Closed Indicator in PR automatically Tick by click on Delivery Comp. in PO

Hi,
When we create a PR with 10 Qty..create PO with same quantity..and create MIGO for 6 Qty. Now we want to short close the PO.
Now Requirement is: -
Can the closed indicator in PR be made to get automatically checked once the delivery complete indicator in PO is ticked..??
Please guide..

you can close the PR from PO thru item> delivery schedule. on the extreme right of the line item in the schedule you get a button to close the PR.

Similar Messages

Error: Automatic tick on FOC indicator while creating Purchase order

Hello All,
Our client is going through one issue that when they are creating PO by ME21N,after putting PR and line item and plant,it is automatically ticking on FOC indicator and then in invoice tab the field Inv.Receipt and GR based IV automatically gets disappeared, when we untick FOC field then it shows the Conditions tab. but we cant add any condition in PO item wise as we add any condition it again gets tick on FOC and price and tick on invoice receipt,GR based tick we have to do again.
I have added plant in vendor master record.
Please do needful.

you said "I have added plant in vendor master record."
So you are talking about intra-company or inter-company stock transfer?
Are the the shipping plant and the ordering plant in the same company or in different companies?
Please explain a bit more detail about your process, somewhere you must have a deviation to the standard stock transfer process. I think it is one, otherwise I would have to ask why you added the plant to the vendor.
you wrote:One thing is that we are facing this problem only for one vendor so we tried by deleting info record,but didnt work properly.
you actually tell this as if this is an external vendor, I would expect that you know the names of your sister plants.

Set automatically closed indicator in PR while contract/agreement created

Hi experts,
Is there any possibilities that we can set automatically closed indicator in PR while contract/agreement created?
Normally, PR closed indicator is set when PO created refer to the PR.
Is there any IMG configuration to utilize this matter?
Thanks
MD

Hi,
You can try this using the Userexit in PR.So once the RFQ or Agreement is created for the PR then the ststus will be changed.
Check this user exit.MEREQ001 Customers' Own Data in Purchase Requisition
Regards,
Raj

Config settings for Closed indicator in PR

Dera experts ,
I want the system to automatically set the "closed " indicator in PR "quantity/Dates" tab , once a PO has been generated ( fully/partially ordered)
Can anyone tell me the settings for the same ??
Regards
Anis

Hi frnd,
I dont think so that there is any such config for "closed" tick.
We have to manually set the tick either in ME52N or buyer can set the tick at the time of PO creation.
In ME21N ( buyer have to goto Item Detail - Delivery Schedule - Click PR closure tab).
Or you can Create a BDC and create a Z program and Z t-code and ask user to run the same for bulk PR line item closure.
I hope this will help.
lets see what others have to say about it.
Regards,
Amit P Hiran
njoy SAP...
njoy Lyf....

Error: Automatic tick in free Item in purchase order on line for specific vendor

Hello All,
Sales order is created then running mrp through MD01,requisitions are created.while creating purchase order for a particular vendor it is automatically ticking on free item indicator and giving error as material is not maintained in the plant (XXX) Free trade. while PR is not created for plant(XXX).
i have checked they are not doing any transaction in plant (xxx).
Please do needful in above issue.

Hi all ;
Can you share screen-shoots for your sales document ?
1-What is your sales document type ? Go to VOV8 find it and share.
2-What is your item category for this sales order? Go to VOV7 find it and share us.
3-What is your schedule line ? Go to VOV6 find it and share us.
Regards.
M.Ozgur Unal

Closed indicator in PR

Hi All,
I have question in PR closed indicator, whether it set automatically once we create PO for full quantity of PR or not.
We are using ECC 5.0, it is not setting automaticaly after convrting PR to PO for full quantity.
And please let me know the use of Set reqs. to "closed" in ME59N transaction.
Thanks in advance.
Regards,
Sandhya

Hi Sandhya,
I have question in PR closed indicator, whether it set automatically once we create PO for full quantity of PR or not.
No, this activity will never happen in standard SAP. You have to do it manually only in Me52N.
Purchase Requisition Closed
Flags a purchase requisition as closed, that means that no further purchase orders are to be created for this purchase requisition.
Use
You can:
Set this indicator manually
In change mode for a purchase requisition on the item detail screen
When you create a purchase order with reference to a purchase requisition
Have the system set the indicator when automatically creating purchase orders from purchase requisitions
You can use the indicator Set reqs to "closed" to specify that the purchase requisition is considered closed once the associated purchase order has been created, even if the complete requisition quantity has not been ordered.
Dependencies
A purchase requisition can, for example, be archived once it has been flagged as "closed", although the complete requisition quantity has not been ordered.
Rgds
Utsav

Voice-overs: How to *automatically* remove breaths, clicks; improve voice?

