Close PO created with Unlimited Delivery option
How can we close a PO where unlimited delivery is allowed? I have to activate this option in PO becasue at the time of receving we always have excess or shortage delivery. And we can not receive the excess quantity if Unlimited Deliver option is not selected in PO.
The problem is I can not close it manualy.. do we have any option?
>
Manish S Jain wrote:
> Hi,
>
> You can control the over delivery tolerance through material master by maintaining purchase value key.
>
> If u wants to close the PO go to delivery tab tick the u201Cdelivery completeu201D and put the latest GR date below it. System will not allow to do GRN after that date.
>
>
> Regards,
>
> Manish Jain
>
> Edited by: Manish S Jain on Apr 12, 2011 9:23 AM
I dont think that putting a latest GR date will close a PO, it will just restrict to post another GR beyond this date.
Similar Messages
-
Using disk created with different security option
Hi
I'm struggling with using my backups / sparsebundle I originally created "With Device Password". I wanted to give my nephew access to my Airport Time Capsule 7.7.2 and changed the disk sharing option to "With Accounts" and set up two accounts. When I went back to Time Machine, I had no access to the previously used disk. But I want to continue using this disk for incremental backups and any potential recovery task.
After reading this http://discussions.apple.com/message/22323537#22323537 and others, I moved the sparsebunde file to my user account disk, replacing the new one created today. However, under System Preferences, Time Machine does not seem to recognise any "Latest Backup". It just displays the remmanent space available. Is it safe to perform a new backup? I'm afraid if I do a new backup this could replace all the content on the original disk or mess things further up. Any full backup would be larger than the space available on the ATC. Hope somebody can give me some input.
Thanks.Wow, thanks LaPastenague. If I had seen the pondini web page I had saved myself a lot of trouble. But I fixed it by miracle. Let me explain:
When I went to Airport Utility, I selected the Disks tab and chose Secure Shared Disks 'With Accounts'. There were no accounts there, not even my proper user account as defined by Mac. So I 'created' them mirroring my nephew's and my MBP's user account details. So I got a new disk as result. The original disk was unaccessible. Scared as I was, I looked in Finder for the Airport TC, made all files visible and found two folders, one called 'Data', the original one, and the new with my user name. Each had a machinename.sparsebundle file and Data still had its own intact. I would make a copy of it, but it was impossible due to its size (1.5TB). Under TM, I could not find / select it anymore. So I went back to Airport, undid the disk sharing 'With Accounts" and reverted to 'With device password'. But then, against any logic, I could not even find the original 'disk' - neither under TM nor in Finder! Next, I reverted Airport to 'With Accounts' sharing, and in Finder I moved the file to my new user folder within Airport, as I said. After posting my question here I had a phone call and forgot to disable TM! When I came back to my MBP TM was backing up... just an increment! So I guess I was saved by chance. I had some important backups I luckily could save and are still there.
I hope this helps others with the same issue. But I recommend to have a look at the Pondini's guide before messing with any settings in Airport / Time Machine. I found I can't use intuituon with Airport as I do with Macs. They seem to be different philosophies in spite of being both Apple. I learnt my lesson. The good thing is that, for whatever reason, 'with accounts' Airport and TM seem now to work more smoothly. -
Delivery created with 0 quantity
Hi,
We have scenarion in which the delivery was created with 0 quantity.
I am creating delivery using transaction VL10D. Even though there is no available stock, delivery was successfully created with 0 delivery quantity.
Is this issue with material master or issue with Material availablity check.
Regards,
ShahuDear,
Basing on the control elements availability check settings in customizing.
System Determines date for availability check on basis of earliest material availability date of all schedule lines in delivery.
If there is insufficient stock the system behaves:
1. Sufficient quantity of material not available by material availability date, a delivery quantity '0' is entered in delivery. If item category of delivery permits '0' quantity then it would be included elese item would not be allowed in delivery.
2. Quantity available of material is lower than order quantity, system would enter available quantity as delivered quantity and order would get updated accordingly. If partial delivery is not allowed, this would be noted in delivery log.
Regards,
Syed Hussain. -
Excise capture not possible if GR is created with ref to STO
Hello
We are created the STO with two step, created the delivery and goods issue and afterwords created the Billing.
