Cloned VM's showing in WSUS Manager but name and IP changing on every refresh
It's likely the WSUS SusClientID, which doesn't get removed during sysprep, that's a duplicate so the records keep overwriting themselves in WSUS. Have a look at this blog for a description and a script to fix:
http://blogs.technet.com/b/sus/archive/2009/05/05/resolving-the-duplicate-susclientid-issue-or-why-d...
Hello all,
We have approx 6 Windows 7 Pro VM's that a group of users use for a specific piece of software. They log on via RDP from their normal machine when they want to use one.
VM's were all cloned from an original. I didn't do it so we don't know how they were prepped although I'm under the impression that the SID issue should be sorted because it is showing in WSUS Manager.
One of our dev's has said it could be an issue from VMWare, possibly there are sharing the same MAC address on their virtual NIC?
Has anyone ever seen this happening?
James
This topic first appeared in the Spiceworks Community
Similar Messages
-
My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe -
Carousel don't show images, only the page name and a "read more" link
Good morning.
I'm trying to get a carousel in my page. I already set a image to one page and on my carousel component, I selected that page.
When I see the carousel, it shows me the page inputed name and a "read more" link instead of the image.
Can anyone tell me what's wrong or missed?
Heres a print screen:
Thanks.What did I do to correct this problem:
When I create a page renderer component, the same automatically creates a jsp file, with the same name as the component. In my Geometrixx copy sites, there's always a "content.jsp" file in the components, despite of the one with the same name of the component. So, instead of build my pages in the componentname.jsp, i'm doing this is these content.jsp. Just doing this, the carroussel works perfectly. For sure is something that I miss in my own jsp files, but even with the same code (copy > paste), in my jsp the carroussel don't work. Anyway, now I can use it. -
hi i'm trying to install updates but Name and then the password I have for the account won't let me in. Is my name my email address?
Updates do not normally require any kind of password access. It is more likely your machine's security is asking for you to allow things to be updated.
-
Firefox shows in task manager, but won't open
Firefox doesn't open, though it opens once in a while. It shows in task manager and takes up 50% CPU usage, and ending process and retrying doesn't work. Profile manager doesn't open either. There's no error message, and have restarted laptop (Windows XP) many times, but no results.
Help would be appreciated!Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
I Changed my ISP and therefore changed my email address, which caused me to change my appleID. I had no problems making the changes to my appleID but now I am having problems with iCloud. My old ID is still showing as my iCloud ID and I can not see where or how to change this. I keep getting an annoying pop up box to enter the password for my OLD appleID as well as error messages that I can't back up to iCloud.
CAn someone please tell me how I can fix this so my iCloud works.
THank you!!!!!Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
Versamail no show incoming mails sender's name and subject after ROM upgrade
It is unlocked GSM 680 before with rom ROW 1.04 and worked quite well. After the upgrade to R01.92 1.12ROW, the incoming emails doesn't show sender's name(address) and subjects, but email content displays correctly. Don't know if the VERSAMAIL program has lost some files or modules. Anyone can help?
Post relates to: Treo 680 (Unlocked GSM)I see the subject of this post specifically mentions a ROM upgrade. I didn't do a ROM upgrade but I had the same exact symptom after installing CJKOS which allows Chinese, Japanese, Korean characters be displayed on my Palm Treo. The CJKOS preferences are not in English but eventually I was able to figure out if I disable that application within that app's preferences, the sender's name and subjects are now appearing. Maybe there is something the few of you are doing that is similar?
Post relates to: VisorPhone -
ITunes shows in Task Manager but doesn't run
I was having an issue where my iTunes would start and show as a process running in Windows Task Manager, however, the GUI interface would never show up. I could end the process, but restarting the application led me to the sam state I was in before; the process was there, but no iTunes.
I am running Windows XP Media Centre 2005 edition with rollup 2, 2Gb of RAM, AVG AntiVirus, all the latest MS patches and Windows Defender all up-to-date. Stopping all the anti virus and anti-malware programs didn't help. Reinstalling iTunes did nothing, and installing the stand-alone version of QuickTime did not work either.
