Clone stamp tool issue on CS5

Working on pshop CS5 for the last days (transitioning from cs2) i noticed that the stamp tool in c5 is updated by having a "preview" capability inside its brush. Also noticed that this feature is making the stamp tool a little slower, or maybe more memory absorbent and looks to be slower and less smooth when working. Is there a way to shut the preview down and make it act like in cs2 where there is no preview in the stamp tool brush?

Thank you very much Chris for the right and fast reply

Similar Messages

Clone Stamp Tool and smudge tool issue

iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3; 2.7GHz Intel Core i5; AMD Radeon HD 6770M 512 MB.
Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
Intuos 4 tablet and pen.
Clone Stamp tool Setup:
Layer Adjustment parameter set to either This Layer and Below or All Layers.
All other parameters at default.
Using simple soft brush.
=====================================
The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

Welcome back gang.
Made a couple new discoveries while double checking.
Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
The problem replicates with the Adj layers clipped or not.
The key is any tweak in the Adj layers will cause the issue.
Any Adj layer tweak seems to get exaggerated when smudging on a layer.
For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
I do not know the threshold luminance pixel value but I would guess it is at 128/128.
Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
Tweaking the HSB Saturation slider to +12 will cause color posterization.
Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
Plus, it was probably designed to do so but I do not think it was to be so pronounced.
Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
When did PS add the Sample All Layers option to the Smudge tool?
Anybody else?
================================
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Mac OS 10.7.3
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2700 MHz
Built-in memory: 4096 MB
Free memory: 1738 MB
Memory available to Photoshop: 3384 MB
Memory used by Photoshop: 75 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.18.11
OpenCL Version: 1.1 (Dec 4 2011 16:53:18)
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915206
Video Card Memory: 500 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 930.7G, 700.7G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1642
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1640
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Required plug-ins:
(removed)
Optional and third party plug-ins:
   Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
Plug-ins that failed to load: NONE
Flash:
   onOne
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

I've been using clone stamp tool option-click (healing brush option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday. Had just used it on Sunday. So, I've tried to isolate the problem.
1. Went to Apple store and my keyboard and mouse work fine on their inhouse systems running Photosochop CS5. Problem still exists on home system.
2. Adobe photoshop suggested I go back to Mac 10.6.3. I did and problem still exits.
3. Reset all presets in CS5. Problem still exists.
4. Spent several hours with Adobe Photoshop tech on phone -- he couldn't make it work remotely either using his keyboard. Reloaded Photoshop from scratch. Problem still exists.
Question:
Could this be a hardware problem? Graphic board problem?
Or is this a software problem aside from Mac OS and CS5?

Hi Joan
It sounds like you are not having fun at all : )
>I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
.....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
..... I wonder why the guru thought your system was gone if your new user account was working?
If your new user account is working.... why not use it? The system seems fine but something went screwy with the settings in your original account.
hopefully someone else will chime in here with more insight before you start from scratch.

Clone stamp tool on a 3D object (CS5)

I'm getting very odd color corruption, using the clone stamp tool on a 3D object. I'm using it for one of the main aspects of PS 3D, painting out UV seams on an object. And I'm getting a very odd artifact: an entirely brown texture is, when sampled with the stamp tool, producing bright cyan and purple pixels on the outside of my feathered stamp brush. I never saw this before, but then I didn't end up using 3D painting in CS4 as much as I ordinarily would have, as my workload changed a lot.
But I'm using it now, and am seeing this annoying artifact. Does anyone else see this? Any known workarounds?

I also suddenly have this problem. I am using an ATI Firepro V5800, and have had no problems with any of the painting tools when using 3D in photoshop. Now it is a real problem! For now the projection onto a new layer and merging down is helping a bit, but when i merge down the edges between the original and merged layer change...you can see a clear shift in the colour between the two.
Very annoying! Perhaps a bug that's come with a new update? My graphics card drivers are up to date, the same driver that i was using when clone stamp used to work!

Clone stamp tool disables keyboard

I'm working on an iMac, OSX (10.7.4) with CS5.1. Ever since I uploaded my new Photoshop program months ago, it disables the alphanumeric keys on my key pad when I use the clone stamp tool. I have to restart my computer in order for my keyboard to work again.
I have talked to Adobe service multiple times, had the software replaced, had a service agent work with my machine from a distance, discussed the problem with Apple (they say it's an Adobe issue), paid a professional to resolve it, reinstalled the software multiple times and ways, worked in safe mode, worked as another user, but the problem persists.
I am a full-time graphic designer with my own business and usually have Illustrator, InDesign and Photoshop all open at the same time, so when I have to restart it is a major problem that I encounter multiple times during my work day.
Is there anyone that can help? I wish I had never purchased the upgrade and now fear CS6. What can I do?