Now we are created the GR with ref to Outbound delivery, then system will copy the Outbound delivery number in Delivery note field. so it means that the perticular GR is created with erf to outbound delivery.
if suppose in same cases stores person created the GR with ref to STO (forget to give outbound delivery) then system is allow us to do the GR, now the Delivery Note number is option one..we can enter any value or number. after this while capture of excise with ref to GR the system will not allow us to take CENVAT. how to solve this.
How to get the perticular GR is created with ref to delivery or Not.(suppose if choosen is Outbound delivery then Ref number in MKPF is Outbound delivery, if suppose i select the GR with ref to STO then in same delivery number i will enter in Delivery note field, then also MKPF shows same outbound delivery, how to get this perticular delivery is created with ref delivery or STO.
Reason: Most of the STO are there, here stores person created the GR with ref to STO (he should select outbound delivery but he is not selected), now system is not allow us to take CENVAT, how to do , Business they are not ready to reverse the GR bcz the stock is already cosnsumed.
Regards
sapman manHi
When you do GR against the outbound delivery at the recieving plant the system will Pick up the excise duties from the Excise invoice/commercial Invoice created at the supplying plant.In STO there is no provision to input the Excise duty.
The same has happened in your case ,when u are tryin to make GR against STO ,the system fails to fetch the excise data as no excise data is available in Stock transport order
Comming to your second query of what has to be done to previously made GR against STO,follow the steps
1) Go to J1IH -additional Excise
2) Input Material docuemtn,Plant ,Excise group
4) enter the material code ,Duty amount ,quantity ,Chapter ID
3) Post the document
The entries passed in the above case will be through excise transaction type DIEX which will be clearly visible in J2I9
Regards
Sandeep
Edited by: sandeep13 on Oct 23, 2009 3:03 PM -
Email Delivery Option - Simple TEXT Output is coming as an attachment
Hi All,
I am trying to use R12.1.3 feature "Delivery Option" while Submitting Concurrent Program "Payables Open Interface Import" using FND_SUBMIT with email Delivery Option and email is coming with an attachment (Concurrent Program Output).
Email Body is blank (as expected if Output is coming as an attachment), as per documentation if CP Output is in TEXT Format then Email body should show the Output instead of an attachment.
My Question, is if Output is TEXT why it is coming as an attachment, do I need to Configure something?
I am using and it is working fine(not sure if any of the argument is required to Set "SMTP_CONTENT_TYPE",
l_ret := fnd_request.add_delivery_option
(type => FND_DELIVERY.TYPE_EMAIL
,p_argument1 => 'Quick Invoice to Workbench Transfer Details' -- Subject
,p_argument2 => '[email protected]' -- From
,p_argument3 => l_email_add -- To
,p_argument4 => '[email protected]'); -- CC
In Java Based Concurrent Program example, I foudn this line, not sure how to do that using PL/SQL
req.addProperty(DeliveryPropertyDefinitions.SMTP_CONTENT_TYPE, "application/pdf");
Please Help.
Regards
SachinHello Kamath,
Have you set PARAMETER6 to true or false?
http://docs.oracle.com/cd/E28280_01/bi.1111/e22258/add_burst_def.htm#CHEJDGAG
Please send us your bursting query so we can check it.
For more info on this, please review section 7.3 Adding a Bursting Definition to Your Data Model
from Fusion Middleware Data Modeling Guide for Oracle Business Intelligence Publisher
http://docs.oracle.com/cd/E28280_01/bi.1111/e22258/add_burst_def.htm#BIPDM347
Bogdan -
Passing Delivery option to child concurrent request
hi, we have a concurrent request(parent) using SQL to call a new concurrent request (child),
Since if we run the parant with email delivery option , the parent call the child to execute. But the email sent the parent output, we actually want the child's output.
So I would like to ask can passing the delivery option from parent to child in the SQL?
Any sample for references?
Many thanks.user572941 wrote:
I am using forms personalization to give the user the ability to submit a concurrent request from the 'Actions' menu of the form. I would like to be able to pass a field from the form to a parameter of the concurrent request. I know how to set a global variable using forms personalization. Does anyone know how I could use this variable as the default value for the parameter in the concurrent request? (e.g. The concurrent program uses PO number as a parameter - I'd like to be able to pass the PO number from the form to the concurrent request.)Please see if old threads (which discuss the same topic) help -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Forms+AND+personalization+AND+Parameter&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Dummy line item created with TATX item category in outbound delivery
Hi Experts,
We are using a custom transaction YLE_VL10 to create deliveries. Now the problem is when delivery is created, a dummy line item is created with item category TATX and zero qty which causes a problem while creating invoice.
