Cloning the asm configured database

Hi all DBA Guys, Have a Nice Day For all
How to cloning the asm configured database?
Regards
S.Azar

Hi,
How to cloning the asm configured database?
The same way which you going to use for without ASM instance.
Nice day to you too. :)

Similar Messages

Oracle Apps 11i Cloning with +ASM 10g Database

Hi,
Can somebody help Apps cloning on the issue facing. Please provide in detailed process Apps Cloning with +ASM.
Trying to Clone 11i Apps environment(11.5.10.2) and Db 10.2.0.4. The database is on +ASM.
1. Copied all the application files from SOURCE to TARGET ( source and target are different servers)
2. Database restored from source and the TARGET database is up and running( Database servers TARGET and SOURCE are 2 different servers.
3. As per doc id 230672.1 , preclone was successful in apps and db servers.
ISSUE:
=====
As per doc id 230672.1 , if we run adcfgclone on database server that messedup the database which is running already on the TARGET server, because adcfgclone recreate control files and all which is already intact for us in +ASM.
Question:
======
1. do we still need to do anything on the TARGER database server? if need to run , please provide the detailed steps
2. Do we need to run adcfgclone on apps server? please provide the detailed steps.
Thank You,
Dheeru.

Yes, restored and the database is up and running.
Then i ran adcfgclone dbtier on database which messedup whole database. Deleted all the file in ASM disk groups and try to restore the database threw RMAN.
Got new error, Please see below.
In the first run previously i got same error but fixed by creating control_files='+LASR','+FLASH' in pfile, again it's giving same error.
Also pasting PFILE.
Any idea on this.
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Jan 5 17:15:12 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: LASRT (DBID=1482364021)
connected to auxiliary database: LASRX (not mounted)
RMAN>
RMAN> 2> 3> 4> 5> 6> 7> 8> 9>
executing command: SET until clause
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=872 devtype=DISK
allocated channel: aux2
channel aux2: sid=871 devtype=DISK
Starting Duplicate Db at 05-JAN-11
contents of Memory Script:
set until scn 11188183994442;
set newname for clone datafile 1 to new;
set newname for clone datafile 2 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 4 to new;
set newname for clone datafile 5 to new;
set newname for clone datafile 6 to new;
set newname for clone datafile 7 to new;
set newname for clone datafile 25 to new;
set newname for clone datafile 26 to new;
set newname for clone datafile 38 to new;
set newname for clone datafile 43 to new;
set newname for clone datafile 44 to new;
set newname for clone datafile 45 to new;
set newname for clone datafile 46 to new;
set newname for clone datafile 47 to new;
set newname for clone datafile 48 to new;
set newname for clone datafile 49 to new;
set newname for clone datafile 50 to new;
set newname for clone datafile 51 to new;
set newname for clone datafile 52 to new;
set newname for clone datafile 53 to new;
set newname for clone datafile 54 to new;
set newname for clone datafile 55 to new;
set newname for clone datafile 56 to new;
set newname for clone datafile 57 to new;
set newname for clone datafile 58 to new;
set newname for clone datafile 59 to new;
set newname for clone datafile 60 to new;
set newname for clone datafile 61 to new;
set newname for clone datafile 62 to new;
set newname for clone datafile 63 to new;
set newname for clone datafile 64 to new;
set newname for clone datafile 65 to new;
set newname for clone datafile 66 to new;
set newname for clone datafile 67 to new;
set newname for clone datafile 68 to new;
set newname for clone datafile 69 to new;
set newname for clone datafile 70 to new;
set newname for clone datafile 71 to new;
set newname for clone datafile 72 to new;
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 05-JAN-11
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00003 to +LASR
restoring datafile 00004 to +LASR
restoring datafile 00006 to +LASR
restoring datafile 00007 to +LASR
restoring datafile 00025 to +LASR
restoring datafile 00045 to +LASR
restoring datafile 00046 to +LASR
restoring datafile 00049 to +LASR
restoring datafile 00051 to +LASR
restoring datafile 00053 to +LASR
restoring datafile 00054 to +LASR
restoring datafile 00058 to +LASR
restoring datafile 00060 to +LASR
