Clone Stamp Tool not pasting my selection - PSE 10

When brushing the cloned selection into my image, a crosshair moves around the screen, and the tool pastes whatever's under the crosshair, not my original selection.
I unchecked the "Aligned" box, but apparently this isn't the solution. Any help is appreciated.

I see what's happening. I was trying paint the target area, holding down the mouse. This automatically enables Aligned mode.
Thanks.
Joe

Similar Messages

Clone Stamp Tool is messing up in PSE 10.0

Whenever I use the clone stamp tool, it acts weird and keeps messing up my photos. Instead of correcting the photo, it puts a large streak or spot in a different area of my photo. Is there a bug in the software?

Hi,
I think, Can you verify that you are working on the correct layers?
If you have more than one layer in the layers panel of your image, Make sure, you select " Sample All Layers" option from the options bar on the top.
Also, make sure you have selected the correct layer(mostly the top layer works) while cloning the areas.
So, make sure you follow this:
while doing "Alt+Left Click" to sample area, make sure you have "Sample All Layers" selected
While painting the sampled area to another position, make sure you are on the top layer or the layer you want to clone to.

Clone Stamp Tool not cloning transparency correctly

My clone stamp tool is not cloning transparency correctly.
I have looked at all opacity, flow, and blending setings.
Basically, what I remember from before this problem started, is that cloning a transparent edge, or an area with some degree of transparency, and the transparency information would transfer pixel for pixel.
Now it appears that the color cloning is working correctly but the transparency information is cloning as additive.
For example, if I have a solid color square with no transparency, surrounded by tranparent area and I clone from the square into the tranparent area, it clones corectly. If I try to clone FROM the tranparent area, into the square, nothing happens. The zero opacity (transparent) information is added to the 100% opacity square and the result is no change. I would expect to create a brush shaped line of 100% transparency since my cloning stamp is set to 100% opacity.
If there is an area that is50% transparent. (Like if it had been erased at 50% opacity), then when I clone one part of the 50% transparent area onto another, instead of staying the same the tranparency goes to 100%.
I am trying to use the cloning stamp tool to modify a .png logo that contains many areas of varying transparency, and so this problem is making the editing slow going if not impossible.
I do not know how to fix this or if I inadvertantly checked/engaged some sort of setting.
Any help is appreciated.

You may be correct. I tried it on an older version of Photoshop with the same effect.
I am not sure why I thought transparency would clone rather than add the transparency.
I think it would be more effective if you could clone the transparency though, or at least choose. For example, what if I I want to clone an area with less than 100% opacity on to another area with 100% opacity, or if I want to clone an uneven edge that is opaque on one side and transparent on the other, and I want to move it into the opaque area a little further.
It seems I have done this many times, but I may just be tired and not remembering correctly.
At any rate, thanks for the quick reply.

PSE6 crashes when using Clone Stamp tool

Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
Does anyone else get this problem?
Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
Alan

Hi Alan,
is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

Clone Stamp Tool does not work

This is a re-post of an old problem. Using PS CS4 Extended v. 11.0.2 in Win XP SP3.
The clone stamp tool does not alter my image. After selecting source region, cursor hovers over the target region and the preview looks like what one would expect. After clicking, however, the desired change does not occur.
Uninstalled PS and reinstalled. Clone stamp worked for a while, then quit working again.
Image seems to be OK, in that I can open it on my Laptop with CS3 on Win Vista, do my cloning, save and all works fine.
Any ideas appreciated. I may uninstall and reinstall again, but if I do, would like some ideas of what I should monitor as I go through my work process.

Jack wrote:
The second method worked. Many thanks.
To avoid this happening again, would appreciate any idea on what to look for in my Preferences.
Glad it fixed it.
When the preferences get corrupted it is not due to a wrong setting. One of the files has been damagrd. This is a known problem with computers not just Photoshop.
It can be caused by incorrect shut-downs, hard drive faults, or a dozen other reasons. Deleting the preferences just lets Photoshop generate a fresh set at factory default.
Make sure you check through to get your personal settings back and then save a copy.

Program error when trying to use the clone stamp tool - PSE 8

When trying to use the CLONE STAMP TOOL, getting the following: "Could not use the clone stamp tool because of a program error".
Runnng PSE 8 on Windows XP/SP3. I purchased the key to have a full version, versus the 'trial version'. I also have Photo Essentials 3 installed and have used it without any problems.
Any suggestions?

I figured it out - it was ID 10 T error...ugh.
Was following along in a book and blindly did what it said....was forgetting to hit the 'alt' key when first defining the area to clone....
However, it was kind of a confusing error message - something like "clone area not defined" would be more of a help.
thanks.

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Clone Stamp Tool and Healing Brush not working - why?

As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined". Well, this is not the case since I did define it with command Alt + left mouse click.
Background:
Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Clone Stamp Tool in CS6 Will Not Work on Tiff Files

All of a sudden the Clone Stamp Tool does not work when working on a tif file. Yes I get the Circle with + sign when I press the ALT Key but tool will not clone.

Hi Trevor!
I found out that it affects all file extensions. Files were created after adjustments in Bridge. Layer is not locked. Opacity is at 46. Now as I reviewed your answer, I was looking at a FAQ about the same thing. Truthfully I did not know that you could reset tools.
I found out how to reset the CSTool and voila!!! Now works fine.
Thanks for the advice...
Dan

Stamp tool not generating the same colour as the sample area I select.

Heya, I am having an issue with the stamp tool not generating the same colour as the sample area I select. I have tried reducing the flow rate but my understanding was it should be an exact copy of the ample area. I have only had this issue for the last two versions of photoshop.
Cheers, Andy

function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
This occurs when you use the quick mask to create a selection. Did you?
miss_marple

PSE* onVista- after install clone stamp tool fails

A couple of uses after installing, the clone stamp tool bring up a message box COULD NOT USE THE CLONE STAMP TOOL BECAUSE OF A PROGRAM ERROR. Exactly the same error as occured with Version 6! I uninstalled V6, cleared directory entries etc and did fresh install, still the same problem. Now I go to use latest version in Version 8 and the same old. Any helpful suggestions? Thanks

Hi, Can you please tell which file and format you are working upon, Because as per my knowledge goes, this does not happen and it works very well for all my images.

After Effects clone stamp tool cursor not appearing. It is not the caps lock. This is my first time using it.

Any ideas?

Instructions for using the Clone Stamp tool are here:
http://helpx.adobe.com/after-effects/using/paint-tools-brush-clone-stamp.html#clone_stamp_ tool

Clone Stamp Tool not pasting my selection - PSE 10

Similar Messages

Maybe you are looking for