Cloning a Track for the Opposite Stereo Channel

Hey folks, quick question:
So I did some recording this past weekend, but unfortunately, when I imported it all into GarageBand, I found that the audio had only been recorded into the left stereo channel (meaning if you were wearing headphones, you'd hear everything in the left ear, and nothing in the right). I figure I can probably fix this pretty easily if I just clone the track and set it to the opposite stereo channel. I just don't know how to do this in GB.
Any help would be greatly appreciated.
Thanks.

Hi,
This would be a better tutorial that helps you out with putting a mono sound into stereo(the example here is that there is a guitar audio but it is only played on the left, the user wants to make a stereo).
Check it our here:
http://myrightbrain.wordpress.com/2007/09/28/garageband-how-to-create-stereo-tra cks/
It should be pretty straightforward. Let me know if you have any other questions.
Hope this helps,
Vicente Tulliano.

Similar Messages

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

HT1539 how to get the french track for the digital download

how to get the french track for the digital download from having purchased a DVD at the store

Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H.

Two Tracks for the same Runtime System?

Hello,
can you please tell me if it is allowed to connect two tracks to the same runtime systems?
We have already a track connected to our systems. Now we have created a new track to deliver different content to those systems. We wanted to connect the new track to the same runtime systems. Our basis team told me that a where-used message came up that told them "The following runtime systems are already used elsewhere in the CMS domain".
Can you tell us if we will get problems because of this?
Thanks in advance,
Br,
Michael

Hello again,
ok now, thats something completely different CRM modification is always special.
To be honest i cannot tell for sure what will happen. As far as i know the default deploy strategy of NWDI is "deploy any version" which means NWDI will order SDM to just deploy not regarding any SDM Version (you are on a 7.0x System right?)
So it should be possible if everything else, excelt those 2 DCs is the same things should work. But if not the last deplyoed version of the shared DCS will be active. Which might lead to problems then.
As far as you described, the setup is as the CRM modification guides mentioned.
My first thought is that you are not forced to use CUSTCRMPRJ as SC name for the projects as far as I know. OS maybe the leanest thing would be to just use CUSTCRMPRJ_light (.o)) for the second track.
Hmmm not sure if this is a good idea or thought to the end. I don't have the CRM modifications guide at hand at the moment. But I guess there was a part where something was mentioned similar to this.
After all I have to say:Sorry. I can't give you solid, reliable tip/advice for this case. Maybe my thought will help you.
Or maybe someone else knows better.
Have a good time
Jan

PC able to detect all except for the analog output channel of my SCB-68 device.

I would like to use the analog output channel of my SCB-68 device. I tried to locate the analog o/p using the wizard but still unable to detect. Why is that so?
Any possible steps/procedure that i have missed out?
Thanks

Rezn,
Aha, therein lies the problem. This was what I suspected, and thus my question as to which data acquisition card you are using. The DAQCard-AI-16XE-50 has analog inputs, digital I/O, but no analog outputs at all. So your card is working as it should, but it has no analog outputs.
If you have the 2002 National Instruments catalog, you can see this in a table on page 231 (your DAQ card is the one on the bottom), or check this pdf file:
http://www.ni.com/pdf/products/us/2mhw254-255e.pdf
Your card is also called the NI6012E. Check out the small table on the first page.
Mark

Error message IPC 6023 for the Bt sport channels 5...

Had this problem for a week now and although help desk has been helpful the problem is still not resolved.
One chap says its the broadband another says its the youview box. I have a technical back ground and i think the broadband is working fine Hub 5 download speed 37 is fine. Youview box does everything else except for these three channels.
My BT fault tracking just says ongoing will call when we have news, but have not had a call for four days now? any ideas anyone ?

Can you get the test channel on 900?
Is the youview connection to the homehub wired or via powerlines etc?
Steve
BT TV Expert
I am a BT Employee and an expert on TV queries. I am here volunteering my own time to give advice, primarily on the BT Vision+ and YouView boxes. Go here for more info.
If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

Multiple arrange tracks for the same instance of a plugin?