I searched many an archived article to find the particular solution that worked for me, and I have linked to it below.
http://docs.info.apple.com/article.html?artnum=302386
Hope this helps someone in the future. It was a very frustrating exercise, to say the least.
HP Pavilion m7250n Windows XP MCE 2005 Rollup 2http://docs.info.apple.com/article.html?artnum=302386
-
Windows Updates not showing in Configuration Manager but Endpoint updates are working
I have an issue which I have found whilst creating ADR's. I currently have an Endpoint ADR Set up and working and tried to set up a Windows 7 update ADR but cannot get Configuration Manager to locate any updates, I even change properties to just select
the product 'Windows 7' but when pressing preview I still get no results.
This is the output from ruleengine.log when I try to run the rule.
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\4.RUL
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (1) from schedule string (0153BB0000100100) with next occurence (19/11/2014 12:00:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (4) from schedule string (5173BB0000100008) with next occurence (20/11/2014 11:20:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
FindNextEventTime found next event for RuleID 1 as :19/11/2014 12:00:00
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
RuleEngine: Got next rule execution time successfully. Next event is in 30 minutes
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Sleeping for 15 minutes SMS_RULE_ENGINE
19/11/2014 11:29:20 3844 (0x0F04)
Constructing Rule 4 using Auto Deployment Rule Factory
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Rule Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Criterion Skeleton
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Need to Process 1 rules SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Processing Rule with ID:4, Name:Windows 7 Client Update Deployment Rule.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria for AutoDeployment Rule 4
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Rule Criteria is: <UpdateXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="SMS_SoftwareUpdate" LocaleId="1033"><UpdateXMLDescriptionItems><UpdateXMLDescriptionItem
PropertyName="BulletinID" UIPropertyName=""><MatchRules><string>MS</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="DateRevised" UIPropertyName=""><MatchRules><string>1:0:0:0</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem
PropertyName="_Product" UIPropertyName=""><MatchRules><string>'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="IsSuperseded"
UIPropertyName=""><MatchRules><string>false</string></MatchRules></UpdateXMLDescriptionItem></UpdateXMLDescriptionItems></UpdateXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:BulletinID, PropertyValue:MS
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:DateRevised, PropertyValue:1:0:0:0
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:_Product, PropertyValue:'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:IsSuperseded, PropertyValue:false
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Query to run is: select CI_ID from dbo.fn_ListUpdateCIs(1033) ci~where IsExpired=0~ and (BulletinID like N'%MS%')~ and (DateRevised>=N'2013-11-19 11:29:20')~ and (IsSuperseded=0)~ and (CI_ID in (select CI_ID from v_CICategories_All
where CategoryInstance_UniqueID in (N'Product:bfe5b177-a086-47a0-b102-097e4fa1f807')))
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule resulted in a total of 0 updates
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluation Resultant XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Content Download Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Download Rule Action XML is: <ContentActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PackageID>NC20000A</PackageID><ContentLocales><Locale>Locale:9</Locale><Locale>Locale:0</Locale></ContentLocales><ContentSources><Source
Name="Internet" Order="1"/><Source Name="WSUS" Order="2"/><Source Name="UNC" Order="3" Location=""/></ContentSources></ContentActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
0 update(s) need to be downloaded in package "NC20000A" (\\SCCM2012R2\UpdateServicesPackages\Updates\Windows 7 Updates)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
List of update(s) which match the content rule criteria = {}
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
No new update was added to the package. Package "NC20000A" would not be updated.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Download action completed for the AutoDeployment
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Create Deployment Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>NC20000C</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>7</Duration><DurationUnits>Days</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>false</AllowRestart><DisableMomAlert>true</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>false</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>false</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>HideAll</UserNotificationOption><LimitStateMessageVerbosity>true</LimitStateMessageVerbosity><StateMessageVerbosity>1</StateMessageVerbosity><AllowWUMU>false</AllowWUMU><AllowUseMeteredNetwork>false</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Rule XML... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element DeploymentId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupName SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
CRuleHandler: Rule 4 Successfully Applied! SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Updated Success Information for Rule: 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Deleting Rule 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
I am a bit stumped with this so if anyone can help I would be grateful.
