Clone Stand-Alone media bootable thumbdrive

Hello,
SCCM 2012 R2 have created a stand-alone media bootable thumbdrive and would like to clone it. Is there a way?
Thanks!

Not sure on the quantity of thumb drives they're seeking there is about 10 sites with about 30 systems per site.
Currently the task sequence takes over an hour to complete the Wizard build on the thumb drive.
I see a couple utilities that claim to do the whole bit copy. But who knows if issues arises later using one of these solutions?
Thanks!

Similar Messages

Cannot install Applcations in Stand-Alone Media image

Since updating from SCCM 2012 R2 to CU3 i have not been able to get our Stand-Alone media to work.
The Task Sequence is running fine until it gets to the install of the SCCM client. The installation of the client runs and then it restarts and then it runs it again, but when the task is done it goes to the login screen of Windows and ignores all the steps
which comes after the client install.
I have put in some alerts in order to find out exactly where is fails and the alert which runs prior to the client install is shown but the alert immediately after the install is never run.
I am beginning to supect that the client install is failling.
I have updated the package on the DP wihthout success.
TS:
SMSTS.LOG
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="08:48:39.816+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="08:48:39.831+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1462">
<![LOG[Enabling local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1219">
<![LOG[Account was already enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1228">
<![LOG[Re-assign all drive letters...]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1941">
<![LOG[The drive information which has no drive letter can not be found. No need to re-assign driver letters.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1951">
<![LOG[Installing SMS client]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1474">
<![LOG[Clearing existing client configuration.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:291">
<![LOG[Cleaning existing client certificates from SMS certificate store]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="installclient.cpp:138">
<![LOG[The client identity was not found in the environment. A new identity will be generated for this client.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:363">
<![LOG[Using CRL: true]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:952">
<![LOG[Unable to read SMS client cert from environment. Not restoring SMS client cert.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="installclient.cpp:962">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 2180 ]==========]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:330">
<![LOG[Registering COM classes]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:187">
<![LOG[sbModulePath = C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="tsprogressuiclass.cpp:625">
<![LOG[Shutdown complete.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully registered TS Progress UI.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2279">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\PRI00158\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\PRI00158 /config:MobileClient.TCF /status:564]LOG]!><time="08:48:39.987+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[Launching command shell.]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:202">
<![LOG[executing command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:63">
<![LOG[executed command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:80">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Start to cleanup TS policy]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3055">
<![LOG[End TS policy cleanup]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3103">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="utils.cpp:4522">
<![LOG[Saving the new active request handle for the task sequence: {03EB3804-5F8D-4AA4-9C9F-5FE7E57A4FB0}]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4535">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="08:50:19.547+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4597">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="08:50:20.576+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 512 ]==========]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:330">
<![LOG[Unregistering COM classes]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:204">
<![LOG[Shutdown complete.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2320">
<![LOG[Moving logs to SMS client directory]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1495">
I hope someone out there can point me in the right direction

Hi Martin
Could you try adding a delay in the task sequence after the reboot, I have experienced a number of problems with SCCM 2012 R2 and reboots in task sequences. Microsoft Premier Support recommend creating a 5 minute delay. A shorter one may resolve the problem,
I would recommend trying this first.
The other thing to check is how are you preparing you boot media are you using a usb, if so is it formatted to NTFS or FAT32, I would always recommedn NTFS

Stand-alone media and domain joining

Hello,
please help to identify a problem, I have used stand-alone media to migrate one computer from XP to 7, all good except joining to domain, computers saved its name but instead of domain computer is in workgroup named as domain netbios name, I have checked
smsts log, I did not find any "djoin" records, what can be a reason? This TS works good without stand-alone media, also in the TS a I have checked connection to domain with specified account for joining to domain.
SCCM 2012 R2.

