Clone system, will it work for both 17" & 20" rev a's

If I clone my 20" iMac G5 rev A to my external fire wire HD, in a total disaster can I use this system clone in my 17" iMac G5 rev A? can't remember is they came with different system disk, or if they need different system disks. Hoping one backup of tiger can be used for both.

I do this routinely when I'm upgrading from one mac to another. As long as you have the most current OS then it will work on the other mac also. I use carbon copy cloner to do my cloning. Haven't had a dead mac yet. I even cloned from a powerbook to a powermac with no problems. I just had to go into one the system directories to remove the battery menu item afterwards. It wasn't doing much good on my powermac G5
Glor
ps if I'm going to a newly released computer. I'll first do the clone using target disk mode, then run the new computers system install to make sure that any new pieces are present.

Similar Messages

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

HT201328 I need to use my phone in the UK and Kenya; if it's unlocked will it work in both countries?

I need to use my phone in both the UK and Kenya; if I purchase a UK iPhone 4 with T-Mobile and I get it unlocked will it work in both countries when I change the SIM card each time I visit the countries?

If you can get an unlocked iPhone that is on the GSM system then all that is needed is to use a valid sim for a carrier in either country. Be careful where you buy the unlocked iPhone, there are dealers selling "sim free" iPhones that are only unlocked until the first sim card is inserted. Then they lock to that carrier and you cannot use them with any other network.

HT201407 If I buy an iphone 5c will it work for NET 10 and Straight Talk providers?

I am looking to buy either an iphone 5s or iphone 5c for my daughter this Christmas. She uses Straight Talk...I use NET 10. If I buy either one of these iphones from Apple, will it work with both carriers?
Thanks,
Heather

You need to talk with Straight Talk and see if they will accept a carry in Verizon iPhone.

How to show one prompt that works for both Graph and Table views?

Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
Too much data to use the slider because it will not graph.
Page prompt does not allow user to switch dates easily.
Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
Saw something about Master Detail linking, but does not appear to work with graph prompts.
How would the analysis be configured to show one prompt that works for both the Table and the Graph?
One prompt would change both the table and the graph.

Master Detail Linking almost works.
Table view can show all the results without error.
Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
Is there a way to set the initial Master Detail Linking value to the top sorted value?

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

I am having difficulties in maintaining a facetime connection through my ipad. It will generally work for 20 seconds or so and then the frame freezes. It is difficult to follow our 2 year grandson. Any fixes?

I am having difficuties in maintaining a Facetime connection through my ipad 2. It will generally work for 20 seconds or so, and then the frame freezes. Sometimes we have audio with a freeze frame picture. It is difficult to maintain the attention of a 2 year grandson anyway, but the the lost connections make it impossible. Any fixes?

This is a connection problem with wifi. Either your wifi is failing, or your internet service is not fast enough for video feed.

Adobe CS4 will it work on BOTH Windows XP and Windows 8.1 ?

@Adobe CS4 will it work on BOTH Windows XP and Windows 8.1 ?
will adobe CS4 work on Both Windoes XP and Windows 8.1 ?

It should.
Mylenium

I have iPhone 4 runs on iOS 7 and now iPad mini 2 run on iOS 8 but once I install iTunes 12 64 but windows den will it work for iphone4

I have iPhone 4 runs on iOS 7 and now iPad mini 2 run on iOS 8 but once I install iTunes 12 64 but windows den will it work for iphone4 ?

Hi bhaity2014,
Welcome to the Apple Support Communities!
I understand that you are concerned that your iPhone 4 running iOS 7 may not be recognized in iTunes 12. Your iPhone 4 running iOS 7 should have no issues being recognized or syncing with iTunes 12. If it is not recognized in iTunes on your Windows computer, please use the attached article for troubleshooting assistance.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Best regards,
Joe

Usb will only work for powered devices

I am having an issue to where my USB ports will only work for devices that have power supplied to them, ie an external hard drive that has a power adapter and not for devices that do not have power supplied to them. I was seeing if anyone could help me resolve this issue?
I have a Macbook Pro 15 inch Late 2011 model w/ the 2.2 Ghz i7 Processor.

Eustace Mendis wrote:
This is simply a case of the USB ports not being able to provide enough power. I do not know if there is a way to change this.
This is highly unlikely, the USB specification (to which Apple adhere) requires a constant 1 amp at 5 volts, a peak of 2 amps for a brief period is available. All reputable manufacturers adhere to this spec, it is more likely a fault condition.
To the OP, reset the Pram http://support.apple.com/kb/ht1379
and reset the SMC http://support.apple.com/kb/HT3964
Reboot the machine and try again.
If this brings no relief you should follow Oglethorpes advice and take it to Apple for repair.

