Cloning from Windows NT to Windows 2003

I wish to upgrade the OS of our PROD and TEST Servers from Windows NT Server to a fresh install of Windows 2003 Server.
I have managed to complete this on our Development System by performing a clean install of Windows 2003 Server and then cloning our existing TEST Server. This seems to have worked.
Is this a valid and recognised method for upgrading binary compatible Operating Systems?

You will need to export your input level data, and recreate the cubes on the target system. You will NOT be able to copy the page and index files over to migrate your data. Here are some other things to consider:- Your application/database settings- Your security information (filters, groups, and users)- All your calc scripts, reports, etc...- Linked objectsBe sure to give yourself plenty of time with access to the old server before it gets wiped, with parrallel testing if possible.Good Luck,

Similar Messages

Running powershell cmdlets from windows 7 against windows 2003

what are the requirements for running PowerShell from windows 7 against windows 2003 server in a different domain?
dhomya

Hi Dhomya,
If you mean Powershell Remoting, and if the domains don't have trust relationship, you can configure the setting "WSMan:\localhost\Client\TrustedHosts".
To configure Powershell remoting, please also check this article:
[Forum FAQ] Introduce Windows Powershell Remoting
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

OS upgrade from windows 2000 to Windows 2003/ 2008

Hi friends,
We are planning to do an OS upgrade of our current production system from windows 2000 to Windows 2003/ 2008.
Can you please refer me to any existing document /Forum link which has a detailed strategy outlaying the activites to be performed for this.
Regards,
Rohit

Hello,
Just upgrading the OS to 2003 should be OK as 640 - 700 kernel is supported on Windows 2003
www.service.sap.com/pam
For 2008 minimum level is 700 SR3 best to do a system copy
SAP on Microsoft Windows:
SAP on Microsoft Windows
regards,
John Feely

Upgrade from Windows 2000 to Windows 2003

Dear all,
We are upgrading our CRM Sever from Versio 4.0 to CRM 5.0. Do we need to upgrade our Operating system from Windows 2000 to Windows 2003?
Kind regards,
Raquel Mendoza

Hi Eric,
I have checked the link. Does this mean that I need to upgrade my OS to WINDOWS SERVER 2003 64bit?
> Released for CRM Server Database Platforms SAP KERNEL 7.00 64-BIT MS SQL SERVER...
Released Database Version Operating System
MS SQL SERVER 2000 WINDOWS SERVER 2003/X64 64BIT
MS SQL SERVER 2000 IA64 WINDOWS SERVER 2003/IA64 64BIT
MS SQL SERVER 2005 IA64 WINDOWS SERVER 2003/IA64 64BIT
MS SQL SERVER 2005/X86_64 WINDOWS SERVER 2003/X64

Can we migrate SAP 40B release system from windows NT to windows 2003.

Hi,
We want to know can we migrate SAP 40B release system from windows NT to windows 2003 server; if yes, please share with us the OS migration document.
Regards,
R Mav

> Our SAP 4 O B is on windows NT and oracle version is 8.0.5 and wants to do OS migration from NT to win. 2003.
Neither Oracle 8.0 nor 8i were releases on Windows 2003, they won't work and are not released.
So I'm afraid the only way you can go is Windows 2000.
Markus

Migration from Windows Small Business Server 2003 to Snow Leopard Server

Hello,
I'm going to migrate a Windows Small Business Server 2003 Standard to a Mac Mini Snow Leopard Server 10.6.x in a few weeks.
I have 2 questions :
Is there an official process to migrate my Exchange server datas ?
Snow Leopard Server has it Wizards to help me to muigrate datas to proper services ?
Thanx
Regards,
Gil DERENNE aka --( dB )--

Thank you for your reply
My network will be Apple only in a few time (1 server, 1 iMac and 1 Mac Pro).
Now, I want to replace server and all services installed on it :
- Active Directory (replaced by Open Directory)
- Users/Groups/machines
- NAT/Firewall and Backup (will be replaced by a Time Capsule)
- VPN for mobile access
- File and Printer sharing
- Fax Services with Fax/Modem 56K !oops! (replaced by a free service offer by my ISP)
- Mail/Calendar/Address book and notes with Exchange (replaced by each service to serv right thing : Mail, iCal, Address book...).
I know what to do with all things but not for replacing Exchange and transfer datas to each similar service in Snow Leopard.
In the network, Mail Server will be used by Outlook with IMAP protocol and other services by web interface (Windows computers are not a problem for me, it can be alone and only access web if necessary).
The number of clients inside the LAN :
- 2 iPhones
- 1 iPod Touch
- 1 PC Windows Vista (for a few time) with some VM (Linux and Windows)
- 1 iMac 27' with 1 VM (Windows)
- 1 LAN Printer HP Deskjet 6127 (RJ45 Static IP connection)
The number of clients outside the LAN :
- 3 PC Windows XP
- 2 PC Windows Vista
- 5 Nokia Smart Phones
When I'm going to by the Mac Mini Server with Snow Leopard Server, is there some support to help me to do it whith them and is it free or do I have to buy AppleCare to access to this service ?