Is this possible? I am using DMXIS, a DMX lighting plugin. It's great but I need to run dozens of tracks of automation at the same time. I know I can drop down as many automation tracks as I want but it is confusing that their labling does not reflect the tasks I have given them. Instead of the automation track reading "channel 76", I want it to say "red light, stage right" or whatever. It would help me enormously if I could have a single track, labled differently, for each automation task. Or, almost as good, Can I change the names of the plugin paramaters, as they apear in the automation, so that they tell me what I want to know rather than the name the plugin has given to each paramater?

Yeah I got used to being able to add multiple listeners from working with ActionScript 3 and it was a bit off-putting when I noticed the same feature was not in JavaFX. Thankfully I have not yet been blocked by this issue, but it seems if I was I could get similar functionality by creating a mixin class that stores a map of Sequences of functions by event type. This mixin would also have a function to call all the functions for a given event in order. Then you could just have your event target class extend the mixin and assign the event chaining function as your event function. This gives you a way to add / remove event functions through the mixin interface and not have to know about the specific type of your target.
The situation complicates when you want all the stuff that comes with a full-blown event stack like being able to cancel propagation, etc., but you could also implement these things with a bit more effort

30¢ per track for the privilege to upgrade them, seriously

I am getting this right. No matter what the price (what you paid vs. what it is now) I have to pay 30¢ PER TRACK to get DRM-free and 256k?
When I purchased an album it was $9.99 at 128k and DRM'd. Now the same album is $9.99 at 256 and is DRM-free but I have to pay 30¢ PER TRACK. That just isn't right. How is that money going to the artist? The additional 30¢ cannot be justified.
I accepted it for a few albums early on when their price was more than I originally paid. If I bought an album for $9.99 (128k DRM'd) that was now selling for $12.99 (256k DRM-free) I could grudgingly justify paying $3.00 to upgrade the album. But not if they are the same price.
Am I missing something here?
Do I need to wait until Apple updates their site to see free DRM-free updates to track I've previously purchased?

Unfortunately, early adopters always come up short when something better comes along. Even worse, when it comes to digital music, legal purchasers have been burned for years. People who bought music legally were shackled with restrictive files while people who don't buy music download HQ mp3's they can use for any device.
I think it would have been great if the labels said "Hey, everyone who bought our music legally, free one-time upgrade of your current DRM'd tracks."
But, that's a pipe dream. Apple wanted to go DRM free years ago, this is the labels' doing. However, why can't we upgrade individual albums or tracks? Terrible implementation. It will cost me nearly a grand to upgrade my library, and then I'll have to re-tag and organize my downloads, as iTunes downloads aren't always tagged to my liking. Being able to upgrade individually would help me do a few at a time. I mean, I downloaded a "Complete" set that is over 500 songs and cost $189... now I have to pay another $175 dollars to upgrade it? There is a huge logical flaw here.
I understand that not everything is free and something better is always around the corner with anything you buy, but still.

I Found New Drivers For The Msi Stereo 2 Glasses!!!!

ALELUYA!!!!
EXELENT!!!! I MADE IT!!!
Well for anybody with this problem i found a solution!!!
Well, i found a new drivers..
First.. msi don't make any more your own drivers.. now the msi video adapters use nvidia drivers.. if they have nvidia chipset..
Continue..
Go to this page, and donwload the stereo driver
http://www.nvidia.com/object/3dstereo_45.23
I install with a 50.x and dosent work.. you must uninstall the driver and install the 45.23 driver of nvidia..
http://www.nvidia.com/object/winxp-2k_45.23.html
Well if you do correct. you can play again with the stereo glasses......
and don't try to install newest drivers.. 8)
Now i must go to play Postal 2 in multiplayer with my msi stereo glasses
jejejeje ... nos vemos y suerte para todos...
PENTIUM 4 - 1.6 MHZ
MSI Gforce 4 MX 440 64mb
MSI STEREO 2 GLASSES
MSI Motherboard 485 Pro 2 c
512 MB PC 133
VANTEC Fan Vga / Chipset
QUANTUM 30 GB
VIEWSONIC E70 - 17
CREATIVE SB LIVE DIGITAL
2 VANTEC Cable IDE 90 CM UDMA 33/66/100/133
LG CD-ROM 52X max
CREATIVE DVDROM 6X
CREATIVE DRX 3 DVD DECODER.
PANASONIC CD.RW X4 SCSI
ADAPTEC SCSI Adapter.
VANTEC Multi Function Pannel.