I have found a lot of similar entries:
05/07/2014 17:47:12:916 NetpValidateName: name 'domain.com' is valid for type 3
05/07/2014 17:47:12:916 NetUseAdd to \\ADC01.domain.com\IPC$ returned 1909
05/07/2014 17:47:12:916 NetpJoinDomain: status of connecting to dc '\\ADC01.domain.com': 0x775
05/07/2014 17:47:12:916 NetpJoinDomainOnDs: Function exits with status of: 0x775
05/07/2014 17:47:12:916 NetpDoDomainJoin: status: 0x775
ad account which is used for joining is not locked and tested for accessing to OU.

Stand-alone media, how to domain join & set computername?

Hi
I've created a stand-alone media. The computer is connected to the network.
After the setup, the computer (it is already in a collection in sccm with the correct mac address) won't renamed correctly and won't join in the domain.
What do I need to have the machine staged via stand-alone media have a correct host name and joined in the domain?
Thx for the reply.

Hi,
Please take a look at this thread:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/b435dc26-bdc2-4b3d-a305-2e105eaf9a57

Optional applications selected via UDI interface and stand alone media

I'm running SCCM 2012 sp1 with MDT integration. I'm using a UDI from MDT to set some basic machine informatoin for imaging (select the OU in the domain, etc). I also have some optional apps that a tech can select from the UDI to install during
the TS.
All is working great with network based installations. However, I have a need for some installations using stand alone media. Is there a way to create stand alone media that will include those optional apps in the MDT UDI so that those apps can
install during the TS? I don't think there is, but there are more brilliant minds than mine out there so I thought I would ask. Maybe there's a way to generate stand alone media via a PS script or something, and have it include the additional
packages so they are on the media and can be called via the TS when it runs.
Thanks!

The root cause of this issue has nothing to do with UDI really, it is just the fact that installing applications using dynamic base variables is not supported in standalone media. As you say everything has to be directly referenced by the task sequence
for it to work.
We had this same issue a couple of years ago in ConfigMgr 2007 and ended up building our own standalone media wizard using the SDK. Sounds like a lot of work I know, but for us it was well worth it. We have just migrated it to ConfigMgr
2012 and updated it to support the app model.
The reason it made sense for us to invest the time in it was because we are a fairly large enterprise (160,000 seats) with a single task sequence used worldwide. The Windows 7 configuration requirements (not just in terms of app deployment) vary
dramatically from one country to another, but using variables to control deployment we have managed to retain a single TS but let the child site admins have some flexibility. As we have many small branches/agencies with no ConfigMgr infrastructure we
had to come up with a solution which retained and reused the single TS design but also worked offline. Standalone media is used to deploy Windows 7 to thousands of users. Getting the local apps to install wasn't our only issue, the size
of the media was also a problem due to the number of dependencies required to support deployment in every country (drivers, language packs, x86+x64 etc.).
So our standalone media wizard does this:
Reads in the collection variables (used to customise deployment, deploy apps etc.)
Prompts the user for various options like x86/x64, HW types etc.
Creates a copy of the global TS, the wizard then modifies the copy so that a custom TS is created dynamically just for the media.
It disables any unwanted actions in the local TS to remove drivers, x86/x64, language packs etc.
Adds install application actions for each of the apps specified in the dynamic app install variables.
Prompts user for normal standalone media options like ISO, USB, Password, DPs etc.
Creates media based on local/temporary TS.
Deletes the local/temporary TS when complete.
This solves the issue for zero touch deployment but does it work with UDI? Well the answer is yes and no. We do use UDI (but again built with the MDT UDI SDK). Out of the box, the answer is no. UDI brings a slightly different
issue in that not only are the apps not referenced by the TS (so they are not in the media) but you are also then trying to dynamically change which apps are installed during deployment. So even if the apps are directly referenced and in the media,
you still have to develop a way of controlling which TS app install actions run based on the user selection.
If you are willing to spend some time with the SDK then it can be done, you just may not find this worthwhile depending on the scale of your environment.
Mark.

Windows Media Player ActiveX not playing image, but WMP stand alone application does. Why?

