Close PR after PO creation

Guys -
is there a way we can close a PR after a PO is created against it? Ie - not allow one PR to be used for creating multiple PO's?
Please let me know!
thanks

Rather closing the PR please activate the message as an error
Materials of requisition 32515812 item 00010 alr. ordered in full
Message no. 06076
SPRO_MM_PURCHASING_ENVIRONMENT DATA_Define attributes of system messages
here enter the
version is 00 adn application is 06 and messae 076 make it E

Similar Messages

Alert "Power sub-system degraded or failed" won't close automatically after power restores

we have SCOM R2 and HP server in use.
we installed HP server MP.
each server has two power suppliers, one to UPS, one to Commercial power.
but there is always Commercial power outage, after which alert "Power sub-system degraded or failed" will arise.
when power restores, this alert won't close automatically.
Below please find alert properties,
there is no "Aoto-resolve" attribute, I suppose this is the reason why this alert won't close automatically after power restores.
but I want this alert to be closed automatically by SCOM after power restores, could anyone help me?

It looks like this particular alert is generated by a rule, and that rule simply generates an alert whenever certain events are detected in the event log. A rule that alerts on the creation of an event does not have the ability to close based on the
detection of a second event.
If this is the behavior you are looking for you would be best to create your own monitor as opposed to this rule, as you can create a custom monitor that alerts on one event or events and closes when another event or events are logged indicating things are
healthy again.
Once you have your custom monitor setup, you would then want to disable this rule that was built into the hp management pack. You can also look to see if the hp mp has any contact info that you can reach out to and ask for this feature to be included
in the next update of the mp, but for now i think your best option is to create a custom monitor that alerts on one event and closes on another.

Sale order 'value changes' after invoice creation

Experts,
A sale order was created / shipped / invoiced. The invoice did not go to accounting because of credit auth error. We have a procedure to fix it and then release it to accounting (transaction VFX3). All OK until this point.
While fixing the auth error, an user changed the freight condition value in the sale order. Then invoice is released to accounting. Now, the value of freight in order and invoice match. How is it possible to change the value of an invoice after its creation?
Any input would be appreciated.
UV

when the value is changed in the sale order, it would automatically transfer
the new pricing to the existing open SD invoice pending accounting entry??
Certainly not. The control is in VTFL where if you select the billing item category for the combination of your delivery type and billing type, you can see a field "Pricing Type". If you maintain any value other than "B", system will copy the price from sale order to billing and you can, as I said above, can change manually in billing. On the other hand, if you have maintained "B" in the above field, system will not consider sale order price but will check your pricing condition maintained in VK11 which you can check in VK12 or VK13.
thanks
G. Lakshmipathi

SkillBuilders Modal Page... closes immediately after loading

I would like to use the Modal Page plug-in from http://www.skillbuilders.com .*
I installed the two sample applications from their web site with different results:
The employee example works fine.
The example with the modal feedback worked fine yesterday, but today it shrinks (after loading normally) so that I can't see anything but the bar with the window name and the close button.
In my own application it's even worse:
I have links in a table which should open a modal window on click.
I tried several settings, but the only thing that's happening is that the window closes immediately after loading and showing the page for a half a second (or not at all).
Leaving the "Auto-close On Element Selector" empty did not work. The default value "div#success-message" kept coming back until I replaced it with "null". But still no effect.
Does anyone have any idea what could cause this behaviour?
Best regards,
Sabine
The Security Settings for all three applications:
Cache: Enabled
Embed in Frames: Allow

In the meantime I had the problem that the window didn't close at all, but I think I figured it out.
So if the Modal Plug In does not work properly, check the following:
<li>Does every process that should close the window have a 'Success Message' defined?
<li>In the unconditional branch, is "include process success message" checked?
<li>In the dynamic action, is "Auto-close On Element Selector" set to "div.t1success" in the true action?
BTW: The "shrinking problem" described in the first post still exists - in IE. In Firefox, it works fine.
Best regards,
Sabine

Account of the opportunity is not populated after the creation of a task

Hi,
In our project, we are using the Opportunity Object after the creation of a task. Our tasks are always related to an existing account.
I was wondering why when I create an opportunity from a task, the field "Account Name" is not populated by default with the account name related to the task.
Any ideas?
Regards,
Dara
Edited by: user6469826 on 2 août 2011 11:40

Contact an electronics repair shop.

11G table appears to have "No data found" after its creation.

