Close sessions on ITS IAC iview

Hello Gurus!
i have a technical problem.
I'm working with portal 7.3 and SAP ECC6
I made some IAC iview in my portal but i notify that session is not closed when i navigate or when i close portal.
So if i have 3 IAC iview and i navigate through all, on the end i have 3 pluginhttp sessions open.
i tryed to add ~DISCONNECTONCLOSE parameter but no result.
I notify the problem start from ITS, because when i test transation from SIFC, and i close browser, the session remains open.
Any suggestion?
Thanks in advance
Alessandro

hello Fabio!
thanks for suggestion but i not solved problem:
in note 1660720 the suggest me only how to use DMS logger and where investigate or move focus. In my case i can see the session open in Session Release Agent. So i need check ths problem in R3 .
note 1599643 explain how to configure GroupCleanup.groupExpiration paramenter, but is not my case.
note 596698 is more and less similar to 1660720
in note 1331353 suggest to deactivate popup blocker. I tried but without result
I checked also the kernel release in R3 and is the last version
I think the problem is in R3 side. Maybe a parameter or a configuration? a custom code to add somewhere?

Similar Messages

Problem when testing ITS (IAC) iView

Hi all,
I have created a service for a T-Code:SMEN.When I test this service I am able to see the 'SMEN' screen, but in the command box if I type any t-code, say "SE38".
The entire screen refreshes but it is not taking me to "SE38"..
I have complete authorizations for all t-codes.
In this service I have the below parameters:
Parameter Name value
~TRANSACTION smen
~GENERATEDYNPRO 1
I have created a IAC iView with this service and even in the preview of this iView, same thing happens.
Can any one give some direction in solving this ..
Thanks in advance
sethu

Michael is right - you should not be using an IAC iView, but a SAP Transaction iView with the SAP GUI type set to "Web GUI".
- Darren
<a href="http://www.fortybeans.com/">blog</a>

ITS applications do not close sessions

Hi all,
we have ITS based version of ESS, as well as one BSP application, all integrated in EP 6.2. The problem is that applications do not close sessions, as it is pretty visible e.g. in transaction SM04. I checked the setting of ~disconnectOnClose=1. Small popup windows closing the session are not visible.
We use SSO based on SAP logon tickets.
EP 6.0 SP2 P5 HF8
ITS 6.2 PL 14
SAP HR 4.7 PL38
SAP Basis 6.2 PL 48
Any idea?
Thanks,
Pavol

Hi,
After i upgraded my ITS from 610 to 620 Patch level 4 The disconnection was working fine with poping the disconnection.
But after applying patch level 17 itw as not working even though the parameters.
~timeout
~disconnectOnClose
~userTimeout
I tried all the option and even created massage in OSS but no luck.
SO i have to revert back to 620 Patch 4 and now working fine.
Regards
Prem

Portal Theme for IACs iViews (ITS Theme Generator)?

Hi guys,
it's me again I got another question / issue (i didn't post it at the other thread, cause this is another issue):
We deployed the SRM BP 5.0 to the Portal EP 7.0 SP14 and now i want to change the look and feel of the SRM iViews.
I allready customized the Portal Theme via the "Theme Editor".
But the IACs iViews are staying SAP standard.
I got the hint to use the ITS Theme Generator, so I did. But now i come to the point where i am trapped:
I specified at the ITS Theme Generator the following entries:
The ITS URL : <ITS Server>:<port>/sap/bc/gui/sap/its/
UserID : ####
PW: ****
Service: bbpsc02
Theme: MyTheme
Then the new page opens and the transaction is displayed. At the upper side the transaction is previewed. at the lower side the images of the transaction is displayed.
AND Now here comes the big Questionmark:
How do i change e.g. the background color of this transaction or the text font? i can't find any section which would offer me this functionality!
The only thing i can "customize" are the images...what about the rest? What if i want to have my buttons grey instead of Yellow?
Or am i completely wrong? does this customization has to be done in the R/3 itself?
Any help or hint is warmly welcome and of course will be rewarded by points.
Thanks a lot ....
best wishes
Stefan

Hi Guys,
actually we made an OSS message.
The result was that there is no standard portal way to customize the IAC themes for the BP SRM witht the tool "ITS Theme Generator".
To my knowledge the only way how to adapt the theme of these iViews is to customize them directly at the SRM back end via the transaction SE80.
Well that's the end of the story...
Greetz to all of you
and see you soon in an other question /post
Kind regards
Stefan

ESS Bus. Pkg EP 6.0 SP19 to R/3 4.7 ext.2 - IAC iView Problem

Given the above components, I've deployed the ESS business package to the Portal. All components deployed successfully... no errors. I'm creating a new Role (custom, not from BP) and I'd like to use one of the iViews from the Business package in this role. I'm using the "Enrollments" iView which seems to be an IAC iView calling PZ14.
Now the problem... when I access this iView via the Portal, ITS is called and the iView loads but only shows me the Easy Access Menu (SMEN). PZ14 never loads. I can enter PZ14 in the transaction field and it will load but it doesn't come up on its own. I also created a SAP GUI for HTML transaction iView to test PZ14 and that one works fine. To meet the customer's requirements though it must look "pretty" ... like the IAC iView does.
The only thing I changed on the iView was the system alias. Changed it from SAP_R3_HumanResources to SAP_R3 (this is the proper name of the system I'm using to test).
Any ideas?
-Kevin