restoring datafile 00062 to +LASR
restoring datafile 00064 to +LASR
restoring datafile 00066 to +LASR
restoring datafile 00068 to +LASR
restoring datafile 00070 to +LASR
restoring datafile 00071 to +LASR
restoring datafile 00072 to +LASR
channel aux2: reading from backup piece /ora_export/lasrx/15m16kuo_1_1
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +LASR
restoring datafile 00002 to +LASR
restoring datafile 00005 to +LASR
restoring datafile 00026 to +LASR
restoring datafile 00038 to +LASR
restoring datafile 00043 to +LASR
restoring datafile 00044 to +LASR
restoring datafile 00047 to +LASR
restoring datafile 00048 to +LASR
restoring datafile 00050 to +LASR
restoring datafile 00052 to +LASR
restoring datafile 00055 to +LASR
restoring datafile 00056 to +LASR
restoring datafile 00057 to +LASR
restoring datafile 00059 to +LASR
restoring datafile 00061 to +LASR
restoring datafile 00063 to +LASR
restoring datafile 00065 to +LASR
restoring datafile 00067 to +LASR
restoring datafile 00069 to +LASR
channel aux1: reading from backup piece /ora_export/lasrx/16m16kuo_1_1
channel aux1: restored backup piece 1
piece handle=/ora_export/lasrx/16m16kuo_1_1 tag=TAG20110103T144231
channel aux1: restore complete, elapsed time: 00:18:55
channel aux2: restored backup piece 1
piece handle=/ora_export/lasrx/15m16kuo_1_1 tag=TAG20110103T144231
channel aux2: restore complete, elapsed time: 00:21:20
Finished restore at 05-JAN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "LASRX" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 72
MAXINSTANCES 1
MAXLOGHISTORY 7303
LOGFILE
GROUP 1 SIZE 20 M ,
GROUP 2 SIZE 20 M ,
GROUP 3 SIZE 20 M
DATAFILE
'+LASR/lasrx/datafile/system.331.739646133'
CHARACTER SET WE8ISO8859P1
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/05/2011 17:36:50
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01276: Cannot add file +LASR/lasrx/controlfile/current.332.739640887. File has an Oracle Managed Files file name.
=======================================================================
PFILE
====
*.aq_tm_processes=2
*.audit_file_dest='/10g/app/oracle/admin/lasrx/adump'
*.background_dump_dest='/10g/app/oracle/admin/lasrx/bdump'
*.compatible='10.2.0'
*.core_dump_dest='/10g/app/oracle/admin/lasrx/cdump'
*.control_files='+LASR','+FLASH'
*.db_block_size=8192
*.db_cache_size=318767104
*.db_create_file_dest='+LASR'
*.db_domain=''
*.db_file_multiblock_read_count=8
*.db_files=500
*.db_name='LASRX'
*.db_recovery_file_dest='+FLASH'
*.db_recovery_file_dest_size=5120M
*.dml_locks=5000
*.job_queue_processes=0
*.local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=hct431oractd002.mfia.state.mi.us)(PORT=1524))'
*.log_archive_dest_1='LOCATION=+FLASH/LASRX'
*.log_archive_format='%t_%s_%r.arc'
*.log_buffer=30551040
*.log_checkpoint_interval=100000
*.log_checkpoint_timeout=72000
*.log_checkpoints_to_alert=TRUE
*.max_dump_file_size='20480'
*.nls_comp='binary'
*.nls_date_format='DD-MON-RR'
*.nls_language='american'
*.nls_length_semantics='BYTE'
*.nls_numeric_characters='.,'
*.nls_sort='binary'
*.nls_territory='america'
*.O7_DICTIONARY_ACCESSIBILITY=FALSE
*.open_cursors=500
*.open_links=20
*.parallel_max_servers=12
*.parallel_min_servers=0
*.pga_aggregate_target=681574400
*.processes=800
*.query_rewrite_enabled='TRUE'
*.remote_login_passwordfile='EXCLUSIVE'
*.resource_manager_plan=''
*.session_cached_cursors=100
=============================

The ASM configuration

dear team,
i have been working on migrating my DB to ASM and while i was configuring ASM i got the following issues.
1- when i have to prepair the disk i used fdisk tool to make the filesystem table and then save the configuration for each disk. "do i have to use mkfs tool after that"
2- after that i used the command "oracleasm createdisk" to create the ASM disk but when using the DBCA to configure ASM the names of the disks i created using "oracleasm createdisk" wasn't available instead the original disk names were there. (so the question here is what is the difference between using the oracleasm createdisk and creating disk group using DBCA)
3- for the DBCA to be able to see the disks, i have to change the permission of the disk to 666 using chmod command.. but when i restart the system, these permission just return back to the old value(NOT 666) nwhich makes it impossible to start the ASM instance.
4-Do i have to use scsi disks for ASM or i can use IDE disks too. if yes please tell me how...
thank u in advance.

