CLOSE TRAY MESSAGE ON HP6812 ALL IN ONE PRINTER

How do we get the " close tray " message to stop after every single copy or print job. We have changed paper... closed the tray , floowed all in structions and it keeps showing. Please help me with any troubleshooting ideas. thanks TracyD

Hey TracyD,
Thank you for your question. I'm going to refer you to solutions that have worked for others. Please refer to the following post and let me know if it helps you with your issue.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Officejet-Pro-6830-Tray-Open-Message/m-...
Thanks!
I am an HP employee.

Similar Messages

I am unable to close the lid on my all in one printer j6480. Has anyone else had this problem?

One of the hinges on the lid that opens up to replace the ink cartridges came apart and I am unable to figure out how to put it back. I could not locate this issue in the manual.

Yes but i dont know why
I asume i pressed delete by mistake
But im not shure
It wont backup automaticlly to email i need to send manualy every time
Plus there are no tags
I guess i need to buy pages but i cant buy from appstore in here

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I enable the low ink warning message on the HP 7520 e all in one printer

How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
This question was solved.
View Solution.

ccardwell,
Welcome to the HP Forum.
The following Assumes a Recent Windows Operating System is installed on your computer...
The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
Right Away -- as soon as there is a need for attention
Only when you initiate a print job
The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
Install Full Feature Software – Photosmart 7520
Open the Printer Assistant shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
Toolbox opens > Select tab Advanced Settings >
Under Show Alerts > CHECK desired setting
Click Close
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

Receiving a false paper jam error message for a 6310 all in one printer

I have an hp 6310 all in one printer. It is showing a false paper jam error message with no paper in the printer. I have tried all of the fixes that have been suggested on the website as well as on you tube to no avail. Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer. Does anyone have any suggestions to try to fix this printer.

Do you here any clicks or other sounds when the 6310 first starts up?
I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
When researching the problem, found suggestion that a bad solenoid could cause that error.
After completely disassembling the copier found that wasn't the problem.
I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
Back to the drawing board.
UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
3 page fax came thru.

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

I am a studio graphic designer needing to purchase a color jet printer to handle small business takes. I am trying to decide on the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelop

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

Remove and check cartridge on right error message on 7410 all in one

I recently changed the black ink cartridge in my 7410 all in one printer. After changing cartridge it gave me an error message of " Remove and check cartridge on right". I have tried removing and reinstalling , cleaning connection points with clean damp cloth (water) and still cannot get error message to go away.
Any ideas would be greatly appreciated. Thank You.

NoProblemAtoll wrote:
I know this is an older thread but being it is a top Google result associated with the "Remove and check cartridge on right" error it justifies adding a helpful suggestion for other. Our findings have been HP Printers are very biased against refilled \ recycled cartridges. I own a total of (5)x HP 7310 and HP 7410 printers in my IT Consulting office. These are feature rich MFP’s with an abundant supply of ink available at generously economical prices. On the face of it, it sounds like a good reason to keep a bevy of last gen printers around. EXCEPT the printers work great with the $30-$50 brand new HP brand 96 cartridges from Office Depot or Staples. Unfortunately if you try and buy some recycled cartridges off ebay the Printers detect the recycled\refilled cartridges as a previously depleted HP cartridge that may not be genuine and the units suddenly turn on you. Miraculously the "Remove and check cartridge on right" only manifests itself with non-HP brand cartridges or cartridges that have been refilled. (We have even tried to re-fill out own refreshly depleted cartridges with like results.) Think of it as an HP service reminder conveying you forgot to pay HP their $30-$50 profit on your ink this go round. Remember you need HP Branded ink cartridges (HP = Homogeneously Proprietary). It’s like an intention flaw written into the firmware. Best guess (purely on conjecture) is there is a check in the firmware/drivers for if the cartridges has been previously installed, previously depleted, max install count, and expiration date validation. If it encounters a condition it doesn’t like you get this nondescript error.
[advertisement snipped]
The above post is filled with conjecture and speculation, but is not based on fact. The Officejet7410 is not programmed to reject refilled/reman cartridges. It will check cartridges electrically for various things and will reject cartridges that fail. Typical failures would include a cracked printhead (caused by rough treatment - dropping the cartridge even a few inches for example), or open electrical connections caused by debris on the cartridge contacts. Cleaning the cartridge contacts as shown in the document here may resolve the issue in case of poor electrical contacts.
A cartridge that has been previously used in a different printer will likely be marked as empty, but the printer will happily print with a cartridge detected as empty.
The reality is that the quality of refill and reman cartridges are very variable, but generally poor. The study here has a study conducted by a testing facility, here is another study.
My personal experience has been similar. I donated an HP all-in-one to my son's high school years ago. Sometime later I got a call from the teacher complaining that it was not printing properly. I went and took a look and found they had put in a renam color cartridge that was not printing one of the colors*. They tried another cartridge, which also had a problem and then finally the third cartridge worked. I asked why they used renam cartridges and he said they bought these because they were cheaper. I asked if they were 1/3 the cost....
*The color missing had nothing to do with the printer - blotting the bad cartridge on a damp tissue gave only two of the three colors that would normally be present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twice since i have owned it. Can you help me out as to what I should do with the printer

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

My 2210 all in one printer keeps giving the message "Remove and check cartridge"

My 2210 all in one printer keeps giving the message "Remove and check cartridge." Although I go through procedures outlined in manual, message keeps reappearing. Suggestions?

