Close PR automatically once Converted into PO

Dear ALl,
Please let me know asnsy setting will be available to get tick automatically once the PR is converted into PO with Full qty.
Is thr any settings will be available in IMG, so that once the PR is converted fully to PO system should automatically tick the Close indicator.
This will help in MRP run.
Pls do the needful.
Regards,
Nagaraj S

Hi Nagaraj S,
The function of Closed Indicator in the PR is, No Further pruchase orders are to be created for this Purchase REquisition
Suppose u created a pR but later on you dont want to create PO for this PR or you want to block Pr for further activity, in that case YOu will use Closed Indicator
By system message you can control when PR is converted in to PO with full Qty. Again If you try to create the PO for same PR in that case system will generate Error message. it will not allow you to create PO.
Settings are : SPRO > Materail Management > Purchasing > Environment > Define Attributes of System Messages >
here 076Materials of requisition & item & alr. ordered in full Indicate as E*
Try ..
Reards,
Vraj

Similar Messages

How to close PR automatically once Contract has been created?

Dear All,
Please help me with this issue. The requirement here is from PR (with WBS Element) --> Contract --> PO (partial payments, total will be contract value which is adopted from PR)
How do i automatically close PR once this PR has been adopted into a contract and saved.

hi
set message 06 076 as error in customization
sproMaterials ManagementPurchasingEnvironment DataDefine Attributes of System Messages
Vishal...

I do not have the ability to edit my .pdf once converted into a word document. Did I purchase the wrong version?

When I covert my pdf into a word document it does not allow me to edit the actual text. I can add random text to the document, not following the format of the document (not aligned, not the same font, etc.). I can add text, but I cannot what is already in a sentence or paragraph.
Did I purchase the wrong version?
Thanks,
Cindy.

Hi cindyjay,
You have the right tool for converting PDF files to Word. For starters, please try triple-clicking in the text block that you want to edit. If that doesn't work, we'll need to take a closer look at how the PDF that you converted was created (did it start out as a scanned document, for example). If it did start as a scanned document, it's important that OCR (optical character recognition) was performed during conversion to convert scanned text to editable text. OCR is on by default when you convert via the ExportPDF website, but can be turned off if you convert via Reader.
If triple-clicking doesn't work, let me know, and then we'll take a closer look at your file.
Best,
Sara

Adobe Reader closes itself automatically

I am using Windows 8.1, Word 2010 and Adobe Reader X. Any time a Word document is opene at the same time the Adobe reader closes itself automatically once the mouse cursor hits the Reader document. What can I do?

Hi,
I would say you are definitely coming up against memory restrictions. There are a couple of posts by John Brinkman that I would recommend.
First I would look at why the form is 6Mb and see if you can reduce this down. For example, select fonts that are already in Reader (like Myriad Pro) and then deselect Embed Fonts in the File > Form Properties > Save Options. Also do not embed images into the form. See:
http://blogs.adobe.com/formfeed/2010/02/big_and_complex_forms.html.
http://blogs.adobe.com/formfeed/2010/09/xdp-size-matters.html.
http://blogs.adobe.com/formfeed/2009/11/linked_vs_embedded_template_im.html.
Next look at your script. You mention loops, so check is your script efficient. For example, use xfa.resolveNodes() once outside of the loop, instead of xfa.resolveNode() inside the loop. Make sure that variables are declared. See:
http://blogs.adobe.com/formfeed/2011/10/script-performance-exercise.html.
http://assure.ly/kUP02y.
Also check for any script that you have in events that fire frequently, like layout:ready event and comment these out. See.
http://assure.ly/nB0Bvz.
The dataset seems very large at 2Mb. Does this include image data? It may be that the user is interacting with the form, while it is still trying to process the XML and the loops.
Hope that helps,
Niall

Avoid further changes in requisition once converted to PO

Hello..
I have a question....
It is possible to avoid further changes in requisition once converted into a PO??
I know that I can controll that via authorization by removing the ME52/ME52N transaction.. but I want to know if there is a way to control that via customizing?

This is Not Possible thru Standard SAP.
You Can Control PR Line Items for Further Processings but You Cannot Control Users to add New Line items in PR.
Try the Following Enhancement on PR
MEREQ001 Customers' Own Data in Purchase Requisition
You can use this enhancement to:
o   Maintain/supply your own customer fields in purchase requisitions
o   Update your own customer-specific tables
o   Change standard fields to a limited extent

HT1202 How do i change the computer for my iphone? it says iphone will syn automatically once it is plugged into "DUCH..." (not my computer name) . what should i do to change that?

How do i change the computer for my iphone? it says iphone will syn automatically once it is plugged into "DUCH..." (not my computer name) . what should i do to change that?

