Clone tool has stopped working properly, the sample area doesn't follow the target area?

I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
All the best returned,
Ray

Similar Messages

I get the following message: Mozilla Firefox plugin-container has stopped working properly. What do I do?

the message:" Mozilla Firefox plugin-container has stopped working properly" appears regularly in my maintenance center. I am on Windows 7 and Firefox 3.6.17

I had the same type of failure. It was caused by a FF upgrade from V4 to V9.1. Dearing 1955 did not say what version caused the problem. My USB ports started acting up. I could not install the Webcam that was installed before. The HP Scanner of my OJ 8500 stopped working (USB). Did get it to work via Wireless. Removing FF did not clear the problem. Believe I have infected USB driver now.

Oracle BI Administration tool has stopped working

Just now finished the 11g installation.But im not able to open BI Administrator.Im getting this error.Please help.
"Oracle BI Administration tool has stopped working
A problem caused the program to stop working correctly.Please close the program"

I followed the below steps(taken from this forum) for installing OBIEE11g 64 bit version in a 64 bit machine.Installation completed successfully.But not able to open BI Administration tool.Any suggestions???
There is not a particular 64bit installation. I think it works like this: if you are using a 64bit JDK the apps server is also running 64 bit.
You can find the generic jar here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You install this by a command like this (you have to look up the documentation): java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
So these were my steps:
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar)
- installed OBI as "software only"
- configured OBIi (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
All together it does not take much longer then the 32bit install. Only some extra steps to do.
---------------------------------------------------------------------------------------------------------------------------------------------------------------

ITunes has stopped working properly.

iTunes has stopped working properly.

Ok.
3 days ago, for no apparent reason my itunes stopped working.
This only happens after it has "synced" with the itunes store and prepares to upload remaining songs.
NOTHING has changed since then other than downloading latest itunes (11.1...whatever) which i was recommended to do after it stopped working.
I am using windows 7
Latest itunes version (for windows)
I have thousand of songs in icloud, which were uploading fine until 3 days ago.
Windows message reads something like: Itunes has stopped working properly, windows will now close the programme blah blah balh.
Bit annoyed. Tried copying the dll file from QT that somebody mentioned earlier. Also tried "repairing" programme and re-downloading update.
Not working still!!!! HELP PLEASE!!!

Mozilla Firefox plugin-container has stopped working properly

Mozilla Firefox plugin-container has stopped working properly. FOR THE UMPTEENTH DAMN TIME... HOW DO I FIX THIS on Firefox 3.6.13!?!?!?!?!?!?!?
''edited by a moderator - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines ''

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Receiving a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" error

One of our users has Windows 7 Installed. When she emails out attachments, she right clicks it and chooses to "Sent To" and then selects "Mail Recipient".
It opens and creates a new email fine. Upon pressing SEND it gives a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" It does successfully email.
I attached a screenshot.

Hi,
Have you tried to repair the Office for the user?
If that won't work, open the Explorer, and navigate to
%APPDATA%\Microsoft\Windows\SendTo
Delete the file named Mail recipient. (Make a backup before you doing that, or you can just move it to the other folders.)
And then open folder
C:\Windows
Find the file named Win.ini, open it with Notepad, find the section that begins with [Mail], and then add the following lines. Some lines may already exist, but you need all of them for this feature.
[Mail]
MAPI=1
CMC=1
CMCDLLNAME=mapi.dll
CMCDLLNAME32=mapi32.dll
MAPIX=1
MAPIXVER=1.0.0.1
OLEMessaging=1
Save it and quit Notepad, restart the Computer.
See if we can get rid of it.
Sincerely,
Max Meng
Forum Support
Come back and mark the replies as
answers if they help and unmark them if they provide no help.

KTpass.exe - Kerberos keytab tool has stopped working

Hi,
I'm trying to setup single sign in my firewall which requires me to use KTpass.exe to create a kerberos key.
I've never used Ktpass.exe - and i do not know how to use it. I simply follow instructions from my firewall tech and I'm suppose to run this command.
ktpass -out c:\key.fw -princ FirewallLogin/[email protected] -pass pasword -mapop set +desonly -crypto DES-CBC-CRC -ptype KRB5_NT_PRINCIPAL -mapuser domain\UserLogin
from the command promt I get:
Targeting domain controller: Host.domain.local
successfully mapped firewalllogin/HOSTNAME to UserLogin.
Password successfully set!
and a window appear:
Kerberos keytab tool has stopped working - Windows can check online for a solution to the problem.
Problem Details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: ktpass.exe
Application Version: 5.2.3790.3959
Application Timestamp: 45d69729
Fault Module Name: ktpass.exe
Fault Module Version: 5.2.3790.3959
Fault Module Timestamp: 45d69729
Exception Code: c0000005
Exception Offset: 0000832e
OS Version: 6.0.6002.2.2.0.305.9
Locale ID: 4105
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I am running this command in a Windows Small Business Server 2008.
I have no clue whats happening? Can any please advise.
Thanks in advance.
Richard Chung