Thanks
PaulJust seen wsyncmgr is busy syncing updates so actually I think I need more patience :-)
That's always a good idea when using ConfigMgr ...
Torsten Meringer | http://www.mssccmfaq.de -
i start firefox, nothing happens, but firefox.exe is running according to the task manager, i run it again, and it appears on the screen but nothing happens, it doesnt connect to anywhere, just sits there, nothing clicks, no menus pull down but i dont get any not responding error
i start firefox, nothing happens, but firefox.exe is running according to the task manager, i run it again, and it appears on the screen but nothing happens, it doesnt connect to anywhere, just sits there, nothing clicks, no menus pull down but i dont get any not responding error
-
My iPod touch won't show up in iTunes, but charges and shows up on different computers.
My iPod touch 5th gen last was synced with my iMac a couple weeks ago. Now when I plug it into iTunes, it won't show up. It's done this before and I've fixed it by updating iTunes, restarting the iPod/computer etc, but it seems I've tried everything. I've connected it to different USB ports, and it charges in all of them but doesn't show up. When I plug it in, Dropbox recognizes it and can get the pictures off, but iTunes won't work. I tried connecting the iPod to a different computer, and it showed up in iTunes just fine. I have the latest version of iTunes. I didn't restore my iPod from the other computer because if I can't get it to re-sync with this computer I'd rather not lose all my data. It seems I need to reinstall iTunes, but I don't know how- will it delete all my music that I already have on there?
Any help would be greatly appreciated, thanks!I had this issue, I fixed it by going to:
Start > Control Panel > Devices and Printers
Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes. -
Java Dispatcher Down but Server0 and SDM up after system refresh
Hello,
I have done system refresh from PRD to QAS of CRM system - dual stack.Once after the system refresh ABAP is up and running fine but Java is down (Only Dispatcher is down. Both SDM and Server0 are running fine).
I have followed Note 609603 - Problems with Multiple NICs and SAP J2EE Engine and have given the correct host name but the no luck..
std_dispatcher.out says the following error:
Cannot attach to the Message Server. Can't open port [3925] on host [<Source Host Name>/Source IP Address].
Could you please let me know if I need to do any changes in the Config tool?
Thanks,
SubbuHI,
IN DB restore the hostname of java system stored in profiles would be your PRD.
Go to Configtool in Edit mode -- cluster --> change the hostnames in Instance profile -- and under other files like bootstrap etc whereever you find PRD hostname.
And otherwise for JAVA system you should use export/import option.
Regards,
Tajinder -
How to filter by manager's name using selection screen
Hi all,
I am trying to modify the report to filter data from the report based on the manger name given in selection screen. As the manger's name was given in selection screen.. records have to come only of the employee how were working under that entered manager name.
I am unable to follow this code to modify.. where to add select criteria to filter... please make modify to my code..
I am pasting my code here, Can any one kindly help for this scenario.
TABLES: PA0001, "HR Master Record: Infotype 0001 (Org. Assignment),
PA0002,
P0000,
PA9001,
PA0007,
HRP1001, "Infotype 1001 DB Table
PA0034. "HR Master Record: Infotype 0034 (Corporate Function)
*Internal table for holding output data
DATA: IT_PA0002 LIKE PA0002 OCCURS 100 WITH HEADER LINE,
IT_PA9001 LIKE PA9001 OCCURS 100 WITH HEADER LINE,
IT_PA0007 LIKE PA0007 OCCURS 100 WITH HEADER LINE,
IT_PA0034 LIKE PA0034 OCCURS 100 WITH HEADER LINE.
DATA: IT_RET LIKE BAPIRET2,
IT_ACT LIKE BAPI_SWHACTOR OCCURS 0,
IT_STR LIKE BAPI_STRUC OCCURS 0,
IT_ORG LIKE BAPI_OBJEC OCCURS 0,
IT_POS LIKE BAPI_OBJEC OCCURS 0,
IT_SUP LIKE BAPI_OBJEC OCCURS 0,
IT_FCAT LIKE BAPI_HRAQFIELDDESCRIPTION OCCURS 0,
IT_FDAT LIKE BAPI_HRFIELDDATA OCCURS 0,
IT_ORGS TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
IT_POSS TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
IT_SUPR TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
V_DATE TYPE SY-DATUM,
IT_T500P LIKE T500P OCCURS 0 WITH HEADER LINE,
IT_TT500P LIKE T500P OCCURS 0 WITH HEADER LINE,
IT_T001P LIKE T001P OCCURS 0 WITH HEADER LINE .