Overwrite the first several MB of the partition with /dev/zero.
So, use this command:
# dd if=/dev/zero of=/dev/rdsk/c1t3d0s7 bs=1024k count=10
That clears out the ASM header on the disk so that it looks like a clean disk again.
-- John

ASM Configurations

Hi,
I am new to configuring ASM,
Can you tell me how to start from scratch like what kind of disks required. which raid level should be configured, which one is the task of sysadmin and which tasks will be performed by dba?
My operating system is solaris 9 x86 and database would be 10gR2.
We are going to deploy data warehouse environment.
alomost 100gb RAM is available (expectedly from 80gb to100gb ram).
please help me understanding the ASM configuration and disks knowledge along with RAID levels.
Note: we have 600GB hard disk (6 disks 100gb each).
Thanks all........
Message was edited by:
Fkhalid

Have a lok at ASM Best Practice Documents
www.oracle.com/technology/products/database/asm
www.oracle.com/technology/products/database/asm/pdf/asm_10gr2_bptwp_sept05.pdf
www.oracle.com/technology/products/database/asm/pdf/asm_bestpractices_9_7.pdf

Move datafile from asm datafile database to non asm database

Hi Nice morning all DBA Guys, I want move datafile from asm database datafile to non asm configurated database. Hoe to move this?
Datafiles like this
+DATA/saico/datafile/users.259.631612183
+DATA/saico/datafile/DBA.XXX.XXXXXXXXX
Regards
S.Azar

The all files movement of asm to non-asm and vice-versa is given in document id 252219.1 on metalink. Please look at the same. In nut shell you have to do the following:
1. Start your database with ASM.
2. Create pfile from spfile.
3. Edit pfile to reflect controlfile name in file system location.
4. SQL> Startup nomount.
5. Use RMAN to copy the control file from ASM to NON-ASM.
RMAN> RESTORE CONTROLFILE FROM '<filename_of_old_control_file>';
6. SQL> alter database mount;
7. Use RMAN to copy the database from ASM to NON-ASM.
RMAN> BACKUP AS COPY DATABASE format '/u01/oradata/nonasmdb/datafile/%U';
8. From RMAN
RMAN> SWITCH DATABASE TO COPY;
Regards.

DBUA Failed at "Configuring Database with Enterprise Manager"

Hi All,
We upgraded our production database and we have configured OEM in that, while upgrading from 10.2.0.3 to 10.2.0.5, it failed at the stage "Configuring Database with Enterprise Manager". Could anyone suggest how to upgrad OEM to 10.2.0.5.

I don't think you will find logging regarding failed jobs on the system. But you can create a "view only" user, see MOS: How To Create Administrator Accounts (Super Admin, Admin, View Only, etc) In Grid Control [ID 377310.1]
Eric

DBCA - "Configure Database Options" is diabled

Hi,
I installed Oracle Database 10.2.0.4 without Oracle JVM. Now I want to add Oracle JVM.
However when I run dbca the option "Configure Database Option" is disabled. What can I do to enable it?
I read in Oracle doc http://download.oracle.com/docs/cd/B19306_01/java.102/b14187/chfour.htm#BABGAHEE the following:
If you have already installed Oracle Database without Oracle JVM, then you can add Java to your database through the modify mode of the Database Configuration Assistant of Oracle Database 10g. The modify mode enables you to choose the features, such as Oracle JVM, that you would like to install on top of an existing Oracle Database instance.and I'm trying now to do that. Is "Configure Database Option" what I need or it is something else?
OS: Solaris 10 x86

The issue is resolved. I just have forgotten to add an entry for my database to oratab file. Now the option is enabled in dbca.

