Close Service PO without service entry

Can anybody help me about service PO
Is there any possibility to make service PO without making service entry. that means how to make service PO 2 way match. for this service POs the business doesn't want to make service entry. they want to make a service PO and they want to close this PO through Invoice verification only without service entry intervene. once invoice was posted automatically PO should close. business requirement is they don’t want to post service entry for this type of Purchase orders.
how to do this process in SAP.
your time and help would be appreciated

Hi,
Please create service Material with material type DIEN, then please create PO without GR indicator and also please flag Invoice Indicator in PO.
Then you can do invoice with respect to this PO.
Thx
Raju

Similar Messages

  • Service PO without service master

    Dear All,
    I have seen one service PO where u can able to generate service PO without service No.
    You can enter ditect discription in short text at Item details.
    How it is possible?
    PLs tell me.
    Regards
    Gietsh

    Hi,
    if you get the error message
    Please maintain all mandatory fields
    Message no. SE460
    and the cursor jump sinto the field  service number, then you have set this field in the customizing for a required entry.
    You can check this in:
    Transaction SPRO - SAP reference IMG - Materials Management - External Services Management - Define Screen Layout - double click into the following field selection keys (one by one) and check the "Service fields" -> "Service Number", because it was set to a required entry:
    field selection keys (double click on them):
    4     Purchase order
    ME21     Create purchase order
    ME21N     Create purchase order
    NB     Standard purchase order (or your document type)
    PT9     Service item
    Regards,
    Edit

  • Reporting Service issues without service and land line access?

    Since Verizon makes it extremely difficult to report poor coverage, I figured I would just place this information online in hopes of an agent reading and reporting the problem.
    There is little to no Verizon coverage of all types (4g3g/1x) over pretty much the entire campus of the Illinois College in Jacksonville Illinois which is about 2 miles off I72 and about 20 miles west of Springfield Illinois.  Actually the entire community has poor service from Verizon yet US Cellular and AT&T seem to rock the area with full 4G. From talking to students and faculty this is a long known problem and in many spots there is absolutely zero voice coverage, forget about data from Verizon.  We have *228’d the phone many times out by I72 and my dad and mom’s Android 3g/4g smart phones phones do not work at all either.
    It seems that this is known by Verizon, as I have seen coverage problem reports on the web dating back to 2008 regarding this area in the Verizon forums.  Certainly Verizon can do something to remedy this, especially being so close to a major Interstate and when other carriers have great service in the same area, come on AT& T is horrible across 70% of Illinois yet they work in Jacksonville, now that is embarrassing.  It would be nice to actually be able to let my daughter use her phone even forgetting about data but come “cover 97% of the people” I know that is not true.  Let's go Verizon, my friends on AT&T and US Cellular and Sprint all get better service (they can make calls, at least)... on Verizon we can't do anything even with roaming enabled!
    This forum says call customer service 1-800-922-0204 from landline or *611 but that doesn't work for my daughter and I'm in mexico this week.  There has got to be an online way to report issues?

    Would love too, but family has Verizon in several states including other college towns Tempe AZ, Macomb Illinois, Jacksonville Illinois and home in Rockford IL we have used Verizon for years.
    If daughter changes companies just for Jacksonville Ill, do we all change?
    Remember AT&T has horrible coverage in most of illinois yet they rock in a dinky little college town in south central Illinois, go figure.  Verizon says they cover 97% of the nation and their maps are quite clear about the areas they cover including extended coverage.  Verizon is misleading people as although extended does mean covered by someone else it does be coverage is supposed to exist.  Verizon can not have it both ways and frankly, family cannot have a bunch of different plans and I really want to avoid switching everyone.  When I get back in the US I'll call the 800 number and see what can be done for daughter but Verizon should have chat support not just chat sales so stuff can be done online.e would think Verizon would want to know where people have coverage issues..
    On

  • Service entry and Acceptance without service PO

    Hi,
    Is it possible to create Service entry sheet and service Acceptance without service PO ?
    if yes Please suggest the Steps.
    Regards,
    Rani

    Hi,
    It is not possible to create service entry sheet and service acceptance without service PO.
    After creating Service PO only create service entry sheet and acceptance display in SAP.
    Hope, it is clear for you.
    Regards,
    K.Rajendran.