DATA: IT_PA0001 LIKE PA0001 OCCURS 100 WITH HEADER LINE,
P_ENDDA LIKE sy-datum.
DATA: Begin of I_HRE,
pernr like pa0001-pernr, "Emp Number
nachn like pa0002-nachn, "Last Name
vorna like pa0002-vorna, "First Name
plans like BAPI_OBJEC-LONG_TEXT, "Position
div_text like pa9001-div_text,
kztim like ZKZTIM_VAUES-name,
stext like T591S-STEXT, "Corporate function text
werks like BAPI_OBJEC-LONG_TEXT,
btrtl like pa0001-btrtl,
orgeh like BAPI_OBJEC-LONG_TEXT,
kostl like pa0001-kostl,
mstbr like pa0001-mstbr, "Supervisor
End of I_HRE.
DATA: I_HR like I_HRE occurs 100 with header line.
DATA: V_PLANS LIKE PA0001-PLANS,
V_EMP LIKE PA0001-PERNR,
V_KOSTL LIKE PA0001-KOSTL,
V_SUPER LIKE BAPI_OBJEC-LONG_TEXT,
V_EMP_POS LIKE BAPI_OBJEC-LONG_TEXT,
V_SUPER_POS LIKE BAPI_OBJEC-LONG_TEXT,
V_HEADER TYPE N VALUE 1,
V_COUNTER TYPE N VALUE 1,
EMP_INDICATOR TYPE N,
V_ORGEH LIKE BAPI_OBJEC-LONG_TEXT,
V_WERKS LIKE BAPI_OBJEC-LONG_TEXT,
V_KZTIM LIKE ZKZTIM_VAUES-NAME,
V_STEXT LIKE T591S-STEXT.
DATA: v_file TYPE string, "Detail Filename
v_filerecord(1000),
f_filerecord(1000),
drive(3),
mstbr like pa0001-mstbr, "Supervisor
count type n value 0.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_PERNR FOR P0000-PERNR,
S_WERKS FOR PA0001-WERKS,
S_BTRTL FOR PA0001-BTRTL,
S_PERSG FOR PA0001-PERSG,
S_ORGEH FOR PA0001-ORGEH,
S_DIV FOR PA9001-DIV_CODE,
S_KZTIM FOR PA0007-KZTIM,
S_sname for pa0001-sname, " this is to enter name
" as manager name
S_FUNKT FOR PA0034-FUNKT.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION1 WITH FRAME TITLE TEXT-002.
PARAMETERS: P_BEGDA LIKE SY-DATUM DEFAULT sy-datum.
* P_ENDDA LIKE SY-DATUM DEFAULT '99991231'.
SELECTION-SCREEN END OF BLOCK SELECTION1.
START-OF-SELECTION.
if P_BEGDA is initial.
p_begda = sy-datum.
endif.
if P_ENDDA is initial.
p_endda = sy-datum.
endif.
if S_PERSG is initial.
* S_PERSG-SIGN = 'I'.
* S_PERSG-OPTION = 'EQ'.
* S_PERSG-LOW = '1'.
* APPEND S_PERSG.
* S_PERSG-SIGN = 'I'.
* S_PERSG-OPTION = 'EQ'.
* S_PERSG-LOW = '6'.
* APPEND S_PERSG.
S_PERSG-SIGN = 'I'.
S_PERSG-OPTION = 'NE'.
S_PERSG-LOW = '5'.
APPEND S_PERSG.
endif.
SELECT * FROM PA0001 into IT_PA0001
WHERE PERNR IN S_PERNR
AND WERKS IN S_WERKS
AND BTRTL IN S_BTRTL
AND PERSG IN S_PERSG
AND ORGEH IN S_ORGEH
AND BEGDA LE P_BEGDA
AND ENDDA GE P_ENDDA.