This has been resolved. Oddly enough, I inadvertantly added /webgui/! to the end of the ITS Path definition in the system object. This was causing the afore mentioned behavior. Once removed, the iView behaved as expected.
-Kevin

Error in creating IAC iviews

Dear All,
We are trying to create IAC iviews but getting error.
Environment details:
OS: AIX 5.3
DB Oracle 10.2.0.2(UC)
Application EP7.0 (SPS14)
Backend ECC 6.0 SR3
We followed the below mentioned steps:
01) Created one Internet Service ziactest in se80 with the parameters -
~transaction = tcode and ~generatedynpro = 1
02) Published the 'complete service' to the site INTERNAL.
03) Created one sub element under /sap/bc/gui/sap/its as ziactest
04) Modified the service ziactest as :
- specified "GUI Link" = Yes
- specified following GUI Configuration parameters:
~WEBGUI = 1
~SINGLETRANSACTION = 1
~NOHEADEROKCODE = 1
~TRANSACTION = tcode
~GENERATEDYNPRO = 1
- specifed handler as CL_HTTP_EXT_ITS
05) save & activated the service
When trying to test the service, we are getting a script error "Error on Page": wgu_global_eventhandler is null or not an object and the page displayed - is getting distorted . Also, system is specifying that: "The URL
http://gcbeccd:/sap/public/bc/its/mimes/system/page/menubase.html was not called due to an error."
When tried directly with the above url, the following error is getting displayed:
"The following error text was processed in the system RD3: The theme extracted from PAGE/MENUBASE.HTML has more than 2 characters."
Please note that: The SAP GUI for HTML has been configured and working properly. Also, the SAP note 790727 has been applied to resolve this problem but no result.
Any help in this regard will be highly appriciated.
Thanks & Regards
Sudip

Hello Sudip,
If the webgui service is working then there should be no reason for this to not work. By specifying ~webgui 1 you're actually not using any template you've created for the ziactest service. The URL should be:
http://gcbeccd:/sap/bc/gui/sap/its/ziactest
Please also try:
http://gcbeccd:/sap/bc/gui/sap/its/webgui?~transaction=tcode
Please also publish the IAC, WEBGUI and SYSTEM Internet Services from SE80 to the Internal ITS.
You should look at the developer trace (dev_w#) for the Dialog Workprocess that is used and reporting the error for more information.
Edgar

IAC iViews - Save old status

Hello experts,
I have a problem with the ITS Service in portal side. if I hace two pages, page1 and page2, and this pages are IAC iViews for the same ITS service, and I perform this steps:
1) open page1
2) press a button in page1, that will show more information
3) open page2
4) open page1
When I open the page1, in point 4, the status was not the same that I got when opened the iView for the first time, but with the content that I got after I press button.
How can I fix this? I want that, when I open the page1 in 4th step, I get the same content that in step1.
Can someone help me?
Thank you
BR
Joao

Hi,
Which transaction are you using on your ITS service? You can define two services, one for edit and another one for view. On first step you run first service and on fourth step you run second service.
Hope this helps,
Iván.

Passing Parameters to an IAC Iview

I am trying to fill in a field name for an IAC Iview. It renders the requested transaction, but doesn't fill out the field. I am using the ApplicationParameter property with an IAC Transaction iview.
In the ApplicationParameter field I just have one value: <fieldname>=<value>
I am able to get this to work using a web gui transaction iview, and it fills out the requested field ok. However, I have to use a IAC transaction iview because of its abiliy to hide buttons and the transaction box, so any clues as to would be appreciated.
Regards,
Tom

Hi Tom,
Please go through these thread, i m sure they will help you.
Passing parameters (input range/more parameters) to IAC Transaction iView
Passing parameters to IAC Transaction iView
http://help.sap.com/saphelp_nw04/helpdata/en/9e/7d9713087311d7b84600047582c9f7/frameset.htm
Regards
Atul Shrivastava
PS: Award points for helpful answer

MSS Absence Report PT64 not working via IAC iView

We have a problem with MSS regarding the PT64 Absence Report. If we invoke the report via SAP GUI it produces a report using the correct date criteria specified.
If we invoke the same report through MSS business package v 60.1.4 on EP6 SP2, the Selection Criteria iView delivered in the business package launches a new window to display the report using an AppIntegrator IAC iView and generates a URL as follows:
http://server/irj/servlet/prt/portal/prtroot/pcd!3a!2f!2fportal_content!2fcom.sap.portal.migrated!2fep_5.0!2ftemplates!2fcom.sap.portal.appintegrator.sap.bwc.IAC?System=SAP_R3_HumanResources&SAP_IAC=hrwpc_fc_exec&SAP_QueryString=S%3DZMSS%26F%3D*HISRETABS+5%26B%3D18000101%26E%3D20050901%26V%5B1%5D%3DZRPT_D1%26O%5B1%5D%3DP00003582
The report ignores the date criteria passed from the MSS iView. I can see in the URL above that the URL contains the dates I specified in MSS (start date=18000101 and end date=20050901).
So I assume that either the URL is wrong or that PT64 or ITS is incorrectly interpreting the URL?
Problem is, how do I know what the URL is supposed to look like?
And if ITS or PT64 is incorrectly interpreting the URL query data, how on earth do I investigate or debug this.
Cheers,
Steve