Can anybody of you suggest what could be the reason for this? or how can it be prevented?
Thanks
RPHi Laxmi/Prakash,
I have checked 0184, it looks fine from that point of view.
We already suggested this check qty field to be as 'B' before. but our client says their shipping is critical and they have immediate next day shippings and so on. So at that time, if it does not allow to create delivery, then this option affects their business which is why they dont want to implement this workaround.
Hence we are searching for any other possiblity as of now and hence looking forward for ur replies.
Thanks
RP -
Unlimited Delivery Indicator in relation with Default values in MIGO screen
What is the relation of 'Unlimited Delivery Indicator' in PO with 'Porposed All Items Indicator' in Default Values of MIGO?
Case:
PO created with quantity 100. GR is done for 100 quantity. If 'Porposed All Items Indicator' is set system allows to receive more than PO quantity in GR.
Its behavior is same as Unlimited Delivery Indicator in PO.'Porposed All Items Indicator' Indicates that items with quantities of zero are also suggested upon goods receipts with reference to purchase orders.
use:No more goods receipts are expected for items that have a quantity of zero, but they are possible. Items with quantities of zero may occur after partial deliveries or reversals, for example.
You can set this indicator if you often have to enter additional quantities to purchase order items that are already completed.
'Unlimited Delivery Indicator' the delivery quantity is not limited
Regards,
Pramod -
I'm having a MAJOR problem placing PDF files in InDesign CS4...
When I try to place a PDF that has been created in Distiller, the ONLY import options I can choose are CROP and MEDIA. I need it to crop to the TRIM, but that option is grayed out. The PDFs I'm trying to place were created in-house, and converted from Post Script files to PDFs using Distiller. We use PDF/X-1a equivalent settings when creating our PDFs.
If I export the file as a PDF and then try to place it into a CS4 file, I am able to select Trim as an option.
ALSO, if I open the Distiller PDF in Acrobat and then save it (without changing anything), I am able to select Trim as an option. A workaround I have found is to open all of the PDF files in Acrobat, save them to my desktop, and then save over the ones I need to place. Here's the problem with that: I work for a publishing company, and need to place hundreds of ads for each issue of our publications, and it adds a lot of time if I have to go and re-save everything just to be able to place all the ads.
Does anyone know how to fix this problem? I need to get this figured out so we can use CS4 for all of our publications again. -- We've gone back to using CS3 until I can get this figured out...
- ValerieSteve,
Thanks for the reply, but my PDFs all have trim boxes on them. If I try to place the same PDF in InDesign CS3, it gives me Trim as an option. Also, if I open the PDF and save a copy to my desktop, I am able to select Trim as an option when placing the PDF, and I didn't change anything about it.
I've been trying to see if it's something with the Print Preset settings I'm using, but I can't find anything that seems like it would affect how InDesign would read the Trim area of the PDF.
I've attached 2 PDF files. One that was created with Distiller, and one that was exported from InDesign CS4. The Distiller one doesn't show Trim as an option in CS4, but the exported one does.... but they started out as the same ad. Ugh! Help me please!
- Valerie -
Creating a FLV video player with full screen option
> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3258016930_5977304
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi!
I am trying to create a video player that will allow full
screen functions
like what we can see on youtube. I know how to create the
window and the pop
up but the only problem I am having is having the original
video in the
small screen to pause or go silent when the full screen mode
is activated.
How can get it done?
Thank you.
°K.
--B_3258016930_5977304
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Creating a FLV video player with full screen
option</TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Arial"><SPAN
STYLE=3D'font-size:12.0px'>Hi!<BR>
<BR>
<BR>
I am trying to create a video player that will allow full
screen functions =
like what we can see on youtube. I know how to create the
window and the pop=
up but the only problem I am having is having the original
video in the sma=
ll screen to pause or go silent when the full screen mode is
activated. How =
can get it done?<BR>
<BR>
Thank you.<BR>
<BR>
<BR>
<B>°K.<BR>
</B> </SPAN></FONT>
</BODY>
</HTML>
--B_3258016930_5977304--Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Hello.
