Close Message on Incident Entity

Hi,
I've registered a Step on Close message of the Incident entity, when I resolve a case, I expect the 'Close' message to be triggered, rather the 'Update' message is triggered twice, and then the 'Close' message,
is this the out of box behavior, or am I experiencing something unusual.
Also please help me when is the 'SetState' and 'SetStateDynamicEntity' message triggered? I've
registered steps on these messages as well, but unable to trigger them.
Appreciate your views and suggestions.
Thanks,
Karishma

Hi,
Actually when you Close a incident request, it will trigger a Update message.
Usually if I want to trigger a plugin after user deactivate or activate a record (which is it is supposed to be triggered by SetState message as well), what I did is register a step on Update event, but using filter : if(TargetEntity.contains("statecode"))
or can be statuscode.

Similar Messages

  • I am running mozilla Firefox and keep getting a "Microsoft Feed Synchronization has encountered a problem and needs to close" message.

    I am using Windows XP, & I am running Mozilla Firefox 3.6.16 and keep getting a "Microsoft Feed Synchronization has encountered a problem and needs to close" message.

    I have exactly the same problems.  If you com up with an answer before I do please reply here. I'll do the same.

  • Is anyone else getting the " itunes encountered a problem and needs to close " message on xp

    is anyone else getting the " itunes encountered a problem and needs to close " message on windows XP

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • Force close message - application App Shop (process com.mobihand.skylight) has stopped unexpectedly

    Just started to get the fore close message "application App Shop (process com.mobihand.skylight) has stopped unexpectedly. I even did a factory reset and still it is showing up. Funny that Lenovos own App Store is causing the force close message. Frustrating....have had the K1 for 3 weeks with no problems and now this everytime i turn on the tablet i get the above message twice.

    I just bought the K1 two weeks ago.  Soon after I received a system update, it said there was an App Store update available and, from then on, I received the error and force close message described above.  I just uninstalled the app and that solved the problem.  Are you suggesting that the app store app is what updates all of the apps I have loaded?  I just thought it was a marketing feature and thought it unnecessary since I could get to the app store another way by going to Apps and Shop.  Could someone clarify its purpose, please?  Thanks!

  • How do I stop my iTunes from getting an "error and has to close" message?

    When I open iTunes, it wants to update my Music Match and I get an error message that "iTunes has experienced an error and has to close".  How do I prevent this?

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • ITunes has stopped working and has to close message on Win 7

    When I plug my phone into the computer iTunes starts to open and then I get an error message that states iTunes has stopped working and has to close.  This seems to only happen while at work and not at home

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • Getting "HPNetworkCommunicator.exe has encountered a problem an needs to close" message

    I have an HP Photosmart B210e, product number CN219A.    I am running Windows XP 32 bit and I am using a wireless connection to print. The problem is occuring on an HP Compaq 8510p laptop.
    I have been using the printer for several months and it has worked great but about a week ago, I started getting an error message.   The first time I try to use the printer after turning on the computer I get a message saying "HPNetworkCommunicator.exe has encountered a problem and needs to close".  I am unable to print from that point forward.  Documents that I attempt to print just sit in the qeue.  However, if I shut the computer down and restart it, the print jobs will print on their own as soon as the computer boots up.  But then if I try to print another document I get the same error message and am unable to print.  Once I get the error message I am unable to use the HP software to check ink levels or communicate with the printer in any way.
    I have attempted reinstalling the driver and software 2 times without any success.  I have run the HP print diagnostic utility and it tells me that "everything checks out okay with your printer" and asks me if I want to print a test page.  I try to print the test page and it is unable to print it.
    I have the printer installed on another computer running windows 7 and it still works great.
    Please let me know how I can fix this problem
    I am unaware of any changes made to my computer other than the automatic windows and Mcafee updates.

    I have exactly the same problems.  If you com up with an answer before I do please reply here. I'll do the same.

  • "itunes has encountered a problem and needs to close" message appears

    Every time I try to open itunes a Windows message comes up saying "itunes has encountered a problem and needs to close." I tried uninstalling and downloading it again, but nothing is working. What do I do??
      Windows XP  

    Does your quicktime work perfectly? I got that message when I tried to open iTunes 5 a couple times, and my quicktime wasn't being sensed by the computer at all. It was just there.

  • ITunes has encountered a problem and needs to close message

    I started getting this message after downloading a free video I got through Starbucks. At this same time I purchased a video and downloaded it. At first I just couldn't manually drag the video into my iPod and then whenever I tried to play any video, even one I could previously play, I would get the error message iTunes has encountered a problemand needs to close. I tried to fix the proble myself so I uninstalled and then reinstalled iTunes; then I restored my iPod. Now, I cannot sync my iPod. Whenever I plug my iPod into my computer to sync it it closes with the same error message. And, I still cannot play any of the videos in iTunes. I have not seen this problem addressed so if you can help me I would appreciate it a lot!!!! Thanks!

    I ended up calling tech support after failing to fix this problem myself. I deleted iTunes and iPod from my computer. I reinstalled both. I reset my iPod and I restored it. Nothing worked. Tech support suggested I delete QuickTime and reinstall it. That worked like a charm. I can now sync my iPod again and ALL my videos play on it.

  • "iTunes has encountered a problem and must close" message opening iTunes?

