Close folders while drag-and-dropping files?

When dragging files to move them, often some large folders will be open, which means I have to drag/scroll thru the file list to get to other folders. Is there a way to close folders while dragging files?

EMichaelM wrote:
I just installed two widgets that are supposed to function by dragging and dropping files into them. How do I get access to files? How do you get files from the Finder into the dashboard?
You need to activate Dashboard's "Developer Mode" in order to keep widgets active on the desktop.
Open Terminal and enter the following command:
<PRE>
defaults write com.apple.dashboard devmode YES
</PRE>
Close Terminal, log out of your user account, and log back in again. To move a widget onto your desktop, activate Dashboard and start dragging the widget to the desktop. Press F12 before letting up on the mouse button to close Dashboard, and the widget should now be permanently affixed to the desktop. Drag to your desired location.
Steve

Similar Messages

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

Drag and drop files into folders in iPad reader? or iTunes?

is it possible to drag and drop files into folders in iPad reader? or iTunes? It is very clunkey to have to click each separate file to instruct it to move to the folder. Better still, can I just sync an existing folder on my hard drive so the pdf's inside always remain up to date on my iPad?

There is no way to drag and drop in Reader on an iPad.
There is no way to sync PDFs in a folder on your hard drive to those inside of Reader.
There are readers (which are NOT free) which let you do some of these things and have more capabilities. You might check out PDF Expert from Readdle which costs $9.99 US.

Unable to drag and drop files or folders

Hi
I'm unable to drag and drop files or folders. I can't drag from a folder to desktop, I can't drag from finder. I can't move files around. I can't drag from itunes into ipod.
I've run Onyx and disk permission repair, cleaned all caches etc, all to no avail.
Get info tells me I have read and write permissions.
Can someone please help me.
Thanks

I'm having the same problem, the terminal command to make that testfile worked, guess its a good sign but i wouldn't know, I also have a couple of extra problems:
It started with VisualHub saying "Critical componats of Mac OS X are missing or damaged on your system, Without them, VisualHub is unable to continue. The affected componats is/are: - /tmp Temporary Directory. Try Repairing Permissions using Disk Utility"
So i did that using OnyX, rebooted, still didn't work, so i remember hearing about how reinstalling .3 of 10.5.3 can help replace files that are lost, so i did that and thats where it went wrong, it rebooted and it seemed to go good, but then i noticed a big ? where Camino is meant to be on my Dock and i looked in my stack and it was gone, Safari would crash on the 5th letter i typed anywhere on the browser, (Safari and Webkit Nightly) At least Firefox works so i can post this, Spotlight is gone from the menu bar, i can't drag anything from the dock and i can't drag safari from the App stack or the dock crashes.
The thing that worries me is why was Camino deleted? and Safari crashing?
If anyone has a solution to this you would be a HUGE help, i really don't want to reformat my mac because i don't have anywhere to backup my files, i don't have the money for a decent sized HDD to backup into.
Thanks all who help!!!

Can't drag and drop files into Attachments while in Administrator mode

I can drag and drop files into attachment easily when I'm not in Administrator mode. But I need to be in Administrator mode at work and therefore for some reason I cannot drag and drop files into attachments; I'm forced to manually search and select particular files for attaching, which significantly slows my day-to-day work.
Is it a bug?
I have the up-to-date version of Thunderbird and I use MS Windows 7 Ultimate.
Any help would be highly appreciated.
Thx

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

I want to have two folders of Finder so that I can easily drag and drop files from one folder to another

I have been trying to reorganize my files. When in Manila I created a folder called Manila 2015 in Documents. I have the Mother folder Files 2015 with several subfolders like Finances, Personal, Tax etc. I want to have two finder folders simultaneously so that I can drag and drop files from the Manila 2015 folder to the various subfolders in the mother folder Files 2015. I am not able to open two windows of Finder on the desktop.

I have since found out that a new finder window can be opened witht the short cut Command+N.
Thanks anyway.

Still loose ability to drag and drop files in Project pane.

