Cloning tool causes keyboard not to work.

Every time I use the cloning stamp tool to edit a file, sometimes I hear a piano-like sound and my keyboard won't work. I have a Mac running Yosemite but even before the upgrade it did that. I'm using Creative Cloud but had CS4 and it did it with those too. Is it a glitch? Is anyone else having this issue?
Under tags there seems to be a 'cloning stamp bug' choice. Then I'm not crazy! So, what's the solution?

Have you done a Forum search yet?
What do you have to do to resolve the issue at current?
What have you done for trouble-shooting so far?
Please read these:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Similar Messages

When trying to update to 4.0.1 it locks up when checking for updates do plug-in. This causing Firefox not to work. Why?

When trying to update to 4.0.1 it locks up when checking for updates to plug-in. This causing Firefox not to work. Why?
I am running windows 7. I have tryed uninstalling and reinstalling and every time it locks up at the same point, when it is checking for updates to plug-ins. I have run troublt shooting and it tels me :Incompatible Application. Why??

Create a new profile as a test to check if your current profile is causing the problems.
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

With Windows Vista, the most recent Itunes update 1/30/2014 has caused Itunes not to work, with a Mscvr80.dll not found error. Uninstalled all Apple programs, and installed fresh Itunes. Same problem. Tried to reinstall using an older install exe nogo

Recent ITunes update has caused ITunes not to work. Tried uninstalling all Apple products and reinstalling fresh. Still doesn't work. Tried reinstalling from an old install.exe. Install went nicely but program won't start as it says it can't open the library file.

Now that I have no way of accessing any of the products I have purchased from ITunes, I will most certainly never use ITunes again for any reason. Why throw good money after bad? I will use another MP3 player that is not as cumbersome or proprietary.
Lesson learned.

Skype 7.6 causing Chrome not to work

A few days ago, Skype updated automatically to the latest version (7.6). Since then, I have been experiencing awful issues with Chrome and with Skype itself. --ISSUES WITH CHROME--If Skype is running, any page I load on Chrome won't appear, no matter if it is among my favourites or if I type in the web address myself. Chrome does reach the website, which means the search engine works, but it either doesn't show the page, which means I see Chrome's black background (...the one you see when you're reading PDFs on Chrome for instance) or it shows the actual page for half a second and then it goes back to the said black background. Refreshing the page won't work either. Plus the Adblock Chrome extension keeps crashing. How do I know it's Skype's fault? Because as soon as I quit Skype 7.6 everything goes back to normal! --ISSUES WITH SKYPE--As if this wasn't enough, Skype 7.6 has been having terrible issues also in terms of functionality. As soon as I start running the program, it looks as if it is working, but then, as soon as I start a conversation, the page won't move and I can't see what I've written and what other people have written. Names and conversations only appear (in bits and pieces) if I pass my mouse over them...it's as if Skype was constantly stalling. As of now, Skype is not usable and it's even causing issues to my Chrome. Any help will be greatly appreciated.

Try to reset all Internet Explorer settings: http://support.microsoft.com/kb/923737 Next reset LAN settings: Open Internet Explorer. Go to Tools -> Internet Options -> Connections -> LAN settings. Make sure that the only option selected is “Automatically detect settings”. Next clear all Temporary Internet Files: Open Internet Explorer -> Tools -> Internet Options -> General. In the section “Browsing history” press the “Settings” button and in the next window the “View files” button. Delete all files from the Temporary Internet Files folder.

HP Pavilion g6-2235us onboard keyboard not completely working

HP Pavilion g6-2235us. The top row function keys work. The rest of keyboard does not. Scanned for virus's and worms. None found. Did a go back.and Reloaded drivers. Did not help.
Keyboard works in bios setup. Reset by pulling battery and pwr. Hold down pwr button for (:30). Hit escape while booting to get into set up. Loaded default, and exit out. Keyboard works for a few minutes to a few hours before needing to plug in a usb KB. Tried to contact HP, but they will not talk to me because the warranty expired a few 2 months ago. This unit was been troublesome from purchase with wierd behavior that HP blamed on Windoz 8. Not sure about this issue. My next laptop will be a Sony due to lack of support from HP!!!

Hi BOBOJ,
Welcome to the HP Forums!
Use the following link to troubleshoot the issue. Notebook Keyboard Troubleshooting (Windows 8)
If you require additional assistance please post back and I will gladly follow up.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

10.1.2.3 patch causes webutil not to work.