Connect your phone to iTunes and in the Summary pane, hit the "Sync with this iOS device over Wi-Fi"
http://support.apple.com/kb/PH2560

Problem in converting into upper case urgent

hi,
i working on module pool program.
in the initial screen there is two fields one is number one is name.
if i enter the name in the name field it is automatically converting into upper case,
but in this case my select query is not working,how to solve this,i mean i have to take same as it is what i entered.
kindly give me suggestion.it is urgent issue.i have to delever today.
Thanks,
mohan.

hi
in the Report to handle like this situation.. we use the extentions to the parameter as LOWER CASE .
parameters p_t type char10 LOWER CASE .
i think in the Module pool also.. we can do this in Properties of the FIELD... once check the Properties of the field... there could be a chance.
hi
<b>there is field <b>checkbox called UPPER/LOWER CASE</b>at the bottom of the properties... if tick this u r porblem will be solved</b>
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
Naresh Reddy

My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?

Good evening dear experts,
i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
No if i
1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
In both cases i want to
my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
WITHOUT asking me "save as" + "opening of the file".
Is the possible, and if yes, HOW ?
A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
Thx and greetings from Germany,
Julia

We are nearly there!
A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
2 problems:
1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
B] - "the automated solution"- @Sandeep:
i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
1 question regarding this: are the subfolders also affected?
As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
Do you have an idea how can i solve this?
Now we are very near to the end-solution of my goal:
i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
So if we could solve this, i would be a completely happy girl
Guys, you are great, thx again for the whole struggle with my concerns!!

How to trace planned order data after it has been converted into production

Hi, There,
The planned order has been converted into production order.
However, I need to trace if this planned order is generated by MRP
run or created manually. I can't get any planned order info from
table PLAF. Any input?
Regards,
Nancy

Hi,
Once fully converted, the Planned Order data will not be available in the Table : PLAF.
If it is available, then You can have the details with the Time Stamp and User data from PLAF.
But, the refrence will be available in the Production Order.
You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
This is how most of the Organizations keep a track of the Planned order data.
Hope this helps..
Regards,
Siva

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cu

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cut file and an etch file?

Thanks. I might use it soon...
Does it automatically make folders named after the volume labels? And does it handle the conversion of spaces and non-alphanumeric characters to octal codes?
I could read the script but it would be faster for everyone reading, if you leave the answer as a reply.
I also think that there should be some major work done on modernizing the fstab, either by replacing it with a better implementation of file system mounting or changing the file structure and adding in better handling of non-alphanumerics. I don't want to have to look up a stupid octal table every time I type in my labels.

How do I stop Numbers formulas from converting (/) into (÷) for hyperlinks. Ref Ver. 3.5.2

How do I stop Numbers formulas from converting ( / ) forward slash into (÷) divide for hyperlinks. Ref Ver. 3.5.2
I am trying to hyperlink to a dropbox url, but the numbers formula is automatically converting / into ÷, preventing the links from working.
Thank you.

Hi Merritt.B,
If you are using HYPERLINK() everything goes inside quotes:
HYPERLINK("https://discussions.apple.com/thread/6772428","This question")
quinn

Is there a terminal command that will close quicktime player once a video is finished?

I'm running a python program that uses subprocess.call(['open', '-a', "Quicktime Player", filename]) to open a video and defaults write com.apple.QuickTimePlayerX MGPlayMovieOnOpen 1 starts it automatically. I'm wondering if there's a terminal way or a python way to close the video once it's finished.

Hi, Thanks for the reply, I appreciate it.
What do you mean by "pick up"?
I mean to show what the DNS numbers are that the router is using.
They are not entered in the DNS server field in Networks, TCP/IP tab.
If you mean refresh the client settings, the DNS settings are obtained as part of the DHCP lease (or PPP connection in the case of PPP).
The user/ OP is actually using PPPoA, when i googled PPPoA.. seems he is using Cisco perhaps.
http://en.wikipedia.org/wiki/Point-to-PointProtocol_overATM (Asynchronous Transfer Mode)
"PPPOA or PPPoA, Point-to-Point Protocol (PPP) over ATM, is a network protocol for encapsulating PPP frames in ATM AAL5. It is used mainly with cable modem, DSL and ADSL services.
It offers standard PPP features such as authentication, encryption, and compression. If it is used as the connection encapsulation method on an ATM based network it can reduce overhead slightly (around 0.58%) in comparison to PPPoE".
Essentially the original poster removed the OpenDNS #s from his DNS server field in the TCP/IP tab (b/c they seem to make Adobe.com inaccessible to him)
removing them & allowing his router to "pick them up from the ISP" seems to solved his problem.
However he can not, find what the numbers are that are being utilized,
b/c they are not entered as usual in the Network, & part of the DHCP lease,
or in Airport admin Utility.
I/ we wondered, if there was a Terminal command that will show what the
numbers are that are being used .
Does that help clarify what I mean? Sorry to be so long winded.
Eme '~[ )♥♪