APPEND IT_PA0001.
ENDSELECT.
IF not S_DIV[] is initial.
SELECT * FROM PA9001 into IT_PA9001
WHERE DIV_CODE IN S_DIV.
APPEND IT_PA9001.
ENDSELECT.
ENDIF.
IF not S_KZTIM[] is initial.
SELECT * FROM PA0007 into IT_PA0007
WHERE KZTIM IN S_KZTIM.
APPEND IT_PA0007.
ENDSELECT.
ENDIF.
IF not S_FUNKT[] is initial.
SELECT * FROM PA0034 into IT_PA0034
WHERE FUNKT IN S_FUNKT.
APPEND IT_PA0034.
ENDSELECT.
ENDIF.
SORT IT_PA0001 by SNAME.
LOOP AT IT_PA0001.
IF not S_DIV[] is initial.
READ TABLE IT_PA9001 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
IF not S_KZTIM[] is initial.
READ TABLE IT_PA0007 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
IF not S_FUNKT[] is initial.
READ TABLE IT_PA0034 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
V_COUNTER = 1.
V_EMP = IT_PA0001-PERNR.
V_KOSTL = IT_PA0001-KOSTL.
* WRITE: (10) V_EMP, (20) PA0002-NACHN, (20) PA0002-VORNA.
WRITE: / SY-VLINE. " Left border
WHILE V_EMP NE ''.
PERFORM GET_SUPER CHANGING V_EMP V_SUPER
V_EMP_POS.
if v_emp ne ''.
select single * into it_pa0002 from pa0002
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
IF V_HEADER = 1.
PERFORM HEADING.
V_HEADER = 0.
ENDIF.
WRITE: (10) V_EMP, (17) IT_PA0002-NACHN
,(17) IT_PA0002-VORNA, (40) V_EMP_POS.
move v_emp to i_hr-pernr.
move IT_PA0002-NACHN to i_hr-nachn.
move IT_PA0002-VORNA to i_hr-vorna.
move V_EMP_POS to i_hr-plans.
EMP_INDICATOR = V_COUNTER.
IF V_COUNTER = 1.
select single * into it_pa9001 from pa9001
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
select single * into it_pa0007 from pa0007
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
PERFORM GET_KZTIM_TEXT CHANGING it_pa0007-kztim V_KZTIM.
select single * into it_pa0034 from pa0034
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
PERFORM GET_FUNKT_TEXT CHANGING it_pa0034-funkt v_stext.
write: (8) IT_PA9001-DIV_CODE, (17) V_KZTIM,
(25) V_STEXT.
move IT_PA9001-DIV_CODE to i_hr-div_text.
move v_KZTIM to i_hr-kztim.
ENDIF.
IF V_COUNTER = 0.
WRITE: (1) '|'.
ENDIF.
IF V_COUNTER = 1.
PERFORM GET_NAMES.
WRITE: (20) V_WERKS, (5) IT_PA0001-BTRTL
,(20) V_ORGEH,(11) V_KOSTL, (3) '|'.
V_COUNTER = 0.
move V_WERKS to i_hr-werks.
move IT_PA0001-BTRTL to i_hr-btrtl.
move V_ORGEH to i_hr-orgeh.
move V_KOSTL to i_hr-kostl.
ENDIF.
clear it_pa0002.
refresh it_pa0002.
endif.
V_EMP = V_SUPER.
move V_SUPER to i_hr-mstbr.
if EMP_INDICATOR EQ 1.
append i_hr.
endif.
clear i_hr.
ENDWHILE.
NEW-LINE.
CLEAR : V_KZTIM, it_pa9001, it_PA0007.
ENDLOOP.
* Check if its a background Job
IF SY-BATCH NE SPACE.
perform write_file. "Output File
ENDIF.
ULINE.
*& Form GET_SUPER
* This subroutine takes the position number and get the position
* number that it reports to and then who is holding that position and
* then the name of the person who is holding that position in order to
* provide the supervisors name for the person in that position.
* --> p1 text
* <-- p2 text
FORM GET_SUPER CHANGING EMP_SUB EMP_SUPER
EMP_SUB_POS .
