Cloning between 2 iMac G5's ?

I've got a 1.8 gHz iMac G5 running OS 10.4.10 in order that I can run some older statistics software that is not supported beyond 10.4.10. However, recent display problems (breakup, flickering) led to a visit to a cert. Apple tech who diagnosed failing logic board ($1300 to replace).
Now, I do have another g5 almost the same, but with a bigger hard drive. My time to spend on this is limited, but I thought the best way -- if possible -- is to wipe the hard drive on the second g5, start it up in firewire target disk mode, and simply finder copy all the files on the ailing g5's drive to the second g5's drive. This would save me installing all the software on the second machine.
But will it work? Will the second machine start up from the OS copied from the dying machine?
Advice appreciated!

If you don't need to clone it, but you just want the data, don't wipe the second G5, just try using Target Disk Mode and drag whatever you need over to it.
Both Carbon Copy Cloner and SuperDuper! allow you to use it without payment, although SD is limited, but it will clone to another machine.
Message was edited by: MGW

Similar Messages

  • After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad. I need help

    After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
    Please help!

    After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
    Please help!

  • I can't get a thunderbolt connection to work between my iMac and new macbook air

    I would like to establish a connection between my iMac and new macbook air using a thunderbolt connector. Nothing seems to happen when I plug the cable in to each device. When I open Settings/Network it shows up the Thunderbolt bridge as 'Not Connected' on the MacBook and as 'Some Connected' on the iMac. I have no problems with connecting another device (iPad) to the iMac. Can anyone help please?

    Nothing happens when I try to boot up using the command+R keys.
    Did you hold down those keys before booting and continue till you get to a selections window?  You should get this:
    If you can't boot into the Recovery volume make an appointment with the nearest Apple Genius bar for a diagnosis.  You're still under warranty. 

  • How do i set a peer to peer network between my iMac and windows machines?

    I want to set up a peer to peer network between my iMac and Windows based computers in my house.  I also want it to a wireless set up.  Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

    I'm trying to connect my MacBook Pro to Wifi using internet sharing
    Why?
    Just connect the MacBook to the same internet as your iMac.
    MacBook > Wi-Fi router > Internet.
    You are connected to the internet with your iMac.
    iMac > Wi-Fi router > Internet
    Why do you want to go MacBook (via Wi-Fi)  > iMac > Wi-Fi router > Internet?

  • How to share a HP Laserjet between a iMac and a PC Laptop

    I have been sharing a HP Laserjet 1200 between my iMac and a Toshiba Satellite laptop for years by using the USB port for the iMac, and using the parallel port for the PC. This has worked great for years. I've just purchased a new laptop, and it no longer has a parallel port. Is there a way for me to still connect the printer to both computers? I also have a Color LaserJet 2600n, does the 'n' means wireless? The 2600n is only connected to the iMac, being I don't use it much. Most of my printing comes off the Laserjet 1200, for both computers and would really like to keep it like that. I've also just purchased Snow Leopard for the iMac, just haven't gotten a chance to install it yet. Upgrading one machine at a time. First I need to print from both machines. Any help would be appreciate it! Thank you.

    Hi Barney,
    Finally got a chance to download Bonjour for Windows to my laptop late last night, and after a few tries (to get the correct driver for that old HP1200...), it worked! The original driver disc wouldn't work, guess it was just too old. But was able to get one from HP web site. Anyway, thank you so very much. Though I have to make sure the Mac is on when I want to print from the laptop, as the printers are on sharing, they're right next to each other and I tend to work off both at the same time anyway, so it's not a big deal. Sometimes over the weekend, I will play with the wires some more to do what you and Bruce suggested, and make sure the mac and the 2600 is connected via Ethernet, not USB. Right now the 1200 is connected directly to the Netgear, but doesn't seem to work as a server. Oh well. Again, thank you for your suggestions. It was of great help!

  • I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook.  Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

    I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook.  Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox? 
    Maybe I should just always export from Pages into Word  (and likewise for the other types) before I upload to Dropbox?  I hope not!!

    If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
    You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
    Peter

  • How do I sync contacts between my iMac and Nokia 5233? iSync doesn't seem to have an add-in for Nokia 5233.

    How do I sync contacts between my iMac (10.6.8) & Nokia 5233? iSync doesn't seem to have an add-in for Nokia 5233. Any other way? Appreciate any help on this.

    hayley7070 wrote:
    How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
    What instructions?
    In the source list click devices (so far so good) then click the entry for your iphone or ipod.  that doesn't exist. HELP asap
    You don't import photos from the iPhone to your computer using iTunes.
    See this -> iOS: Importing personal photos and videos from iOS devices to your computer
    Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

  • Is it possible to daisy chain a thunderbolt drive between 2 imacs?

    is it possible to daisy chain a thunderbolt drive between 2 imacs?

    You can connect two thunderbolt harddrives to one computer, but you cannot connect two computers to one harddrive.  That would result in a data signal conflict.
    Hope this helps

  • It appears that I can not share documents between my iMacs and mac air without first opening document in an IOS device.  Is this correct?  If so then iCloud for me is a giant step backward especially since idisk will be discontinued next year.

