Cloning HD for replacement

I'm replacing my 80GB with 320....can you direct me to some idiot-proof instructions for cloning the 80 gig, and then transferring onto the 320? I have FW external HD.
Help. Help.
Thanks.

This is what I use, Carbon Copy Cloner: http://www.bombich.com/
It's free (donationware). Download, run, clone, shutdown, swap-drives and boot.
It's always been pretty simple and reliable. Later versions allow you to exclude stuff you don't want to clone (should you wish).
Works with Firewire and USB drives.
Message was edited by: eyoungren

Similar Messages

Report for replacement stock to be recived from vendor

Hi
I HAVE ONE ISSUE ON ABOUT VENDOR REPLACEMENT STOCK REPORT
EX:.. i have done GR for material-A qty 100...and ihave done MIRO for this ..pur.order..
after 20 days i have return the materai-A ..qty 25..(without cancel the MIRO) with movement tuype 122..but this material should be return from vedor.(subsequent deliver).after some days or weeks ..( bcoz money has already paid to vendor)...like this we many materials ..
for this... i want report for replacement material will be recived from vendor
regards
sesidhar

Hi
already i have done MIRO..
then return to vendor qty 25..(through MIRO...w/o creadit memo
thne again recive the replacement material ..through MIGO (subsequent delivery)
in this case ..need to create credit memo..?
if yes.. pls...send me procedure.
regards
sesidhar

Iphone is dead, gone to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

iphone is dead, gone to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

You never used your iPhone?
You never logged into iTunes?
Your AppleID & Password for iCloud& iPhone should be the same AppleID &Password you used to log in here and post a message.
-> Find your Apple ID

Report for the cost for replacing the defective goods free of cost

hi guru's,
iam having the qury that iwant to create a report for the free of cost .For the senario that company wants the report for replacing the defective goods free of cost .pls help me out .IN SD module
Edited by: joe mm on May 13, 2008 3:35 PM

Dear joe
I am sure, for giving free of cost, you should be having different document types like sale order for free goods, billing with no value. So thru VF05, by selecting the billing document type, you can generate a report.
thanks
G. Lakshmipathi

My iphone 5 is not charging properly. Recently the USB cable was emitting sparks on connecting it to my laptop.This has resulted in physical damage of the wire. Is it still eligible for replacement since it is under 1 year warranty?

My iphone 5 is not charging properly. Recently the USB cable was emitting sparks on connecting it to my laptop.This has resulted in physical damage of the wire. Is it still eligible for replacement since it is under 1 year warranty?

Why not. The iPhone was also delivered with a charger to connect to the wall outlet, use it

What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?

I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
So here are my questions:
1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
2) Will the front panel (or the software) tell me which hard drive has failed?
3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
Solved!
Go to Solution.

Hi exceptionalht,
It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
The front panel should show which drive has failed. If not you can check the web interface to find out.
That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

How to View Pending List for Replacement Subsequent Order

Hi Guru's,
Can any one tell me how we will able to findout the list of Pending order for Replacement.
If we will book a Return & do the delivery. After delivery we have Release the Sales Return order by VKM3. Then how we will found the list of released by VKM3 Sales Return Orders for Replacement. I m awaiting for Reply.
thanks & Regards,
Naveen Bhatia

