Close Open PR Line Items

Hi ,
There is a PR with 2 line items.
Line Item 1 qnty is 100
Line Item 2 qnty is 25
A PO has been created with reference to above PR
For Line Item 1 qnty is 50
For Line Item 2 qnty is 15
GRN has been done for the above PO.
Now it has been decided that no further processing will happen. ie No Goods receipt will happen.
Now Open PR for
Line Item 1 is 50
Line Item 2 is 10
Now I would like to Close this PR for both line items so that no further PO is made from this PR.
As everyone suggested, in ME52N, quantities / Dates Tab and then tick Closed .
The above steps have already been tried, only after which i have posted the issue.
The closed tick is deactivated.
Any other solution apart from the above solution is appreciated.
Regards,
Karthik

Similar Messages

Open AUC Line Items

Hi
My requirement is to upload the legacy open AUC line items into the new system. For this we are writing a ABAP program. I could find all the AUC line items in the Table ANEP. But my requirement is to extract only the open AUC line items and not all.
Can any suggest the Table in which I could find the open AUC line items ?
Requirement is critical and thank you in advance.
Gemini

My requirement is not to find whether the given AUC is deactivated or not. I would like to extract the line items which are open in all the AUCs for uploading this as cut over data into the new system.
As I have mentioned in my question I could find all the line items (settled + not settled) of AUC in ANEP table, but I want to know if there is any Table which stores only the unsettled AUC line items.
Thank you
Gemini

How to identify open schedule line item?

Hi,
I have a requirement for identifying open schedule line items. I want to identify any indicator or any field in any table which will tell me that the schedule line item is complete. Can anyone tell me how can I know that?
Ex. Sales Order 1 has 3 materials (line items) in it A, B & C.
For A the quantity is 10 and for which 3 schedule line have been created.
Out of the 3 schedule lines, 1 schedule line item is complete that is the delivery has been done and the rest 2 are open.
For B and C there are 4 & 5 schedule lines created and all are open.
How can i identify that total 12 schedule line 1 is completed and 11 are open.
Please suggest tables, field names / indicators.
Regards,
Vishal

Hi Vishal,
You can not identify the open line items directly, rather you have to calculate the delivered quantity and copmare it with the ordered qty for each line item. The ordered qty can be idenitfy from the table VBEP and the deliverd qty can be found out by calling the function RV_SCHEDULE_CHECK_DELIVERIES.
Follow the link for more details to calculate the delvierd qty.
http://scn.sap.com/thread/279862
Rgards,
Rutvik.

Open vendor line item conversion

i have to upload "AP-open vendor line item data" through LSMW
Tcode: FB01
is their any direct function module /BAPI available?
Thanks & Regards.
Avijit Khajanchi.

We have LSMW   Direct Input method
Object               0100   Financial documents
Method               0000
Program Name         RFBIBL00
Program Type         D   Direct Input

How to find the open po line item by using EKKO &EKPO tables

Hi Gurus,
what i am doing is finding out the OPEN PO line item from EKPO table. I know it has to check the ELIKZ field from the EKPO table.Can you please clarify me on the same in more detail.I has to use the ELIKZ EREKZ fields from EKPO table.

Use the field ELIKZ in EKPO. If the field is Blank its an OPEN PO Line Item
refer this link.
How to open PO line item

How to open PO line item

how to find out
OPEN PO line item
by using EKKO & EKPO table

Nilesh,
Check this post
Open PO's
Reward if this helps,
Satish

Standard object for open ar line items charge backs

Hello there,
can any body tell me whether any standard object exists for open AR line Items Charge Backs.
Regards
Janapathi

Hi,
As per my knowledge, there is no standard object available for AR neither for AP.
Thanks & Regards,
Sandip Kamdar

Error when posting Open AR Line Items

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Hi Priya,
As you are using the Idoc method, is the Partner profile correctly defined.
Please could you elaborate your error in a bit more detail.

Close Open sale order items

Hi,
We have a business scenario of one sales order --> one delivery document. Any items which have not been confirmed for delivery need to be closed out so that they do not show up as open requirements.
One way is to reject the open line items. However, rejection reduces the original customer sales order value.
Is there any other way that the open sales order line items can be changed in status so that the pricing is intact, but the item is closed out ?
Would appreciate inputs from the forum
Thanks

Hi
In standard itself this can be achieved
In t code OVAG itself for your reason of rejection if you maintain BLANK in the statistical column
Then those rejected values will not be reflected in sales order
Suppose a sales order contains three materials say
Material A qty 3 units
Material B qty 3 units
Material C qty 2 units
Each and everything is priced as 10 US dollars
then the nett value of this order will be 80 US dollars
Suppose if you reject Material C qty 2 units with a reason of rejection by maintaining the settings that i mentioned above the sales order value still Will be 80 US dollars and will not become 60 US dollars
This is what you are looking for (i hope so)
Please try this
Regards
Raja