Configured database is not compatible

When I try to open the inventory I get the error, configured database is
not compatible, trying to access a later version of the database. I have
the database configured for Sybase, which is suppossed to be the
default. However, I don't see a sybase database running on the server, I
do see a my sql database running on the server. Any ideas what to do
next? Thanks.

When in ConsoleOne I go to Tools>ZenWorks Inventory>Configure DB it tells
me the database is configured successfully. I checked the policys and
they seem to be setup correctly. When I try to do an Inventory Query, or
any othe data retrieval, I get the error:
The configured database is not a compatible database.
You are trying to access the later version of the ZenWorks database.
To me, it sounds like the ZenWorks engine and the Sybase database on the
server, are not the same or compatible. How do I check this and correct
this?
Thanks.
>
On Fri, 21 Jul 2006 12:47:48 GMT, [email protected] wrote:
>
> > Do I need to start it somehow? This is my
> > first time trying to use zenworks inventory and the instructions are
not
> > very good.
>
> if it is installed you can start it with mgmtdbs, but you will also
need to
> configure the policies correctly
> --
>
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-
mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Silent install- ASM Configuration Assistant fails

I am trying to do a silent install with response file. At the end of the install it says I need to run configToolAllCommands which I do but the ASM Configuration assistant fails. I assume I need to pass in asmsnmp password but how do I do that? I see I can specify ResponseFile=<fn> when I run configToolAllCommands but how do I set the asm passwords in a response file? I tried just creating a response file that included asmsnmpPassword=mypassword and sysAsmPassword=mypassword but it didn't like that. Anyone know how to pass in the password? I think it will set up the asmsnmp user in this configuration assistant? because that is one of my problems after the install completes I don't have that user set up. I need all of this to be automated.
thanks for any ideas.

well I did not find any documentation on how to create a resposne file for the ConfigToolAllCommands- all I found using the -help option was that I could include a ResponseFile=<fn> parameter. so all I did was put 2 llines in the file sysAsmPassword=mypassword and asmsnmpPassword=pAssword. And that doesn't work...

Cloning the Oracle Database Server which has Grid 11.2.03 and DB 11.2.0.3

Hi DBA's,
Did anybody came across cloning a database servers? If i have the OFA for Grid and DB homes i.e /u01/app/oracle so after clone it will be the same across all servers. So the inventory structure will be same also. After cloning changing the listener.ora files to point to new IP/Hostname can bring up the listener. What else? Did anybody tried this things and what all issues have come or what all issues could come.
Thanks,
Bhushan Altekar

Ok. I got the cloned VM . I did the same steps as we use for normal grid and db cloning. Below are the steps i did.
1) change the ip address
2) reboot
3) after reboot wait for few minutes till the ASM comes up automatically
4) as root run the below command
/u01/app/oracle/product/11203/grid/crs/install/roothas.pl -deconfig –force
5) Change the hostname with system-config-network-tui - Edit DNS Configuration and change the hostname here
6) Edit the /etc/hosts file and enter the ip address and the hostname
7)Reboot
8) After the reboot as root run the command
/u01/app/oracle/product/11203/grid/root.sh
================================
#output of step 8
[root@cat ~]# /u01/app/oracle/product/11203/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/11203/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/oracle/product/11203/grid/crs/install/crsconfig_params
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'dba'..
Operation successful.
LOCAL ONLY MODE
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4664: Node cat successfully pinned.
Adding Clusterware entries to inittab
cat 2012/08/23 13:14:02 /u01/app/oracle/product/11203/grid/cdata/cat/backup_20120823_131402.olr
Successfully configured Oracle Grid Infrastructure for a Standalone Serveror a Standalone Server
===============================
9) stop the HAS service
crsctl stop has
10) Add the listener
srvctl add listener
11) Add the asm instance as new cloned grid don’t know about it. So we have to add it and see its added or not.
12) srvctl add asm -d '/dev/oracleasm/disks/*' # Note here if you specify wrong diskstring. Your Oracle restart stack wont come up automatically after reboot. so please specify it correctly.
13) crsctl status res # check all the resources are added or not
14) edit the listener.ora file and change the hostname ( HOST = XXXX part of the file)
15) crsctl enable has
Congrats we have successfully cloned the database server itself.
Please check the steps i did. And add if you think it should be added and taken care of.
Thanks,
Bhushan Altekar
Edited by: user13368428 on Aug 23, 2012 3:13 PM
Edited by: user13368428 on Aug 31, 2012 4:58 PM