Why jsp is converted into servlet?

hi,
Why the jsp is converted into servlet in the container? reason? why cant is evalute as a jsp file itself? why did not they develope a seperate container for jsp?

hi :-)
Why the jsp is converted into servlet in the container? reason? why cant is evalute as a jsp file itself?
JSP is an extension of servlet technology :-)
why did not they develope a seperate container for jsp?
Note: (an excerpt from a book)
"Inside the JSP container is a special servlet called the page compiler.
The servlet container is configured to forward to this page compiler all HTTP
requests with URLs that match the .jsp file extension.
This page compiler turns a servlet container into a JSP container.
When a .jsp page is first called, the page compiler parses and compiles
the .jsp page into a servlet class. If the compilation is successful,
the jsp servlet class is loaded into memory. On subsequent calls,
the servlet class for that .jsp page is already in memory; however, it could have been updated.
Therefore, the page compiler servlet will always
compare the timestamp of the jsp servlet with the jsp page. If the .jsp page
is more current, recompilation is necessary. With this process, once
deployed, JSP pages only go through the time-consuming compilation
process once"
For more info you can refer to the packages: javax.servlet.jsp and
javax.servlet.jsp.tagext
and also the two servlet packages: javax.servlet and javax.servlet.http
you might be asking why refer to servlet packages? because JSP needs it :-)
as i mention earlier, JSP is an extension of servlet technology.
hope other's will also give answer about your question.
regards,

Is there a way to integrate Adobe DNG Converter into Lightroom 5.7?

I recently purchased an Olympus OM-D E-M5 Mark II. Unfortunately, the new Olympus ORF raw file is not recognized in Lightroom 5.7. I am currently running a separate operation on all of my new raw files - running them through Adobe DNG Converter. This takes time as a separate operation, and I'd like to make the conversion automatic within lightroom. Is this possible?
Thanks!

Buy Downloader Pro.
Downloader Pro - Download, Organize, Rename Images Photos Canon, Fuji, Minolta, Olympus and Pentax Digital Cameras
I have been using this with LR for a long time now.You can incorporate the Adobe DNG converter into the download process. I initially bought Downloader Pro because it has an extremely flexible file renaming facility, but besides renaming files it can integrate GPS information into images from my handheld GPS receiver, hand off the files to the Adobe DNG converter and then place the resulting DNG files into LR's Auto Import folder, making the entire process automatic.

"Automatically Write Changes Into XMP" Not Working for DNG Files

Hello,
I am needing to update DNG/JPG file pairs with keywords that I add in lightroom. The following is the problem that I am encountering.
When the image consists of only a JPEG file (ie. I had my DSLR only snap a jpeg and not an associated DNG), and I add one or more keywords to the file in Lightroom, these are written / saved immediately in Lightroom and are visible immediately in the 'tags' column for that image in windows explorer. Very useful and important functionality for my workflow.
However, when the image consists of both a JPEG and a sister DNG (i.e.,snapped simultaneously by my DSLR), and I try to add keywords to these (treated at this point as a single image by lightroom) then Lightroom does not record the keywords into either of the two files and consequently no tags are visible in windows explorer. I have confirmed this apparent problem with a seperate image metadata utility software, and am hoping that it's just something simple that I am missing.
Also "Automatically Write Changes Into XMP" is selected and I have also tried manually both: "right click," "metadata," "write metadata to file;" and "right click" "update DNG preview and metadata" and the problem persists.
Hopefully someone has encountered something similar and can point me in the right direction.
Thanks in advance.

@Eric: hitting cntrl+s works but can be tedeous on large galleries. I've been doing this but it can be a pain.
@Jeannine: different topic than this thread but to answer anyways... Lightroom automatically saves all changes into your catalogue. You never need to dave your changes (here's the kicker though) as long as you do not move the original file. If you
move the file than lightroom won't know that it's the same image as the one you've edited. Once you are done editing your image you will need to "export" the image to a new file (you don't wan to overwrite the original). If you don't export than only lightroom will have your edits. Lightroom is "non-destructive" Which means that it doesn't touch your original photo. Lightroom keeps a text file containing the instructions on what you did to make the edited version. Since your changes are just text inatryxtions you have to "export" the image to get your final image in a version you can put online, print, etc. But to answer your original question, I think you prob moves the original image. If not, could you give us more info?

Close PR automatically once Converted into PO

Similar Messages

Maybe you are looking for