After the creation of the following table I cannot look up the structure of the table when clicking on "find table". Usually there needs not be any data inserted in to the table in order to just view its structure. Is there something wrong?
CREATE TABLE "Tournament _Hands " (
"T_hand_number" NUMBER(10) NOT NULL,
"T_table_number" NUMBER(10) NOT NULL,
"T_time_of_hand" DATE NULL,
"T_no_players_involved" NUMBER(10) NULL,
"T_no_players_limp" DOUBLE PRECISION NULL,
"T_players_raise " DOUBLE PRECISION NULL,
"T_player_3bet" DOUBLE PRECISION NULL,
"T_pot_size" NUMBER(10,2) NULL,
"T_payers_ to_showdown" NUMBER(10) NULL,
PRIMARY KEY ("T_hand_number")
);

1003776 wrote:
After the creation of the following table I cannot look up the structure of the table when clicking on "find table". Usually there needs not be any data inserted in to the table in order to just view its structure. with V10 above was true.
with V11 at least 1 row must have been INSERT into table.

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

PR should not change after PO Creation without Unrelease

Hi,
We want that User cann't change the PR after PO Creation.
For Ex.:- We create a PR with 10 Qty., release it and also create PO with 10 Qty.. Now after PO creation with same qty, no one can change PR (Qty, Purchase Group etc...)..
If User Un-release the PO and PR, then user should be able to change in PR...
Please guide...

Thanks a lot dear..
After doing this, i create a new PR and PO with 10 qty... After PO, i unrelease the PR and change the Qty from 10 to 15 nos..then system shows an error message Requisition already converted into purchase order...
But when we change 10 qty to 5 qty, PR allow the same... I want to insert another check here, that user cann't insert less than qty there... There should also be a Message there in system...
Please guide...

HR ABAP : User Exit after Position Creation

Hi,
We had a requirement of automatic creation of certain Relationships after the creation of position in HR.
Is there any USER EXIT for such cases?
I need an user exit which should get triggered after the creation of the Position.
Can anyone let us know the enhancement name if it exists?
Regards,
<i><b>Raja Sekhar</b></i>

Hi Raja Shekhar,
Chk this link...this might help you out.
http://www.planetsap.com/Userexit_List.htm
Reward points if you find this as a right solution
Regards,
Harini

Forced to close RoboHelp after generating SSLs in order to edit content

I have reported this as a bug, but wonder whether any of you have had similar experiences and, if so, how you resolved it.
Have to close RoboHelp after generating SSLs in order to edit content
Steps to reproduce bug:
Open project from Visual Studio Source Control (Team Foundation Server).
Select a Single Source Layout and generate the output.
Try to edit a topic. The Check Out dialog box says "To modify this document, the files in the list below need to be checked out from version control. Do you want to check out these files."
Click Yes.
Results:
The Cannot Complete Operation dialog box appears. "The files in the list below could not be checked out from version control. Exclusive access to these files is required to modify this document."
Click Close, close RoboHelp, and restart RoboHelp.
Expected results:
The files should be checked out from version control with exclusive access when I click Yes to check them out.
When I look in Source Control Explorer, the file I tried to check out is not even checked out. Even manually locking the file for edit from Source Control does not free the file for editing in RoboHelp.
Thanks.
Carol

''Keep until: I close Firefox''
That's what I use for all cookies. If you start a new session every time you start Firefox, i.e., you don't resume the same session over and over, websites cannot track you 'across sessions' using cookies; you are a new person to them during each session (unless/until you log in).
Note that "Flash cookies" need to be managed separately.
As for this particular site, if you want to spend some time research it, you could install an add-on such as Firebug or the external Fiddler2 proxy. Both will show you each request made by the browser when you load a page. Then you can see which third party sites are involved and if you like make a specific entry to allow them in the Exceptions dialog.
* https://addons.mozilla.org/en-US/firefox/addon/firebug/
* http://www.fiddler2.com/fiddler2/ (more difficult to use for HTTPS sessions)

How to block changes in pr after po creation

We have set up the system messages (06 76 as error). However still it is possible that the user can change the description or add new line item after after the release/po creation. How to prevent this. how to block changes in pr after po creation
do i have to create new system messages if yes then hoe kindly suggest
Thanks.
regards

Dear Goel,
When setting the message 06076 and 06400 as described in the note 385002
to error it is no more possible to create a second purchase order with
reference to the purchase requisition.
See SAP note
315448     ME21N: Referencing a purchase requisition
Regards
V V

PR derelease should not be allowed after PO creation

Dear Friends
I have created a PR, released , then PO is created with reference to PR. After that I came back to me54n and cancel the PR release. As per our Business Practice it should not allow to cancel the PR release after PO creation.
I have maintained message 06 076/06 400 and 06 608 as error message.
The changeability indicator is also maintained as '1' against the release indicator'2'.
I don't want to go for any Badi implementation or user exit. Is there any solution in standard SAP
Thanking you
Tapan