I had 10.1.2.2 Developer Suite working with webutil. Then we applied the 10.1.2.3 patch. Now webutil does not work. I read metalink and it said to use jacob_1.10.1.zip. I did that. I also got the frmwebutil from webutil.2.2.zip. I signed both jacob.jar and frmwebutil.jar. I also overwrote the jacob.dll with the new jacob.dll. I recompiled a previously working webutil form. When I run the form I get this... Remember, this all worked before I applied the patch.
Reading certificates from 141303 http://dxmooisaf:8889/forms/java/frmall.jar | C:\Documents and Settings\mreichman\Application Data\Sun\Java\Deployment\cache\6.0\63\f488f7f-7d1a1920.idx
Reading certificates from 141303 http://dxmooisaf:8889/forms/java/frmall.jar | C:\Documents and Settings\mreichman\Application Data\Sun\Java\Deployment\cache\6.0\63\f488f7f-7d1a1920.idx
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.3
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.3
Reading certificates from 141303 http://dxmooisaf:8889/forms/java/frmall.jar | C:\Documents and Settings\mreichman\Application Data\Sun\Java\Deployment\cache\6.0\63\f488f7f-7d1a1920.idx
java.lang.ClassNotFoundException: oracle.forms.webutil.clientInfo.GetClientInfo
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
.....

Ok, let me see if I can clear this up.
1. First from a patching point of view it doesn't matter if you are using Application Server or Developer Suite 10.1.2. The patches are the same for both.
2. The base release (complete product) is 10.1.2.0.2. Both 10.1.2.2 and 10.1.2.3 represent patched versions of 10.1.2.0.2. All patches are cumulative so it doesn't matter if you got to 10.1.2.3 by way of .2 or .0.
3. Patch 9593176 is a Forms Bundle Patch intended to be installed on top of 10.1.2.3 only. Refer to Note 1188127.1 for more information about this patch.
4. If you patched from .0 directly to .3 and skipped .2, it is important that you refer to Note 1058514.1 in order to address a known issue with said path.
5. As already noted, applying patch 9593176 does require the use of Jacob 1.10.1 if you plan to use the OLE functionality. However, more important is that this patch also includes a replacement for webutil.pll. It is very important that older versions be removed, including its related PLX file. You then need to generate a new PLX using the new PLL.
Last but never least, is the original issue...
...java.lang.ClassNotFoundException: oracle.forms.webutil.clientInfo.GetClientInfo...This error suggests that either the jar file is not being downloaded or the bean is not being identified in the form. The latter is usually the issue and can be corrected by regenerating the FMX and ensuring that you use the compile_all=yes option when doing so. However, I would first recommend that you address the pll info I mention in #5 first.
If this doesn't correct the issue, then look closely at the java console and see if you note the frmwebutil.jar files as being downloaded. If not, then it is likely missing from your archive entry or not being picked up for some reason and this is the cause of the problem.
Michael Ferrante
Senior Principal Support Engineer
Forms Global Technical Lead
Oracle Corporation
Edited by: Michael Ferrante on Mar 29, 2011 3:48 PM

TS3038 Keyboard not fully working in Windows 8.1 Enterprise Installation

I installed Windows 8.1 Enterprise on iMac with Boot Camp v.5.1. I have a wired apple keyboard that has a ten key pad. The ten key works when I boot up in Mac OS Mavericks, but it does not work when I boot up in Windows. Any ideas on how to fix this?

Did you try pressing the num lock button when in windows? If not, I think it will just behave as arrow keys

Programs The Cause Quicktime Not To Work.

Hi,
I'm running Windows Vista Ultimate x64 SP1 with 2GB DDR2 RAM, 160GB HDD, GeForce 9400 GT, AMD Athlon Dual Core 5400+ 2.80 Ghz Processor.
Quicktime does not work properly for me, it is jumpy and different colors randomly flash. I have followed other instructions in similar posts but they have had no effect.
I am going to change to Vista Ultimate x32, but before I do that I am wondering if there is any software or hardware that I may have that would cause QT to do this.
Regards,
Ben.

Yes, I have done that.
I've tried a few different things and none of them have worked, so I'm thinking it must be some hardware and/or software that is causing this to happen.