The application can't disable the keyboard for other apps, or after the app has exited.
That can only happen at an OS level.
Also, I just tried using the clone stamp too, and my number key pad is still working just fine.
You probably need to talk to Apple again and ask what inside the OS could do that, even if it is triggered by an application (but it sounds like an OS or driver level bug).

A problem using clone stamp tool

Hi guys,
I use After Effects CC last version on a pc under windows 7 ultimate..
This problem must be simple to solve but I just don't see how.
I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
Thanks in advance
Claude

OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
Now you only have perspective issues to deal with.
Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
Here's a tutorial on how to apply tracking data to a clone stamp in AE:
Removing an Object with Clone Stamp - After Effects Tutorial
I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

Clone Stamp Tool Freezes

The clone stamp tool causes After Effects to freeze. This wasn't happening before I ugraged to CS5. After a few strokes, the program just freezes out of nowhere. I am working with HD, ProRes 422 files, on a Mac 2.4 dual core laptop. 4G Ram. But as I said, I had no problem prior to upgrading to CS5, and I had worked with the stamp tool many times with the same type of files, on the same computer. There's another post for the same problem, however that person was working in CS4, and it doesn't look like a solution was found. Does anyone know why this is happening and what the solution is? Thanks.

Have you installed the 10.0.1 update?

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Problem with Clone Stamp Tool Transparency

Hi there, I am working in CS5 and lately when I have been drawing with the Clone stamp tool, the cloned content seems to be transparent instead of being a 100% opaque clone of the source. The tool is in normal mode but the result looks almost identical multiply mode. I am coming from CS3 and I have not run into this problem in the past. Any pointers would be greatly appreciated.

…and the align sample to current layer is checked on.
This implies that you need to understand what the settings actually do. You have a choice "current layer", "current and below" or "all layers". These have nothing to with Align, they are all about which layers are sampled.
"Aligned" is about where multiple clicks of the Clone Stamp sample from. How they relate to the source area that you sampled.
Opportunity to air a major complaint of mine - "Aligned" automatically keeps checking itself. Because some Grandpa (photoshop 6 or 7 can't remember) decided that Option double click should be a 'shortcut' to keep Aligned checked all the time. Because they always work with Aligned on I guess, they think everyone should. Unfortunately it means that if you are a fast and experienced user, you have to waste a fair amount of time each day locating a tiny checkbox, to turn the damn thing off again. And again. And again.

Clone stamp tool blurs frame edge

I'm a newbie on After Effects, so please bear with me.
I'm trying to remove an electric wire that extends through frame, bisecting the bottom of frame and right edge. I'm using the clone stamp tool with "0" hardness and a 150pt brush, and the results are perfect. However, I have a problem I can't resolve. Because the wire extends "off frame", I start below frame with my brush and drag across the frame and off the right edge. The bottom is clean - but the right edge is "blurred" and no longer a straight edge.
Upon updating to Premiere Pro, the new comp shares that crooked edge.
How can I fully remove the wire and keep my nice straight frame edge?
Thank you.

After Effects CC updated. Here are screen shots. The shot is a body falling through frame. The camera pans, and in doing so reveals the wire. I had to "paint" the wire out frame by frame. This is the last frame (the body already gone). If you look on the right frame edge, above the midpoint, you can see where the frame "bulges" and "blurs". When the shot plays, as the cloned footage "travels" through frame, the "bulge" moves from bottom up along the edge. It's very noticeable. Oddly, there isn't the same issue with the bottom of frame - although I dragged with the clone stamp tool through that edge as well:
Before
After

Clone stamp tool suddenly looks bitmapped around the edges

I'm using the clone stamp tool, as well as the spot healing brush, and it has suddenly begun to look "bitmapped" around the edges. I am using the clone stamp at the halfway mark between hard and soft, but instead of a smooth blend at the edges of the circle, it looks bitmapped. The tool still works fine, it's just very distracting. I've tried restarting my computer, I've double-checked my tool preferences, but it's still bitmapped looking. ?????

Update your graphics driver and/or adjust the settings or turn off OpenGL in the preferences. Sounds like you see issues with transparency belnding for the clone stamp overlay preview. For anything beyond that blindfold advise we would need some real system info and otehr details like actually knowing what version of PS you use. you have not provided any of that.
Mylenium

Clone stamp tool is TINY in Photoshop CC

Just downloaded Photoshop CC and when I go to use my clone stamp tool, even at size 50px, it looks like a size 1px.
Anyone else facing this issue? I'm using a brand new Macbook Pro.

Any chance you've got the Precise Cursor showing?
What happens if you hit your Caps Lock key?
-Noel

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

adobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

Clone stamp tool issue on CS5

Similar Messages

Maybe you are looking for