  • Service PO with service text - Account determination

    Hi experts,
    When we create Service PO without Service Master, Material Master (Only with service text), how the account determination will happen. 
    Is there any other way to get the account determination?
    Regards
    Mohan

    Account determination can also happen through material group if not through account assignment.

  • POs without service entry-Report

    Hai,
    I have one requirements for service entry report.
    my requirement is I need to take all POs without service entry.
    I am taking records all from the table EKBE, but I  dont know how to classify  these records.
    Is it based on fields(table EKBE) vgabe & vgabe?
    Is the table EKBE correct?
    Any tips?
    With Regards,
    Jaheer.

    > 1) I have a contract Number, how to find the Service Entry sheet and P.O. number?
    Go to ME2M select scope of list as RAHM, choose contract in the same screen put the required details execute
    select the line item from contract go to release details there you can find the history
    Also You can Check it in ME33K, Select the line item and go to item details. In quantity and price tab, you can see Target quantity and Released order quantity.
    Selection Parameters Tab---->Press F4 from the drop down you can find list of parameters (WE102 & GUTSCHRIFT)
    For PO-GR existing, use ME2N & WE102 combination for existing GR list, pls use ctrl+F8 for the selection field for this.
    For PO-Invoice, use ME2N & GUTSCHRIFT combination for existing Invoice list ,
    > 2) My user wants a to know how much payment company has made agaisnt the each line item of the service entry sheet. Please suggest me the T. code
    This is FI reporting & not MM, but you can check this through T-code FBL1N.

  • Invoice without service entry sheet

    Hi
                    How to create Invoice without service entry sheet? any settings are there?
    Thank you
    Sameer

    The vendor master and inforecord uncheck the GR based invoice verfication or Service based invoice verfication and do the MIRO with reference to PO.

  • Service PO and Service Entry Sheets Question

    Hi Guru,
    I need some advice on the following questions in service PO and service entry sheets.
    1) How can i change the default unit of measure in service PO? where is this in customizing?
    2) How can i turn off the message "No message record could
    be found for output of message.Save anyway?" when i try to accept a service entry sheet entry?
    3)Can someone share with me the business process for service PO?
    Is it a must to do MIRO against the service entry sheet? How does the the person who is performing the MIRO transaction knows the service entry sheet number?
    Thanks.
    Zhulk

    HI,
    Following are answers to some of your questions -
    1) What do you mean by default unit measure? If this is the unit of Service, then you may change this in Service Master (T Code AC03). If the unit is at line item, then it should be AU, because you may order multiple services under one line each having different units of measure.
    2) The message "No message record could be found for output of message. Save anyway?" is displayed because, you have not maintained output message for service entry sheet. Either define the output or remove the warning message at Attributes of system messages.
    3) The process of service PO is same as material PO. The difference is that the item category for service PO is 'D' & then you maitain services for the line item either with or without service master. After completion of service, you create service entry sheet at transaction code ML81N & after accepting the service entry sheet, service entry sheet based GRN is prepared. The person who is posting MIRO is not required to know Service Entry Sheet number to post MIRO. The system automatically checks the service entry sheets accepted. Anyway, the service entry sheet number can be displayed at Purchase Order History tab of the conccerned PO at PO display option (T Code ME23N).
    Hope your query is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • ECS scenario - Service PO and Service Entry sheets in backend

    Hello,
    We are on SRM_SERVER 550, SP07 and  in the process of moving to ECS scenario.
    There are some questions from me on the Service procurement in ECS.
    1. When we create a PO with service item in SRM, will it get copied to backend as a Po with item category 'D'? This is how it happens in classic scenario,but does the same hold good in ECS?
    2. When creating the confirmation for the service PO in SRM for ECS scenario, this would be a time entry/service entry sheet.
    Would this be replicated to R/3 as a time entry sheet using RFC call?
    Standard SRM210 guide mentions that goods confirmation will flow to backend as GR thro ALE/IDOCs and service confirmation will flow to backend as service entry sheets using RFC calls.
    But I wanted a confirmation if this is entirely a standard SAP scenario or are there any restrictions on this?
    Regards,
    Srivatsan