Adding Signal Processing vi to application causes exe not to work

I am having a problem with building an exe that I hope someone can help me with.
I have a LV2010 (10.0.1) project that I a build into an exe. This has worked fine and the exe works as it should.
My problem starts when I add a vi.lib (Extract Single Tone Information) vi to the code to calculate the detected frequency of a vibration signal. I can run the application in Labview without any problems.
When I try to build the executable I get an error:
This is the full error message:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Cannot save a bad VI without its block diagram.
After searching through the message boards I found that I could enable debugging in the Build Specifications and that would allow LV to compile the exe without error:
But the next problem is that the exe cannot run:
I am stuck now. The exe does not run on my development machine. Am I missing some dll files that are needed because of the Extract Singal Tone Information.vi?
Any ideas would be greatly appreciated.
Thank you.

I have managed to fix this problem.
I am posting my solution here for anyone that might run into something similar.
It turned out to be a strange problem to solve.
first I tried to create an executable using only the Basic Single Tone Measurement.vi as suggested. This I could build and run without any problem.
This showed that the vi was not the problem but rather something in my project.
Next I tried various ways to build the project with the Basic Single Tone Measurement.vi placed at different locations in the project. But nothing worked.
What finally resolved this problem was that I deleted a subvi that had originally contained an fft vi inside a true/false statement that was wired to a constant (to disable it). Even though the fft vi had been long since deleted and the conditional statement as well then for some reason the project would not build correctly when I placed the Basic Single Tone Measurement.vi anywhere in it.
To summarize. I deleted a subvi that had previously contained a vi to calculate the fft and eigen frequency and placed the Basic Single Tone Measurement.vi in the top vi. This solved the issue and I could build and run the exe without any problems.

Adding sound to buttons causes then not to work.

I have a flash project with 3 buttons in each frame 1 button is the correct answer and two are not
here is the code
import flash.events.Event;
btnA.addEventListener(MouseEvent.CLICK, checkCorrectness);
btnB.addEventListener(MouseEvent.CLICK, checkCorrectness);
btnC.addEventListener(MouseEvent.CLICK, checkCorrectness);
function checkCorrectness(e: Event): void {
if (e.target == btnA) {
if (correctA) {
totalscore++;
} else if (e.target == btnB) {
if (correctB) {
totalscore++;
} else if (e.target == btnC) {
if (correctC) {
totalscore++;
score.text = totalscore;
if (totalscore == 18) {
gotoAndStop(21);
return;
nextFrame();
stop();
var totalscore = 0;
var correctA:Boolean = false;
var correctB:Boolean = false;
var correctC:Boolean = false;
score.text=totalscore;
each frame has this code below with the correct answer changing from frame to frame
correctA = true;
correctB = false;
correctC = false;
all works fine but now I have to use sound in the buttons so I duplicated a button and changed the name of one button to "true" and the original I changed to "false".
I added in each of the two new button names a sound effect ( sound 1 for button true and sound 2 for button false)
So the frame list looks like this
frame 1
correctA = true;
correctB = false;
correctC = false;
button name 1 true instance name btnA
button name 2 false instance name btnB
button name 3 false instance name btnC
frame 2
correctA = false;
correctB = true;
correctC = false;
button name 1 false instance name btnA
button name 2 true instance name btnB
button name 3 false instance name btnC
according to this each correct button would trigger sound1 telly the score and move to the next frame
and each incorrect button would also tally the score and move to the next frame.
Not all selections are making the frame move nor the score tally.
any help.
ALL OF THIS WORK FINE WITHOUT THE SOUND AND THE BUTON NAMES CHANGED. SO THE RESULT IS I ONLY HAVE A WORKING FILE BUT WITHOUT THE SOUNDS FOR EACH BUTTON.
R

Great works like a charm, one thing though. Every time I click the Incorrect button button I hear that audio twice . I checked the actual mp3 and it just one sound.
Heres the code you gave me
var correctSound:CorrectSound=new CorrectSound(); // assign this class
var incorrectSound:IncorrectSound=new IncorrectSound(); " "
function checkCorrectness(e: Event): void {
if (e.target == btnA) {
if (correctA) {
totalscore++;
soundF(true);
}else{
soundF(false);
} else if (e.target == btnB) {
if (correctB) {
totalscore++;
soundF(true);
}else{
soundF(false);
} else if (e.target == btnC) {
if (correctC) {
totalscore++;
soundF(true);
}else{
soundF(false);
score.text = totalscore;
if (totalscore == 18) {
gotoAndStop(21);
return;
nextFrame();
function soundF(b:Boolean):void{
if(b){
correctSound.play();
} else {
incorrectSound.play();

Mountain Lion causing apps not to work, how can I downgrade to Lion without Time Machine Back-up?