I use my Windows Media Player v11 with additional codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works fine in the stand alone application, but when I use the ActiveX control in NI, it does not use the codec and I get only the sound... no image. I thought the ActiveX was simply an interface to the same core application used by NI and the stand alone media player. And if it is the same core, it should use the same codec. What am I missing?
Solved!
Go to Solution.

I have a tip for you. If you download Quicktime 7(QT), you may select the QT activex player(see picture). It plays mp4 and looks better. And QT is free so it should not any problem. Try and see if it do you any good
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
sample.PNG ‏114 KB

11g HTTP Stand Alone Server Media

Does anyone know where the 11g HTTP Stand Alone Server media is located for download. It used to come with the companion CD in 10g, but this is the statement in the Oracle Documentation - "Oracle HTTP Server: Starting with Oracle Database 11g, Oracle HTTP Server is available on a separate media shipped with Oracle Database. In the previous releases, this product was available as a Companion CD component.".
Can anyone provide a link to the download? As its not with the 11g database download....

But there is still a copanion CD (it is called examples now).
http://www.oracle.com/technology/software/products/database/oracle11g/111060_linx8664soft.html
Dim

Stand alone USB media

I'm attempting to create some stand alone USB media to deploy a full image and TS apps offline. The USB's create successfully, but all of the application package folders are empty and when a system is deployed, it only has what was captured in
the WIM file and not the TS applications. The folders containing the drivers have all the driver files. Am I missing something?
Thanks

So it seems that the USB's must be able to contact the DP to install the TS apps. How do you create a USB that can deploy the complete TS offline?

Stand alone installer for flash player

Is it still possible to download a stand-alone installer for Flash Player (or any Adobe product)?
I really, really, really, really have NO interstes in any download manager. All I want is an installer I can just download. There used to be an ftp site that had up to date software that could simply and easily be downloaded, but I couldn't find any current software on that site. Where should I be looking?

You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X

BlackBerry Link and syncing Contacts, Calendar and Tasks with stand-alone desktop installation of Outlook 2010?

I have used Blackberries in business since the beginning. Fantastic products!
Sadly after spending the better part of Feb 6th transitioning from Torch to Z10 I have had to abandon the effort and request an RMA number to return the Z10.
Here is why:
"Link" appears to be focussed on syncing documents and media like content such as music and movies but does not, from what I can tell, sync Outlook Contacts, Calendar entries or Tasks. I have never bothered putting music or movies on a BB... never had the time to fuss with such... however, I use, edit and sync my Contacts, Calendar and Tasks between my Torch and my desktop PC every day... as in EVERY day!
From a review of postings on various forums there does not appear to be a solution in the works to this problem and the trend appears to be to use a Cloud based email or service to host such "PIM" information and then sync the handheld to the Cloud repository. This method MAY be suitable for some forms of info but it is not suitable to post such personal info on the cloud... it needs to stay on the desktop and in the handheld device, both of which are password protected and looked after carefully.
This is an odd situation, BB (RIM) cut their teeth on pages, emails, BBM and great cell calls, mainly in a business environment. Many small business users live and die on their BB. They do not run Exchange Server... they run Outlook stand alone on a desktop. To remove this functionality from the Z10 (BB10 overall perhaps) seems at best to be a serious oversight.
I wish BB the best with the Z10 and hope to see it do well. For me, I had to make a choice between the efficiency and effectiveness of syncing Outlook Contacts, Calendar and Tasks with the Torch, or hand feeding and maintaining thousands of constantly changing entries into what is undoubtedly a more powerful and wonderful looking Z10. Efficiency and effectiveness won over brawn and beauty. The Torch is back on line... It's a tool... a really great tool! Tomorrow it will process a hundred emails, numerous SMS messages, a few BBM's, keep me on time and feed me a bunch of useful phone numbers and addresses as it has for a couple of years now. It will also spend an hour or so teathered to my laptop at a remote location where there is cell coverage but no internet. It will NOT display any movies, tweats, twits, or facebook stuff that I won't have time to look at anyway. The fast, powerful, shiny Z10 is heading in an RMA bag back to Telus.
I have a sort of sick feeling in my gut and hope to be able to sync again in the future!