    HI,
    Following are answers to some of your questions -
    1) What do you mean by default unit measure? If this is the unit of Service, then you may change this in Service Master (T Code AC03). If the unit is at line item, then it should be AU, because you may order multiple services under one line each having different units of measure.
    2) The message "No message record could be found for output of message. Save anyway?" is displayed because, you have not maintained output message for service entry sheet. Either define the output or remove the warning message at Attributes of system messages.
    3) The process of service PO is same as material PO. The difference is that the item category for service PO is 'D' & then you maitain services for the line item either with or without service master. After completion of service, you create service entry sheet at transaction code ML81N & after accepting the service entry sheet, service entry sheet based GRN is prepared. The person who is posting MIRO is not required to know Service Entry Sheet number to post MIRO. The system automatically checks the service entry sheets accepted. Anyway, the service entry sheet number can be displayed at Purchase Order History tab of the conccerned PO at PO display option (T Code ME23N).
    Hope your query is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Iphone 4 without service after IOS 5.1

    I am without service after IOS 5.1.  Since the upgrade, my phone can't make or receive any call. I bought it from my mobile operator (Claro Brasil) itself. The odd thing is that when I use the SIM of my brother (from another provider - TIM) the phone works perfectly. Please, can someone give me any advice. I called to Claro and they said everything is fine with my network and that they will open a procedure to see what can be done. I think they don't know what is happening and I can't wait much longer.
    Thank you in advance.
    Luis
    Brazil

    Yes, I tried to restore it as new. Actually, 2 times, with and without backup. Today I will try to get a new SIM. Hopefully, that will solve my problem, but I am a bit skeptical as my SIM was working ok before the update.
    Thank you very much for your help.

  • Unable to create PR with Service Line & also no entry in ESLH table using

    Hi Experts,
    I am using BAPI => BAPI_REQUISITION_CREATE to create PR and it is successful to create PR but when I try to create PO is become fail (proably missing entry in ESLH table).
    Now my requirement is to create PR with Service Line and an entry in ESLH table (should be filled by SAP automatically). I have been passing the service related/account assigment tables into BAPI but still not working.
    Will you please give a solution to create PR with Service Line and also need an entry in ESLH table (its important to my req)?
    Also provide some input on Service Line, if possible(How to check Service Line for PR + Account Assignment to Service Line + etc.)?
    Note that: If I create PR manually then there have entry in ESLH and hence I can create PO.
    Definately the quick solution help me lot...
    Thanks
    AKG

    Hi Experts,
    I am using BAPI => BAPI_REQUISITION_CREATE to create PR and it is successful to create PR but when I try to create PO is become fail (proably missing entry in ESLH table).
    Now my requirement is to create PR with Service Line and an entry in ESLH table (should be filled by SAP automatically). I have been passing the service related/account assigment tables into BAPI but still not working.
    Will you please give a solution to create PR with Service Line and also need an entry in ESLH table (its important to my req)?
    Also provide some input on Service Line, if possible(How to check Service Line for PR + Account Assignment to Service Line + etc.)?
    Note that: If I create PR manually then there have entry in ESLH and hence I can create PO.
    Definately the quick solution help me lot...
    Thanks
    AKG

  • SLA for service request\service order  without create a service contract

    Hello Experts,
    We are using CRM 7
    Is there a possibility to determine SLA for service request\service order  without create a service contract?
    We have defined:
    1. Trasaction Code: CRMD_SERV_SLA-  Response Profile / Response Times
    2. In Customizing we have defined our date profile with the relevant duration
    3. In  Customizing for transaction types  we defined  SLA Prof. Det. Proc= IT000001
    4. we assign the Service Profile and Response Profile to BP (from "service levels" block) .
    Everthing seems ok but the SLA time is not determined automatically.
    Hope you can help me out.
    Thanks,
    Tal

    Hi Tal Tal
    Your steps are correct and i hope you did these too
    a) In the SLA determination procedure ,you have defined the access sequence for service product item or org
    b) If service product item ,take any service product for ex INVESTIGATION assign the two Service and response profile in the service tab
    c) if org the above two profiles can be assigned to org attributes.
    d) In my opinion the date profile you should have assigned it to item category as I think the SLA date calculation is done at the item level
    e) You should assign the SLA det prof to the transaction type in the service process business category - customizing header.
    f) when you create a transaction type sla dates will be determined as follows
        a) you have to enter service product entered in the item ,then dates will be visible,and also if your access sequence is based on service product,the respons profile and service profile will be determined.
        b) if you have given indicators as all these three "category,priority,codes' in your response profile, then you have to enter all three and then hit enter
       c) After hitting enter,the response profile determined above,will use the above 3 inputs of category,priority etc and determine the duration times ,which should be maintained in your date profile.hence the durations determined will be used in the dates calculation.
    Let me know if you have any other questions.

