Clone stamp tool is TINY in Photoshop CC

Just downloaded Photoshop CC and when I go to use my clone stamp tool, even at size 50px, it looks like a size 1px.
Anyone else facing this issue? I'm using a brand new Macbook Pro.

Any chance you've got the Precise Cursor showing?
What happens if you hit your Caps Lock key?
-Noel

Similar Messages

Healing brush and clone stamp tools are not working - Photoshop Elements 11.

Anyone have suggestions on why the tools stop working?

Reset the tools. Look for this> and reset all tools
If that does not fix it, reset preferences to default. Go to Edit menu>Edit>Preferences>General and look for this
Close PSE and relaunch

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

I've been using clone stamp tool option-click (healing brush option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday. Had just used it on Sunday. So, I've tried to isolate the problem.
1. Went to Apple store and my keyboard and mouse work fine on their inhouse systems running Photosochop CS5. Problem still exists on home system.
2. Adobe photoshop suggested I go back to Mac 10.6.3. I did and problem still exits.
3. Reset all presets in CS5. Problem still exists.
4. Spent several hours with Adobe Photoshop tech on phone -- he couldn't make it work remotely either using his keyboard. Reloaded Photoshop from scratch. Problem still exists.
Question:
Could this be a hardware problem? Graphic board problem?
Or is this a software problem aside from Mac OS and CS5?

Hi Joan
It sounds like you are not having fun at all : )
>I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
.....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
..... I wonder why the guru thought your system was gone if your new user account was working?
If your new user account is working.... why not use it? The system seems fine but something went screwy with the settings in your original account.
hopefully someone else will chime in here with more insight before you start from scratch.

Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

adobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

Good day!
What kind of Layer is selected, is the Layer locked, …?
Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
Regards,
Pfaffenbichler

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

Photoshop Elements 6 Clone Stamp Tool with Overlay

Does anyone know how to use the clone stamp tool with the (new) overlay feature in PSE6 to clone whole objects? How do you show the overlay?
(Or, send me to a free tutorial on it.)
Thanks,
Stuart Klein

I suggest that you look on
http://www.photoshopelementsuser.com/learningcenter/
it has a tutorial on the v6 clone overlay

Photoshop CS4 Clone Stamp Tool behavior

I installed CS4 on a Dual Pentium Xeon 2.4ghz Compaq W8000 system with 3GB of RD 800mhz RAM and Windows XP Pro w/SP3 and all updates. The video card is a ATI Radion AGP-3855 w/512 GDDR3 RAM with latest drivers.
When using the clone stamp tool, after making a sourse selection there is a "trail" that follows the cursor to the destination (similar to using a mouse trail so you can tell where the cursor is on a notebook computer)
When the cursor slows down at the stamp destination the "trail" catches up and covers the destination with the sourse "patch" not allowing precise targeting. It is so cumbersome to use as to make the clone stamp tool almost unusable. The density of the "patch" is not affected by opacity settings.
Is this a new behaviour for this tool in CS4? And if so can it be turned off? Do I have a problem unique to my system?
Murray

Hi Anthony,
Good point and thanks for suggesting the clone source features. I can see that it has tremendous potential and will revisit it to see if it will benifit my work. My immediate problem was that overlay was on as a default and it was not obvious to me where to address it.
I have not used this forum before as I have a couple of gurus I lean on, but was really impressed by the immediate help I recieved here.
I am a wildlife-mammal-stock shooter and I have been using Quick Mask, with a feathered brush to make small to medium selections on a, sometimes, flipped version of the image I am working on, or from another one. Moving the selection to a separate transparent (background) layer and then bringing it into my image as a separate layer and aligning it by setting the opacity at 50% and then using rotation, opacity and layer masking to finish the work.I then use the clone stamp at a low (20-50%) opacity to do additional "painting" and to blend the QM object. This approach is cumbersome, but highly effective, however I may be able to use "your" clone source options for simpler or different tasks.
Thanks,
Murray

Problem with Clone Stamp Tool Transparency

Hi there, I am working in CS5 and lately when I have been drawing with the Clone stamp tool, the cloned content seems to be transparent instead of being a 100% opaque clone of the source. The tool is in normal mode but the result looks almost identical multiply mode. I am coming from CS3 and I have not run into this problem in the past. Any pointers would be greatly appreciated.

…and the align sample to current layer is checked on.
This implies that you need to understand what the settings actually do. You have a choice "current layer", "current and below" or "all layers". These have nothing to with Align, they are all about which layers are sampled.
"Aligned" is about where multiple clicks of the Clone Stamp sample from. How they relate to the source area that you sampled.
Opportunity to air a major complaint of mine - "Aligned" automatically keeps checking itself. Because some Grandpa (photoshop 6 or 7 can't remember) decided that Option double click should be a 'shortcut' to keep Aligned checked all the time. Because they always work with Aligned on I guess, they think everyone should. Unfortunately it means that if you are a fast and experienced user, you have to waste a fair amount of time each day locating a tiny checkbox, to turn the damn thing off again. And again. And again.

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

PSE6 crashes when using Clone Stamp tool

Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
Does anyone else get this problem?
Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
Alan

Hi Alan,
is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

Problem using the clone stamp tool in cs6 64 bit

I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.

If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
Could you please post a screenshot with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

A problem using clone stamp tool

Hi guys,
I use After Effects CC last version on a pc under windows 7 ultimate..
This problem must be simple to solve but I just don't see how.
I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
Thanks in advance
Claude

OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
Now you only have perspective issues to deal with.
Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
Here's a tutorial on how to apply tracking data to a clone stamp in AE:
Removing an Object with Clone Stamp - After Effects Tutorial
I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

Clone Stamp Tool does not work

This is a re-post of an old problem. Using PS CS4 Extended v. 11.0.2 in Win XP SP3.
The clone stamp tool does not alter my image. After selecting source region, cursor hovers over the target region and the preview looks like what one would expect. After clicking, however, the desired change does not occur.
Uninstalled PS and reinstalled. Clone stamp worked for a while, then quit working again.
Image seems to be OK, in that I can open it on my Laptop with CS3 on Win Vista, do my cloning, save and all works fine.
Any ideas appreciated. I may uninstall and reinstall again, but if I do, would like some ideas of what I should monitor as I go through my work process.

Jack wrote:
The second method worked. Many thanks.
To avoid this happening again, would appreciate any idea on what to look for in my Preferences.
Glad it fixed it.
When the preferences get corrupted it is not due to a wrong setting. One of the files has been damagrd. This is a known problem with computers not just Photoshop.
It can be caused by incorrect shut-downs, hard drive faults, or a dozen other reasons. Deleting the preferences just lets Photoshop generate a fresh set at factory default.
Make sure you check through to get your personal settings back and then save a copy.

Clone stamp tool is TINY in Photoshop CC

Similar Messages

Maybe you are looking for