Hi,
VL06 LIST OF OUTBOUND DELIVERIES
BR
Diwakar
reward if useful

Script for replacing Image from a frame into InDesign document file

Hi All,
I am having an indesign document (indd) file with images and texts. I am using InDesign Server CS4 to run the scripts via SOAP.
My requirement is to replace any of the images from the required frame/s of indesign document through scripting (I already have frame id of which image needs to be replaced). I have written written java-script file (as given below): but when I execute this java-script on InDesign Server via SOAP, I get follwoing error into InDesign Server:
10/03/09 15:15:54 INFO [javascript] Executing File: \\Server_IP_Address\JavaScript_File_Path\JavaScript_File.js
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/help.gif
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Water%20lilies.jpg
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Winter.jpg
Following is the java-script that is being used for replacing image from indd's frame:
var myDocument = app.open(File('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd'));
var tmp_frmid="1339"; //frame id of which image needs to be replaced.
for (var i=0;i<myDocument.pages.length;i++)
var objPage=myDocument.pages.item(i);
var objPageitems = objPage.pageItems;
try
var obj = objPageitems.itemByID(tmp_frmid);
obj.images[0].remove;
obj.appliedObjectStyle = null;
var myImage=obj.place(File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg'));
var old_height = myImage.geometricBounds[2] - myImage.geometricBounds[0];
var new_height = obj.geometricBounds[2] - obj.geometricBounds[0];
var old_width = myImage.geometricBounds[3] - myImage.geometricBounds[1];
var new_width = obj.geometricBounds[1] + ((new_height / old_height) * old_width);
myImage.geometricBounds = [obj.geometricBounds[0] + "mm", obj.geometricBounds[1] + "mm", obj.geometricBounds[2] + "mm", new_width + "mm"];
var diff = obj.geometricBounds[1] - myImage.geometricBounds[1];
myImage.move( undefined, [diff,0] );
break;
catch(e)
myDocument.save('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd');
var previewFile = File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg');
app.jpegExportPreferences.jpegQuality["JPEGOptionsQuality.low"];
app.documents.item(0).exportFile(ExportFormat.jpg, previewFile);
myDocument.close();
I have very urgent requirement; if anyone have any idea; please suggest me. \
It would be highly appreciable.
Kind Regards,
Prashant.

http://www.automatication.com/selection-to-pdf-script.html
Harbs
http://www.in-tools.com

Mapping Help for replacing source value

Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM    Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridhar

Hi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
   return "03";
else if(Addr_Type.equals("MAIL"))
   return "05";
else
   return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma

I sent my ipod nano for replacement but haven't had confirmation they have received it - how do i contact them?

Ten days ago i sent my ipod Nano for replacement (using the packaging Apple sent to me). Since then i have checked the progress online and all it shows is that they sent me the packaging, but not that they had received the ipod. I need to email or phone them, but can't seem to find either one. Is anyone able to help me?

You can track it on the carriers site - if you have a copy of the tracking label.
Depending on where it is going - if it is going by UPS - it may be held up due to Weather in Tennessee.
Anyway - the tracking will show when it was picked up, dropped off, and where it is sitting.

'Authorization for replace' sy002

SAP System gives me this error in debbuging mode. I suppose it is something related to authorization when modifying the content of variables (which is what I was doing).
What would be the problem ?
Thanks in advance.

> The message is 'No authorization for replace' - message type sy002.
I am not logged on and still dont know which program you are debugging... The system might be throwing an error message which does not relate to the real cause. Unlikely... Most likely an authorizations issue. If I may be honest with you (no offense!) if you do not know which object controls debugging and what it does to a SAP system..., then I would personally not give you debug authority in a system (I also do not have any debug authority - it was removed from my roles at my request). Only in some lab systems... (an one or two temporary exceptions).
> The change mode is not activated however I am supposed to be able to debug a program in Test System even changing the value of a specific variable defined in the program. In fact, I am allowed to debug the program but I can not change the value of a variable in debugging mode. (Perhaps it is because of the change mode status). That's why the system is showing me the error.
So you cannot activate the change mode? Are you setting a break-point, a watch-point or are you running a it from the start in the debugger? Are you executing it in the debugger from the tcode, or from Se38 etc? It the "productive" test client, the system might also react differently (which release are you on and which SCC4 settings does that client have?).
> Is it possible to change the authorization without having to make any more changes in the System?
Don't do that. I would reject the development and ask the developer to join you for the debugging session to see why those variables are incorrect. Your debugging mthod (or mode) may be incorrect (likely), or, the developer will have to go back to the drawing board in a development system or sandbox (sort of equaly likely, depending on the developer).
> The change mode can not be activated instead I want to grant access in order to be able to change the value of some varibles defined to see the results given.
See above. Besides that, the developer should ideally have handled those exceptions so that you do not get an incorrect variable; you only get an incorrect output in display mode (and send their code back for a rework, or invite them over...).
Hope that helps, sorry for the many questions...
Julius

I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

Since it is only the headset that is the problem and not the iPhone it would be better to just buy a new set and not let yourself be frustrated over it. If you send anything to your sister before the one-year warranty is over, include the headset so she can exchange it at an Apple store.