In the last two weeks, I've had two instances where I lost
the ability to drag and drop files within the Project pane.
However, here's the kicker...the problem doesn't manefest itself
until after I end my session, close RH, then restart the computer
and restart the project. That means I don't know that I'm working
in a broken project until AFTER I've zipped up and saved the
current project. I tried addressing this in this orum once already
and I received some suggested fixes (included in the list below)
but it never fixed and and has happened again.
Some pieces of information:
- I've deleted the .xpj and cpd files, no joy.
- I've regenerated the output, then tried to move a file, no
joy.
- I've generated a CHM (supposedy to update other files), no
joy.
- I'm not attempting to move a file to a directory where that
name already exists
- If while I'm having the problem, I create a nw project, new
folders, and new topics, they move around fine.
- If I create a topic IN the directory with the problem, I
cannot move that file.
- I've zippd up a broken project and sent it to Adobe. They
openned it and it was fine. They zipped it back to me and it still
wasn't.
- If I create a new project, replicate my directory
structure, and import the htm files into the new structure (a
ubdirectory at a time), the files move fine.
- I'm only working local on Windows 2000 with 30 GB of disk
space, and I have not installed anything else on the computer in
the last 2 weeks.
- I've escalated this to the next level at Adobe and am
sitting by my phone with my headset waiting for the call back
"within the next two hours".
Anyone seen this?

quote:
Originally posted by:
Amebr
Could the files have somehow been set to read-only?
I'm not sure on the exact details of your process, but if you
open the project after unzipping it, perhaps the unzip process has
changed that file attribute...?
I appreciate your response, but no...all files and
directories had all permissions allowed. The zip process wasn't
involved until aftrer the problem showed itself...I zip just for
backup with the hope that I never have to go to it. It was my
working project that lost the ability to move files. It just turns
out that after it happened and I went to the zip that it showed
that the problem had affected the files before I zipped them and
therefore, the zip was of the broken set.

Drag and dropping files into widgets

I just installed two widgets that are supposed to function by dragging and dropping files into them. How do I get access to files? How do you get files from the Finder into the dashboard?

EMichaelM wrote:
I just installed two widgets that are supposed to function by dragging and dropping files into them. How do I get access to files? How do you get files from the Finder into the dashboard?
You need to activate Dashboard's "Developer Mode" in order to keep widgets active on the desktop.
Open Terminal and enter the following command:
<PRE>
defaults write com.apple.dashboard devmode YES
</PRE>
Close Terminal, log out of your user account, and log back in again. To move a widget onto your desktop, activate Dashboard and start dragging the widget to the desktop. Press F12 before letting up on the mouse button to close Dashboard, and the widget should now be permanently affixed to the desktop. Drag to your desired location.
Steve

Ms word drag and drop files

I have switched from a PC, but always used Word. I have always organized my documents in folders, often just drag and drop. Can you tell me how to move Word Files into Word Folders by dragging and dropping?

Where are you trying to drag from and to? Post some screen shots if that helps you clarify. Press command-shift-4 and drag a rectangle around the area on the screen that you want to capture. Then click the camera icon in a reply here and select the screen shot file on your desktop to insert in your message.

How to drag and drop files in Time Machine Capsule?

Hi, all
I have recently bought a Time Machine 2 TB. I have backed up my MacBook Air over the Time Machine. I was trying to copy or drag and drop files in the time capsule, but it wont allow me. It Neither does allow me to create any new folders in the Airport Time Machine. If i try to drag and drop files in it, it says, click to Authenticate, however, there is no place or tab to authenticate. I am the administrator.
Please advise.
Thanks

It sounds like you are trying to copy / paste files to the Time Capsule Finder icon, when you should be copying / pasting to the drive on the Time Capsule, which is named "Data" unless you have changed it.
Open any Finder window and look for the Time Capsule icon under the Shared heading on the left side of the window
Click on the Time Capsule, which will display a folder to the right named Data, unless you have changed the name of the drive
Double-cllick on Data to mount the drive on the desktop
You can drag / drop or copy / paste files onto the drive icon, or open the drive and drag files into the open window.
The first time that you do this, you may be asked for the Time Capsule device or disk password.

How to drag and drop files between two JFileChooser

Sir i want to drag and drop files between two JFileChooser i don't know how to do that. So is there any reference code for that so that i can able to do it. I have enabled setDragEnabled(true) for both the jfilechooser now i don't now how to drop files in them means drag file from one jfilechooser and drop it to another JFileChooser,.
Plz help me this is the requirement in my project.

Note: This thread was originally posted in the [New To Java|http://forums.sun.com/forum.jspa?forumID=54] forum, but moved to this forum for closer topic alignment.