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

How can I connect 10.4 Mac to Windows Small Business Server 2003?

I have seen some other discussions touching on this topic and have tried the various solutions but am getting nowhere. I can't connect my iBook, which is running Tiger, to our office's server, a Windows Small Business Server 2003. I am the only Mac user and as a Mac devotee actually spent my own hard cash for the iBook. (I work for a non-profit with low funds.) Previously, when our office had a different server and I had Panther, I could access the server. Then it was purely an academic exercise, since I had no need to access the shared files. Now I have a project that requires this, and I am stumped. Our part-time IT consultant is also stumped. We have tried a lot of the suggestions from other posts, to no avail. I suggested to the IT guy that there could be a problem regarding the encryption of my password, and I think he tried that. We have tried various versions of the domain name. The server comes up in the list when I follow the "go--connect to server--browse" path, but we come up empty. We've gotten error message -36, a message that we are trying to connect an alias to something that can't be found, and a message that we don't have enough information to go any further (something like that). I am writing from my eMac at home, so I can't reconstruct the situation right now. I have found in my extensive internet search that Thursby has something called ADmitMac that is pretty expensive software ($119 for one person) that I could install on the iBook and could help me access the Windows Small Business Server 2003 without doing anything else to the server. Does anyone know if that would that work? Any suggestions would be so appreciated!
eMac and iBook Mac OS X (10.4.4)

I have specific errors listed below:
Actually, I have been encountering similar problems. I have an end user who wants to connect to an SBS 2003 server, and can not connect/use RWW because the Active X will not work, cannot use the VPN in PPTP mode because Windows 8 disallows the connection
("Error 942: The connection could not be established because the authentication method used by your connection profile is not permitted for use by an access policy configured on the RAS/VPN server."), and cannot use an L2TP VPN connection because it requires
a certificate "Error 766: A certificate could not be found. Connections that use the L2TP protocol over IPSEC require the installation of a machine certificate, also known as a computer certificate.". I attempted to utilize the SBS Connection Tool downloaded
from RWW, but it fails with a proxy error ("Unable to execute custom script (Configure proxy settings for IE). Required file could be missing." - likely due to the PPTP tunnel it tries to use). I went so far as to install the Enterprise CA on the server, installed
the Hotfix
(KB922706) so that the website could be accessed from Vista and above, and installed the requested certificate. The VPN fails to connect after
it times out and fails to negotiate a connection. This last one is "Error 789: L2TP connection attempt failed because the security layer
encountered a processing error during the initial negotiations with the remote computer."
I have screenshots to share if anyone cares to see. I really just get the feeling that Microsoft is trying to kill SBS 2003 by ingoring it into oblivion.
The VPN works fine with Windows 7 clients by the way.

Back to my Mac through Windows Small Business Server 2003

I have been able to use Back to my Mac from my work to access by home Mac. I have an airport extreme base station at my home. At work, I have Windows Small Business Server 2003 functioning as the firewall, DHCP router, basically everything. I cannot access my Mac at work from home. I figure something needs to be opened up in the Windows SBS box, but I can't figure what I need to do nor how to do it. Any ideas?

You don't need to do anything special on the SBS 2003. Simply create shares on the folders you want to access. Then on your Mac use the Network icon which will search your network for any shares (this is similar to the My Network Places in Windows). Once your Mac OS discovers the share and you double click on it, if you have any type of security (NTFS) permissions, Mac OS will prompt you to enter a username/password/domain and the ability to save the credentials.

Windows Small Business Server 2003 R2 support?

Does any one know if Oracle Application Server 10g Release 2 (10.1.2.0.2) can be installed on Windows Small Business Server 2003 R2?
Thanks.

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT2099?viewlocale=en_US
http://support.apple.com/kb/TS1693
http://www.apple.com/iphone/enterprise/
Hope these help.

Windows Small Business Server 2003 R2 ??

Hi,
I am trying to set up an exchange account on my iphone. My company is running "Windows Small Business Server 2003 R2"
What does R2 Stand for, and is it compatable with the iPhone?
I have managed to fully install the SSL certificate on my phone, yet it is still not working.
My Remote Web Workplace is http://office.companyname.net/
What would I enter into the server box?
Any help would be greatly appriciated!
Kind Regards
Tim

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT2099?viewlocale=en_US
http://support.apple.com/kb/TS1693
http://www.apple.com/iphone/enterprise/
Hope these help.

