Close project with not zero WBSs

Hi Gurus,
how can I close project with not zero WBSs? Client has a project wit not zero wbs a very old cost on wbs. Stores = wbs don`t exists no more and they can`t move the cost from wbs.
Could zou help me?
Thanks very much.
BR,
Martin

Hi,
yes I want to give status CLOSE to project and all wbs even though I have balance in it.
I moved cost with Tr. KB15N to cost center and in CJI3 I have zero balance for wbs. But by closing wbs I have error KO115 Balance is not zero.
BR,
Martin

Similar Messages

  • Close Project with partially confirmed network

    Hello,
    Is there a config setting which sometimes allows users to close a project with a network only partially confirmed ?
    Seems this is happening occasionally instead of the system enforcing the network be finally confirmed.
    Thanks,
    Dave

    Hi,
    His requirement  "Is there a config setting which sometimes allows users to close a project with a network only partially confirmed ?"
    it seems he want to close project with partialy confirmations. anyway he can use one of those available options.
    Thanks.
    regards,
    Sam L.
    Edited by: sam Lesha on Mar 23, 2011 6:14 AM

  • Is it possible to Close project with open PO's

    Hi Gurus
    I have come accross a problem where the project has been closed even if it has open purchase orders assigned to network activities and also activities which have not been fully confirmed
    Can you please help and let me know whether this is normal and allowed by standard SAP
    Thanks
    Amit

    Hi,
    System will not allow you close if any open PO's exists.
    Refer the below link for the standard behaviour of the system.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
    Regards,
    Nag.

  • Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    You should ask in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • 'Close Project' in Captivate 4 not working

    Hi,
    I have a number of projects where I set the preferences to close the project, and it works in some and not others.
    I have a slide with a 'Done' button.  When the user clicks it, it goes to another slide with nothing on it but the background and a text caption from the previous screen, and it is set for only one second.  Some of these projects close perfectly; others delete the text caption and leave the project open.
    Any ideas?
    Thanks, as always.

    Hmmm, it was intended to show you that you simply cannot rely on the different means of closing the window. Close Project and the Exit button are essentially the same action, no? Perhaps I should amend the note so it specifically also mentions the action of Close Project.
    The thing is, unless you are presenting your Captivat using EXE format, you are seeing a very generic overall issue with closing a browser window. And closing browser windows is inherently fraught with issues and seldom works as one would expect. The only way to make it work as you want most of the time is to ensure you always open the window using JavaScript so it's a child window. When you open in this manner you have more control over the behavior of the child window and can usually close it at will.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Moved Premiere Elements 10 project Error: "Project is not compatible with current version of Premiere Elements"

    After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
    The same thing occurs when attempting to open the archive files.
    New projects, and unmoved projects behave properly.
    Moved projects receive this error.
    I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
    My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)

    txnoda
    Archiving Aspects of this.....
    First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
    a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
    inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
    b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
    When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
    What to do....
    If you can, put everything back the way it was. If not.....
    Let me emphasis some factors..
    You wrote
    After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
    Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
    From what you described, I am envisioning
    "Video" Folder
    which contains 2 folders named
    "Timestamped Folder" with .avi files
    and
    "DVD" Folder with the project file (project.prel)
    The project file has many files generated automatically in the course of it workflow. Where do you have them going?
    (See Premiere Elements  10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
    "Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
    If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
    But that is not the case.
    Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
    Please review and consider.
    ATR
    Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
    damaged projects.
    Troubleshoot a damaged project file | Adobe Premiere Elements

  • New Project will not save, re-open with accurate or matching audio and video.

    I filmed footage last week. Uploaded it into Premiere Elements and edited the footage in Elements, and saved my work as a project. I opened Elements this morning, and upon opening my saved project I was prompted by the program to locate the file. When I then selected the raw footage files, it loaded the project, but with audio and video out of order, not synced, etc.
    How do I save my work as a stand-alone project file with the audio and video synced as I intended, in a format that I can load, share, re-open and work on without having to re-locate the raw video?
    This seems to be a basic function of Video Editing software, so I hope it is something small I can adjust and move on from. Oh Also all the files, both project (.prel) and raw footage (.mov) are saved on the desktop of the computer i am using to run Premiere Elements.

    brjames1
    What version of Premiere Elements are you using and on what computer operating system is it running?
    After you have created a project and it has been saved, you should be expected to be able to reopen the project with the
    project as before the save/close (some discussion about rendered files remaining rendered, but essentially as written).
    When they do not, we can invoke the damaged project syndrome.
    The following is an Adobe document on that subject.
    Troubleshoot a damaged project file | Adobe Premiere Elements
    If you are getting "Where is the file....?" messages when re-opening a saved closed project, typical reasons
    a. you have moved, deleted, or renamed files and folders that were imported into the project after the save close...when
    you import media into a project, all you get are copies of the originals in the project. But the project needs to trace back
    to the originals in the hard drive location where those originals were when first imported into the project.
    b. if you store your source media on an external hard drive, the external hard drive may be malfunctioning and/or the
    drive letter of the external drive changing for a variety of reasons. Does any of that apply to you.
    Please review and consider, and then we can decide what next.
    Thanks.
    ATR

  • Marker Notes don't save once I close project in premiere pro

    When I create a marker in premiere pro with notes and then close the project, the notes are gone when I open up the project again, but the marker placement is still there.  Anyone else encounter this problem and know how to solve?
    Thanks!

