Cloning a VM: vhdx same name

Hello. I've exported a VM from one Hyper-V and imported it to another. When doing so, I noticed the actual file name for the vhdx during the import process did not change. It stayed the same name as the original. I could change the
name in the Hyper-V manager, not a problem, but still does not change the actual file name for the vhdx. Is this normal? It certainly breaks the vhdx when you rename it. -Not good.
Thanks. -oMan
(Windows Server 2012 R2)

Export option mainly for keeping a copy of a VM so that in case if we need to restore, we should be able to re-use it. From my understanding, Cloning is slightly different from Export when it comes to Microsoft OS. This may be the reason why export keeps
the file names and other configurations intact while exporting the VM.
For your issue, Once the VM is imported back, before starting the VM - Rename the VHDX first through file explorer. Then you could change the Disk configuration on the VM and point the disk to the new one.
I know - its not something which we want ultimately - But you could use it as a workaround until we have another option.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Similar Messages

Cloning OS2 HDD to USB stick hangs at a file with the same name ???

Hi,
I'm dragging my MacIntosh HD icon to a large USB stick in order to clone it because I'm going to install OS X Tiger onty my iMac G3/400 DV SE. The copying initiates, it starts, and after a few hundreds of MB's a small window pops up with this remark (translated from Dutch) :
" The file XXXXX cannot be copied because another file with the same name exists already." The window has two buttons : STOP and Continue. No matter which button I click, the process stops and I'm left with a few hundred MB on my USB stick. Deleting the "double" file doesn't help because a few minutes later another one pops up.
How is this possible? The USB stick is completely empty! Can anybody tell me what's going on and how to stop this, otherwise I'll never be able to clone the HDD.
Thanks for your kind information,
Paul

It was a bug in Classic OS, which was manifest in certain circumstances. My workaround was, at that time, to isolate the rascal (was possible, like in your case), eliminate it, then add it later.
Such events may occurs with Mac OS X files too, I cannot figure out why. One or two apps in my software archive usually do that.
another workaround it to archive it (.zip now, .sit in classic Mac OS), check whether applicable.

Two AM's with the same name but different forms causes Deployment problems

Two Masters forms, DOC & PM are cloned except for the "where clause" in the View's query and the titles in their JSP's.
DOC workspace has a BC project and a BC4JSP Project. The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='DOCTOR'.
In Java Webserver :-
The JSP's are located in C:\source\Doctor\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\Doctor\pol_ValueSet\..
If I execute Doctor in JWS the records are getting filtered properly.
PM workspace has a BC project and a BC4JSP Project. Again The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='PAY_MODE'.
In Java Webserver :-
The JSP's are located in C:\source\PMode\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\PMode\pol_ValueSet\..
If I execute PM in JWS, the PM's JSP comes (the title is correct) but the records pertaining to DOC appears. I checked the View's xml file in C:\source\PMode\pol_ValueSet\ the "where clause" is correct. The xml & classes have the same name but their contents are different.
I want to know whether this problem is because both have the same name for the AM and the BC4JSP's property file.
Please clarify.

Deploying two app modules with the same name will definitely cause problems.
The JSPs use the information in the properties file to connect to the application module and get the data they need from the appropriate View Objects in those app modules. If you have two app modules with the same name, when a JSP tries to connect, it has no way of knowing which one of the app modules to connect to if they both have the same name.
You could:
1. Just use one application module that contains all the View Objects you need to access.
or
2. Rename one of the application modules or the package it is located in so the names are distinct. If you choose this method, you will also need to update the JSPs (specifically the 'registerApplicationFrompPopertyFile' method call), and your JSP project's appmodule property file.

Deploying EJBs with same name in different application jars on JBOSS

Hi,
We are attempting to deploy entity beans with the same name in 2 different EJB application jars on jboss 3.2.5. One bean is an extension of the other, so some of the DB columns they refer to are the same (they access different DB tables in different tablespaces). However, the field names corresponding to these DB columns in the beans themselves are different (i.e. DB column serviceid is associated with the field serviceid in one bean and service_id in the other).
We have altered jboss.xml for one of the EJB applications so that the jndi-name used to access that application's bean is different to the jndi-name used to access the entity bean in the other EJB jar.
However, when we attempt to deploy both jar files on the same jboss server, one of the applications deploys successfully and when we deploy the other, we get EJB spec violation errors, such as the following:
14:18:34,631 WARN [verifier] EJB spec violation:
Bean : CommunityAddress
Section: 10.6.2
Warning: The entity bean class must define a get accessor for each CMP field.
Info : Field: service_id
I'm presuming that this is because the bean which references the serviceid DB column with a field called serviceid is being mixed up with the other bean, which has a service_id field.
Can anyone tell me if there is anything else that is required to get entity beans/EJBs in different applications but with the same names (and some overlapping fields, etc) deployed successfully on the same jboss server apart from editing jboss.xml for one of the applications?
Is this a jbosscmp-jdbc.xml issue?
Any help much appreciated,
Maurice

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

Z_Copied_Std._SAP_Script delete & create with the same name?