my feelings and my situation excatly

Stand alone installer for Yosemite

Is there a stand alone installer for Yosemite? I have extremely slow internet access and the download fails repeatedly from Software Update.
I would like to download at work and bring to my computer as taking my computer to work is not an option.
Thanks
...lane

You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X

Stuttering in stand alone dvd players

I can"t understand why when i burn dvd's they tend to stutter in stand alone dvd players but plays jus fine in my mac dvd player. Can anyone tell me why this happens. Is it the bit rate or the the dvd media. I can't figure it out.

Is the shuttering constant ? If not it could be a support problem.
If it is constant (strobe-like), however then I suspect it's an interlace field order thing.
In this case the ordering of the interlace fields is wrong. But either the DVD player on Mac accounts for a different order than the standard one, or it the process of converting the interlaced signal into progressive (that's how computer displays are) automatically removes the concept of field ordering.
baubau
Davide

MP3 CDs from iTunes on stand-alone DVD players

I was reading a couple of threads in this forum on that topic and here are my observations:
Until now I have been burning MP3 CDs in iTunes only as a backup, not for actual listening.
Recently we have purchased a rather cheap stand-alone Grundig DVD player for watching movies, it is also MP3 CD-R/DVD-R compatible. It will play any CD-R or DVD-R with MP3 files on it that has been burned in the standard ISO 9660 or Mac-Hybrid format, either on a PC or using Toast.
The player will not recognize any MP3 CD burned using iTunes 4.x or 6.x, either on an iBook G3 or a Powerbook G4. This is not due to bad or cheap media, all of those CDs show up in iTunes and play correctly. I'm using Sony CD-Rs and I haven't had a single problem with hundreds of them in the past few years. I use them mostly for data backup or for sending client's files to a print office.
If I copy the data from an iTunes MP3 CD to Toast and burn them as an MP3 CD using Toast, the CD will play fine in the DVD player.
So, my summary:
There's definitely something wrong with the way iTunes creates an MP3 CD.
Personally, I don't care much though. If I ever "desperately" needed an MP3 CD to play in that DVD player, a copy of my backup CDs using Toast is done quickly and costs near to nothing.
PowerBook G4/1.67/15 Mac OS X (10.3.9)

I found this one, and it's actually super simple and works great;
http://burn-osx.sourceforge.net/Pages/English/home.html
thanks for your help
its called BURN!

Separating all.css from stand-alone mobile site

I have come to the conclusion that I need to create a stand-alone mobile site for a client's ecommerce site. Should I copy and paste my css code from the desktop version "all.css" into the phone.css so as to keep them separate? The "Main template_phone.dwt" uses "all.css" and "phone.css" but I don't want to change any of the css for my desktop version. Thank you!

That really depends on the situation and what if any CSS you are reusing.
There are several ways to do what you need including, seperate CSS files, Media Queries (Dreamweaver), the BC built in mobile template system, if doing it in Muse they now have mobile capability now as well.
So we would really need more information to advise what would be the best solution for you.

Move P6 R8.1 Stand Alone to new PC?

We have a stand alone version of P6 with a local Oracle Express database installed on a single PC. We need to transfer this to a new computer. I have installed PC on the new machine but am having difficulty understanding how to transfer the data across.
I am totally new to both Primavera and Oracle so any help that can be given would be gratefully received.
Thanks

Hello,
You have different options to tranfer your data.
1)Export your projects in XER or XML files and import in your new PC . (won't export obs, layout, ect)
2)Backup your database with exp method and import in your new computer
3)Migrate all your database information from old computer to your new computer with the migrate.bat tool (in the media folder)
Best Regards!

Clone Stand-Alone media bootable thumbdrive

Similar Messages

Maybe you are looking for