Close session after a period of time with a popup mesage

hey ,
my requirement is to display a popup mesage if the user didnt touch the system after some time
- if the user didnt respond to the popup after 30 seconds the session will be closed .
is there any FM ?
regards
ASA .

follow this settings..
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.

Similar Messages

I am running a vi that crashes after a period of time with no error message

I have designed a vi that runs in a for loop. It takes data from the BNC-2110 (using the AI One Scan vi), and then calls a vi to adjust the measurements to a temperature. After this it displays an output on a plot (per input channel). After this program runs for a while (not always the same amount of time), LabView will close and a Windows (2000), application error box will pop-up. The box will simply state that an error has occured and an error log is being recorded.
Here is a copy of the vi that I am using. It may take up to twenty minutes for the error to occur. I think that everything is in order (on the programming end). It is a short program and if anybody can find
the problem, I would be very happy.
Any help is appreciated, thanks.
Tyrone
Attachments:
Instrument.vi ‏70 KB
Thermistor_Reading.vi ‏38 KB
Memory.txt ‏127 KB

this is the same error that happened to me last summer under NT. Switching to win200 helped me but you are already on win2000. The best I can suggest is to install labview 6.02 in a clean win2000 system and update to the newest NIDAQ release 6.91
succes
greetings from the Netherlands

Lag after a period of time

Hi,
I've recently purchased Photoshop CS5.1 and I've noticed an issue. After working for a period of time (5-10 minutes), when I try to move an item/layer, or when I want to use the move tool, I have a 1-2 second lag between the time I initiate the action and the actual screen result.
One thing I've discovered is that the Timing info grows in time reaching 140s sometimes. The higher this is the more the lag.
I have no problems with hdd space for scratch disks and I have no installed plugins. One way to fix this issue is to restart PS, but it doesn't seem to be a viable solution. The problem also remains when I have OpenGL checked. I used to work with CS3 and this issue never occured.
Anyone else had this issue ? Thanks in advance.
My system:
OS: XP SP3
CPU: Intel i5-2400
GPU: Gigabyte 550Ti Gtx 1Gb
RAM: 4Gb

I have new information regarding my issue. It happens each time I start to work. This delay appears only when I click on the canvas to perform an action. It's most visible when I try to use the Hand tool to pan the canvas, I click to move but there's a slight delay before the actual screen result. This delay increases in time, even though I don't work and just leave Photoshop alone. After a period of time this delay disappears and everything is back to normal.
Also, if a try to pan the canvas using the scroll wheel everything is fine. Also, no problems when I try to zoom in or out. I've tried different scratch disk locations, different performance settings with no success. I've tried to close third party applications, in case something would have interfered with PS, and nothing. Is there a way to monitor the mouse input to see what happens when I click the canvas to execute an action ?
Anyone ?

A connection attempt failed because the connected party did not properly respond after a period of time

Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
South Central and East regions:
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
On Azure, the same web service call can result in this error or will return a response successfully.
There doesn't appear to be any pattern as to why the same call would work one time but not another.
How can this be resolved again? Any feedback is appreciated. Thanks.

Hi,
Please have a look at this article:
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
it gives us several ways to solve this issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mail stops receiving messages after a period of time

Every since installing Mavericks my Mail app stops receiving messages after a period of time. I know because I get the email on my phone, but I try to grab them in Mail and nothing. If I restart Mail then they come through.
I'm using Gmail as my email provider. Is anyone else suffering with this? Is there a work around?

Workaround or not, this is an annoyance, and that's a nice way of putting it. Coming from Mountain Lion, when Mail was working flawlessly, having to deal with this issue is just plain ridiculous. What happened to the Mail application? I don't understand how Apple could screw this up to badly.
Every time I restart or reset the connection to the servers, the Mail app is downloading thousands of messages (I can see the display on the bottom-left). I have no idea what it's doing or why, for that matter. If Apple doesn't fix this soon, I will seriously be forced to look for an alternative, which saddens me greatly. I really like Mail, but if it cannot reliably get my mail simply because I've left it open too long, or hidden it behind another window, I will stop using it.
What's worse is that I've had similar issues with other applications like iPhoto and iTunes. Whatever is happening to Mail is probably not just application-specific. It's probably OS-specific. I hope Apple is working on it and that we will see a major update to Mavericks soon. All I know is that, right now, I'm seriously regretting upgrading to Mavericks.

