Close gesture fails after IOS 8

Hi everyone! I've just started using this forum. I have an IPAD Air and since i updated it to the ios 8, i start having some "gestures" preblems.
The thing is simply. When I try to close an app using the 4 fingers gesture, it just ignores it. So, i am forced to use the home button.
As a temporary fix, I drop down the notification center. After I drag it down, and then up, this issue seems to be corrected.
I usually experience this bug after a short sleep period.
Anyone else experienced the same??
Im using IOS: 8.0.2 (12A405)

Same here with a 1m cable. Another 1m cable is working just fine. One came with the iPhone when I bought it, the other I bought separately, but I couldn't tell now which one is which. I upgraded to 8.2 last night. Apple, what the f**k are you doing?

Similar Messages

IPhone 5S fingerprint reader fails after iOS 7.0.3 upgrade

Hi all.
I recently updated my iPhone 5S to IOS 7.0.3 and ever since then, I am struggling to unlock my phone every time. I press the home button and then I used to just leave my finger on the button and it would unlock. Now it just doesn't seem to recognise my finger is even there.
I lift my finger off and put it on again and nothing. I lift my finger off and actually press the button again and leave my finger there and sometime it unlocks, sometimes it doesn't. It doesn't even say "try again" it simply doesn't recognise I'm trying to unlock it. I'm ready to chuck the bloody thing at the wall!!
Has anybody else experienced this problem since updating to IOS 7.0.3?

I bought my iPhone 5s a few days ago. It came with 7.0.3. It works 100% of the time, but people were having trouble with it when they went from 7.0.2 to 7.0.3. A lot of times, when doing an upgrade, the fingerprint scanner problem can be solved with some simple troubleshooting skills:
Troubleshooting steps:
First, if you have never rebooted your phone after the update, it helps to reset your phone. This is just pressing and holding the home button + power button until the apple logo comes on the screen (the phone will power off and then on. When Apple logo appears, you can let go of both buttons).
If fingerprint scanner is still hit and miss, you should redo your finger prints by go to settings->general->touch id & passcode->touch id. Delete all saved fingerprints (swipe to the left and press delete). Add fingerprints again.
If it still doesn't work or still hit and miss, you can always reinstall the ios. This can be googled. For me, it is too much trouble, so I go to the next step..
Finally, if that's still no good, you can always take it back to the apple store. The warranty on it is a full year so it is free for them to just look at it and tell you if it's a hardware problem. I know cuz I have replaced my iPad, iPhone, and even my macbook this way. No, I don't do it on purpose, but apple products has flaws too. Especially if it is a hardware problem, I need it replaced - and since it is still under warranty, it is replaced for free. So I don't hesitate to stick it in their face. Well, don't be mean about it though. Just say it like it is without the attitude and they will do what they can to help you fix it.
Tips: when you replace your phone, they may or may not give you a "refurbished" phone. That's the only thing I don't like about replacing my apple things. BUT since iPhone 5s is so new, the chances of you receiving a refurbished phone is quite slim... Or so I was told. So don't wait.

Touch ID often fails after iOS 7.0.3/7.0.4 updates

Hi!
Am I the only one having issues with Touch ID after updating to iOS 7.0.3/7.0.4? I'm having hard times trying to store my fingerprints and then using them to unlock my phone. As a matter of fact, I'm often forced to use the unlock code instead of my fingerprints to access the device.
My iPhone is fine just as it was before updating to iOS 7.0.3. My Touch ID worked fine since this update.
Anyone else with the same problem?
Greetings from Italy!

Hi!
Am I the only one having issues with Touch ID after updating to iOS 7.0.3/7.0.4? I'm having hard times trying to store my fingerprints and then using them to unlock my phone. As a matter of fact, I'm often forced to use the unlock code instead of my fingerprints to access the device.
My iPhone is fine just as it was before updating to iOS 7.0.3. My Touch ID worked fine since this update.
Anyone else with the same problem?
Greetings from Italy!

After iOS 6.1 update no GPS? iPhone 3gs

GPS fails after ios 6.1 update
Tried three diff apps that worked hours before,
All fail to respond to GPS speed etc?

Hi
I have also the same issue after update to 6.0.1 , 6.1 & 6.1.2 , the problem started from 6.0.1 in 6.0 was ok both GPS & wifi , after 6.1 the wifi has also issues in iphone 3GS!! Apple do something!

Why did my airtunes fail after updating to iOS 5.0

I used to be able to play most anything from my iPad to either of my Airport Express units and the speakers atteched to them.
After iOS 5.0 update to my iPad 1, i am no longer able to do so.
The setup still works correctly with itunes on laptops in the house, and only fails with the iOS 5.0 updated unit.
Any helpful thoughts?
A

What happens if you try a hard reset of the iPod? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, see this article for more troubleshooting assistance.
http://support.apple.com/kb/ts1702
It may be necessary to restore your iPod from a previous backup in iTunes or to factory settings if the problem still persists.
B-rock

IPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

Mobile connection fail after updating apple 4s to ios 6.1.3

Mobile connection fail after updating apple 4s to ios 6.1.3
intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
what is the solution for this......

try resetting your network settings.
Settings.app -> General -> Reset - > Reset Network Settings
CMIIW

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed. After reading a bunch of forums and posts and trying everything, I did manage to get it to work. I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder. Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore. Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.