Hi, i edit voice-overs for tutorials (not commercials) in Audition CC 2014. I know how to manually edit out
- breathing, inhalation (just ahead of a new sentence)
- clicks
I've read some and tried some, but still don't know how to
- edit out breathing *automatically*
- edit out clicks automatically
- do "fade out – almost silence – fade in" automatically
- give more substance to my voice with a filter
When editing out breathing manually, usually i replace breathing by "silence" (don't simply cut it away). But sometimes i would like to replace breathing by "fade out – almost silence – fade in", which sounds more natural. I can do this manually (and assigned keys F1, F2, F3 to the three commands); but can i do "fade out – almost silence – fade in" automatically?
My initial recording is not too bad, but i want to give my voice a little more "substance". I tried the recommended "Broadcast" filter, but it sounds to flashy and aggressive. There is another filter called "Male Voice" (or some such), but it seems not to change anything.
I also wonder: If i
- use a filter
- edit clicks and breathing manually,
should i apply the filter before the manual editing? I think i should, because breathing and clicks sound different after filter and shoul be judged with filter applied. But then – if i decide to remove the filter, it would be better to apply it at last.
So here are my questions:
- Is there a controlled way to remove breathing and clicks automatically?
- Which filter gives my male voice more substance without "blasting"?
- How to "fade out – almost silence – fade in" automatically?
Thanks!

Steve, thanks for more good advice including positioning of the mic!
I am just an amateur - a text writer who was forced by ruthless customers to not just produce manuscripts, but also video tutorials, w/out knowing how to, but wishing not to sound as "garage" and "panting" as many others on YouTube (apart from "verbose"). So for my "productions", i write, speak and edit all in one.
The microphone is a USB Blue Yeti, which looks roughly like a tabletop lamp. It seems popular. I set it to one-directional recording (only front direction.) I have tried about ten different mics, including even more expensive headsets, but i get the rather most consistent results with the Yeti. I also use a windshield (got better recordings after starting to use it) and for recording, i build some kind of tent with woollen blankets on top of a table (so that i can stand upright and talk in a "muted" space). Before and while talking, i will drink buckets of warm water or herbal tea perhaps with fresh lemon, nothing cold, no coffee/black tea/dairies; i've experienced this helps. I've still to understand how to harrumph best.
On the laptop used for audio recording i can't run Audition, but i record with the freeware Audacity (is that audacious?), save as .flac and edit on a different PC in Audition.
On the expensive headset microphones i tried, i heard more breathing and – to my surprise – more up and down in volume. I have some, but less, variations in volume also with the Blue Yeti files; so sometimes in Audition i have to change a single sentence by 1,5 or 2,5 dB. I wish that could be done automatically, but perhaps it can?
Previously you also said that breathing is natural and should stay in the audio. I don't want to fully keep the breathing in – that might be ok for some emotional music or movie, but not for tutorials. But i'd prefer to lower rather than fully suppress breaths; that's why i asked for automatic "fade out – almost silence – fade in". I can do this by selecting three different bits of audio and then select three different commands (now by keyboard shortcuts). But it's too much clicking and i might simply glue silence over most of the exhaust sound.
I've also tried to wear a headphone during voice recording, closed as well as open headphones. It confused me no end, i was literally speechless (very unpro i guess). But i connect external speakers to the recording laptop and check on results immediately (and keep an eye on the volume levels in Audacity).
I will print your instructions for microphone positioning and try to follow them exactly next time. But i wasn't much off anyway.
Thanks again!

PR Closed indicator

Hi Experts,
Can anyone help me on how to configure the PR closed Indicator to be auto once PR converted to PO?
I saw the help data like:
Purchase Requisition Closed
    Flags a purchase requisition as closed, that means that no further
    purchase orders are to be created for this purchase requisition.
Use
    You can:
    o   Set this indicator manually
        -   In change mode for a purchase requisition on the item detail
            screen
        -   When you create a purchase order with reference to a purchase
            requisition
    o   Have the system set the indicator when automatically creating
        purchase orders from purchase requisitions
        You can use the indicator Set reqs to "closed" to specify that the
        purchase requisition is considered closed once the associated
        purchase order has been created, even if the complete requisition
        quantity has not been ordered.
Regards,
Maia

Hi maia!
Setting 06 076 as error message is the correct solution.
for more detials check this thread.
restriction in PR to PO conversion
Regards,
Archit Gandhi

PO Closed Indicator table

Hi,
I have the table for EKBE in front to individual item in field ELIKZ,, X is there if the delevery is complteed for that item,   i want to know the table name and the field name to see teh PO which is complety closed at PO Level.
   regards,
    zafar

Hi
If you want to manually close the PO then activate the Delivery completed indicator and Final invoice indoicator.
If you want to extract the closed POs then you can use the report ME2L, ME2N etc with proper selection parameters and Dynamic selections.
If you want to extract the closed PO trhu table & field then Use EKPO-ELIKZ ( Del comp) & EKPO-EREKZ - Final Invoice
Hope it helps
Thanks/Karthik

