Closed captioning line break

Is there a way to add line breaks to the closed captioning within Captivate? I've been copying and pasting my text from Word and adding the line breaks there. But sometimes you just need a line break right way and don't want to use Word.

Yes. Open the Slide Properties for the slide containing the CC you wish to edit, then click on the Audio Tab. Now, Click on the Closed Captions button and a new dialog box will open containing your CC text. This is where you can control timing of your Closed Captions as well.
Hope this helps!
randy

Similar Messages

Removing closed caption line 21

This might not be a topic for this forum, but I thought it was worth a try.
I work at a TV station where we recently relaunched our master control that is now 100% digitally managed. All of our programming, commercials, etc is Quicktime run by software called BugTV. Here's the problem.
We run programming with closed captioning and then using BugTV software and a Kona card, we add a station ID bug (Quicktime Animation codec RGBA) ontop of the programming.
What is happening is the two Quicktimes running simultaneously takes out the closed captioning. There is a collision of the two sources of line 21 that removes the captioning all together. Without the staion ID running the captioning comes through just fine. AJA tech support suggests we wipe out the line 21 on the bug (RGBA) file and it should allow for the underlying programming closed captioning to pass through.
My question, is there someway to remove line 21 from a file or scrub it clean so it doesnt interfere with other sources? Does anybody have experience doing this?

I managed to solve the problem with the help of the people at Bug TV. If I render the motion logo .mov at 720x486 as opposed to 720x480 it allows the closed captioning from the programming to pass through without a problem. I'm not sure how or why but it works.
Thanks for your help and interest Tim. I do have to correct you about our mater control set up. We are operating a fully-functional master control via Bug TV software without any hardware apart from a PowerMac G5, Kona card for running downstream keys and a 48 Terabyte video server.
All of our programming is ingested from tape, managed and played back on-air using Bug TV software. Like I said before, it's quite incredible and is, in my opinion, the way TV stations will be run in the near future.
Tape? What's a tape?

Line Breaks missing in captions from other programs...

I've spent the last few hours searching around, and I've been unable to find any solution to a weird thing I noticed.
I've recently purchased LR 3.4.1 and when I imported a handful of older pics that had had the captions set using Bridge, the line breaks were now gone.
I then went to Bridge and tested it, and sure enough, it can read line breaks from LR, but the opposite doesn't seem to be true. As part of my work, I get a bunch of photos that other photogs have shot and added captions to via Bridge, but I can't seem to find any check box or setting on how to get LR to read the line breaks.
Any one have any advice on how to get LR to read line breaks from other programs? I'd hate to have to go through and re-caption each and every single photo, especially when adding the older ones into LR to use it as a DAM.
Thanks!

This is a long-standing, annoying bug in Windows LR that has been acknowledged by Adobe:
http://feedback.photoshop.com/photoshop_family/topics/newline_bug_in_caption_text
Please go to the feedback site and vote for that issue to get fixed.
It is just a display problem in LR -- the line breaks in the metadata are preserved, and if you enter line breaks in the metadata, they are preserved too.

Closed Captioning short line issue.

I am having an issue with Closed Captioning in Premiere Pro CC 2014. Whenever I create a caption that is very short, say, the word "No." or any combination of characters that is short, it screws up the following captions.
When the file is played, the caption previous to the short one feeds (in motion) across the bottom of the following caption in a single line.
Very strange. The only remedy, so far, is to eliminate the short caption.
Anyone else having this issue?

The duration doesn't seem to be the issue. It's the number of characters in the text. Although, I guess that the duration on those caps are shorter. I've resolved the issue by making the text longer. For instance, I had a caption that simply said, "No." I changed it to, "(giggles) No." and the corruption went away. Once, I couldn't click the center position block without the caption disappearing. Only leaving the caption in the flush left position avoided the corruption. Just had the issue again, with a short line. The only way around is to combine words in a slightly out of sync fashion so that there are more characters in each caption.

Preserve line 21 for closed captions

Is there a way to preserve line 21 in FCP to keep closed captions that have been created for a sequence. I am creating the closed captions in MacCaption and adding them to the sequence, but when I master to DigiBeta they are gone. Any ideas?

Hi,
Found this PDF link think it might well cover what you are trying to do it does describe the process using MacCaption.
http://www.cpcweb.com/Captioning/CaptionSoftwareOverview.pdf#search=%22closed%20 captions%20to%20digibeta%22
Hope its of some use until someone can give you a more specific answer

Closed Captioning with CS4 Premiere

I need
to create closed captioning in CS 4 Premiere. But don't get confused with subtitles; I am talking about the cignal that is encoded on line 21 of whatever goes on air, and viewers can watch at home.
I used to do it in AVID using a simple software that created JPEGs, but it won't work with Premiere.
I greatly appreciate any info. Thank you.