Ipad locks up after iOS 8 upgrade

WWhy does ipad lock up in safari after iOS 8 upgrade

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

Problems with sound from external speakers after iOS 5.0.1 update

Have others experienced problems with external speakers on the Iphone 4 after iOS 5.0.1 update? My phone no longer rings, sounds when i receive a text message, sounds alarm, etc. Vibrate works fine and when i plug in headphones I can hear music through the headphones. Any fixes for this?

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Iphone 4s battery melts after ios 7.1

Last Friday I've upgraded to IOS 7.1. especially after learning that the upgrade is especially helpful for iphone 4s,
Yes it fastens the device but the battery "melts"
I've searched the issue from the web and applied all the suggestions to improve battery life after ios 7.1.
If I don't use internet facilities (even wi-fi) its OK, no problem,
But from the moment I begin to use wi-fi or cellular its like a count down 95-94-93-92...., feel really bad about it,
Now I just use it as a "phone" not a smart phone,
If a want to use it as a "smart phone" it is no longer a mobile- I shoul use it with battery charger,
Hope a fix will come as soon as possible,

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
If this doesn't help, back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file or maybe it's one of your apps causing problems. If it continues, take it to an Apple Store for evaluation of a possible hardware problem.

IMessage failed on iOS 8.1

My Ipad Air's iMessage function failed after the upgrader to iOS8.1
I do not have this issue on my iphone, which I did not update and still running on iOS8.02
Is there any solution to fixing this?

Hi chrisfromst. mellons,
If you are having an issue with Messages activation, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Best,
Brett L

IMac Display failing after 1 year of average use.

I have a mid 2011 27" iMac (the one with thunderbolt) and the display is starting to fail after 1 year of average use (an hour of use every day on average). The display is now much dimmer on the left half of the display (the GPU sits underneath that portion) and also flickers the whole display now and then to a lower brightness.
I am about 45 days out of warranty and basically will have to cough up $500 to have it fixed by Apple. My questions are... Has anyone else ever had this happen to them? The genius bar employee thought that it was something he has seen happen to displays when exposed to heat over long periods of time. So basically playing starcraft 2 and doing video encoding killed my display if you believe that to be the cause.
Are there any conditions in which apple would recognize this as a manufacturing defect and fix it free of charge? Otherwise it looks like im writing a check for $500 next week.

Today a dark streak showed up on my display right in the middle. It is shaped like a zebra stripe but is dark grey and wont go away.
I too have a mid 2011 27" 3.4GHz i7 iMac with a 2GB Graphics card . Im about 50 days out of warranty.
Seems like its perfect coincidence for apple that 50 days after my warranty runs out, the most expensive thing to repair breaks.
After doing some research it seems like there is a lot of people with this model experiencing this problem.
Pretty sad that my 2005 iMac is holding up better than my brand new iMac.
Been saving up for it for like 4 years and I dont have the money to repair it.
I tried everything, I knew none of the stuff i tried would work but i still tried resetting the PRAM repairing disk permissions all that good stuff. I even have an air purifer/dehumidifier in my room so i dont know what caused it.
I didnt think i needed applcare because ive had my other imac since 2005 without a hiccup.
Ive rendered out 3d animations using the cpu at 100% for days and it still runs fine.
Havent even used my new imac for anything that would put stress on it.
What i do notice is that it runs hot all the time. ever since I got it. Sometimes just doing basic stuff such as browsing safari it can get so hot where i cant touch it. my GPU normally stays at around 70C and the hottest its been was 80C which is still safe. The alluminum is supposed to transfer heat better but all it does is retain heat more and get super hot. the old plastic one i have is 10x cooler.
What i did notice today tho when my screen problem happened, is that the GPU temperatue is at 50C and wont go above it. I monitor the temperature with istat and never have seen it at 50C and below unless i am just doing a fresh boot.
What really concerns me tho is how the screen went out so close to when my warranty expired.

My status change to pass from fail after 40 days. Microsoft Exam 74-409 Score

Microsoft update 74-409 exam.
My status change to pass from fail after 40 days..
Recived below email. is this possible ?
Dear Valued Customer,
You recently took Microsoft Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center. After close evaluation of the exam, we have made some revisions that resulted in a change to your exam results. We are pleased to inform you that your
status has been changed to ‘PASS’. This update will be reflected in your official transcript within two weeks. A new score report will be mailed to you within two weeks.
Thank you for taking this exam and for your support of our program.

Yes its possible, but its also possible that its a scam trying to entice you to provide information that could be used for identity theft. I would wait a couple weeks and then check your transcript on the MCP site. If the exam shows then it was
for real. If it doesn't then it was probably a fake message.
The reason it might be for real could be that someone challenged the clarity of one of the questions in their comments and Microsoft decided after looking into it that some question was misleading. This might have lead them to accept more than one
answer or to throw the question out. That could have modified your score in some way and promoted you above the Pass line. It is possible, but not likely.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Close gesture fails after IOS 8

Similar Messages

Maybe you are looking for