Although you have the new USB drivers for pocketmac, you should first install pocketmac version 4.1.25, then install the driver patch.
Wrt MissingSync, it appears that it will work properly with your new macbook only after you install the latest version of Mac OS X 10.5.6. See https://support.markspace.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=315.
Good luck!

Web based IRC for the Arch Linux channel

Would it be possible for someone to set up the Arch linux IRC channel to be viewable on a Firefox webpage in the same way the Frugalware guys do?
http://frugalware.org/irc.php
It could be really useful to those not familiar with IRC. And it doesn't look that hard to do
A link could then be put on the home page to get there quickly.

CGI:IRC is really practical, if you are on-the-road (= not on your machine) but want to inform some people over chat on something important
i had it running in an earlier version on my old machine to chat with my family when on holidays ... but the installation was pain ... however, i see that this piece of code evolved much and looks really great now
i don't decide for archlinux.org but you have my vote ;-)

OBIEE Usage Tracking for the Export button in Dashboard

Hi All,
I need to capture how many users are exporting a dashboard report into Excel file. Is it possible by using usage tracking? OIn Usage tracking I understand we can capture the user who lands on the dashboard page, but is it possible to capture who all use the export option in a particular dashboard and download to a CSV file?
Thank you for your time and help.

The Report ran successfully in CMC and it already has an instance. Any idea why i coudnt see the Button.
Thanks

Can DAQmxRegisterEveryNSamplesEvent function be used for the Counter Input Channels

Hi, All,
I have an application to count the digitial pulse number. I want to know the time of the coming pulses which start from 1 and increased 4 later, like 1, 5, 9, 13..... The time interval between each pulse is not a fixed value. So I tried to use DAQmxRegisterEveryNSamplesEvent and DAQmxCreateCICountEdgesChan functions. But afterI called the DAQmxStartTask function, it always failed. The board I used is the NI-PCIe-6320. Here is part of my code.
DAQmxErrChk (DAQmxCreateTask("",&m_taskhandle));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(m_taskhandle,"Dev1/ctr0","",DAQmx_Val_Rising, 0, DAQmx_Val_CountUp));
DAQmxErrChk(DAQmxRegisterEveryNSamplesEvent(m_taskhandle, DAQmx_Val_Acquired_Into_Buffer, 4, 0, EveryNSamplesCallback, this) );
DAQmxErrChk (DAQmxStartTask(m_taskhandle));
I don't know the reason. Can Anyone give me some help. Thanks.
Yang
Solved!
Go to Solution.

Hi, John,
What's I what to do is that I have an external digital signal, when the signal goes from low to high, I need do some operations. So I just want to know the time when the digital signal goes from low to high. The frequency of the digital signal is from 0 - 20000Hz. My first plan is to use a counter to count the pulse rising edges. When the number of edge increases one, I do the designed operations. In this method, I can't guarantee I can catch each pulse rising point. Because sometimes the counter will increase more than one in the on-demand mode. For example, the previous content of the counter is xxxx4, but the next reading the content may become xxxx6.
After I learned some ANSI C codes, I found that the ChangeDetectionEvent can help me found time when the signal goes from low to high. So I wrote the following code: (I set the digital signal to P0.0)
DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
DAQmxErrChk (DAQmxCreateDIChan(taskHandle,"Dev1/port0/line0","",DAQmx_Val_ChanPerLine));
DAQmxErrChk (DAQmxCfgChangeDetectionTiming(taskHandle,"Dev1/port0/line0","",DAQmx_Val_ContSamps, 1));
DAQmxErrChk (DAQmxRegisterSignalEvent (taskHandle, DAQmx_Val_ChangeDetectionEvent, 0, Callback , dialog));
DAQmxErrChk (DAQmxStartTask(taskHandle));
int32 CVICALLBACK Callback (TaskHandle taskHandle, int32 signalID, void *callbackData){
CNIPCIE6320Dlg* dialog = static_cast<CNIPCIE6320Dlg*>(callbackData);
dialog->m_event_num++; // Here is to calculate how many events has been triggered
return 0;
Yesterday I used this method to get the pulse rising time. I found the m_event_num is close to the ground truth (In the simulation, I know how may rising pulse I generated). In one two hours test, the offset is almost 400 pulses. But today I did the same tests again. I found the m_event_num got a big difference from the ground truth. The voltage of the whole system today maybe smaller than yesterday, because today the power is from an invertor while yesterday the power is from the electricity supply. So will the lower voltage supply will causing some event missing. Or if PC system became busy will ignore some callings of the event callback function? That's two possible reason will affact the final result. I am not sure. Do you have any experience about this problem. Or do you have some better suggestion to get the pulse rising time. Thanks again.
Regards,
Yang