During developing Domain Index for Oracle 11.2.0.1.0 (problem also appears in 12с) i was faced with misunderstanding of parameter types of function
ODCIIndexInsert in case of creating indextype WITH ARRAY DML option
According to Oracle documentation
http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/ext_idx_ref.htm#i76892
In case of WITH ARRAY DML option Oracle will invoke ODCIIndexInsert with following signature
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
RETURN NUMBER
In my case indexed column has datatype NUMBER so i defined varray_of_column_type as SYS.ODCINumberList
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER
Indextype was created as
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
or
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
(problem occurs in all cases)
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
When attempting to insert data in the table
insert into test_table values (1);
oracle raise exception
Error starting at line 53 in command:
insert into test_table values (1)
Error at Command Line:53 Column:1
Error report:
SQL Error: ORA-29925: cannot execute SCOTT.INDEX_METHODS.ODCIINDEXINSERT
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
29925. 00000 - "cannot execute %s"
*Cause: The specified function does not exist or does not have an
appropriate signature.
*Action: Implement the function with the appropriate signature.
So my question is.
Is it normal behavior of oracle (according to documentation)?
What is correct signature of ODCIIndexInsert function in case of INDEXTYPE creation with 'WITH ARRAY DML' option and fact that indexed column has NUMBER datatype?
By the way if i define indextype without 'WITH ARRAY DML' option signature is clear, and working. But this approach doesn't satisfies our performance needs.
Also if i define index type with option 'WITH ARRAY DML WITHOUT COLUMN DATA' and use signature
static function ODCIIndexInsert(ia sys.odciindexinfo, ridlist sys.odciridlist, env sys.ODCIEnv) return number
Everything works too. But this approach doesn't satisfies our business needs.
Is it a way to define ODCIIndexInsert parameter types (in case of indexing number column) so that batch inserting works according to documentation ?
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
I am attaching full sql script to recreate environment and reproduce the problem.
Type definition:
CREATE OR REPLACE TYPE index_methods AS OBJECT
step number,
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
CREATE OR REPLACE TYPE BODY index_methods IS
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
BEGIN
ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
RETURN ODCIConst.Success;
END ODCIGetInterfaces;
STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexCreate;
STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexDrop;
STATIC FUNCTION ODCIIndexAlter (
ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2,
altopt NUMBER,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexAlter;
STATIC FUNCTION ODCIIndexUpdPartMetadata(
ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexUpdPartMetadata;
STATIC FUNCTION ODCIIndexExchangePartition(
ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexExchangePartition;
STATIC FUNCTION ODCIIndexInsert(
ia sys.ODCIIndexInfo,
ridlist sys.ODCIRidList,
newvallist sys.ODCINumberList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexDelete(
ia SYS.ODCIIndexInfo,
rid VARCHAR2,
oldval number,
env SYS.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexUpdate(
ia SYS.ODCIIndexInfo,
rid VARCHAR2,
oldval number,
newval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexStart(
sctx IN OUT index_methods,
ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo,
qi sys.ODCIQueryInfo,
strt number,
stop number,
cmpval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
sctx := index_methods(1);
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexFetch(
self IN OUT index_methods,
nrows NUMBER,
rids OUT SYS.ODCIridlist,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
end;
Problem workaround:
--drop function test_eq_fun;
CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
BEGIN
IF a = b then
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
--drop operator test_eq;
CREATE OPERATOR test_eq
BINDING (number, number) RETURN NUMBER
USING test_eq_fun;
--drop indextype test_index_type;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
--drop table test_table;
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
insert into test_table values (1);I get single for 1 row and batch for 2 or more rows in the following simplified simulation.
SCOTT@orcl12c> DESC SYS.ODCINUMBERLIST
SYS.ODCINUMBERLIST VARRAY(32767) OF NUMBER
SCOTT@orcl12c> CREATE OR REPLACE TYPE index_methods AS OBJECT
2 (
3 step number,
4 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
5 STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
6 STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
7 STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
8 STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
9 STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
10 STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, rid in VARCHAR2, newval in NUMBER, env in SYS.ODCIEnv) RETURN NUMBER,
11 STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in your_type, env in SYS.ODCIEnv) RETURN NUMBER,
12 STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
13 STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
14 STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
15 op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
16 MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
17 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
18 );
19 /
Type created.