  • Idoc Error-Price without service not allowed

    Hi Experts,
    I have a Service PO with Acc.***. P .One service item entered in PO with price.When I go via ME22n & change the Price of Service item under services tab,its fine.
    When this is done via Idoc generation(Msg.Type PORDCH) using standard FM BAPI_IDOC_INPUT1, it creates another service line item for the new price.
    The first line item cannot be deleted via IDOC posting.Gives error "Price without service not allowed"
    This is quite Urgent.Immediate reply is highly appreciable.
    Regards,
    Jagan

    Hi,
    Check in WE42, for the process code, you have assigned this function module and given the correct process code in the partner profile.
    Sujay

  • Inbound Service Interface without Input Request Message

    Is it possible to create an Inbound Service Interface without Input Request Message?  We are trying to create a web service to get all records from a database table hence no input parameter is needed.  We have tried in both XI 7.0 and PI 7.1 but couldn't do it.  Is this scenario not supported by ESR or am I missing something?  Any hint will be appreciated.
    Regards,
    Jiannan

    In the scenario I described in my initial post the table structure is only needed in the response message to receive the data. 
    For a web service generated from a RFC function module using the service creation wizard (SE80) a table parameter is automatically included in the request message.  I can understand this as the wizard can not figure out if the table parameter is needed in the request message or not.
    I have tried to use the service creation wizard to generate a web service from the function module RFCPING that has no input or output parameters.  As shown in below WSDL segment the WSDL does allow not having any input or output parameters.
    - <wsdl:types>
    - <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style">
    - <xsd:element name="Rfcping">
    - <xsd:complexType>
      <xsd:sequence />
      </xsd:complexType>
      </xsd:element>
    - <xsd:element name="RfcpingResponse">
    - <xsd:complexType>
      <xsd:sequence />
      </xsd:complexType>
      </xsd:element>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="Rfcping">
      <wsdl:part name="parameters" element="tns:Rfcping" />
      </wsdl:message>
    - <wsdl:message name="RfcpingResponse">
      <wsdl:part name="parameter" element="tns:RfcpingResponse" />
      </wsdl:message>
    Thanks,
    Jiannan

  • Using Oracle Service Registry without SOA Suite

    I am trying to use the Oracle Service Registry without having SOA Suite as all I want is to simply publish a web service for an experiment.
    I have :
    JDeveloper 10.1.3.3
    Oracle Database 10g
    Getting problem in Installing Service Registry. Do I need to run a script to make UDDI schema, or table space, or database in advance?
    Installation is not getting the directory for OAS Home. Now where is the OAS HOMe?
    .../JDeveloper/jdev/ ?
    .../Oracle10g/
    .../jdeveloper\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j ?
    Its not accepting any of them. Where does OAS resides?

    If all you have is Jdeveloper and database you do not have an OAS Oracle home, you will need to install OAS separately. It is also possible that you can just install standalone oc4j rather than a full blown OAS to install SR into, check the install guide
    If I remember correctly the database schema is created as part of the SR install.

Maybe you are looking for

  • Printing text at particular position in SAPscript

    Hi All, I want to print text at particular position, I used Command POSITION but it is not working . As I am using counter as Y position for a box and i want to print lines of text in that box. since I am able to position box according to counter but

  • Pavilion dv4 Cd drive not working

    Hi guys about two months ago my cd drive decided to stop read my my cds as well as to stop burning disc. Ive tried updating it and cleaning the eye and i know that its not the cds because they  work on my desktop. the funny thing is that the drive do

  • Photos has many instances of displaying blank photos, thumbnails?

    My recently setup photos library has a lot of blank images. They show a blank thumbnail and when I open it sometime a picture will load which is something I have already deleted. I am not under "show recently deleted" rather this is happening under t

  • Iphone will not boot past apple logo, reset doesnt work

    Hello... i replaced the the LCD screen on my iphone 3g and all i get when i power it on is the apple logo and a swirling progress bar that doesnt move, this loops every 5 or so minutes but does not progress to the password screen..... Please anyone..

  • How to create afile of Unicode file format

    Hi I need to create a file. The content that I write has to be written on to a file in a unicode format ,Now my problem is how do I create a file of Unicode format. Is there any api do this ? -satish