Since installing Mountain Lion, I have found applications that don't work. I want to go back to Mountain Lion, unfortunately I had trouble with my Time Machine back up hard drive a couple days after installing Mountain Lion and I don't have any back up to work from. Tried to go to App Store and redownload Lion from there under purchases, but I got message that said "You can’t upgrade this version of Mac OS X because a newer version is installed."
I have another mac that I can download the Lion install package to and then drag it over to this computer, so the question is, Will I be able to re-install Lion over the upgraded Mountain Lion without any problems?

Babowa - By On Screen, I mean it still shows up in the disk utility and reads the following:
MATSHITA DVD-R   UJ-898:
Firmware Revision:    HE13
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    1024 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    To show the available burn speeds, insert a disc and choose File > Refresh Information
There are several links here on the support forums with manyyy others having the same problem: https://discussions.apple.com/thread/4150905?start=30&tstart=0

JRE 1.5 update causes code not to work

OK - I need to understand the relationship between the private JRE in the JDK and the public JRE.
I let the auto-update function update my 1.4.2 JRE to 1.5 and now my application won't run from the command line (although it will still run from inside NetBeans).
My real confusion is that my classpath specifies the JRE inside the 1.4.2 JDK as tthe one to use.
Here's my command line:
java -classpath c:\JavaCode\IrrigationControl\dist\IrrigationControl.jar;c:\JavaCode\freetts-1.2\lib\freetts.jar;c:\OneWireAPI\lib\OneWireAPI.jar;c:\j2sdk1.4.2_06\jre\lib\rt.jar;%classpath% MainProgram.MainProgramWindow
I am completely confused. any help would be appreciated.
Peter

Thanks,
I am not trying to use 1.4.2.
I copied this command line from a Java example and never really understood why it is the way it is. I've read the Java books I have and since they try to be platform independent, they are always vauge on the details of building a windows command line.
Peter

Help, Spry Tabbed Panels are causing links not to work

Here is the page: http://www.spalutions.com
Here are the trouble spots:
Menu at very top of page
Home | Contact Us | Site Map
Links within the panels
Email link at the bottom of the content area
Any help would be greatly appreciated!

Fascinating.
The Validator found three important errors you might fix to see if they help resolve the problem:
at about line 107:
<div class="editable"div id="contentWrapper">
at about line 197:
<div class="editable" div id="footer2"></div>
and
id="footer" twice on page
After you fix these, run the Validator again: http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.spalutions.com%2Findex.html to find any more important issues.
Then let us know if that helped!
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Keyboard not working even when trying to go to BIOS

Hi,
I have IBM Thinkpad R60 9458 A13 laptop having Windows 7 ,today its keyboard is not working but in Windows its function keys like brightness or sound is responding without pressing Fn key.
And no other letter or numeric key is responding.
I tried to boot the laptop and trying to press Thinkvantage button, its not responding.
I then inserted Windows 7 OS DVD and when prompt comes to press any key ..i tried all key but no help.
I then clicked on Compatibility option to have keyboard on screen which is working fine.
Pls advise what would have gone wrong
Regards
Sandeep

Hi Sandeep,
Welcome to Lenovo Community Forums!
I’m sorry to hear that a few keys in the keypad of your Lenovo ThinkPad R60 is not working properly.
Check if the keys are working in different applications. Some keys such as the function keys F1 through F12 will not work with every program. An easy way to test this is to open notepad or other word processing program and trying the key. Try getting into safe mode and see if the keys work. Remove the key from the keyboard and clean it. In some situations dirt, hair, dust, etc. can obstruct keys causing them not to work.
Please try to get into BIOS mode and see if the keyboard is working there. Tap F1 key while system shows the Lenovo logo to get into BIOS.
1. If you are able to use the keyboard in BIOS, it could be a software issue. I would recommend in that case to do a System Restore which will revert the settings in your system to a previous time.
2. If keyboard doesn’t respond in BIOS as well, I strongly suggest you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cloning tool not working in LR 5

Cloning tool is not working but healing tool is. Anyone else having this problem and if so how can it be fixed?

Bob...it lights up white but when i try to make my anchor it acts like the healing tool....i would have answered sooner but log in troubles too....

Cloning tool causes keyboard not to work.

Similar Messages

Maybe you are looking for