SCOTT@orcl12c> CREATE OR REPLACE TYPE BODY index_methods IS
2 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
3 BEGIN
4 ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
5 RETURN ODCIConst.Success;
6 END ODCIGetInterfaces;
7
8 STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
9 BEGIN
10 RETURN ODCIConst.Success;
11 END ODCIIndexCreate;
12
13 STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
14 BEGIN
15 RETURN ODCIConst.Success;
16 END ODCIIndexDrop;
17
18 STATIC FUNCTION ODCIIndexAlter (
19 ia sys.ODCIIndexInfo,
20 parms IN OUT VARCHAR2,
21 altopt NUMBER,
22 env sys.ODCIEnv)
23 RETURN NUMBER IS
24 BEGIN
25 RETURN ODCIConst.Success;
26 END ODCIIndexAlter;
27
28 STATIC FUNCTION ODCIIndexUpdPartMetadata(
29 ia sys.ODCIIndexInfo,
30 palist sys.ODCIPartInfoList,
31 env sys.ODCIEnv)
32 RETURN NUMBER IS
33 BEGIN
34 RETURN ODCIConst.Success;
35 END ODCIIndexUpdPartMetadata;
36
37 STATIC FUNCTION ODCIIndexExchangePartition(
38 ia sys.ODCIIndexInfo,
39 ia1 sys.ODCIIndexInfo,
40 env sys.ODCIEnv)
41 RETURN NUMBER IS
42 BEGIN
43 RETURN ODCIConst.Success;
44 END ODCIIndexExchangePartition;
45
46 STATIC FUNCTION ODCIIndexInsert(
47 ia sys.ODCIIndexInfo,
48 rid VARCHAR2,
49 newval NUMBER,
50 env sys.ODCIEnv)
51 RETURN NUMBER IS
52 BEGIN
53 dbms_output.put_line ('single');
54 return ODCIConst.Success;
55 END;
56
57 STATIC FUNCTION ODCIIndexInsert(
58 ia sys.ODCIIndexInfo,
59 ridlist sys.ODCIRidList,
60 newvallist your_type,
61 env sys.ODCIEnv)
62 RETURN NUMBER IS
63 BEGIN
64 dbms_output.put_line ('batch');
65 return ODCIConst.Success;
66 END;
67
68 STATIC FUNCTION ODCIIndexDelete(
69 ia SYS.ODCIIndexInfo,
70 rid VARCHAR2,
71 oldval number,
72 env SYS.ODCIEnv)
73 RETURN NUMBER IS
74 BEGIN
75 return ODCIConst.Success;
76 END;
77
78 STATIC FUNCTION ODCIIndexUpdate(
79 ia SYS.ODCIIndexInfo,
80 rid VARCHAR2,
81 oldval number,
82 newval number,
83 env SYS.ODCIEnv)
84 RETURN NUMBER AS
85 BEGIN
86 return ODCIConst.Success;
87 END;
88
89 STATIC FUNCTION ODCIIndexStart(
90 sctx IN OUT index_methods,
91 ia SYS.ODCIIndexInfo,
92 op SYS.ODCIPredInfo,
93 qi sys.ODCIQueryInfo,
94 strt number,
95 stop number,
96 cmpval number,
97 env SYS.ODCIEnv)
98 RETURN NUMBER AS
99 BEGIN
100 sctx := index_methods(1);
101 return ODCIConst.Success;
102 END;
103
104 MEMBER FUNCTION ODCIIndexFetch(
105 self IN OUT index_methods,
106 nrows NUMBER,
107 rids OUT SYS.ODCIridlist,
108 env SYS.ODCIEnv)
109 RETURN NUMBER AS
110 BEGIN
111 return ODCIConst.Success;
112 END;
113
114 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
115 BEGIN
116 return ODCIConst.Success;
117 END;
118 end;
119 /
Type body created.
SCOTT@orcl12c> CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
2 BEGIN
3 IF a = b then
4 RETURN 1;
5 ELSE
6 RETURN 0;
7 END IF;
8 END;
9 /
Function created.