Non Deduction of TDS in Case of Open Credit Line Items in GR/IR account

Dear Experts,
I would like to request you to please give ur suggestion/advise in the below issue:-
In our earlier legacy system(oracle) we used make provision entry based upon the activity done & certified by respective non finance dept by(against which vendor invoices are not received before month closing):-
On the last day of the month:-
Handling Exp    Dr
Ware House Exp Dr
Other many Exp Dr
Current Liab & Prov A/c Cr
As per IT dept we have to deduct TDS at the time of crediting the vendor or any other suspense a/c and deposit it by next month by 7th day . To avoid non deduction of TDS against such provisional expenses we used to reverse the same entry on the 1st of next month:-
Current Liab & Prov A/c Dr
Handling Exp     Cr
Ware House Exp Cr
Other Exp           Cr
Now in SAP we r not doing manual entries like above:-
The entries are huge and so many Exp get debited & GR/IR A/c get credited. Thus there is a very much possibility that the IT person or IT Auditor treat it(GR/IR) as suspense a/c and can give comments on his report about non deduction/deposition of TDS.
In SAP there is an option to transfer all these credit open items into an clearing a/c and reverse it in the 1st of next month. But that time entry will be a sunder:-
On the last date of the month
GR/IR Account   Dr
C/L Prov Clearing A/c Cr    (It will be created)
On the first date of the month
C/L Prov Clearing A/c Dr
GR/IR Account           Cr
But again C/L Prov Clearing A/c can be interpreted as a supense A/c.
We need entries like under:-
On the last date of the month let all credit open item of GR/IR as it is.
On the first date of the next month all Credit Line items document to be reversed and again reposting of same on the same day.
I,e all Exp to be credited
     All GR/IR to be debited
(Revarsal of all open GR/IR credit line items) on 1st of next month
On same day again the original entries which are reversed to be created
All Exp to be deited
All GR/Ir to be credited.
Whether above is possible, if not then how other companies in India are handling the issue.
Regards,
Alok

Dear ,
Try t-code J1INPR and J1INUT for the same as per below explanations.
Regards,
Kalpik

Deleting The Open STO Line Items...........

Dear Friends,
I am having one requirement as follows.
The program is to build in such a fashion , that if there are any open items in STO
ie. In one STO there are 3 items having 100 , 200 , 300 quantities...
First item 10 .. quantity 100..... PGI Done for 100 ( balance Nill )
Second Item 20... quantity 200..... PGI Done for 100 ( Open Deliv / Shipment ) - (100 ).. Then system has to mark for deletion for ( open deliveries and Shipment cost , Handling unit ).........
Third item 30 -
quantity 300...( Open Deliveries 300 ) ..Then system has to mark for deletion for ( open deliveries , and PO line item )
How we can approach to this solution...
Is there anyBAPI available or LSMW for each phase we have to consider or BDC..
Thanx and Regards,
Amitav

Hi Rajesh,
I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
Check the following links:
For Archiving
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

Cancelation of partial line items in the MBST is not opening the delivery

Hi Gurus,
We are posting the GR with 503 mvt type with ref to delivery. In this process when some of the line items have to be returned, we are posting MBST against those line items. To cancel / reverse the same in delivery using VL09, system (does not re-open those line items) is not allowing us to cancel partial line items. Instead the entire delivery is being cancelled.
The problem to cancel / reverse the entire delivery & material document is some of the line items are are already consumed.
When we cancel/reverse some of the line items using MBST and there by cancel the material documents, system does not allow us to cancel the particular deliveriesdoes not re-open those line items). When we cancel the entire delivery, the link between the original delivery and already consumed materials is lost.
I guess this is Standard SAP behaviour and some one would have encountered with a similar problem.
Request you to check and let me know how to resolve this issue.
Thanks / Sandeep

The MBST is cancellation of material documents or in other word you are cancelling the action whic were carried out earlier.
You might have noticed that when you are using MBST and entering input parameter as material documents system by default will carry all the infoermation which were there in that material documents.
I fyou weants to cancel part of material you can do this in MIGO sereen and select the option of return delivery and saelect the line item which youw wish to send it back or return to vendor.
For partial returns you should always use MIGO, RETURN DELIVERY against MATERIAL DOCUMENT, put in the material document No. and then whichever line you want partially return, you enter the partial quantity and save the document.
Hope this clear.

Reset Cleared Items - for huge number of line items

Hi Everyone,
Is there any way where we could reset cleared items for one clearing document (cleared close to 19000 line items) aside from FBRA? Perhaps another program which can be executed in the background? We are timing out due to the sheer volume of data.
Are there any other options that we can explore?
Thanks and regards,
Joey

Hi Tony,
Unfortunately, it is not an executable program in background when we do SE38. Since it has no selection screens, we cannot setup a variant as well. In FBRA, you are only allowed to hit save as soon as you confirm that you want the clearing reset. It is during this time when we hit the time out.
We have thought of this as well but asking the basis team to extend the time out session would probably be hard to get due to stringent approvals needed.
Thanks for your advise.
Regards,
Joey

Scheduling a job to clear line items

Dear All,
I am receiving lockboxes , I want to know how to schedule a job so that the items in lockboxes gets applied to open customer line items.
best regds
Subha

Hi Subhadeep,
Is your requirement related to Lock Box functionality? if it is related to same you can go through below link.
Lockbox Configuration
If not provide your input for the process you require.
Regards
Pankaj P

Problem in AR Line Item IDOC method

Hello Guys ,
iam migrating open AR Line Items using lsmw Idoc method.when i uploaded the flat file and converted the file .at step 10 display converted data it is not displaying the values for the field net duedate(FAEDN) and amount(BETRW) but when iam processing the idoc ,the values are displayed in data records .can anybody explain what is the reason for this.your valuablae answer is greatly appreciated.
Regards
Janapathi

hi,
to load open ar item , the best method is to use FRBIBL00. you can put in the additional coding logic in begin of processing events.
this will give you good control over the loading as well.
pls reward points if found usefull.
regards
pragya

Close Open PR Line Items

Similar Messages

Maybe you are looking for