Database is not created on ASM configured Disks

hi,
I have installed Oracle 11gR2 Grid Infrastructure and Automatic Storage Management for a Standalone Server through "Grid" user. After then I install Oracle Database 11gR1 Software through "Oracle" User. There is no problem occure during the installation of these software. The OS is OEL-5.4. AND
ASM configured Disks are "DISK1, DISK2 AND DISK3" and the Group Name is "+DATA".
The Problem is when i want to create Database and chose ASM configured disk for Database storage, at the database creation process on 27% an error occur that is "ORA-03114 Not connected to Oracle". Sir but when i chose File System for Database Storage, Database created successfully.
Sir i am new in Oracle Grid Infrastructure and ASM please help me.

Hi buddy,
Are there errors in the alert.log of RDBMS istance, and what about traces ? Have it been generated ?
Regards,
Cerreia

How to configure automatical startup of both ASM and Database

I created a ASM and a database that uses this ASM for file storage management. I also edit the /etc/oratab file as followings:
+ASM:/u01/app/oracle/product/10.2.0/asm:Y
orcl:/u01/app/oracle/product/10.2.0/db_1:Y
However, when I reboot the system, both ASM and database instances cannot be started up automatically.
How can I configure automatical startup of both ASM and Database at system reboot?
Thanks in advance!

try the following
Create file called startdb.sh in $ORACLE_HOME/bin and put following line into startdb.sh and
change the permission of the file with following command.
$vi $ORACLE_HOME/bin/startdb.sh
su - oracle -c 'sh /oracle/product/10.2.0/db_1/bin/dbstart'
Please replace /oracle/product/10.2.0/db_1/ with your ORACLE_HOME
$chmod 777 $ORACLE_HOME/bin/startdb.sh
Open /etc/inittab file and append following two lines in /etc/inittab.
h2:35:once:/etc/init.d/init.cssd start >/dev/null 2>&1 </dev/null
h3:35:wait:/oracle/product/10.2.0/db_1/bin/startdb.sh >/tmp/stdb.out 2>&1
If you have h2,h3 in the inittab file please feel free to change it to h4,h5 or whatever is unique, but it has to be unique name
Please replace /oracle/product/10.2.0/db_1/ with your ORACLE_HOME.
Reboot machine and check out whether both instances are getting started or not.Please check $ORACLE_HOME/startup.log for more information.
rgds
alan

SharePoint 2007:Cannot connect to the configuration database.

The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors：
Log Name:      Application
Source:        Office Server Search
Date:          2015/2/28 22:30:47
Event ID:      10034
Task Category: Gatherer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Office Server Search" />
    <EventID Qualifiers="49152">10034</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
    <EventRecordID>2323514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name:      Application
Log Name:      Application
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:30:50
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="0">5586</EventID>
    <Level>2</Level>
    <Task>484</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
    <EventRecordID>2323517</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>64</Data>
    <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:31:00
Event ID:      27745
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="14130">27745</EventID>
    <Level>2</Level>
    <Task>1105</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
    <EventRecordID>2323520</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C)                   0x08FC Search Server Common
GathererSql                   0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          UtilCommon
0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to reuse the same disk (partition) for next ASM configuration?

Hello All,
I had successfully installed and configured ASM instance once, but I need to do a reinstallation and I would like to use the same disk (partition) as with previous ASM configuration.
The disk path used was: /dev/rdsk/c1t3d0s7
I have to regretfully admit that I may not have used the right ASM un-installation procedure. I ran installer and opted to de-install products. Consequently, I had removed ASM home. Now, when I running new ASM installation, everything goes fine until the screen where I should select disks for ASM configuration. Unfortunately, I see the /dev/rdsk/c1t3d0s7 with status > MEMBER < and I can't select it for the new ASM installation.
I will really appreciate if anyone can let me know how to change status from MEMBER to CANDIDATE.
Thank you for your time.
DanielD

Overwrite the first several MB of the partition with /dev/zero.
So, use this command:
# dd if=/dev/zero of=/dev/rdsk/c1t3d0s7 bs=1024k count=10
That clears out the ASM header on the disk so that it looks like a clean disk again.
-- John

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cloning the asm configured database

Similar Messages

Maybe you are looking for