SCOTT@orcl12c> CREATE OPERATOR test_eq
2 BINDING (number, number) RETURN NUMBER
3 USING test_eq_fun
4 /
Operator created.
SCOTT@orcl12c> CREATE INDEXTYPE test_index_type
2 FOR
3 test_eq(number, number)
4 USING index_methods
5 WITH ARRAY DML(number, your_type)
6 WITH LOCAL RANGE PARTITION
7 WITH SYSTEM MANAGED STORAGE TABLES
8 /
Indextype created.
SCOTT@orcl12c> CREATE TABLE test_table (id NUMBER (19,0))
2 /
Table created.
SCOTT@orcl12c> CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type
2 /
Index created.
SCOTT@orcl12c> insert into test_table values (1)
2 /
single
1 row created.
SCOTT@orcl12c> insert into test_table
2 select 2 from dual union all
3 select 3 from dual
4 /
batch
2 rows created.
SCOTT@orcl12c> insert into test_table select deptno from dept
2 /
batch
4 rows created.
SCOTT@orcl12c> insert into test_table select object_id from user_objects
2 /
batch
34 rows created.
SCOTT@orcl12c> -
Credit memo to be created with reference to return delivery
Dear Gurus,
We have a requirement for mapping return process
Credit memo to be created with reference to return delivery (instead of with reference to return order)
Following issue faced in mapping the same:
Billing document No. 1234 dated 25.03.2010 where there is 4% VAT.
when we are creating return order with reference to billing document 1234
4% VAT is calculated since the Service Rendered date is 25.03.2010 (Copied form Billing document)
return delivery is created today 08.04.2010. (VAT revised to 5%)
when credit memo is created with reference to delivery document
VAT is calculated 5% which is applicable from 01.04.2010
since the service rendered date is appearing in billing document
08.04.2010 (the date of Post Goods Receipt).
The VAT should be actually 4% in Credit Memo.
regards,
Rajesh TIn the copy controls from delivery to Invoice, at the item level try to use pricing type C and Pricing source Blank ( Blank is order).
If it doesnt work , then you might have to go for a requirement routine for this Tax , based on the document category that is being processed, read the tax from the originating order.Assign the routine to tax condition in the pricing procedure.
Regards
Sai -
Control over qty in outbound delivery created with reference to P.O
Dear Gurus,
I am trying to create a outbound delivery document with reference to the purchase order. But, the system is allowing more
quantity in delivery document than in purchase order. How to control it.
Regards,
KrishnaHi,
You can control this through item category fetched in delivery. Please check whether you have set error message or note about situation for overdelivery under following customization path;
SPRO>>Logistics Execution>>Shipping>>Deliveries>>Define Item Categories for Deliveries
Here for your relevant item category, check under quantity table the entry maintain under 'Check Overdelivery'
You can set it as A- So that user get the note of the situation or B- so that it gives error message.
Regards,
Udaya. -
I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.
launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8 -
we r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed, 10gb RAM.no stills are there.there are hd standard videos
What format are your sources and what are your sequence settings? I'd guess that you're working with h.264 material which is not fcp friendly. If so, use compressor to conver to prores422
Maybe you are looking for
-
HT201335 What if I'm using ios7? How do I stream from nbc app to my Apple TV
Using ios7 want to watch nbc app on Apple TV, how do I do it?
-
Is there a way to make a collapsible panel with only CSS?
I am trying to make a drop down menu in my about section check out the pic that are attached for more information. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <title>epec
-
Hi All,I have an iMac 24'' 2007 and my HDD has gone bad.
Hi everybody ... I am in desperate need of help,concerning the replacement drive! All I find on Amazon,for example,are SATA III drives,and my iMac,being quite old,has SATA I,I suppose?! My question is ... will my machine recognize the SATA III drive,
-
Quantity variance in Invoice Vs. Three way match in PO
Hi Experts, I am not able to find any differrence between quantity variance Vs. Three way match in PO. For example in our purchase orders for all the items we are having Two way match (PO-Inv, GR-Bsd Inv is not checked) but we have defined quantity v
-
Need info about SXMB_MONI
Hi, Can any give information about SXMB_MONI . How to check the Runtime process of XI.