    Premiere Elements is all in one software... the ONLY Adobe way with Premiere Pro is to use Encore
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help
    For help with using/learning Encore, go to https://forums.adobe.com/community/encore/content
    The bottom section of the tutorial link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

  • Captivate 5.5 - exporting to PDF & project does not close

    I have two questions please:
    1) I have set Preferences > Project > Start & End to 'Close project' < but the project doesn't close from the adobe reader
    2) I've seen in this forum people discussing 'exit button' - what is the exit button?

    1) Ok thanks Lilybiri. I wasn't aware that PDFs have limitations , thus why my question re  'close project' not working.  Is there a list of the functionalisites that are lost with PDFs?
    2) What is the 'exit' button please? I would have thought it meant putting an 'action' of 'exit' on the 'on success' property but  this doesn't seem to be the case.
    K.

  • Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

    Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
    Thanks!
    -Adrian

    the old apps are on my computer but they have had upgrades since they were put on the ipod originally.  you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Not able to create a web project with jsf or jsp or struts or spring

    Hi,
    I am trying to create a dynamic web project with jsf or jstl or struts or spring or any of web options available for a web project, but I am not able to do it.
    When I choose any of these options, the wizard asks me to "select an existing jstl/jsf/Spring 2.0 library, or click Add to add a new library." and since it doesn't show any existing libraries there, I clicked on add new library. When I click add, it opens a new dialog box where it has two options :
    1. to use spring/jstl/jsf lib from bea web site - when I choose this option, it tries to connect to the bea web site and gives me error that "connect time out". I don't know why it is not able to connect to the internet. I am not able to see the help also. There it gives error "The requested URL could not be retrieved".
    2. to use libraries from an existing spring installation - I provide the path of a directory where spring lib are, but then it gives me error that this is not a valid installation.
    On another machine, I am able to see the help contents, but still not able to get these libraries from the bea site.
    Please help.
    Thanks in advance,
    Sushma

    Hi Sushma,
    The issue you are facing has been addressed and will be part of the next release. For the current release, please follow the steps listed below.
    Send an email to [email protected] with details on specific facets you are trying to enable on your project.
    You will be provided with a url where you can download the required jars and details on how to manually add the jars to the workspace which will prevent the download on demand scenario.
    Cheers
    Raj

  • In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred.m file already open with write permission.

    In iMovie I am getting this message...Unable to prepare project for publishing.  The project could not be prepared for publishing because an error occurred. File already open with write permission. 
    How do I resolve this?

    Hi
    Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
    Yours Bengt W

  • Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

    Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Why am I getting this message suddenly, when I've done dozens and dozens of projects without trouble at all: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Why am I suddenly getting this message after I've been using iMovie for a few years now and have never had any such issue before:  The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Two things
    I meant search THIS FORUM
    Error minus49 not same as ERROR 49
    Yours Bengt W

Maybe you are looking for

  • Parameters for Auto reaction method

    Hi All, I have done BPM for monitoring a batch job and a service desk message is generating every time the job is cancelled, by using an auto reaction method. As the ticket is generating now, I want the job details also to come in the ticket. Like na

  • WM Replenishment and 2-step picking with storage units.

    Dear Colleagues, I am attempting to use SAP standard fixed bin replenishment and implement it as a 2-step picking process. Generally, the process goes as follows: - Generate replenishment pick tasks - Place the picked products onto storage units in a

  • Will you introduce me briefly to Arch and tell me if it's compatible?

    Hi! I am new to this place! Currently I am running Ubuntu, but unfortunately I am deeply disappointed with its bloated and opaque interface. In the Ubuntu forums I was recommended to give Arch a try. But before doing so, I have to be sure my hardware

  • Macpro with 1900xt arrived

    hi guys my macpro with 2gb ram and 1900xt has arrived. i have 1 x 250gb drive for OS and I bought 2 x 320gb drives and put them in a Raid0 array for apetures library. aperture is smoking fast. as i type this I'm importing some files (a lot actually)

  • "Junk" mail control

    Some emails are truly 'junk' and show as such in the header (yellow bar and different color text, labelled 'junk'), but I also have many emails that are filtering into my junk folder and coding themselves that way even though I don't want them to. Th