DATA: v_reporto like hrp1001-varyf value space,
v_holder like hrp1001-varyf value space,
v_filled like hrp1001-varyf value space,
v_otype like hrp1001-otype value space,
v_objid like hrp1001-objid value space.
CLEAR: v_reporto, v_holder, v_filled, v_otype, v_objid,
EMP_SUB_POS.
Select single plans
into v_plans
from pa0001
where pernr = emp_sub
and begda LE p_begda
and endda GE p_endda.
CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
EXPORTING
PLVAR = '01'
OTYPE = 'S'
OBJID = v_PLANS
KEYDATE = SY-DATUM
SCENARIO = ' '
* EVALPATH = 0
EVALDEPTH = 0
IMPORTING
RETURN = IT_RET
TABLES
* ACTORTAB = IT_ACT
* STRUCTURALDATA = IT_STR
OBJECTSDATA = IT_SUP
* FIELDCATALOGUE = IT_FCAT
* FIELDDATA = IT_FDAT
IF SY-SUBRC EQ 0.
READ TABLE IT_SUP INTO IT_SUPR
WITH KEY PLAN_VERS = '01'
OBJECTTYPE = 'S'
OBJECT_ID = v_PLANS.
IF SY-SUBRC EQ 0.
MOVE IT_SUPR-LONG_TEXT TO EMP_SUB_POS.
ENDIF.
ENDIF.
Select Single varyf
into v_reporto
from hrp1001
where otype = 'S'
and objid = v_plans
and rsign = 'A'
and relat = '002'
and begda LE p_begda
and endda GE p_endda.
if sy-subrc = 0.
move v_reporto+0(1) to v_otype.
move v_reporto+2(8) to v_objid.
Select single varyf
into v_holder
from hrp1001
where otype = v_otype
and objid = v_objid
and rsign = 'A'
and relat = '008'
and begda LE p_begda
and endda GE p_endda.
if sy-subrc = 0.
move v_holder+0(1) to v_otype.
move v_holder+2(8) to v_objid.
EMP_SUPER = v_objid.
IF EMP_SUB = EMP_SUPER.
EMP_SUPER = ''.
ENDIF.
* Select single varyf
* into v_filled
* from hrp1001
* where otype = v_otype
* and objid = v_objid
* and rsign = 'A'
* and relat = '209'.
* if sy-subrc = 0.
* CLEAR: IT_RET, IT_ACT, IT_STR, IT_FCAT, IT_FDAT,
* IT_SUP, IT_SUPR.
* REFRESH: IT_POSS.
* move v_filled+0(2) to v_otype.
* move v_filled+2(8) to v_objid.
* CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
* EXPORTING
* PLVAR = '01'
* OTYPE = v_otype
* OBJID = v_objid
* KEYDATE = V_DATE
* SCENARIO = ' '
** EVALPATH = 0
* EVALDEPTH = 0
* IMPORTING
* RETURN = IT_RET
* TABLES
** ACTORTAB = IT_ACT
** STRUCTURALDATA = IT_STR
* OBJECTSDATA = IT_SUP
** FIELDCATALOGUE = IT_FCAT
** FIELDDATA = IT_FDAT
* IF SY-SUBRC EQ 0.
* READ TABLE IT_SUP INTO IT_SUPR
* WITH KEY PLAN_VERS = '01'
* OBJECTTYPE = v_otype
* OBJECT_ID = v_objid.
* IF SY-SUBRC EQ 0.
* MOVE IT_SUPR-LONG_TEXT TO EMP_SUPER.
* ENDIF.
* ENDIF.
* endif.
endif.
endif.
if sy-subrc <> 0.
EMP_SUPER = ''.
endif.
ENDFORM. " GET_SUPER
*& Form HEADING
* text
* --> p1 text
* <-- p2 text
FORM HEADING .
FORMAT INTENSIFIED OFF. " Remove any INTENSIFIED
FORMAT COLOR COL_HEADING INTENSIFIED." Title color
WRITE: (10) 'Employee', (17) 'Last Name'
,(17) 'First Name', (40) 'Position'
,(8) 'Division', (17) 'Management Type'
,(25) 'Corporate Function'
,(20) 'Personnel Area', (5) 'PSA'
,(20) 'Org. Unit',(11) 'Cost Center',(3) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
ULINE . " Line below titles
NEW-LINE.
