tried a simple crop edit and the photo failed to print.
    Photos print without editing.

    Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
    I tried printing from Organizer and editor and I have the image saved on my desktop
    I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
    I have left it sit overnight but it never produced a photo.
    The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

  • Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

    adobe photoshop elements 9 , i cannot get the circle  to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

    I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
    1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
    2. Under Painting Cursors, select Full Size Brush Tip
    3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
    4. Click ok.
    Now use the brush, and it should have a circle to use.
    P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

  • Clone Stamp Tool and Healing Brush not working - why?

    As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
    When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined".   Well, this is not the case since I did define it with command Alt + left mouse click.
    Background:
    Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
    I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

    Do you mean photoshop elements 7 and not premiere elements?
    The fix posted above only applies to linux os systems, which is
    different from mac and windows.
    On windows vista Alt+left click is to set the clone source.
    Try the following steps one at a time.
    1. reset the clone stamp tool by clicking triangle on the far left of the
       tool options bar and select reset tool.
    2. Go to Edit>Preset Manager and click Done in the dialog that appears.
    3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
        at the same time you start elements 7. In the dialog that appears, click yes.
    Hope this helps.
    MTSTUNER

  • When using the clone stamp tool and press the alt key layer just moves

    when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

    Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

  • In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

    I don't quite know how to use the clone stamp tool in the Photoshop 2014 version.  When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct.  How do you lock it down to keep it from moving?

    Hi Smoothery4501,
    The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
    Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
    Please refer to below blog for further info
    Clone Stamp Tool « Julieanne Kost's Blog
    Thanks

  • Clone Stamp Tool and smudge tool issue

    iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3;  2.7GHz Intel Core i5;  AMD Radeon HD 6770M 512 MB.
    Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
    Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
    Intuos 4 tablet and pen.
    Clone Stamp tool Setup:
    Layer Adjustment parameter set to either This Layer and Below or All Layers.
    All other parameters at default.
    Using simple soft brush.
    =====================================
    The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
    Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

    Welcome back gang.
    Made a couple new discoveries while double checking.
    Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
    The problem replicates with the Adj layers clipped or not.
    The key is any tweak in the Adj layers will cause the issue.
    Any Adj layer tweak seems to get exaggerated when smudging on a layer.
    For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
    I do not know the threshold luminance pixel value but I would guess it is at 128/128.
    Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
    Tweaking the HSB Saturation slider to +12 will cause color posterization.
    Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
    Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
    In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
    My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
    Plus, it was probably designed to do so but I do not think it was to be so pronounced.
    Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
    When did PS add the Sample All Layers option to the Smudge tool?
    Anybody else?
    ================================
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Mac OS 10.7.3
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 2700 MHz
    Built-in memory: 4096 MB
    Free memory: 1738 MB
    Memory available to Photoshop: 3384 MB
    Memory used by Photoshop: 75 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-7.18.11
    OpenCL Version: 1.1 (Dec  4 2011 16:53:18)
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915206
    Video Card Memory: 500 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 930.7G, 700.7G free
    Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1642  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1640  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Required plug-ins:
    (removed)
    Optional and third party plug-ins:
       Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Clone stamp tool and keyframing

    How do I animate with the clone stamp tool? For example I have some footage and I want to use the clone stamp tool frame by frame. I know how to use the tool right now but whatever I paint out is staying on for every frame.

    From this page:
    Common paint tool settings in the Paint panel
    Duration
    The duration of the paint stroke. Constant applies the stroke from the current frame to the end of the duration of the layer. Single Frame applies the stroke to the current frame only. Custom applies the stroke to the specified number of frames, beginning with the current frame. Write On applies the stroke from the current frame to the end of the duration of the layer and animates the End property of the stroke to match the motion with which the stroke was drawn.
    I would suggest reading more on that page. Also, you'll probably find this page helpful as well.