Hi Mohit,
Thank you for your reply. My KTpass.exe version is 5.2.3790.3959. and yes, I am running the the tool as admininstrator in command prompt.
Kerberos keytab tool has stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: ktpass.exe
Application Version: 5.2.3790.3959
Application Timestamp: 45d69729
Fault Module Name: ktpass.exe
Fault Module Version: 5.2.3790.3959
Fault Module Timestamp: 45d69729
Exception Code: c0000005
Exception Offset: 0000832e
OS Version: 6.0.6002.2.2.0.305.9
Locale ID: 4105
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Plug-in Registration Tool has stopped working

Hi all,
On Dynamics CRM 2015 Online, I have installed a Plugin Profiler using the Plugin Registration Tool provided in the SDK for CRM 2015.
When I start debugging using the profiler and Visual Studio 2013 the plugin profiler stops working with the error when reaching at the point of code with error. And actual exception is not showing. Any ideas how to resolve this?
ERROR MESSAGE:
[Window Title]
Plug-in Registration Tool
[Main Instruction]
Plug-in Registration Tool has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Debug] [Close program]
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Hello Jochen,
I tried after executing the plugin registration tool as administrator. Still no difference.
Thanks.
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Racle BI Administration Tool has stopped working

hi,
i have installed Oracle BI successfully, i have import table from my oracle database successfully,but when i want to see the data of the table ,error message appears
it say :
Oracle BI Administration Tool has stopped working
A proplème made that the program stopped working correctly. Windows is going to close this program and to indicate to you if a solution is available
Thanks previously for your help

Hello,
What is your version? OBI 11.1.1.3 administration tools could not worked on 64 bit. You must upgrade.
ankist
Edited by: ankist on Jan 12, 2012 2:24 PM

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. Any ideas?

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. It finds some things, but is not to be depended upon. Any ideas?

Try reindexing spotlight: Spotlight: How to re-index folders or volumes - Apple Support
If you still have problems, open Console app, select All Messages, then search for mds in the search field. Then search for mdworker. See if there are any messages indicating it is having problems with certain files.
You can also delete the index altogether and cause it to reindex with a command in Terminal. I have always assumed the method above will do the same, but I'm not certain. You must run this command while logged into an admin account. Copy the whole line and paste it into Terminal.
sudo mdutil -E /
sudo temporarily elevates your privileges and will ask for your password. When you type it in, there won't be any response in the Terminal. Just type it and hit return.

Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas?

Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas? I should probaly also add that I have also recently tried to download a screen recorder from safari and a message keeps popping up and saying that it can't verify server, even for this website

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Files cannot be downloaded from Safari on an iPod touch.

Intel display driver has stopped working properly, distributed by Lenovo

Toshiba Satellite L355-S7915 with Windows Vista Home Basic SP2 32-bit: Keep getting "Intel display driver has stopped working properly and has recovered" when turn on computer or log on with new user. Driver version is 7.15.10.1829. This is more of an annoyance, which I can enter through and continue, but I would like to get the messages to stop. Any ideas? Thanks.

Me too, only I am using a desktop through e machines with an Intel 82945G Express Chiplet Family. And my pc just crashes and it is getting very annoying! for the longest time Vista couldn't provide a solution and today is sent my to Lenovo. I may be out of touch with the tech world but to my understanding I don't have anything "Lenovo" unless thats the new fancy name for Intel. But I can't seem to find a solution for this problem and am sick of it! Any advice? thanks and happy holidays!

What is this : "Firefox has stopped working Window is chcking for a solution to the program"

I am Using Mozila 3.6.3 , I am so happy with this version. But Many times it show error
"Firefox has stopped working
Window is checking for a solution to the program"
and then it show
""Firefox has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is Available."
| Close Program |"
How i solved out it

Your Firefox 3.6 is apparently crashing or hanging.
Firefox 3.6 is no longer supported and is not secure, so you are increasing the risks to your computer and personal data. It is probably a good time to upgrade to Firefox 14 from http://www.mozilla.org/en-US/firefox/all.html
Do not use any option from Windows or firefox that offers to remove personal data (because that destroys bookmarks, passwords and settings). If you have problems once you install a recent version you may neeed to look at
* [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]

The round button that allows me to get out of an app or to move or delete apps has stopped working. Once I am in an app the only way to get out of the app is to power off my ipod completely. Help!

The round button that allows me to get out of an app or to move or delete an app has stopped working. Once I am in an app, the only way to get out of it is to power off my ipod completely. Help!

Try this previous discussion:
FIX for iPod Touch Home Button: Apple Support Communities

HT201401 After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

Clone tool has stopped working properly, the sample area doesn't follow the target area?

Similar Messages

Maybe you are looking for