WRITE: / SY-VLINE. " Left border
FORMAT COLOR OFF.
ENDFORM. " HEADING
*& Form GET_NAMES
* text
* --> p1 text
* <-- p2 text
FORM GET_NAMES .
CLEAR: IT_RET, IT_ACT, IT_STR, IT_ORG, IT_POS, IT_FCAT, IT_FDAT,
IT_ORGS, IT_POSS, V_ORGEH, V_WERKS.
REFRESH: IT_ORGS, IT_POSS.
MOVE SY-DATUM TO V_DATE.
CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
EXPORTING
PLVAR = '01'
OTYPE = 'O '
OBJID = IT_PA0001-ORGEH
KEYDATE = V_DATE
SCENARIO = ' '
* SCENARIO = 'MDT1'
* EVALPATH = '0 '
EVALDEPTH = 0
IMPORTING
RETURN = IT_RET
TABLES
* ACTORTAB = IT_ACT
* STRUCTURALDATA = IT_STR
OBJECTSDATA = IT_ORG
* FIELDCATALOGUE = IT_FCAT
* FIELDDATA = IT_FDAT
IF SY-SUBRC EQ 0.
READ TABLE IT_ORG INTO IT_ORGS
WITH KEY PLAN_VERS = '01'
OBJECTTYPE = 'O '
OBJECT_ID = IT_PA0001-ORGEH.
IF SY-SUBRC EQ 0.
MOVE IT_ORGS-LONG_TEXT TO V_ORGEH.
ENDIF.
ENDIF.
CALL FUNCTION 'HR_TMW_READ_T500P'
EXPORTING
PERSA = IT_PA0001-WERKS
IMPORTING
W500P = IT_T500P
EXCEPTIONS
NO_ENTRY_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC EQ 0.
MOVE IT_T500P-NAME1 TO V_WERKS.
CLEAR: IT_T500P.
REFRESH: IT_T500P.
ENDIF.
* CALL FUNCTION 'HR_TMW_READ_T001P'
* EXPORTING
* PERSA = PA0001-WERKS
* BTRTL = PA0001-BTRTL
* IMPORTING
* W001P = IT_T001P
* EXCEPTIONS
* NO_ENTRY_FOUND = 1
* OTHERS = 2.
* IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
* IF SY-SUBRC EQ 0.
* MOVE IT_T001P-BTEXT TO IT_HRR05-BTRTL.
* ENDIF.
ENDFORM. " GET_NAMES
*& Form GET_KZTIM_TEXT
* text
* <--P_V_EMP text
* <--P_V_KZTIM text
FORM GET_KZTIM_TEXT CHANGING P_KZTIM_ID
P_KZTIM.
select single NAME into P_KZTIM from ZKZTIM_VAUES
where TYPE eq P_KZTIM_ID.
ENDFORM. " GET_KZTIM_TEXT
*& Form GET_FUNKT_TEXT
* text
* <--P_V_EMP text
* <--P_V_KZTIM text
FORM GET_FUNKT_TEXT CHANGING P_FUNKT_ID
P_STEXT.
select single STEXT into P_STEXT from T591S
where SPRSL eq 'EN' and
INFTY eq '0034' and
SUBTY eq P_FUNKT_ID.
ENDFORM. " GET_KZTIM_TEXT
*& Form write_file
* text
* --> p1 text
* <-- p2 text
FORM write_file .
* Checking the System ID
if sy-sysid = 'RD1'.
drive = 'D:\'.
else.
drive = 'M:\'.
endif.
* concatenate drive sy-sysid
* '\Output\Reports\HR\HR_Public\Emp_Hierarchy'
* sy-datum
* '.xls' into v_file.
concatenate drive sy-sysid
'\Output\Reports\HR\HR_Public\Emp_Hierarchy.xls'
into v_file.