Photoshop CS6 stops working after a period of time

Hi,
I'm having a very frustrating issue with Photoshop CS6. When starting up my Pc or notebook it works just fine and I can open images and create new documents.
After a period of time (unknown) I can no longer open images or create new documents. There are no error messages appearing at all.
I have contacted support and to date nothing has worked to resolve this.
I have un-installed and re-installed Photoshop. I have tried running it without loading preferences etc.
The application is up to date as is my operating system.
This is affecting Photoshop on 2 separate installs, my PC and notebook
Any ideas?
Running Windows 7
Cheers
George

But this is happening on two different machines, a work notebook and my home PC... surely not the issue?
Cheers

Why does my iPad mini stop responding to wifi after a period of time?

Why does my iPad mini stop responding to wifi after a period of time?
For example, I can connect to wifi and use Safari and my iPad's interet capabilities with no problem. But if I then leave my iPad alone for an hour - when I go back to using it, it still shows as being connected to the wifi, but is unresponsive - i.e. web pages will not load etc. - I have to disconnect and reconnect to the wifi to make it responsive.
In advance, thanks

Try #5
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Firefox stops working properly after a period of time

btw, I can't type in this box. I'm typing this in another program and pasting it in.
Using Firefox 5. I just installed Lion yesterday for Mac, but this problem occurred even before I did so. After a period of time, FF stops working properly. I notice it when I try to open a new tab. It won't switch to the new tab and the screen turns blue. If I type in a web address, it looks like it tries to go there, but it doesn't. When I look at any other already open tab, it has the blue screen. I have to restart to get my proper web pages back.

Whenever I click on "More System Details" there are several things I hope I won't see. Your Conduit Engine is one of them. It is malware by any reasonable definition and a cause of major problems with Firefox.
Google for information and advice as to how to get rid of it. Someone may come along with more specific advice..
If things aren't perfect after that you could do some straightforward troubleshooting(Safe Mode, Problematic Extensions, Hardware Acceleration etc) - in default theme -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

Tour shuts down after a period of time have to plug into charger for reboot

Today I noticed that my phone will shut off after a little while of inactivity. The battery will be mostly full, and it thinks it dies. So inorder to reboot you must plug it into the charger. Once you plug it into the charger you get the image of the battery with a bolt in the middle of the screen. After a few minutes of charging it resets to the home screen, and after another period of time it will do it again. You might think this is occurring because the battery is dead but the battery will be 50% maybe a little more or a little less. I am wondering if this is an OS problem or something that is just wrong with my phone...

That definitely sounds like a phone issue. We had a user with a similar problem that ended up getting her phone replaced. She hasn't had any issues since.

Dnsmasq stops after random periods of time

I have had dnsmasq running my localhost adblock since over a year and everything was working fine. However, since several weeks, I noticed that it just stops working after random periods of time.
I was unable to identify any error, and it starts just fine if I run it after it quits, but after several hours it quits again. Here's systemctl status dnsmasq output:
Showing one /org/freedesktop/systemd1/unit/dnsmasq_2eservice
Sent message type=method_call sender=n/a destination=org.freedesktop.DBus object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=Hello cookie=1 reply_cookie=0 error=n/a
Got message type=method_return sender=org.freedesktop.DBus destination=:1.255 object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
Sent message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/dnsmasq_2eservice interface=org.freedesktop.DBus.Properties member=GetAll cookie=2 reply_cookie=0 error=n/a
● dnsmasq.service - A lightweight DHCP and caching DNS server
Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled)
Active: inactive (dead) since Tue 2014-10-28 22:22:02 CET; 10h ago
Docs: man:dnsmasq(8)
Main PID: 2590 (code=exited, status=0/SUCCESS)
Root directory /var/log/journal added.
Considering /var/log/journal/8ed49f4f63fc90478b051d8f00000121.
Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 added.
Journal filter: (((OBJECT_SYSTEMD_UNIT=dnsmasq.service AND _UID=0) OR (UNIT=dnsmasq.service AND _PID=1) OR (COREDUMP_UNIT=dnsmasq.service AND _UID=0 AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=dnsmasq.service) AND _BOOT_ID=c9b052e6ea8d4c27bb30a0aaf25d5874)
Root directory /var/log/journal removed.
Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 removed.
mmap cache statistics: 0 hit, 0 miss

Just as an update to the above, the same problem occurs in safe mode?