  • Clone stamp tool - can't turn 'aligned sample' option off

    HI, I am experiencing a problem with the clone stamp tool and healing brush tool where I uncheck the 'aligned sample' optiom, 'alt' click where I want the sampling to come from, then brush over the area I want to be affected.  I have noticed that the results are the same as when the 'algned sample' option is on; the sampling is clearly following the brush just as when 'aligned sample' is checked.  I have reset the tool with no effect.  Anyone have a solution?
    Thanks

    Just to clarify, the Aligned option will cause multiple brush strokes to copy from the sampled area as though you had duplicated the sampled layer, hidden it with a mask, and now revealing it. With Aligned off, each brush stroke returns to the sampled area. For example, if you have cloned from a layer with the image of a face, sampling in one of the eyes, multiple brush strokes with Aligned on will result in the face filling in stroke by stroke. With Aligned off, a new eye will be cloned with each brush stroke. And by brush stroke I mean clicking and releasing mouse button.
    If this is the behavior you are expecting by not getting and resetting the tool did not fix things, then it is time to reset the application preferences:
    http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

  • Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

    hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

    Good day!
    What kind of Layer is selected, is the Layer locked, …?
    Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
    Regards,
    Pfaffenbichler

  • Changing In and Out point on duration of Clone Stamp tool.

    Hi guys.
    I'm sure topic of this question is quite confusing so here is a clearer explanation.
    What I'm trying to do is to use clone stamp tool on a frame by frame basis to remove some elements. There is a lot of them so I will have many layers in Effects > Paint > Clone 1, Clone 2 etc. Each one of them is only needed for one or two frames and I was wondering if there is a quick way (shortcut for example) to set "out point" for that effect without grabbing them individually from the far right end and dragging it to the left.
    I'm attaching an example of what I'm doing
    I hope there is a simple solution to this as I will have hundreds of these and I would really appreciate some time saving magic.
    Thanks a lot guys.

    alt+]
    or
    opt+]
    There is a list of keyboard shortcuts in the AE help documents.

  • Clone Stamp Tool does not work

    This is a re-post of an old problem. Using PS CS4 Extended v. 11.0.2 in Win XP SP3.
    The clone stamp tool does not alter my image. After selecting source region, cursor hovers over the target region and the preview looks like what one would expect. After clicking, however, the desired change does not occur.
    Uninstalled PS and reinstalled. Clone stamp worked for a while, then quit working again.
    Image seems to be OK, in that I can open it on my Laptop with CS3 on Win Vista, do my cloning, save and all works fine.
    Any ideas appreciated. I may uninstall and reinstall again, but if I do, would like some ideas of what I should monitor as I go through my work process.

    Jack wrote:
    The second method worked. Many thanks.
    To avoid this happening again, would appreciate any idea on what to look for in my Preferences.
    Glad it fixed it.
    When the preferences get corrupted it is not due to a wrong setting. One of the files has been damagrd. This is a known problem with computers not just Photoshop.
    It can be caused by incorrect shut-downs, hard drive faults, or a dozen other reasons. Deleting the preferences just lets Photoshop generate a fresh set at factory default.
    Make sure you check through to get your personal settings back and then save a copy.

  • "Could not use the clone stamp tool because of a program error". How to fix this fault?

    When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
    I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

    Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

  • A problem using clone stamp tool

    Hi guys,
    I use After Effects CC last version on a pc under windows 7 ultimate..
    This problem must be simple to solve but I just don't see how.
    I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
    I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
    I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
    But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
    Thanks in advance
    Claude

    OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
    Now you only have perspective issues to deal with.
    Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
    I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint  the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
    Here's a tutorial on how to apply tracking data to a clone stamp in AE:
    Removing an Object with Clone Stamp - After Effects Tutorial
    I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

Maybe you are looking for

  • Unchecking Check WS-I compliance - get web service hangs

    After pressing "Get WebService Information" when adding a Web Service the IDE hangs if the Check WS-I Basic Profile 1.0 compliance checkbox is unchecked. Using the same WSDL file with the checkbox checked the Web Services are displayed (but with warn

  • How to Disable the CD Drive

    Help! My CD drive quit working on me, so I decided to buy an external CD drive. Whenever I try to use the new drive, my old drive (that no longer reads CDs) opens and tries to take over, making it difficult to use the new one. Is there a way that I c

  • Flagged photos from events were removed from events and placed in a flagged folder

    Hi, I have created several events in iphoto, flagging my favorite pictures.  The pictures used to show up in each event with a flag in the corner of the picture.  Now they have been removed from the events they were in and put in a "flagged" folder o

  • Where can I find iCal

    Where can I find the app iCal ?

  • Too many payments taken for my Skype Credit

    Hi I would like to know where I can report about 4 payments taken in one day eg May 23rd, 2013 for my Skype Credit account. Instead of only one payment of $40AUD being taken, there were four payments credited to my Credit Card. This should not have h