Close010 error when reversing old posting in ECC6,0 with MR08

Hi all,
I posted an invoice through tcode MRHR in release 4.6C and I want to reverse it in release 6.0 via tcode MR08.
Tcode MR08 displays the document but I received an error message : Systemerrorin CLOSE 010.PleasecontactSAPsupport when I try to save.
We have a lot of old documents that need to be reversed in ECC6.0. They where originally booked in 4.6c
So far all I can think of is to do it manually. But there are a lot of documents. In OSS I cannot find a note about this issue. Does anyone have a solution for this ?
thanks in advance
John

There is a not available. Please find the relevant note and apply.

Similar Messages

Error when reversing settlement back to Auc - Balance in transaction curren

Hi,
We get following error when reversing a settlement from asset back to Auc (using AIST):
FI/CO interface : Balance in transaction currency
Message No. RW022
This error only occurs when we settle a portion of the amount sitting in AuC and not the full amount. (When we settle full amount in AuC to final asset we can reverse no problem).
When we do a partial settlement to final asset, SAP creates a document and in that document it posts a debit and credit for the unsettled amount e.g. 50k in Auc and we settle 45k to final asset with 5k remaining in Auc - the document looks as follows
AuC     5,000.00-
Auc      5,000.00
AuC    45,000.00
Final Asset    25,000.00-
Final Asset    20,000.00-
The 5k above is the unsettled amount still sitting in AuC
When we try reverse we get error message RW022 and detail is as follows:
    The balances in transaction currency must be zero for each logical
    transaction when transferring to the FI/CO interface. A balance of "
    5,000.00-" "CAD" was determined for the logical transaction "AZVZ".
System Response
    The FI/CO interface does not process any transactions which have a
    balance in transaction currency other than zero.
Procedure
    This is a system error of the calling application.
Note: We do use line item settlement in asset classes
Much appreciate any help..

Hello,
You may need to check SAP notes below regarding this issue:
1523814   Transaction AIST ends with error RW 022
1514384   Error message RW 022 after Note 1444750 implem
1444750   Postings without transaction currency
I hope it helps.

Error when run Depreciation Posting Run AFAB

Hi,
I found error when run Depreciation Posting Run for period 7 2007.
FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below.
Error Message:
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting depreciation, a document has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
Can any one help how to solve this issue?

Hi Paul,
Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
No Year From No          To No           Current No          Ext
03 2001   0300000000   0399999999   -                          /
03 2002   0300000000   0399999999   -                          /
03 2003   0300000000   0399999999   -                          /
03 2004   0300000000   0399999999   -                          /
03 2005   0300000000   0399999999   -                          /
03 2006   0300000000   0399999999   -                          /
03 2007   0300000000   0399999999   -                          /
03 2008   0300000000   0399999999   -                          /
03 2009   0300000000   0399999999   -                          /
Referring back to Asset Accounting, the Reference Document: 19.
Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
Can you guide me more details on it?
Thanks in advance.
Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

Error when attempting to merge into table with RLS - ORA - 28132

hey,
i've encountered an "ORA-28132 - Merge into syntax does not support security policies" when attempting to merge into a table with RLS defined on it.
i looked around and found this [discussion |http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:259415261270] on ask tom.
according to the thread - this was a bug in 9i. in 10g merge is possible only if the policy returns "null" and in 11g it was finally fixed.
*i have been able to merge into tables with rls in 10gR2 in some cases.*
i would like to know if anyone has some more information about this error. when can i merge into tables with RLS ?
thanks, Haki.

Never.
The bug was that it did work sometimes in 10g i.e. it should always raise an error.
It's something that I've always found a bit odd and frustrating - that MERGE and RLS policy should not be compatible.
But bottom line is that you shouldn't be using MERGE on table with RLS policy.
Edited by: Dom Brooks on Feb 14, 2011 10:51 AM

Error when tryying to burn ny dvd with Encore

I am getting a error when tryying to burn ny dvd with Encore
PCG "baseball_and_more" has an error at 00;00;00.
Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
Anyone know what this is due to?
If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

First, back on the main page http://forums.adobe.com/community/encore enter
pcg
into the SMALL forum search window on the right and read previous discussions
Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

Internal error when Internal job posted

Dear all,
We are getting Internal error when employee applies for internal job posting. In E-rec -> employee page-> Apply Directly page, after selecting the requisition when application is posted via send application button, ESS gives error message that
Intenal error occured. Please try again later.
I have checked the SLG1 Log and founc following errors:
Serious error; see log
The error occurred in program CL_HRRCF_POSTING_INST_BL======CM009 line 55
GUID 4DAE37B6BB4400CAE10080000A3C019A is not linked to any posting instance
The error occurred in program CL_HRRCF_POSTING_INSTANCE=====CM00Y line 47
It seems job posting is not done properly. I hve checked the application status and it has Draft status. It should be posted.
Please let me know how to resolve this issue.
Regards,
Mihir.