Is it possible to have the cellular data switch turn off after a period of time. I would like to minimize the data usage, but often forget to turn off the cellular switch once I have returned to wifi coverage.

My new iPhone 6+ seems to eat up data at a faster rate than my iPhone 4. I was advised that turning off cellular data when I am at home or work where I have wifi will keep my cellular data usage to a minimum. But I have found that I frequently forget to turn it off the cellular once I have finished a task where I needed it. Is there a way to have it turn itself off automatically after a period of time? Thanks

No, you will have to manually do it.
Have you look into putting your phone in airplane mode and then connect to wifi.
iOS: Understanding airplane mode - Apple Support

W,indows 7 shuts down at welcome page after a period of time, when user is not logged in.

I have two users on my computer, when they are both logged out and the computer is at the welcome page, I need the computer to stay on , as I need to remote accsess it.But the computer turns off after a period of time, even though in settings, I have all
the power setting to never off.
How do I stop the computer turning it self off, when there is no one logged in, and on the welcome page?
Thanx.

Check in BIOS sometimes for hours shut down.
Is the computer starts then straight without a problem? If you do not check the temperature of the processor.
Start your computer in safe mode and remove programs that start automatically by MSCONFIG
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Rmiregistry shutdown after a period of time!

I binded a remote service to the rmiregistry,and start the rmiregistry using a seprate .sh file (not start in the program). I found the rmiregistry will shutdown and exit after a period of time when there're no calls made to the remote service binded.
It seems that if no calls were made to the remote service, after some time interval, the GDC will collect the remote service, and when there're not a single binded remote service that were not GDCed. the rmiregistry will exit.
Is my opinion right or not? and what can i do to solve the problem?

He means me, but I don't have a better answer, except maybe this. Does your .sh script by any chance say
rmiregistry &If so change it to this:
exec rmiregistry &The latter is better, because it won't exit when the shell that started it exits, but this is a Unix issue not a Java issue.

After short period of time my messages are disappearing from my Icloud mail account.Why does it happen?Can I restore them back?

I can't understand my Icloud mail behavior.All messages I sent are stored in sent box as usual whereas messages I receive are disappearing after short period of time (no more then 2 weeks).Why does it happen?Do I have any chance to restore them?

Unfotunately I'm not eligable for MAC support over the phone and have to take it in to the Genius Bar. Hmmmpf.
But I was able to isolate the errors (using Console) that occurred just prior to the network failing:
8/30/09 10:53:05 AM Dock[231] _DESCRegisterDockExtraClient failed 268435459
8/30/09 10:53:25 AM SystemUIServer[232] * CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x9307, name = 'com.apple.tsm.uiserver'
See /usr/include/servers/bootstrap_defs.h for the error codes.
8/30/09 10:53:25 AM com.apple.launchd[196] ([0x0-0xc00c].com.apple.systemuiserver[232]) Check-in of Mach service failed. PID 232 is not privileged: com.apple.tsm.uiserver
8/30/09 10:53:33 AM GrowlHelperApp[249] WARNING: could not register Growl server.
8/30/09 10:53:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[259]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
8/30/09 10:54:36 AM [0x0-0x1a01a].com.apple.Safari[261] Debugger() was called!
8/30/09 11:00:50 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[279]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
8/30/09 11:05:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[290]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
Any idea what these mean?

Viewing Data Usage For A Period Of Time With The WRT1900AC

Is there a way to view the overall data usage for a period of time with the WRT1900AC? For example, I would like to see how much data I've used (up and/or down) for this month.

Hi. The Linksys firmware does not have that feature.

Close session after a period of time with a popup mesage

Similar Messages

Maybe you are looking for