    Every time I try to open iTunes or Quicktime from my desktop or anywhere else, this message comes up: "iTunes has encountered a problem and must close. Sorry for the inconvenience. Please click here to send an error report." Because of another problem on my computer, I have had to reinstall all my progams recently, including iTunes, but after installing and reinstalling a number of times yesterday, it cannot open. Other programs, like skype, are all working fine. Can someone help me figure out why my system can't open iTunes?

    You can find version 6.0.1 at http://www.oldapps.com/itunes.htm.

  • Process order CLOSE:Message no. BS013

    Hi Gurus,
    I am trying to CLOSE some Process orders which are TECO status,(All are TECO status, and Settled) but when I execute those it gives error messages, and the Log says,
    System status CRTD is active (ACT 112033 0011 )
    Message no. BS013
    Diagnosis
    Object ACT 112033 0011 has system status CRTD (Created).  According to this status, transaction 'Complete' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    your time greatly appreciated,
    Paartha

    Hi Partha,
    Our internal systems behave the same. The reason is that the activity
    cannot be set to TECO unless it has been Released. You can see for any
    activity that setting TECO is not allowed via Edit -> Status -> Complete
    Technically unless the activity is at least at status REL. Therefore,
    when you try to set TECO for the project you get BS013 because status
    CRTD is active for the network activity.
    The system shows TECO as an allowed option for the project as it is
    allowed but only as long as all pre-requisites are met. The alternative
    would be for the system to do the pre-requisite checks before deciding
    whether TECO should be shown as allowed or not. This would not be good
    from a performance viewpoint.
    Regards,
    Abhisek

  • Access denied to resolve/close incidents for Incident Resolvers role

    I have a strange issue that I have found very limited information about.
    I have a group based on incident resolvers security group which worked fine up until i created queues and assigned just those queues to the group. Now users in this group are not able to resolve/close any incidents, as soon as i assign ALL queues to the
    group they are able to which long term is not suitable.
    One forum suggested this was due to processing time for the queues but its been over 24 hours and users are still not able to resolve/close their own incidents.

    Queues and groups use an database process to stamp work items with queue membership. this process only runs periodically, and is controlled by
    the Group Calc Polling interval. If you waited longer then this interval (which is mesured in miliseconds and defaults to about 30 seconds) then the group calc process has run, and the problem
    is not with unstamped work items. 
    Make sure your group and queue criteria selections are correct. as soon as you switch a role from all work items and assign a group or queue, then that role ONLY applies to items that match that queue criteria that have been stamped by the group calc process.
    If your selection criteria is bad, then no work items would be stamped, and the user would have no access. 

  • How to send "close" message to server when client directly close computer?

    hi~~
    I now have a 9 ppl multiplay game with Socket connection. The clients can sucessfully send a message to server whey they close the game down through pressing X button,but they cant send message when they directly close computer.
    I want to know how to make so available?
    thank

    Whenever we put our computer off directly(like power
    failure), there is no way to inform other computer
    about this mishap. Now it's responsibility of server
    to judge this scenario. In case of sockets, whenever
    we try to write or read from socket whose connection
    is broken, exception is thrown. No. TCP does not work like that.
    If you read from a socket and the other computer aborted the connection, then either the read will timeout (if a read timeout is set) or block forever.

  • Archive messages from external entity?

    Hello,
    Environment:
    GroupWise 2012 SP2 / SLES11 / OES11
    Would it be possible to setup a scheduled task that will archive (not delete) messages from an external entity mailbox?
    In addition, could I run a scheduled task that deletes messages from the archive as well?
    Thanks,
    Armand.

    On 17.07.2013 12:26, voigt-travel wrote:
    >
    > Hello,
    >
    > Environment:
    > GroupWise 2012 SP2 / SLES11 / OES11
    >
    > Would it be possible to setup a scheduled task that will archive (not
    > delete) messages from an external entity mailbox?
    >
    > In addition, could I run a scheduled task that deletes messages from
    > the archive as well?
    Yes and no. However, first realize that archiving is a *pure* client
    function. Without a (permanently) running groupwise client somewhere,
    the answer is no.
    CU,
    Massimo Rosen
    Novell Knowledge Partner
    No emails please!
    http://www.cfc-it.de

  • After Update: Dropping Calls, Phone freezes, and more Force Close messages

    Hey everyone,
    Just wondering if there is anyone else who has noticed after the update that there has been more dropped calls? Do you chalk it up to the phone trying to switch between 3g and 4g? I normally have my phone on the wifi setting (free wifi on my college campus---saves using my data). Also I've noticed recently that the phone will tend to freeze up once in a while to the point where I have to shut the phone off and reboot.  Also I have been getting more error messages using most (if not all) my applications [Pandora, facebook, games] with the only option to force close the program.
    Is there any solutions to these annoying little problems? Trying to have a conversation on the phone is virtually impossible without the connection being dropped (have a record of 6 dropped connections in one conversation).
    Any help would be appreciated!

    Hi SV23:
    You've listed a number of issues that you are experiencing after the software update, and I would like to help you resolve them.   If the force closes seem random, it's likely due to some corruption of the software post-update. Most people can resolve software-related issues via a factory reset.  This rules out all of the applications that could possibly cause conflictions with the device.  If the phone force closes after a master reset and there are no apps on it, we may need to look into replacement options for the device. You can contact the warranty center directly at 866-406-5154. 
    Please list any troubleshooting steps that you've completed, and post any updates.
    Thanks,

Maybe you are looking for