Clone stamp tool error

I am attempting to use the brush in Photo shop element 8....I am running windows vista.
I get error message "could not use the clone stamp tool because the area to clone has not been defined (Alt-click to define source point)"
I have never had to Alt-click to use the brush, however with that said when I now attempt to alt-click it still will not work, I have reset the brush tools to default, and I have also done someone ' method of double clicking.  I have no other programs running and I am on the appropriate layer.  I am besides myself and need access to it ASAP for a project that I am working on.
Any suggestion... I saw that someone else was running another OS and had talked about the computer program is having interference with the alt key and to manually switch the computer so the super key (window key next to it) acts as the ALT key, however I haven't located how to do that yet on my program.

I want to add that I switched to a darker background and now, after I define the source I can see the brush that I am using but is very faint and only matches the background color. even though I have selected black as the color of the brush...I can see my stamp if I switch it to the patterend stamp tool but I can not get it too be shown in black.  I have added a new layer on top of it and have the opacity set to 100 percent...Im at a loss?
I have never had such problems before....

Similar Messages

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • Program error when trying to use the clone stamp tool - PSE 8

    When trying to use the CLONE STAMP TOOL, getting the following:  "Could not use the clone stamp tool because of a program error".
    Runnng PSE 8 on Windows XP/SP3.  I purchased the key to have a full version, versus the 'trial version'.  I also have Photo Essentials 3 installed and have used it without any problems.
    Any suggestions?

    I figured it out - it was ID 10 T error...ugh.
    Was following along in a book and blindly did what it said....was forgetting to hit the 'alt' key when first defining the area to clone....
    However, it was kind of a confusing error message - something like "clone area not defined" would be more of a help.
    thanks.

  • "Could not use the clone stamp tool because of a program error". How to fix this fault?

    When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
    I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

    Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

  • Clone stamp tool

    I have just upgraded from a trial version.And I am having a problem with the clone stamp tool it shows an error message,I have tried download the softwear again but still no luck.Also the boxes in the right hand corner are grey rather than coloured are they supposed to be.

    Hi,
    It seems you are using PSE9. Then the colors of the Edit, Create and Share tabs are removed. They are now in shades of Gray. But that should not be related to your facing problems with the Clone stamping tool
    Did you try : reset tool option from the arrow in the extreme left of the options bar.
    else you can also try the following steps:
    1) Close PSE editor if open
    2) Go to Welcome screen
    3) Press and Hold Ctrl+ Alt + Shift, and click on Editor.
    4) Hold the keys till you get a dialog asking you to delete the prefrences.
    5) Click yes.
    6) try again.
    Please share the results after the steps.

  • Photos fail to print after editing with clone stamp tool and layers

    After editing using the clone stamp tool and using layers the photos fail to print.  I even tried a simple crop edit and the photo failed to print.
    Photos print without editing.

    Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
    I tried printing from Organizer and editor and I have the image saved on my desktop
    I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
    I have left it sit overnight but it never produced a photo.
    The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

  • Could not use the clone stamp tool because the area to clone has not been defined

    Freshly installed Elements 10.  Can not use the option-mouse click to define an area for the clone stamp.  The error I get is:
    Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
    New Mac Mini.  Had the same problems in Elements 9 so I installed the 10 trial.  Is this a key binding error?  Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system. 
    I'm not a newbie and know how to use the clone tool.  I won't say I'm an expert so if it's something related to layers please throw out some ideas.

    This problem came back up.  I hadn't used PSE since last November and was frustrated to run into it again.  I don't think it's a layers issue afterall.
    I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use.  Regardless blue tooth is on for these devices.  Problem exists.  Turn bluetooth off on Air and the problem is gone.  It must be related to option key when bluetooth is on, I guess some different mapping.  Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
    So now where do I look for configs to check?

  • PSE* onVista- after install clone stamp tool fails

    A couple of uses after installing, the clone stamp tool bring up a message box COULD NOT USE THE CLONE STAMP TOOL BECAUSE OF A PROGRAM ERROR. Exactly the same error as occured with Version 6!    I uninstalled V6, cleared directory entries etc and did fresh install, still the same problem. Now I go to use latest version  in Version 8 and the same old. Any helpful suggestions? Thanks

    Hi, Can you please tell which file and format you are working upon, Because as per my knowledge goes, this does not happen and it works very well for all my images.

  • Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

    I've been using clone stamp tool option-click (healing brush  option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped  working suddenly on Monday.  Had just used it on Sunday.  So, I've tried  to isolate the problem.
    1. Went to Apple store and my keyboard and  mouse work fine on their inhouse systems running Photosochop CS5.   Problem still exists on home system.
    2. Adobe photoshop suggested I go back to Mac 10.6.3.  I did and problem still exits.
    3. Reset all presets in CS5.  Problem still exists.
    4.  Spent several hours with Adobe Photoshop tech on phone -- he couldn't  make it work remotely either using his keyboard.  Reloaded Photoshop  from scratch.  Problem still exists.
    Question:
    Could this be a hardware problem?  Graphic board problem? 
    Or is this a software problem aside from Mac OS and CS5?

    Hi Joan
    It sounds like you are not having fun at all : )
    >I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
    .....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
    ..... I wonder why the guru thought your system was gone if your new user account was working?
    If your new user account is working.... why not use it?  The system seems fine but something went screwy with the settings in your original account.
    hopefully someone else will chime in here with more insight before you start from scratch.

  • Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

    adobe photoshop elements 9 , i cannot get the circle  to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

    I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
    1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
    2. Under Painting Cursors, select Full Size Brush Tip
    3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
    4. Click ok.
    Now use the brush, and it should have a circle to use.
    P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

  • Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

    hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

    Good day!
    What kind of Layer is selected, is the Layer locked, …?
    Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
    Regards,
    Pfaffenbichler

  • PSE6 crashes when using Clone Stamp tool

    Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
    I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
    So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
    Does anyone else get this problem?
    Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
    Alan

    Hi Alan,
    is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

  • Problem using the clone stamp tool in cs6 64 bit

    I am trying to use the clone stamp tool, however each time I alt click  on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.

    If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
    Could you please post a screenshot with the pertinent Panels visible?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • A problem using clone stamp tool

    Hi guys,
    I use After Effects CC last version on a pc under windows 7 ultimate..
    This problem must be simple to solve but I just don't see how.
    I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
    I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
    I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
    But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
    Thanks in advance
    Claude

    OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
    Now you only have perspective issues to deal with.
    Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
    I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint  the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
    Here's a tutorial on how to apply tracking data to a clone stamp in AE:
    Removing an Object with Clone Stamp - After Effects Tutorial
    I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

  • In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

    I don't quite know how to use the clone stamp tool in the Photoshop 2014 version.  When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct.  How do you lock it down to keep it from moving?

    Hi Smoothery4501,
    The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
    Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
    Please refer to below blog for further info
    Clone Stamp Tool « Julieanne Kost's Blog
    Thanks

Maybe you are looking for