Hi,
(All is in DEV ssytem only and I hv seen RSTXSCRP prog)
We hv copied(cloned) a Standard SAP Script (say, SD_INVOICE) into Custom_SD_INVOICE.
Now, for some reasons, again I hv to copy/clone the SD_INVOICE into Custom one, but, I must give the same name as Custom_SD_INVOICE!!
So, pls. let me know that, Is my below understanding is correct,
1) Delete the existing Custom_SD_INVOICE
2) Copy the Standard SAP Script SD_INVOICE into Custom_SD_INVOICE
Now, I can work on newely created Custom_SD_INVOICE
3) So, I guess, system will prompt me for a transport, while deleting the existing Custom_SD_INVOICE, so, then, What TYPE of transport is it? is it UNCLASSIFIED one?
4) Can I combine the both tasks (Deleting & Creating) in one transport?
Thank you

Hi,
1) Delete the existing Custom_SD_INVOICE
    Yes, delete existing script first. If your first TR is already released. you will have to create new TR (workbench request) to delete it.
2) Copy the Standard SAP Script SD_INVOICE into Custom_SD_INVOICE
Now, I can work on newely created Custom_SD_INVOICE
   Use same TR as above and create new scipt using standard script.
3) So, I guess, system will prompt me for a transport, while deleting the existing Custom_SD_INVOICE, so, then, What TYPE of transport is it? is it UNCLASSIFIED one?
    If your first TR is not released then you can use same TR to delete your custom script and to create new custom script.
Please let me know if you face any other issues.
Thanks,
Archana

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

How can I clean all data in a database but keep all datafile still same nam

hi,
How can I get a easy way to clean all data in a database but keep all datafiles still same name and location just like a new created database?
dbca has two choice: create templet without datafile or with all datafiles but not empty datafiles.
thanks

What version is your database? DBCA in 10gR2 allows you to create a template from an existing database using only the structure. From DBCA
From an existing database (structure only)
The template will contain structural information about the source database including database options, tablespaces, datafiles, and initialization parameters specified in the source database. User defined schemas and thier data will not be part of the created template.

Automation plugin: how to select a spot channel when 2 channels have the same name?

I have a CMYK document opened in photoshop. In "CHANNELS" panel, I just added 2 spot colors with the same name "Sport Color 1".
As I click any of the spot channel to select it, the "Listener" plugin will output some c++ code like below:
SPErr PlayeventSelect(/*your parameters go here*/void)
     PIActionDescriptor result = NULL;
     DescriptorTypeID runtimeKeyID;
     DescriptorTypeID runtimeTypeID;
     DescriptorTypeID runtimeObjID;
     DescriptorTypeID runtimeEnumID;
     DescriptorTypeID runtimeClassID;
     DescriptorTypeID runtimePropID;
     DescriptorTypeID runtimeUnitID;
     SPErr error = kSPNoError;
     // Move this to the top of the routine!
     PIActionDescriptor desc0000000000003980 = NULL;
     error = sPSActionDescriptor->Make(&desc0000000000003980);
     if (error) goto returnError;
          // Move this to the top of the routine!
          PIActionReference ref0000000000001A48 = NULL;
          error = sPSActionReference->Make(&ref0000000000001A48);
          if (error) goto returnError;
          error = sPSActionReference->PutName(ref0000000000001A48, classChannel, "Spot Color 1");
          if (error) goto returnError;
     error = sPSActionDescriptor->PutReference(desc0000000000003980, keyNull, ref0000000000001A48);
     if (error) goto returnError;
     error = sPSActionControl->Play(&result, eventSelect, desc0000000000003980, plugInDialogSilent);
     if (error) goto returnError;
returnError:
     if (result != NULL) sPSActionDescriptor->Free(result);
     if (desc0000000000003980 != NULL) sPSActionDescriptor->Free(desc0000000000003980);
     if (ref0000000000001A48 != NULL) sPSActionReference->Free(ref0000000000001A48);
     return error;
You can see "PutName" add the channel name "Spot Color 1" to reference, and I think it will not work correctly if I add such code to my project since PS cannot differentiate the 2 channels only by name. Can anyone tell me if there's any other method for selecting spot channel? Thanks in advance.

Hi
Here is the something from docs tht you may find usefull.
Tryusing index instead of name:
SPAPI OSErr(*
PutIndex )(PIActionReference ref, DescriptorClassIDdesiredClass, uint32 value)
Puts an index into a reference (formIndex) along with the desired class for the reference.
Unfortunately I dont have C++ here to try i just used definition from docs.
Hope that this help.
Regards,
Momir Zecevic
Ars Media
www.arsmedia.tv

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

   VALUES
    ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
      <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

Have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer.

I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

I tried to make another account on my school Macbook Pro, made the Admin, account with the same name as the one I was using, deleted it and then all my desktop data is gone.

So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

Cloning a VM: vhdx same name

Similar Messages

Maybe you are looking for