Though for En CS5, this is the start:
Closed captions basics
About closed captions
Closed captions provide assistance for the hearing impaired. Through captioning, the audio portion of a program appears as text superimposed over the image. Closed captions include dialogue, as well as descriptions of sounds in the program. Only the NTSC television standard accepts closed captions; PAL does not.
You create closed captions using a third-party captioning application, exporting them as source safe format (SCC) files. You then reference the SCC files by assigning them to clips in a timeline, using the Video Clip Properties panel. Closed captions will synchronize with the source timecode of the video clips you assign them to.
Note: Closed captions are not supported for Blu-ray or Flash projects.
Add closed captions to video
Closed captions that you add to your DVD project will only appear on the final DVD; they do not appear in Encore, in either the Monitor panel or Project Preview window.
1 In the Timeline Viewer, select the video clip to add closed captions to. If necessary, Alt-click (Windows) or Option-click (Mac OS) to select the video track separately from its audio track.
2 In the Video Clip Properties panel, click the Browse button for Field 1. Locate and select the SCC file that contains the closed captions, and then click Open.
Note: Moving the SCC file or the Encore project file will break the links to the closed captions. To reset the links, repeat these steps to select the video clip, click Browse in the Video Clip Properties panel, and reselect the SCC file.
That was from Page 149 in the CS5 PDF.
Hope that helps,
Hunt

Exporting EPUB from InDesign CC not including line breaks

I am done with a book and have it formatted the way I want. I am exporting it to EPUB through InDesign CC and previewing it in iBooks and also through Kindle previewer. Everything is fine except for one thing... where I have created page breaks, the exported file is not including them.
I tried exporting to HTML just to see what it did and there is no line breaks there. I know its proprietary markup ( in kindle ) but I still would like to include them in a few specific places ( to mark seperations of chapters ).
In kindle this is the tag they say to use: <mbp:pagebreak />
In iBooks, I have not yet figured out how to create them, I am going to work on that today once I sort out the kindle version.
Is there any way to force it to include line breaks on export. Or alternatively, I could export to HTML but I am having trouble figuring out how to go back to the EPUB format from there and also it didn't include the fonts, so there was other issues to consider as I have a custom font I was using for the headers that looks really good and matches the font on the book cover as well... so I really want to keep that consistent if possible.
Are there any tricks or things I can try here to improve on my workflow and do a better job of seperating the chapters ?

Ok, I hadn't tested the advanced options out in the export menu. It works and does so on both the iBooks and Kindle previewer.. which is good news since that is really important to me to try and find a workflow I can update both of these formats from when I continue to work on my book.
The only strange part is that on some chapters its adding an extra blank page between the chapter and the next. What is odd is that it only happens on some of them (in the iBook reader only, the kindle previewer isn't doing this)
I am going to look into this more closely but its not a major deal as I would prefer a little seperation in the chapters anyways, its not really a bad thing. It is just hard to figure out why its doing this.

Closed Captioning not showing up at specified In / Out points

Hi all,
I recently upgraded to a trial of 7.2.1 (I'm a *long* time CS user) and am having an issue with closed captioning that's got me pulling my hair out. Upon importing a .scc file and inspecting it in the captions tab, I have all the captions I'm expecting at the proper timecodes (for example if I look up the start of a line in the program window the start timecode matches the "In" timecode listed in the Captions tab).
However upon playing the timeline and turning on Closed Caption display - the captions are not displaying (nor disappearing) at the in/out timecodes listed in the caption tab. They're showing up (roughly) seven seconds later at the beginning of the program, and over 11 seconds late by the end of the program.
Does anyone have the foggiest idea how to resolve this? I guess it's possible it's just a player issue and the issue will correct itself on output, but that's not really comforting. I could do what I need on this job by renewing my license for some other software, but Premiere would be a more versitile use of my limited software upgrade budget - but only if it can actually do the job properly.

Hi Mark and monstremoi,
With all the fiddling I've been doing in raw captioning files the fact that I didn't just try increasing the hight of the track is completely rediculous. Lo and behold, there are the handles! Once I could actually see the captions in the track I noticed something interesting - that the .scc and .xml files are being interpreted quite differently.
If I take the same caption source file and output one xml and one scc and lay them on top of each other, this is what it looks like:
The XML is starting immediately at timecode 0, even though the first start time should be 4:06 (weirdly the scc is actually starting at the right time code in this test, something it's refused to do previously).
If I manually set the offset of the first caption by forwarding the xml caption track to 4:06 we get this:
*This* XML track seems to play out synchronous with the program albeit with some odd formatting (it doesn't appear to be reading any of the font positioning information from the timed text file, it's just playing everything top frame, justified left.
Already though up above you can see though that although the SCC stars at the right timecode, it's starting to drift out of sync less than 30 seconds in - which doesn't make any sense when both have been output from the same 29.97 timebase source.
Monstremoi - to answer you questions, no I've not done any captioning work in premiere pro previously. I actually didn't even know it was a feature until I read about the improvements in CC. Most of our captioning files come from Annotation Edit (zeitanker.com). If they're not prepared in AnnotationEdit / AnnotationTranscriber, we usually do some conversion work through it before outputting (usually to set offsets or whatever if we're adding presentation cards or something).
Happy to send you files to pull apart - although I'd rather not post them as a forum d/l link. Do you have an e-mail I can send them to?

Open with "Closed Captioning" on, or always show CC

I want to have my projects start with "closed captioning". I tried to down load the little SWF file, from the third party, recommended elseware, but it doesn't seem to work. It says it was made for Captivate 4, and I'm using 5.
Any help? Is there another way to set CC as the default?