Will there be a solution for the dock stereo systems that do not charge?

I have the JBL Radial and it will not charge the 3G...Before I buy a new one is there a solution to this???

Good question for JBL.
If a product does not include the "made for iPhone" designation, no.
Some products that don't include this may work with the first generation iPhone but not with the iPhone 3G.

Request for the Mountain (MTN) Channel

I would suggest Verizon add the MTN channel to its channel lineup. MTN sports coverage would be something that military personnel in my area of the country (Northeast) would love to see on FIOS. COMCAST has already added this channel. Thanks.

Feel free to make suggestions over at our Idea Exchange where other members can see your ideas and vote to support what you want. Here is a link so you can post your ideas http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/idb-p/ideas
--James
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Video with stereo track and click track for live performance

Hello,
I have a video that was created in FCP sync'd with a stereo sound track and a click track. I need to play this video live (using projection) with the stereo track routed to the main outs and the click routed to the in-ear monitors for a performer to sync with. I have not done this before and am trying to wrap my brain around it. I'm also hoping to come up with the easiest and most reliable solution. As I understand it, this video will not be able to play back from a burned DVD, but rather will need to play back in Logic with 2 audio tracks (L/R) for the sound track and then 1 track for the click. These 3 tracks can then be routed to their required destinations from a soundcard or mixer.
Does this seem to be the best and most reliable method? I've only burned audio to video (never using a click) in FCP before and have always played back from a DVD. Now I have this live player/syncing component and am not sure of the best way to do it. I have some experience with Logic, but limited.
I really appreciate any suggestions/tips any one might have.
Thanks.

I've opened the movie (with stereo track) in QT Pro and then added the click - and now the 2 audio files are there, sync'd up.
When you say you opened the movie in QT Pro, I assume you mean the QT Pro version of Quicktime Player 7. So let's say you have the movie open in Quicktime Player 7, and you press ⌘J (Window > Show Movie Properties). And in the window that appears, hopefully you see several items listed, including Sound Track 1 and Sound Track 2. These are your two audio files, that are now part of the movie file. One of those files is your stereo soundtrack, and the other is your click. So let's assume that this is a total of 3 channels of sound (because I understand your click is mono).
Select Sound Track 1, and select the tab Audio Settings. Let's assume this is the stereo soundtrack. In the scrolling area at the bottom right of the window, under the heading Assignment, you should see Left and Right. Let's leave it that way.
Now select Sound Track 2. Under Assignment, there should be just one item listed (that is, there is only one channel in this Sound Track, if the click is mono). Under Assignment, it probably says Mono. Change that to Center.
Save the movie. We're done with Quicktime Player for now. Launch Audio MIDI Setup. It's here:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
I assume you have an audio interface connected that supports at least 3 channels. In AMS, find the window (or tab, depending on your OS version) for Audio Devices. Select your audio interface. Select the Output tab, and press the button Configure Speakers. In the window that appears, select Multichannel, and change the menu selection from Stereo to 5.1 Surround.
You will probably see that "left front," "right front," and "center" are assigned to outputs 1, 2 and 3, respectively, of your audio interface. If not, make it so, and press the button Apply.
Now when you play your movie, the stereo soundtrack will appear at outputs 1 and 2 of your audio interface, and the click will appear at output 3. Now you can cable your stereo mains to 1/2 and your in-ear monitors to 3.

Cloning a Track for the Opposite Stereo Channel

Similar Messages

Maybe you are looking for