    It appears that I cannot share documents between my iMacs and and Mac air using icloud without first opening document in and IOS device.  Is this true.  If so, then icould is petty much worthless for me, especially since idisk will be discontinued next year.

    jack198 wrote:
    You are correct.  However, a document can not be opened by another computer unless the document has first been open by an iDevice.
    iwork on iOS uses different file formats ( *.tef ) then iwork09 on Mac ( *.key , *. number , *.page ).
    Uploaded documents to icloud.com must first be updated to the *.tef format and then re-written to the cloud system. The online service behind the iwork web-app does the re-conversion to Mac formats, pdf or Microsoft office. All that is happening "in the cloud", not on your Mac as he misses the engine to do the transcoding from the *.tef to the other formats. Mac simply does not know what *.tef is.

  • HT4783 Why can I not airdrop between my iMac and iPad Air?

    Is there a way to airdrop between my iMac and iPad Air?

    AirDrop uses different systems to transfer data in iDevices and Macs, so you cannot use AirDrop between an iPhone, iPod touch or iPad and a Mac. If you want this feature, send the idea to Apple > http://www.apple.com/feedback
    Instead, there are other ways to transfer data between the Mac and your iPad, like Dropbox, or use iTunes.

  • How can I synch Mail application between an iMac and a Macbook Pro

    I want to be able to go back and forth between my iMac and my Macbook Pro using Mail application.
    I don't want to set up two completely separate accounts.
    Has anyone had to do this and if so, how do I do it?
    Thanks for your help
    Ed

    You can get a Dropbox account, this will allow for 2GB of free storage and you can purchase additional storage if needed. You can find out about Dropbox from their website or read one of the many reviews about them. Their address is:
    www.dropbox.com
    and some reviews are at:
    http://www.onlinebackupsreview.com/dropbox.php
    http://www.onlinebackupdeals.com/dropbox/
    And you can Google to find additional reviews if you would like.
    Roger

  • Syncing Mail Between My iMac and Macbook

    I am new to the Mac world (I am a PC convert) and I now have an iMac and a Macbook for work.
    I have a couple of questions (some of which belong in this group and some elsewhere but I figured someone here could point me in the right direction):
    1. My company's email does not support IMAP, only POP. What is the best way to keep my email clients sync'ed? Ideally I would like my Inbox and all of my folders to be the same on my desktop and laptop and it would be great if it was automated somehow.
    2. What is the best way to handle my iPhone? Should I make my Macbook the "Sync Master" and only sync it to that?
    3. What is the best way to keep my folders and iTunes sync'ed between my iMac and Macbook? Someone suggested Martian Slingshot as the best way to keep them together. Do other people concur?
    Any other advice/experience that people may have on the easiest way to use a Desktop in the office and travel with a sync'ed laptop is appreciated.
    As I mentioned, I am very new to the Mac world. I can't really think of any great way to sync them in the PC World either but I am grateful for your help. I know I should have gotten a Macbook Pro but my boss didn't want to get me one so I am stuck with the hardware I have.
    Thanks.
    Jeremy

    What I've done with email in the past is set only one of the machines to delete email from the server (if your company allows you that option). But you need to make sure you check with the one that doesn't delete before the other. You may be able to delete manually as well, so don't delete anything from the server until mail has been downloaded to both (I think this can be done in Apple Mail under advanced prefs). But that won't help with tracking replies, etc. And you'll have to manage mailboxes seperately.
    .Mac has a bunch of syncing options, but you may not want to go to that expense.
    Sorry I don't have any advice on the other stuff, only running 1 Mac.

  • Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    ARD is totally unnecessary and inapplicable for your scenario. ARD is a Mac OS X application for managing other Macs and is not useful if you want to connect to a Mac from some other OS. Mac OS X has a VNC client build int, so VNC,  or one of the number of other remote control solutions - LogMeIn, for instance, if they offer a Linux version - is where you want to be looking.
    Regards.

  • I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

    hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

    You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
    You're not doing anything wrong - it just isn't a feature of iOS devices.
    What were you hoping a Bluetooth connection would allow you to do?

  • My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    There are several possible causes for this problem.
    1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
    2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
    4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    6. See also this support article.
    Rename the computer in the Sharing preference pane.

Maybe you are looking for

  • Any solutions to polygonal lasso tool that does not conform to selection?

    In PhotoShop, CS4, the polygonal lasso tool does not conform to the selection when it is closed but creates a curvy almost circle segment.

  • LiveCycle won't recognize correct password

    Hi all, I recently installed the full version of Adobe LiveCycle Designer ES4.  After using the trial version of the software for a while, I purchased and installed the full version.  Now when I try to open a password protected form, it does not open

  • Can I make a 5 Hour long DVD

    Hi everyone, I have a client who has already had 5 hours of video put onto a DVD he wants me to do the same. Can iDVD handle this??? I know iDVD usually has a time limit of 2 hours, but when I gave it a QT movie that was over 2 hours long it just ask

  • Plugging iPhone into PC turns PC off

    Every time I plug my iPhone into my PC it will not recognize the phone and will result in a shut down of the computer. Why is this happening?

  • Abap runtime error UNICODE_TYPES_NOT_CONVERTIBLE occured

    Hi,ecpert: I have encountered one abap runtime error UNICODE_TYPES_NOT_CONVERTIBLE and the main logic list below: First, I define one parameter which user can input from selection screen. PARAMETERS:P_TABNAM LIKE DD03L-TABNAME . Then, I get the dynam