Hi all,
I am having the same problem, only I am not able to see any reports, the link appears ok but the screen opens up empty.... Any ideas ??
Regards,
Paulo Poinha

Opening last opened sessions when its start, no thumbnails in the new tabs,

my firefox always opening all last opened sessions when its start,
no thumbnails in the new tabs, its really blank tab, there is no toogle to open thumbnails
i try to "restore to default" in option menu, its only fixed the "opening last opened sessions"
then i try to reset firefox and it solve the problems in a time
then i restart my computer, start firefox, and all the problems came back again
is there any solutions without reintalling my firefox?
Thanks

What is the Startup setting?
*Options > General > Startup: Home page
Is that "Show my windows and tabs from last time" or one of the others?
You can check if you have a user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can also check the settings for "Clear history when Firefox closes" in case this feature is enabled and if enabled then disable this as a test (i.e. remove the checkmark).
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [ ] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Make sure that the disk cache is enabled and working because the thumbnails on the about:newtab page are generated from the disk cache. You can check the on the about:cache page (there should be disk cache section).

IAC iView in Portal

Dear all,
We have an IAC iview which uses the internet service BBP_POC in SRM. This service is to display purchase Orders. When we want to display the versions of a PO, the iview triggers another Internet service BBP_POC_DISPLY. But we are getting an error message that the service is not available:
URL http://<host>:<port>/sap/bc/gui/sap/its/BBP_POC_DISPLY! call was terminated because the corresponding service is not available.
If we observe the above URL, it has '!' at the end. It shoudl instead have '/' or noting at all. But how do we correct the error, since this call happens dynamically by the internet service BBP_POC. There is no iview created for the second service in the portal.
Nny inputs are welcome.
Thanks a lot.
Ramya.

More info:
If i create an iview out of BBP_pOC_DISPLY, and execute it .. it gives me the message "interface contians errors". This might be because it uses the source of BBp-pOC. ANyidea if this error is linked to the previous error " service not available?
Thanks a lot.
Ramya.

IAC iview - Hiding Menu

Hi All,
I have an requirement to display SP02(spool request) in portal. I cant use transactional iviews and IAC iviews with ~WEGUI enabled. So i have created an IAC Iview with the property ~WEBGUI = 0. So that the user can open the transaction SP02 without sap launch pad. I created and its working fine.
My requirement is: I want to hide the Menu and title bar. i.e only the spool request should be displayed. Please help me in achieving this.
Regards,
Anand

See if this helps you :
http://wiki.sdn.sap.com/wiki/display/HOME/Article%2b-%2bEmploy%2bSAP%2bGUI%2bfor%2bHTML%2binstead%2bof%2ban%2bInternet%2bservice?bc=true

EP IAC iview javascript object required error

Hi,
We have installed EP 6.0 SR1 and ITS 6.20 with service pack 19(with hotfix) in one domain. We have created IAC iviews in Enterprise portal. We are accessing the enterprise portal from different domain and we are getting javascript error <i>object required</i> sometimes. This error comes while loading the IAC iview and it comes randomly. But when we access the portal from the domain where we installed the portal & ITS we are not getting this javascript error.
Did anyone encountered this type of error before???.
Please help..
Regards
Vasu

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

EWT IAC iViews

Hi
When I create an IAC Iview for EWT Transactions, the look and feel is very different for these transactions compared to the normal Professional User Transactions.I get a dark blue screen.
I gave webgui = 1 also in the service parameters, but it didnt work.
Murali.
Message was edited by: Muralidaran Shanmugham

are you using integrated ITS?
does this happen only in this transaction? (table control not appearing)
check whether all releavant services are active in transaction SICF?
relevant service for SAPGUI for HTML
check whether all nodes are active (in SICF) under
default_host->sap->public->bc
particularly public->bc->its->mimes
and there is a specific OSS note dealing with your issue.
(if you are on standalone ITS)
<a href="https://service.sap.com/sap/support/notes/684408">EWT Table Controls don't have borders in SAP GUI for HTML.</a>
Regards
Raja

MiniApps & IAC iview

Hi all,
Can anyone tell me the difference between SAP miniapps iview and IAC iview in Enterprise Portal 6.0.
Regards
Vasu

Hi Vasu,
Miniapps is the old name for portlets (iviews) from SAP's Workplace portal. IAC's (Internet application component) is another type of portlet that were developed to run with SAP's Internet Transaction Server (ITS).
Most of SAP's early portal applications were Miniapps or IACs. Most can still be used with EP6.0 portal systems.
Hope this helps,
John

Close sessions on ITS IAC iview

Similar Messages

Maybe you are looking for