Even I tried this testing but it seems like not working. I this is standard SAp behaviour.
Check this OSS notes 493900
1. Question :
Why can I modify a purchase requisition although I set the changeability of
the release indicator to '1' ('Cannot be changed')?
Answer :
The purchase requisition is not modifiable via a purchasing transaction
like ME52 or ME52N. But it is possible to change the purchase requisition
from any other external application like sales order, planned order,
maintenance order or network.
The Changeability functionality only concerns the purchasing transactions.
This is intended and a new release strategy determination takes place if
there is a modification of the data in the external application.
But logically why the user is cancelling the PR after PO creation? Even if they cancel the PR it doesnt impact the PO which is already created. Even if they cancel and re release the PR and try to create a new PO, system wont allow you to create new PO stating that PR is already ordered. Even though it looks strange but it doesnt harm the procurement.

Why After Vo Creation dynamicall i got the this error ?

Hi Gurus,
After VO Creation dynamically i got this error pl z help us.
**Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = BehCompetenceElementsVoEx; APPLICATION_MODULE = xxhr.oracle.apps.per.selfservice.appraisals.server.BEHVAssessmentsAMEx;**
i am trying create the new VO dynamically .
i am using this code plz help us.
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject ratingvo = (OAViewObject)am.findViewObject("BehCompetenceElementsVoEx");
if ( ratingvo != null ) {
System.out.println("Vo Found VO BehCompetenceElementsVoEx for AM. This means we have re-entered the page" );
else
System.out.println("CAN NOT FIND VO for AM" );
ratingvo = (OAViewObject)am.createViewObject("BehCompetenceElementsVoEx", "xxhr.oracle.apps.per.selfservice.appraisals.server.BehCompetenceElementsVoEx") ;
Regards,
Srini