Dear Deepak,
The issue is, I am not able to post the job. As a result job remains in draft status. So job status can not be released.
I analyzed the issue further and found that this issue is encountered for old users which were present before E-rec gone live.
We have maintained necessary BP, CP, NA objects for these users. But issue is present only in Internal job posting.
Users created after E-rec live does not face this issue.
Is there any perticular table where entries are missing for old employees?
We are having the E-rec system on the same server and BADI HRSYNC_P is activated.
Regards,

Error when Reversing metadata from HFM

Hi,
I'm getting this error when i try to reverse metadata from HFM.
"com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver."
I already try the suggestion in this forum including
Cause
The Java Library Path of the HFMDriver.dll is missing in Wrapper configuration file.
Solution
1. Backup and edit the ODI_HOME\tools\wrapper\conf\snpsagent.conf and include the following entry in Java Library Path section :
wrapper.java.library.path.2=../drivers
After adding it will look as follows:
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../tools/wrapper/lib/
wrapper.java.library.path.2=../drivers
Note: HFMDriver.dll is usually present in <odi_home>\oracledi\drivers folder. If it is located in different path, then appropriate location should be referred. Also numbering convention like wrapper.java.library.path.1, wrapper.java.library.path.2 has to be in a incremental manner and no duplicates nor gaps should exist.
2. Save the file and recreate the ODI Agent Service with the new configuration parameters as the classes are loaded during its creation and re-test the issue.
But it still errors. Does anyone know another solution?
Btw, i'm using ODI 10.1.3.5, and the HFM's version 9.3.1
Those two are not on the same machine. And i've already installed HFM Client on ODI Machine.
Thanks in advance.

Ok, i've solved the problem above. Looks like i forgot to define driver folder in PATH variable.
But now i got another error.
Looks like the problem lies in HFM now.
It's said that Server/Cluster incorrectly configured. But, in my HFMClient i've successfully access the application.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx0.f$0(<string>:38)
     at org.python.pycode._pyx0.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at com.hyperion.odi.hfm.wrapper.HFMConnection.<init>(HFMConnection.java:57)
     at com.hyperion.odi.hfm.wrapper.HFMServer.getConnection(HFMServer.java:89)
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:52)
     ... 33 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Opening HFM application failed. Error code: 0x80041143 [Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection.]
     at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getConnection(Native Method)
     at com.hyperion.odi.hfm.wrapper.HFMConnection.<init>(HFMConnection.java:51)
     ... 35 more
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Thanks in advance...

Error when uploading SAP query in ECC6 from 4.5B system

Hi expert ,
I have down loaded SAP Query(infoset) from 4.5B server and now i want to upload this query to ECC6.0. when i upload this query(infoset) to ECC 6 as follows to download step like from SQ02 . but after executing i am getting error
" infoset ZTEST (import option REPLACE)"
" F | Error When generating Transport dataset
I am following all steps even created user group in sq03 which it is in my 4.5b system.
Thanks
Chandra

Hello,
It won't usually work when you try to download a infoset from a older release and try to upload in a newer version. However there is a workaround for this.
If you debug the program while uploading, you will notice that certain if conditions fail on a few fields in the file you are trying to upload are missing. What i would suggest you to do is, download any infoset from your ECC 6.0 version and keep it as a reference for filling these missing fields into the older version infoset you are trying to upload.
Vikranth

"Sorry, this content is not allowed" Error when trying to post a reply.

Has anyone else seen this error lately when trying to post a reply?
Just to be sure.. I remove all the formatting and just used simple text.. Still the error persists.
It works for some other posts in the same forum too.!
Eg.. I am unable to post a reply to this thread
List the files in a folder
But was able to do so for
control file question
Let me know if any of you have seen this and have a workaround/solution :)
Thanks,
Rajesh.

Rajesh Chamarthi wrote:
I dont think it is an issue with specific words trying to be spam filtered....No content I tried to post i the reply went through.
As I put in the earlier post,just the words "test" didn't work either.
Another post i made had the same words and it went through fine..Hahahaha </sarcasm> ... I was wondering if the issue was to do with the subject, and was jokingly thinking that if the poster had a norty word (eg. l i s t) in the subject, that maybe they'd be allowed to post, but replies wouldn't be able to.
Imagine my surprise when I opened the post you had problems with and found it has... l i s t in the subject. Head, meet desk.
Fail?! *{;-)

Error When Trying to POST: Method not implemented in data provider class

Hi Experts,
I have created an Odata Service using Netweaver Gateway Service builder. I am using Advanced Rest Client to test the service. I can successfully GET my data, but I run into issues when I try and POST new data.
When trying to POST, I used the GET method to get the x-csrf-token, and added it to my header. I also updated the body XML with the data that I would like to POST. However, after sending the POST request, I am getting a "500 Internal Service Error" with the xml message "Method '<OdataServiceName>'_CREATE_ENTITY" not implemented in data provider class".
Any help on this would be greatly appreciated. Thanks!

Hi Kelly,
Can you share screenshots of the error? Maybe something wrong with payload :can you share the same also? Did you try to debug it by putting a breakpoint in the CREATE_ENTITY method in the backend? Any luck?
Regards,
JK

Error when try to post new thread

Dear SDN team
Currently there are and error when posting NEW thread in the forum :
"SAP Community Network Forums » Application Server » Web Dynpro ABAP"
The error is a 501 / 505 saying :
POST to /post!post.jspa not supported.
Best regards
Lars

In my case, the VM Server was set to use DHCP. Once I reconfigured the interface to use a static address, I was able to successfully create the Server Pool.
Documentation should be reflected to clarify this.

Error when reversing DP90

Hi
I have a question please....when reversing the DP90 in order to correct material issued to the order, or other reasons, whenever I try to perform the DP90 again I get a error message stating that Charact combinations w/o material assign in DIP profile ZSERBIL1, it gives me the cost element and cost center. I am not sure why this is haapening after a reversal or how to correct it...please advise...points will be awarded...thanks in advance

Check the following in your DIP Profile:
Usage: check taht there is a setting for 'B illing and results analysis"
Characteristics: check that the cost centre and cost element checkboxes are set for "Mat.determination"
Material determination/Criteria: check you have a valid combination for your cost centre/element
Also run TCode ODP2 to check the consistency of your DIP Profile
PeteA

Close010 error when reversing old posting in ECC6,0 with MR08

Similar Messages

Maybe you are looking for