Robert, I think the issue here is that after you insert the new slide and drag it to the first of the presentation, you then defeat the purpose of adding the new slide because you then configure THAT slide to execute the advanced action to set the variable.
The point of introducing a new slide is to introduce a delay that gives the presentation time to "settle" before turning on the Closed Captioning.
The bottom line is that you insert the slide, move it to the beginning and configure the timing for perhaps .1 or .2 seconds. THEN execute the action on the SECOND slide.
Give that a try and see if things improve.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

Line Breaks are not appearing in Production system

Hi,
In my company users have one problem, which I am not getting the same either Dev or Quality. I tried to replicate it but I am getting fine without any issues. Issue is users create sales order in Interaction Center by using the credit cards. We wrote the code to pop up with the information about the amount being deducted against each card( users can use multiple cards) once the order is saved.
Below is the code in one method of the class. lv_text contains the information like 'Visa 3002 for amount 1209.00 is authorized(#1567)'
CONCATENATE lv_text ' ' INTO lv_text SEPARATED BY cl_abap_char_utilities=>newline.
Problem is in Production we are not getting line breaks whereas I am getting fine in Dev and Quality with the above code. In production, users are getting below. There is full stop between the amount(#1567$) and .
Visa 3002 for amount 1209.00 is authorized(#1567). Visa 5443 for amount
1300 is authorized(#7654). 
But in Dev and Quality the same above message we get like below, which is correct.
Visa 3002 for amount 1209.00 is authorized(#1567).
Visa 5443 for amount 1300 is authorized(#7654).
I changed personal layout values in the Personalization and tried but no use.
Can anyone help me in this regard?
Thanks,
Baasanthi.

Hi Andrei,
I am closing this issue as it is being taken care by team lead.
Thanks,
Baasanthi.

HT4613 Is it normal that closed captions do not show in the trailers and other promos, even if they are present in the movie? I don't want to pay to rent a movie that supposedly has CC if it doesn't show up on the samples.

I want to rent some iTunes movies with closed captions, but in order to confirm that the CCs work, tried watching the trailers first. I have CCs enabled on the iPod touch, but no captions showed up on the trailers or promos. Is this normal? Can I be sure that if a movie is marked with CCs, that they will be there if I rent it? Thanks.

Hi Karen
Unfortunately you will likely end up implementing either a totally manual system (meaning you just add a line at the top of your topic with your breadcrumb trail as you wish to display it, then link as needed) or you will have to resort to some third party solution that isn't part of RoboHelp's features.
You might also take a moment and suggest to the RoboHelp development team that we need some flexibility with this aspect. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Vhs to dvd with closed captioning

i was able to transfer video clips from a vhs tape to a dvd (vcr > camcorder > mac) in iMovie then export to iDVD and burn the disk thereafter. I need the closed captioning to be tagged along to a dvd disk. How?
Thanks

The National Captioning Institute (NCI) could also be helpful. Here's a site with info on decoders (so if the TV option didn't work, you could possibly use a process like VCR/decoder/camcorder/to Mac
http://www.ncihelpdesk.org/index.php?c=30&kat=Decoder%2FAudioLink
Here's NCI's description of captioning, "Closed captioning is the process whereby captions are converted to electronic codes and inserted in the regular television signal, specifically on Line 21, a portion of the picture normally not seen. There are 525 horizontal lines in the television picture. Line 21 appears at the top of the picture and occurs just prior to the start of the lines carrying picture information." (see www.ncicap.org)
John

Add Closed Captions to Button Audio?

Can you add closed captions to the audio file that's linked to a button? This is different than adding closed captions to the slide's audio file. I have a single slide with 7 "Next" buttons. Each next button includes a short audio file. I'd like to add closed captions to each of these audio files. But I can't seem to find a way to do it. I think the short answer to this question is "nope." But I wanted to check here first before I started re-doing the layout to break the slide into 7 separate slides. . . Thanks!

Hi there
Indeed the short answer is no. However, if you are using Captivate 4, nothing says you can't be creative! Why not have some standard Text Captions that are hidden until you click the Button? Then they could serve as the "Closed Captioning" for the Button audio? As each button is clicked, it hides the other button's "Closed Captions" and presents its own "Closed Caption".
Just musing out loud... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can you do Closed Captioning on FCP HD

I have been using FCP to create a few TV programs and need to create closed captioning, but I can't seem to figure out if I can use FCP to generate closed captioning.
Anyone know how to create closed captioning in a FCP environment?
Thanks,
Wil

Wai a second. So my clients won't know the difference between subtitling and the closted captioning? Does subtitling run on line 21 as well?
<
Well, I've never met your clients but 90% of mine have no clue.
Subtitling is permanently burned into the image. Could be another language but could be the native or local language written out for the hard of hearing or to make poor audio intelligible.
Captioning (open/closed) is user-activated at the playback device. All TVs have CC switchable display. But there are several flavors of captioning including multiple language encoding.
bogiesan

Closed captioning line break

Similar Messages

Maybe you are looking for