Shortcut Method for Replace Pages dialog box

What is the keyboard shortcut method for bringing up the Replaces Pages dialog box. I use Replace Pages function a lot in preparing PDF documents and need a faster method than using Mouse on Tools right sidebar. I note that shortcut key for inserting pages is Cntrl-Shift-I -- what is shortcut for Replace Pages. In previous Acrobat 9, I could use alt-DNR, which brought up Replaces Pages dialog box via the menu, but there no longer is a Document item in the menu bar -- it has been removed. Please, this is VERY important to me. Any help will be greatly appreciated.

Thank you for your quick reply. You have confirmed my worst fear. But anyway -- going forward ..... in your opinion, what is the best way to get information to Adobe on ideas for improvement so that future version or maybe even an update for this version could have something like what I need, that is, shortcut key for Replace Pages -- or ability to access customized quick tools via keyboard, etc. Is there someone keeping a list of these things that I can write to? Thanks again. (And don't worry, I won't extend this discussion past your hoped-for reply.)

UDF for replacing special or junk characters

Hi
Is there any stanard function for replacing any junk characters with zero? If not, I needed UDF for fulfilling this requirement.
My requirment is .... Am sending some files to r/3 using XI. In the source(txt file) some time some fields have some junk characters. I must make it to zero, the field which has junk. How can I acheive it? is there any UDF using which I can fulfill my requiremnt.
Thanks.

Hi,
Use this UDF
Here a is the input value.
String b = "";
b = a.replaceAll(",", "0");
b = a.replaceAll("@", "0");
Like all the special characters you can take and replace with zero.
return b;
Or
Use the regular expression to check whether special characters occurs in the string then replace with zero
http://www.j2ee.me/developer/technicalArticles/releases/1.4regex/
Regards
Ramesh.

Cloning DC for DR

Consider the following AD structure
Domain A
Domain B
Domain C - (Child of Domain B)
Domain A is trusting Domain C . i.e. users in C can log in to A.
DCs of Domain A and Domain C is spread across geographically. But the FSMO role for Domain A,B and C are held by respective DCs in HQ.
In one of the remote branch, we have DCs for Domain A and Domain C. We have one application in that branch which uses AD for authentication and users and Domain A and Domain C can log in to that application. The Application servers are in Domain A but allows
users in Domain C to log in by virtue of Trust.
Admin in that branch is creating DR for the application. So he clones the DCs for Domain A and Domain C along with the application servers and restoring it on another location. The reason for cloning DC is that , he wants the authentication
to happen only with in the DR bubble and don't want to traverse the WAN for authentication. The DR bubble is isolated from the network. The cloned DC for Domain A is authenticating in the DR bubble, but when trying to log in with Domain
C credential, the log in fails with No DC available for authentication error.
We have cleaned up DC in Domain A in bubble and removed all the reference of other DCs and seized FSMO roles. User can log in with their Domain A credential in to the application in the bubble, but not with Domain C credential. We
are able to log in to the DC of Domain C with Domain Admin account , but it is not allowing to open up dsa.msc or AD trust console, with the error that no DCs are available for authentication.
Wanted check whether this set up is viable? Will the trust between Domain A and Domain C will work in DR bubble with out communication with Parent Domain B? Can the authentication work with in the bubble without the need to reach out to other DCs in
HQ.
Thanks in advance!
Regards

Your best option is an authoritative restore using the D4/D2 method.
And I didn't realize this is a 2012 environment with a 2012 hypervisor or any hypervisor that recognizes the new VM-Generation ID attribute.
I think what you did was an export/import. The hypervisor will recognize the attribute and do its thing for you, as you've seen.
What you can do to prevent that is do a simple flat file copy of the VHDX and other files to your bubble environment, create a new VM from existing files, etc, etc, which should prevent the attribute mechanisms from kicking in.
More info:
Cases where VM-GenerationID doesn’t help make Active Directory virtualization-safe, Part 1
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2013/08/28/cases-where-vm-generationid-doesn-t-help-make-active-directory-virtualization-safe-part-1.aspx
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Cloning HD for replacement

Similar Messages

Maybe you are looking for