OPEN DATASET v_file FOR OUTPUT in text mode encoding default.
concatenate 'Employee'
'Last Name'
'First Name'
'Position'
'Division'
'Management Type'
'Corporate Function'
'Personnel Area '
'PSA'
'Org. Unit'
'Cost Center'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
into v_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
transfer v_filerecord to v_file. "Writing to file
clear v_filerecord.
loop at IT_PA0001.
do.
if count eq 0.
read table i_hr with key pernr = IT_PA0001-pernr.
concatenate i_hr-pernr
i_hr-nachn
i_hr-vorna
i_hr-plans
i_hr-div_text
i_hr-kztim
i_hr-stext
i_hr-werks
i_hr-btrtl
i_hr-orgeh
i_hr-kostl
into v_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
mstbr = i_hr-mstbr.
count = count + 1.
else.
read table i_hr with key pernr = mstbr.
concatenate v_filerecord
i_hr-pernr
i_hr-nachn
i_hr-vorna
i_hr-plans
into f_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
v_filerecord = f_filerecord.
mstbr = i_hr-mstbr.
clear i_hr.
endif.
if mstbr eq space.
exit.
endif.
enddo.
transfer v_filerecord to v_file. "Writing to file
clear: v_filerecord, f_filerecord, count.
endloop.
CLOSE DATASET v_file.
ENDFORM. " write_file
Edited by: Surender Batlanki on Feb 20, 2008 7:50 AM
Edited by: Surender Batlanki on Feb 20, 2008 7:59 AM
Edited by: Surender Batlanki on Feb 20, 2008 8:12 AM
Edited by: Surender Batlanki on Feb 20, 2008 3:16 PM
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 9:26 AMHi Surender,
In the Perform GET_SUPER, you are getting manager's OBJID. Use this OBJID and from PA0001 get Manger's name.
While passing data to output table, filter that table by Manager's name and then pass output table for display.
Hope this helps u.
<REMOVED BY MODERATOR>
Regards,
Preeti
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 9:26 AM -
How to find sales doc creator Manager's name & ID
Hi,
Can anybody tell me how to find sales document creator Manager's Name (Supervisor Name) and Mail id?
regards
rc gopiHi,
I have business requirement that whenever picked quantity mismatch with the confirmed quantity it should send a mail to Document creator as well as to his supervisor or manager. I could not find document creator where he linked with his manager.
So where will i find document creator Manager's Name and ID and where it is linked/
Thanks and regards,
RC Gopi -
Since i upgraded to 5.0.1 . My iphone contacts caller id shows email address not contact name and number. Is this a settings issue?
Hi, it's maybe happening the same here!
I have an iphone 3gs. Since I did the upgrade to ios5, when I receive an sms with the notification of a missed call I am no longer able to see if it's coming from a number of my contact list, because in the sms the message correspondence for that contact underlines now the number PLUS the first 2 cifres of the date! So the number results always being 2 numbers longer and it's impossible get to the original.
That's really a major problem for me, as I'm no longer able to know who has called me, if someone I know (and who) or if a new number.
I add a capture to explain it better (I have banned a couple of cifres for privacy reasons).
Anyone solved the problem or can help please?
Thank you!
Maybe you are looking for
-
Some asset classes do not show up for a user in S_ALR_87011990
Hi When the asset history sheet is run in S_ALR_87011990, a user is unable to display some asset classes in the report. This was referred to security team. They say that everything looks fine and nothing appears wrong for that user--roles and profile
-
Hello Forums Is there any automatic processes that updates already installed printers on workstations if the Printer Profiles is updated e.g. with another tray, or do i have to delete the printer and reinstall it manually with that /ipp webpage? - Mi
-
Hi, I am converting Lables in English to Arabic. I am using the following cmd to translation java oracle.jrad.tools.trans.imp.XLIFFImporter $JAVA_TOP/grpepm/oracle/apps/per/selfservice/webui/AR/CustomReviewPG.xlf -username apps -password appsuat -dbc
-
I would like to write a script to do this for about a 100 CentOS users. I don't want each of them changing preferences on their browser.
-
Can you copy Classic Planning Applications?
Hi, Is it possible to take an existing Classic Planning application, and make a copy (or duplicate version) of it? For Essbase applications, this is a simple process in EAS, just right click the application and hit Copy. However, while this method wi