Bind, will it work for local dev dns? [solved]

im trying to get bind to work, and trying to get my stack overflow points up lately too,
will bind work for what i need it for?
i have a lamp stack arch box here, and im putting bind on it, hopefully to solve an issue. briefly, i want this lamp stack to also be my internal network's dns server, for a specific purpose. that purpose is so that on my windows dev machine, i dont have to fuck with my etc/hosts file any more, and so that i can finally designate this lamp stack server with a real domain name structure (e.g. on httpd.conf ServeName=finally.domain.pvt, as opposed to ServerName=192.168.1.10:80, and so that i can simplify my vhosts file too, by having a domain standard finally. so i aim to replace etc/hosts entries (e.g. shitter.domain.pvt, pisser.domain.pvt, pooper.domain.pvt, ideally into *.domain.pvt on zone file) with A record entries so they are propegated to all pcs on the network. is this possible?
see this for all the details.
http://stackoverflow.com/questions/2987 … -on-server
Last edited by wolfdogg (2015-04-27 08:00:41)

solved
one problem was being shed light from
journalctl -xn
, i needed to do what was mentioned here https://bbs.archlinux.org/viewtopic.php … 4#p1391324 to solve those issues. the file, and dir were missing.
the rest of teh problems were worked out with a better understanding of the zone file, and with finally getting logging working ( see named.conf for that)
if somebody wants to add this to the wiki, and or make a wiki called local dns server, or something, feel free, otherwise, i will end up getting this stuff in there in due time.
// vim:set ts=4 sw=4 et:
acl "trusted" {
192.168.1.0/24;
127.0.0.0/8;
options {
directory "/var/named";
pid-file "/run/named/named.pid";
listen-on { trusted; };
listen-on-v6 { any; };
allow-query { trusted; };
allow-transfer { none; };
allow-update { none; };
forwarders {
8.8.4.4;
8.8.8.8;
query-source address * port 53;
version none;
hostname none;
server-id none;
logging {
channel default_file {
file "/var/log/named/default.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel general_file {
file "/var/log/named/general.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel database_file {
file "/var/log/named/database.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel security_file {
file "/var/log/named/security.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel config_file {
file "/var/log/named/config.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel resolver_file {
file "/var/log/named/resolver.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel xfer-in_file {
file "/var/log/named/xfer-in.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel xfer-out_file {
file "/var/log/named/xfer-out.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel notify_file {
file "/var/log/named/notify.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel client_file {
file "/var/log/named/client.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel unmatched_file {
file "/var/log/named/unmatched.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel queries_file {
file "/var/log/named/queries.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel network_file {
file "/var/log/named/network.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel update_file {
file "/var/log/named/update.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel dispatch_file {
file "/var/log/named/dispatch.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel dnssec_file {
file "/var/log/named/dnssec.log" versions 3 size 5m;
severity dynamic;
print-time yes;
channel lame-servers_file {
file "/var/log/named/lame-servers.log" versions 3 size 5m;
severity dynamic;
print-time yes;
category default { default_file; };
category general { general_file; };
category database { database_file; };
category security { security_file; };
category config { config_file; };
category resolver { resolver_file; };
category xfer-in { xfer-in_file; };
category xfer-out { xfer-out_file; };
category notify { notify_file; };
category client { client_file; };
category unmatched { unmatched_file; };
category queries { queries_file; };
category network { network_file; };
category update { update_file; };
category dispatch { dispatch_file; };
category dnssec { dnssec_file; };
category lame-servers { lame-servers_file; };
zone "ld.pvt" IN {
type master;
file "ld.pvt.zone";
$TTL 7200
@ 1D IN SOA ns1.ld.pvt. root.ld.pvt. (
2007011622 ; Serial
3H ; Refresh
15M ; Retry
1W ; Expire - 1 week
1D ) ; Minimum
IN NS ns1.ld.pvt.
ns1.ld.pvt. IN A 192.168.1.10
*.ld.pvt. IN CNAME ns1.ld.pvt.
redtail.ld.pvt. IN A 192.168.1.99

I got a replacment iphone 4 but it will not work for me please help??

i got a replacment iphone 4 but it will not work for me it has been charging for nearly 4 hours now but the screen still has the battery in the red and also will not connect to itunes is there something im doing wrong??

You'll have to get it serviced or replaced again, contact Apple, usually a replaced device is under warranty for 90 days as well.
Apple - Support - Service Answer Center

Will iPSP work for video conversion?

I'm sure this was covered before, however I'm getting tired and can't find it....
Will iPSP work for converting video to an iPod "friendly" format that will sync and play on the iPod?
If so, what settings do I need, etc.
Thanks.

Indeed possible; if you are using AIR 2.5 for android. Have a look at one such example here: http://www.flashmobileblog.com/2010/07/17/p2p-video-calls-on-android/

Reset password will not work for apple store

Reset password will not work for apple store?

Welcome to the Apple Community.
Where have you reset your password.

My apple id will not work for my icloud account

my apple id will not work for my icloud account I am running windows 7 I have reinstalled ICloud for PC several times but do not know where to set up an icloud account

If you are getting a message that says you have a valid Apple ID but not an iCloud ID, it's because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Clone system, will it work for both 17" & 20" rev a's

Similar Messages

Maybe you are looking for