Hi Ali,
Plz help i am new in these things this is my VO Query ,plz help me how to write the programmatic ........i am trying but unable to retrieve the data plz give me any reference controller.
SELECT pce.competence_element_id, pce.business_group_id, pce.competence_id,
pce.proficiency_level_id, pce.high_proficiency_level_id,
pce.weighting_level_id, pce.rating_level_id, pce.person_id,
pce.enterprise_id, pce.job_id, pce.valid_grade_id, pce.position_id,
pce.organization_id, pce.assessment_id, pce.assessment_type_id,
pce.comments, pce.effective_date_from, pce.effective_date_to,
pce.line_score, pce.attribute_category, pce.attribute1,
pce.attribute2, pce.attribute3, pce.attribute4, pce.attribute5,
pce.attribute6, pce.attribute7, pce.attribute8, pce.attribute9,
pce.attribute10, pce.attribute11, pce.attribute12, pce.attribute13,
pce.attribute14, pce.attribute15, pce.attribute16, pce.attribute17,
pce.attribute18, pce.attribute19, pce.attribute20, pc.NAME,
pc.competence_id AS competence_id1, pc.rating_scale_id,
pc.competence_alias,
DECODE (pce3.TYPE,
'ASSESSMENT', 'DisableCompDelete',
'ASSESSMENT_COMPETENCE', 'DisableCompDelete',
NVL ((SELECT DISTINCT 'DisableCompDelete'
FROM per_competence_elements
WHERE parent_competence_element_id =
pce.competence_element_id),
'EnableCompDelete'
) AS delete_comp,
pce.parent_competence_element_id, prl1.NAME AS prof_level,
prl1.rating_level_id AS rating_level_id1, prl2.NAME AS perf_level,
prl2.rating_level_id AS rating_level_id2, prl3.NAME AS weigh_level,
prl3.rating_level_id AS rating_level_id3, pce.object_id,
pce.object_name, pce1.competence_element_id AS ref1_comp_element_id,
pce1.proficiency_level_id AS ref1_prof_level_id,
pce1.weighting_level_id AS ref1_weigh_level_id,
pce1.rating_level_id AS ref1_perf_level_id,
pce1.comments AS ref1_comments,
pce1.attribute_category AS ref1_attribute_category,
pce1.attribute1 AS ref1_attribute1,
pce1.attribute2 AS ref1_attribute2,
pce1.attribute3 AS ref1_attribute3,
pce1.attribute4 AS ref1_attribute4,
pce1.attribute5 AS ref1_attribute5,
pce1.attribute6 AS ref1_attribute6,
pce1.attribute7 AS ref1_attribute7,
pce1.attribute8 AS ref1_attribute8,
pce1.attribute9 AS ref1_attribute9,
pce1.attribute10 AS ref1_attribute10,
pce1.attribute11 AS ref1_attribute11,
pce1.attribute12 AS ref1_attribute12,
pce1.attribute13 AS ref1_attribute13,
pce1.attribute14 AS ref1_attribute14,
pce1.attribute15 AS ref1_attribute15,
pce1.attribute16 AS ref1_attribute16,
pce1.attribute17 AS ref1_attribute17,
pce1.attribute18 AS ref1_attribute18,
pce1.attribute19 AS ref1_attribute19,
pce1.attribute20 AS ref1_attribute20,
pce2.competence_element_id AS ref2_comp_element_id,
pce2.proficiency_level_id AS ref2_prof_level_id,
pce2.weighting_level_id AS ref2_weigh_level_id,
pce2.rating_level_id AS ref2_perf_level_id,
pce2.comments AS ref2_comments,
pce2.attribute_category AS ref2_attribute_category,
pce2.attribute1 AS ref2_attribute1,
pce2.attribute2 AS ref2_attribute2,
pce2.attribute3 AS ref2_attribute3,
pce2.attribute4 AS ref2_attribute4,
pce2.attribute5 AS ref2_attribute5,
pce2.attribute6 AS ref2_attribute6,
pce2.attribute7 AS ref2_attribute7,
pce2.attribute8 AS ref2_attribute8,
pce2.attribute9 AS ref2_attribute9,
pce2.attribute10 AS ref2_attribute10,
pce2.attribute11 AS ref2_attribute11,
pce2.attribute12 AS ref2_attribute12,
pce2.attribute13 AS ref2_attribute13,
pce2.attribute14 AS ref2_attribute14,
pce2.attribute15 AS ref2_attribute15,
pce2.attribute16 AS ref2_attribute16,
pce2.attribute17 AS ref2_attribute17,
pce2.attribute18 AS ref2_attribute18,
pce2.attribute19 AS ref2_attribute19,
pce2.attribute20 AS ref2_attribute20,
pce3.competence_element_id AS par_comp_element_id,
pce1.TYPE AS type1, pce2.TYPE AS type2, pce3.TYPE AS type3, pce.TYPE
FROM per_competence_elements pce,
per_competences_vl pc,
per_rating_levels_vl prl1,
per_rating_levels_vl prl2,
per_rating_levels_vl prl3,
per_competence_elements pce1,
per_competence_elements pce2,
per_competence_elements pce3
WHERE pce.competence_id = pc.competence_id
AND pce.proficiency_level_id = prl1.rating_level_id(+)
AND pce.rating_level_id = prl2.rating_level_id(+)
AND pce.weighting_level_id = prl3.rating_level_id(+)
AND pc.NAME LIKE 'BEHV%'
--AND pc.NAME is Not Null
AND pce.competence_id = pce1.competence_id(+)
AND pce1.object_id(+) = :1
AND pce.assessment_id = pce1.assessment_id(+)
AND pce1.object_name(+) = :2
AND pce.competence_id = pce2.competence_id(+)
AND pce2.object_id(+) = :3
AND pce.assessment_id = pce2.assessment_id(+)
AND pce2.object_name(+) = :4
AND pce.parent_competence_element_id = pce3.competence_element_id(+)
AND (pce.assessment_id = :5 AND pce.object_id = :6
AND pce.object_name = :7
ORDER BY pc.NAME
Regards,
Srini

"Mail" application "closes unexpectedly" after a few seconds.

“Mail” application "closes unexpectedly" after a few seconds.
I use "Mail 1.3.11" to hnadle my e-mail. It works fine.
This weekend, due to a problem with an address, the server of my University has delivered more than 1000 messages to my account.
When I have opened "Mail 1.3.11" those messages have begun to enter into the "in" mail box. I have stoped it but anyway a good quantity of them have entered.
I have already solved the server issue but now that I want to empty those messages from "Mail 1.3.11" I cannot since the application "closes unexpectedly" a few seconds after opening it without letting me do anything.
How could I open and kept open my "Mail 1.3.11" until I am able to clean it?
Thank you,

[kmosx: Apps unexpectedly quit|http://discussions.apple.com/thread.jspa?messageID=607542&#607542]

Photoshop CC, Flash CC, After Effects CC, Dreamweaver CC all Closes right after opening????

I have tried everything on the forums, but every time i open Photoshop, Dreamweaver, flash, after effects all with CC paid membership closes right after opening them. I have read the forums searched in the internet, update and downgrade the drivers on graphic card, sign in and out the adobe creative cloud, The one thing i notices is that when i open Photoshop in the notifications on my windows, it appears in the notifications that i register my product on adobe with ID but i have entered my Id with billing information an all when i click to continue it goes sign in then back to the address??. And in my products shows i have membership cloud, don't know what to do anymore! I have even uninstall the program and clean everything with adobe cleaning tool. I don't Know what to do!!!

Have you found a solution, I am having same problem

Close PR after PO creation

Similar Messages

Maybe you are looking for