Cannot drag and drop files in Finder on Yosemite 10.10

This is basically exactly as it sounds. I just discovered that I can't drag and drop files in the Finder anymore for some reason. I've restarted 3 or 4 times since upgrading, and I've reset the SMC and PRAM already. Because of this, I can't update an application I'd like to. Copying the application does not work either; the paste option is greyed out It's not just applications; click-and-drag and three-finger drag simply don't drag the file. It is not happening invisibly either; going through the motions and dropping the file on Applications yields no result.
I searched the Web for this but didn't find anything similar for Yosemite. If anyone has a suggestion or the same problem, I would love to hear it.

For two days I tried everything I could to get the drag and drop to start working again in Yosemite on my MacBook Pro Retina. I even re-installed the OS via Disk Recovery. I wound up at the Apple Store where they couldn’t find the bug either, but we did the following and I am back up and running. There is a bit of a downside, so please read all the way through.
I have no idea if this will help you, but if you log in under a GUEST account and this drag and drop issue is NOT there - then try this. For whatever reason this bug was localized to just my single user settings Library. The GUEST account could drag and drop fine. Weird. Anyway, here’s what we did at the Apple Store that has kept me up and running….
Create a new user
Logout (deactivates the busted user library) and then login as that new user.
Enable Root User (superuser) while logged in under this new user. YouTube has some 1min. videos on how to do this.
Navigate to the Library (which is usually invisible) listed under your original admin user account.
Rename this folder. I just added ORIGINAL to it.
Also, create an alias for this folder and leave it there.
Go turn off Root User and log out.
Now, when you log back in under your usual User Acct. the system can’t find the Library system folder (because you renamed it) so it creates a fresh one. This new Library folder will still be invisible to you, but should work.
This fixed my drag and drop problem.
What this does though is kill all of your plists, saved website passwords, bookmarks, application settings, etc. for everything. I mean everything. Which kind of stinks.
This is why we created the alias in Step 05, click on it and you can open your ORIGINAL Library folder and drag out the files as you need them. I guess one day I'll drag over the one setting that borked my machine, but I haven't found it yet.
This is certainly not ideal and may not even be the best solution. But it got me up and running with no loss of files, just slows me down as I have to re-populate all my log-ins, etc.
Hopefully someone will come up with a better fix or patch.
Hope this helps.

If I were to drag and drop files from an OSX 9 onto an external hard drive (1 TB), assuming there is still plenty of space left, will I be able to use this same external hard drive to back up my iMac (Mountain Lion)?

If I were to drag and drop files from an OSX 9 onto an external hard drive (1 TB), assuming there is still plenty of space left, will I be able to use this same external hard drive to back up my iMac (Mountain Lion)? And would it ask me if I want to initialize (thus erasing it) or eject the hard drive like the OSX 9 did?

I was trying to follow this thread because I was curious about the OS 9 installation - until I realized you have another thread going about the very same subject, albeit with a different subject line.
FWIW: it is best not to double post - things get far too confusing after a while.
@ Kappy (in case you hadn't seen the other one):
https://discussions.apple.com/thread/5054178?tstart=0

Open dialogue box in Lion is not supporting drag and drop files (UPDATE)

This is freaking me out. Because now in Lion you can't drag and drop file from the desktop (and other folders!) to open dialogue box. It was most usefull function in Mac OS X. Why Apple kill usabillity?
Access to the desktop is not a problem (command + d), but if the current file is located deep in the hierarchy of folders, it becomes a big problem!!!
Dear Apple, please fix it as soon as you can.
UPDATE: Omg, I found the problem, it works only if I drad and drop file on the bottom panel, not in all open dialogue box area:

Interesting, this is the second time today I've seen this one come up. It does work, drag and drop works like crazy everywhere here. What does console say when it happens (or not, in your case)?

Keyboard shortcuts while dragging-and-dropping?

In Windows, when I'm dragging and dropping files from one folder to another, I can press keys on the keyboard to force it to change its behaviour -- for example, if I hold the Crtl key down, it will force it to copy files instead of move them. Similarly, I can hold down the shift key to force it to move files when it wants to default to copying them.
What is the equivalent keypress on a Mac running OS X 10.9.2? It keeps moving files when I want to copy them (and vice-versa) and I just can't figure out which key(s) to press while dragging-and-dropping to make it change its behaviour.
Thanks for your help,
Laurence MacNeill
Mableton, Georgia, USA

Press the Option key to force a copy, or the Command key to force a move. Pressing both at once will create an alias.
(103123)

Close folders while drag-and-dropping files?

Similar Messages

Maybe you are looking for