Hello again!
Still having problems but here's more info: Checked "Resume" but Message next to the job says ERROR but that 'Pinter is ready'.
However, on the PRINT & FAX page in System Preferences it has 'Idle' next to the psc1317 (default) printer.The computer scans the document but wil not print it. With printer off I disconnected the power cable and the USB from the computer then re-connected after 1 minute. When I turned the printer back on it printed the test sheet but not the document. I have also unistalled then reinstalled the hp1317 Snow Leopard software and driver and computer says that all software is up to date. Apart from a dodgy connection I have no idea where to go from here!

Keep getting printer error message. Have apple compr using hp ohotosmart c4680 all in one printer.

I am having problems printing from my IMAC computer. I am using photosmart C4680 all in one printer. I have repeatedly uninstalled printer and reinstalled printer from original disc. Error message coming up when I attempt to print. Used to print from Hp officejet printer d145. I began having problems with it. I have discontinued printing from it and I have uninstalled software from that printer. Error message states "Library/StartupItems/HP All-In-One Communications" has not been started because it does not have the proper security settings" message comes up when starting up computer. How do I correct this problem?

I recommend that you take a look at the following document. It should help to resolve your issue.
hp printer/scanner/copier 900 series software/driver
Try that and let me know if it works for you or not. If it doesn't let me know what happened and I will see what I can do from there.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Looking to Buy a New All-In-One Printer

I am looking to buy a new all-in-one Printer.
I have been using the Epson RX620 for a little over a year and have had great print results. Unfortunately I get a warning message yesterday that the printer needs servicing and nothing will work. After getting much less than desirable results from their Customer Support I am moving away from Epson, after three different Epson printers.
I have heard many good things about Canon printers. We will be printing bunches and bunches of photos(two small daughters + graphic artist wife = many, many photos). I am presently looking at the Canon MP600. Any goods or bads about said printer?
We do want a printer that can use cheap cartridges so HP is out of the question. Any other recommendations is appreciated.
Thanks in advance for your replies.
Nick

The only thing that ****** me off about Epson is that they shut down their toll free phone tech support!
I had to rely on their email support to set up my new Epson printer (CD/DVD loading tray) which wasn't so bad as it was very detailed & hands on. I just couldn't understand their manual. I was having one of my "senior moment" days.
Those Canon printers are handsome! I almost ended up getting one. But, the Epson printers won because they are the only ones who can print directly on CD/DVDs & all the software is included.

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Deskjet 3520e all in one printer network problems

Hi All.
I have a brain teaser for the technical types out there hoping someone can shed some light on a weird sort of problem.
History: All has been fine with my g6 Pavillion latop 64bit W8 and 3520e all in one printer and working as always very well.
Oct 16th 2014 My broadband service went down and after many communictions with ISP eventualy received (Nov 4th) and installed a new "super hub modem".
OK so far, Managed to connect laptop via wireless router and connect to internet etc., however . . . I cannot get my printer to network as before, I can use it via USB port but if I try to network it, The Cyan ink cartridge reports as being broken or damaged even though 3/4 full and will not allow printing, but when connect via USB port the Cyan ink cartridge registers normal and will print as expected.
Has anyone else come across this problem?
If I go down the route of uninstalling and reinstallin the Printer software is there a set order in which to do so?
In the list of programs these four are shown. .
HP Deskjet 3520 series Basic Device Software
HP Deskjet 3520 series Help
HP Deskjet 3520 series Product Improvement Study
HP Deskjet 3520 series Setup Guide.
I would like very much to get back to network printing if at all possible.
The router IP address is 192.168.1.3
The printer IP address is 192.168.0.1
I have been led to believe that as the addresses are so close this shouldnt be the cause.
I must add that in the past I have had occasional printer software problems which I was unable to resolve without help from the technical centre and I would prefer not to restart the installation if at all possible.
Your comments would be appreciated.
Thanks in advance.
Un1corn.

Hi @Un1corn
What exactly happens when you try to convert from USB to Wireless and configure the printer to the Virgin Media Super Hub? Do you get an error message of some sort?
Maybe there is a firewall on the Super Hub. Do you have the model number for this device? I can look up some information to see what could be casing the issue.
In the meantime, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

CLOSE TRAY MESSAGE ON HP6812 ALL IN ONE PRINTER

Similar Messages

Maybe you are looking for