Main Bank Account - Post Automatic Tick

Hi Gurus,
We are using manual bank statement and i have marked tick on post automatically in main bank account.
System is not allowing to post entries in FF67. Can you please help with this error?
Thank you

Hi,
Remove Post automatically tick mark in Main Bank account then its working.
Thanks
Muthu

PR To PO conversion via ME59, Closed Indicator

Hi,
We have set up ME59 to create POs from PR.
1.The 'Closed' indicator (in Quantities/Dates tab of PR) was not set. What to be done?
2. Main thing which is baffling is that in Production system, multiple POs continue to get created for a single PR.
Any thoughts on how to have the indicator set up to closed in PR?
and How to avoid the multiple PO issue?
fyi..
while running ME59, I have set 'Set Requisitions to "Closed"' to '1'.
Regards

Thanks Pavan/Charlie,
I had already done the setting of 06 76.(Could not actually simulate and verify, as in the dev. duplicate POs were never created.)
Before I move that to Production, also wanted to know about the 'CLOSED' indicator.
Pavan,
You are right when POs are created manually (ME21N). Closed indicator does not stop it. However it restricts the PO creation when set in background (ME59 variant set to run in background.)
Charlie,
The issue with 2(Always) would be that even for Partial PR conversion to PO, then the PR may be prematurely closed.
A.) What would be your suggestion to take care of the 'CLOSED' issue?
B.) If 06/76 set up for error, then can the setting 06/608,06/648 be avoided?
Regards,
Sameer

RE: During MIRO payment block indicator piks up automatically

Hi All,
Can anyone tell me about this issue:
My user is doing MIRO at that time Payment block indicator picks up automatically for some invoices randomly what could be the reason.
1) there is price differences MIGO and MIRO the same
Pleas let me know the possible reasons to check in my case.
points will be assigned.

Hi,
When you enter an invoice, the system suggests the values that it expects an invoice to contain as a result of the purchase order or goods receipt. If the invoice item differs from the default values, you must determine the reason for the variance by contacting the purchasing or goods receiving department or the vendor.
If a tolerance limit is exceeded, you receive a system message. You can post the invoice in the system, but it is automatically blocked for payment if an upper tolerance limit is exceeded.
An invoice can be blocked for payment due to one of the following reasons:
u2022     Variance in an Invoice Item
u2022     Amount of an Invoice Item
u2022     Stochastic Block
u2022     Manual Block
When an invoice is blocked, Vendor cannot be paid. Invoices can be blocked either automatically or manually. You can block an item by selecting the Ma (manual blocking reason) field in the item list.
When you post an invoice, two things happen:
u2022     The account postings resulting from the invoice are made.
u2022     In the vendor line of the accounting document, the system enters an u201CRu201D in the field Payment block so that Financial Accounting cannot make payment for the invoice.
I hope this will solve your doubt.
Regards,
Kapil

Can I make it so Firefox remembers the websites from when I closed the app and automatically open them like in other browsers.

Can I make it so Firefox remembers the websites from when I closed the app and automatically open them like in other browsers.

You may need to update your Firefox to get these features. It was introduced somewhat recently.
https://play.google.com/store/apps/details?id=org.mozilla.firefox

I remember once i added a addon which continues a web page of a forum if it has 10 pages automatically with out clicking it but now i cant find it?

i remember once i added a addon which continues a web page of a forum if it has 10 pages automatically with out clicking it but now i cant find it?

Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
Not much you can do, but try this anyway...
PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.

PR03- Trip Advances- Remove Automatic Tick in Cash

In transaction code PR03- Trip Advances, when I make an entry in an existing trip by going to change mode, the "Cash" check box gets defaulted automatically with a tick.
If not required, I have to remove it manually.
How can I remove this automatic tick mark in Cash?

Hello,
This is a standard behaviour for Advance in transaction PR03. The field "cash" is always defaulted. Please see F1 help further.
This is also hard coded:
Include: MP56TF50
Begin of QHKK012709 Don't set KASSA to X in PR03 if field is hidden
        select * from t706z1 where prog = sy-cprog
                             and   morei = wa_head-morei
                             and   schem = wa_head-schem
                             and   dynnr = sy-dynnr
                             and   fname = 'PTK08-KASSA'
                           and   tripf = tripf
                             and   rdynnr = 'PR03'.
        endselect.
        if not t706z1-auswl eq '-'.
       vsch-kassa = 'X'.
          vsch-kassa = 'X'. <<<<----
        endif.
Regards,
Raynard

Closed Indicator in PR automatically Tick by click on Delivery Comp. in PO

Similar Messages

Maybe you are looking for