Db migration from Solaris 8i to windows 10g

There is requirement to move db from solaris8(dbversion8170 to window Server 2003 (10204 already installed)
DB is about 80gb big, what would be the best approach ?
I am thinking to create new db on windows, and export and import data.....any concerns/suggestion?
Source System
SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
Target System
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production

what are other options i can try ?I only mention this approach because you asked. I wouldn't recommend it as a general strategy. exp/imp is the most straight-forward.
We are in the process of migrating from 9.2.0.6 to 11.1.0.7 (11.2 is not an approved standard yet in our enterprise), moving from Solaris to Linux, and consolidating two related instances into one.
We had to handle some unique situations due to our consolidation, so we did a lot of the steps manually that exp/imp does for you. A side benefit of this extra work is the actual down time is can be less than exp/imp itself, and avoids the need to dump all the data to disk and read it all again. We have about 500GB to migrate. It is a lot more work than a simple exp/imp, and is probably not be worth the effort for a single 80GB instance.
Our steps (oversimplified, there are more details than this) :
Set up the new instance and configure storage
Create users and roles in new DB
export structure only (using 9i exp)
import structure only (using 11g imp), without indexes or constraints
copy data (insert /*+APPEND*/ into.. select * from ... over a database link)
create indexes and constraints
Handling LONG data, materialized views, interdependencies between schemas each presented their own special circumstances I had to deal with.
The other path to get from 8i to 10g (mentioned only for academic reasons) is do a series of upgrades-in-place to get from 8i to 10.2.0.4 then use cross-platform transportable tablespaces to go from Solaris to Windows.

PSUS4 and Windows 7 and Windows XP and Windows Server 2003

I have a small domain network with Windows Server 2003 , Windows 7 desktop, Windows XP desktop. I have an HP LaserJet P3005 printer. I need to be able to print to the HP printer from all of the computers (server, Win 7 and win XP). I have a PSUS4 print server. Is there a way to setup the PSUS4 so that my server, Win 7 and Win XP computers could print to the HP printer? For example, If I setup the Print Server on the XP computer with TCP/IP port, could I share it to the server and Windows 7 computers?

Do you have any router or switch?
Or all the computers are connected to windows server through a switch?
PSUS4 must be connected to the router or the DHCP server so that it will get IP address and all the computers will be able to print.

WIndows 7 and Windows 2008 authentication failed in Windows 2003 Domain

Hi,
We have Domain with Windows 2003 and recently Windows 2008 Doamin controllers also added.
We are facing authentication failure for Windows 7 and Windows 2008 Domain members when user is trying to login.
Schema Master is on Windows 2003 and remaining roles on Windows 2008 Domain controller.
Windows XP clients login is working fine.
Problem si for Windows 7 and Windows 2008 Domain members login.
Any hint/solution will be really great help.
Pls share if you have any solutions.
Regards:Mahesh

Hi,
I found some more details about issue
Below are the events getting generated. It looks like due to encryption mismatch with Windows 2003 Domain and Windows7 and Windows 2008 clients. However i am looking for solution if someone tested this case.
Event Type:        Error
Event Source:    KDC
Event Category:                None
Event ID:              26
Date:                     08/06/2014
Time:                     9:41:04 AM
User:                     N/A
Computer:          AAAAAA
Description:
While processing an AS request for target service krbtgt, the account ADDADA$ did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 2). The requested etypes were 17. The accounts
available etypes were 23 -133 -128 3 -140.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:        Error
Event Source:    Kerberos
Event Category:                None
Event ID:              4
Date:                     08/06/2014
Time:                     9:34:17 AM
User:                     N/A
Computer:          AAAAAA
Description:
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server ADADDFHDHDH$. The target name used was . This indicates that the password used to encrypt the kerberos service ticket is different than that on the
target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.COM), and the client realm.   Please contact your system administrator.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards:Mahesh

Slow connection from Windows 2008 to Windows XP with database 10.1.0.5

We have a server "Windows 2008 R2 x64"/"Windows 7 x64" with an instants client and when we want to connect to database version 10.1.0.5 that,
It's running in a server "Windows 2003 sp2", the connection is very slow, about 26 seconds but if we connect to this database from a server
"Windows XP sp3"/"Windows 2003 sp2" the connection is much faster, it's immediate.
The instants client of both servers are the same, they were installed several versions, like: 10.2.0.1, 10.2.0.5, 11.1.0.6, 11.2.0.1 and the results
were the same.
Could you help me?
Thanks

Can you pls re-phrase your question or elaborate a bit on the issue.

Migrate from aix 5 to windows

is it possible to migrate 11.5.10.2 from aix 5 to windows server 2003, if so can you provide a document id or good help
thnx

Please refer to:
migration erp system aix to windows
Re: migration erp system aix to windows

Cloning from Windows NT to Windows 2003

Similar Messages

Maybe you are looking for