Closed lid, connected to external monitor with no image...

So I followed the directions on Apple support regarding setting up a Macbook Pro (Early 2008) to an external monitor. I'm using a Gateway FPD2275w (if that helps) connected to the DVI-VGA adapter, or whatever Apple calls it. I'm using a Bluetooth mouse and keyboard and have set the option to wake the Mac from sleep with them. I've set the display to mirror, though it doesn't seem to matter what I set that option to. WHen I close the lid the Mac goes to sleep and the external display goes to sleep as well, but when typing on the keyboard it shows on the screen, when I open it up again. Any thoughts?

You must also have an external USB or BlueTooth keyboard connected, not just a display. Alternatively, you can try the third-party utility InsomniaX - VersionTracker or MacUpdate.

Similar Messages

  • Connect 2 externa monitors with different resolutions?

    Is it possible to oonnect 2 external monitors, with different resolutions to a mbp pro?
    I've read some about the "matrox solution", but that one requires that the monitors uses the same resolution.
    And, just to be clear, I don't want to just duplicate the screens, one should be primary.

    You may want to phone OWC and ask whether what you want to do is possible if one monitor is connected to the mini-Displayport and the other is connected to a USB port using this adapter:
    http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
    Note that the OWC adapter, like most USB video adapters I've seen advertised, is limited to a maximum resolution of 1600 x 1200, so you won't want to use it with a monitor whose native resolution is higher than that.
    Message was edited by: eww

  • MacBook Pro keeps going to sleep in closed-lid mode and external monitor

    I am trying to run the MacBook in closed lid mode with an external monitor. It seems to work fine at first, but after about 10 seconds, it goes to sleep. I can wake it back up but it just goes to sleep again.
    Has anyone seen this before?

    I figured it out. Apparently you can't run in closed-lid mode on battery. I plugged in the power adapter and it's working fine now.

  • How do I connect 2 external monitors with full HD to my MacBook Pro?

    I would like to connect up my 2 external monitors to my MacBook Pro.  But I want to have full HD resolution.  I want to have the desktop stretched so I don't want mirror displays.  What is the best way to accomplish this?  Is there an adapter that I should use?

    Thanks for the reply. Haven't gotten anything as yet. Just that I burned out my older PowerBook using it as a primary screen w/ a secondary 20" monitor. Would be nice if the MacBooks could be used as a CPU only, connect 2 different monitors, and use the LCD screen when portability is needed. But I suppose that is why Apple makes different types of computers. I know I can rig the video SCSI cable to bypass to LCD screen and use the other built-in monitor. But there goes the warentee and any kind of AppleCare... not that I have ever used it, (until a day after it has expired!)
    But thanks for the feedback. Your reply is what I expected. Being that I am a mercenary graphic designer and need to be able to work whenever, and where-ever I need to, the MacPro is not my hardware of choice. As well, I don't have $4000 in my budget. But man do those machines rock! Just think of what NASA could have done with one of those in 1969 when we were going to the moon! But now that the U.S. has decided that manned space travel and even scientific space exploration is not worthy of having a budget, the MacPros are religated to creating new episodes of Jersey Shores!
    Thanks again for your feedback!

  • With MacBooks Retina 13" can you connect two external monitors with resolution each 2560x1600?

    I'm not talking about Thunderbolt displays, but other brands like ASUS, LG, SAMSUNG, etc.
    Has anyone tested?

    You can connect two displays to the two Thunderbolt ports with appropriate Mini DisplayPort cables or adapters.
    <http://www.apple.com/macbook-pro/specs-retina/>
    "Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays"
    If the display supports HDMI, you could connect one to the computer's HDMI port, but not at 60Hz.
    "Support for 3840-by-2160 resolution at 30Hz"

  • Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
    BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

  • Can macbookpro be used with the lid closed while using multiple external monitors

    I want to use macbook pro with external monitors and be able to close the lid on the laptop, but can't figure out how to make that works with multiple monitors.  I currently use two external monitors with the laptop monitor as my third.  All are independent monitors and I accomplish this using the matrox diamond bvu-195 product (one for each external monitor).  Now I would like to add a third external monitor and be able to close the laptop lid - kind of like you would do with a docking station for a Windows laptop.  Anyone have any suggestions as to how to accomplish this?

    Connecting your present two external displays via USB has left your MBP's Mini-DisplayPort available for a third. Depending on the monitor's available inputs, buy a mini-Displayport-to-VGA, MDP-to-DVI, or MDP-to-HDMI adapter and the appropriate cable to make the connection. I would expect that adding a third monitor to your GPU's workload might cause your already slow USB-connected monitors to slow down farther, but you'll have to see whether that's true and, if so, how tolerable it is in your work.
    As for what will happen when you close the built-in display, I suspect that what happens if you do that now will continue to happen if you do it with a third monitor connected. If you can now close the display and run the machine in closed-clamshell mode, I expect you'll still be able to do so after adding the third external screen.

  • How to run an external monitor with lid closed

    how to use an external monitor with the "lid" closed

    You can use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

  • I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

    I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!  Further info:  I am a complete newbie to Mac.  Had three macs prior to 2000 then four PCs.  Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back)  with the F4 function key.  While I can get the background image from my MBA to display, that's it.  Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on.  So Idragged it over to display in the centre.  But that's all that's there.  And now I have gone out of those web pages but they are still displaying on the monitor.  There is some wierd disconnect.  I'm sure it is just a setting thing.  Will keep searching for answer but any advice welcome!

    Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
    Let me know if this worked for you.

  • Monitor Keep Flashing after connecting External Monitor with HDMI to VGA Adapter

    Dear Support,
    Here the case that i have connecting an External Monitor by HDMI to VGA Adapter.Once it connected, the monitor (Macbook) with keep flashing and no signal on the external monitor. Please help.

    Hi there BrianYip,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • Using an external monitor with the computer closed and using a bluetooth ke

    Can you use a bluetooth keyboard and mouse with the computer closed and using an external monitor?

    Yea i do this all the time on my big screen I just go in to system preferences and bluetooth and tell it to allow devices to wake the computer and then close the desplay then wake it with mouse or keyboard.

  • Can I use any external monitor with HDMI connection

    Am I able to connect any external monitor from Dell or Samsung to my Mac Book Pro w/ Retina display (late 2013) via an HDMI connection ?

    Yes

  • External monitor with MacBook Pro

    I have a new Macbook Pro and have it hooked up to an external monitor and an USB Apple keyboard in my home office. How am I able to power the laptop on without opening the display and have it display only on my external display? When I am at home I'd like to use my external monitor and not my Macbook display.

    Having the computer with the lid closed is dangerous cause even when just browsing the web with flash content it starts heating up and I've heard about casess of melted displays. Besides, the wifi strength is reduced and you can't use the keyboard and the trackpad.
    So, for Lion users, it's possible to just use the external display with the lid open:
    1. In Mission Control Preferences activate one Hot Corner to put the display to sleep.
    2. Connect the external monitor and plug in the power source to your computer.
    3. Move the mouse to the Hot Corner to put the display to sleep.
    4. Close the lid and wait a few seconds.
    5. Open the lid and voila!
    Take care!

Maybe you are looking for

  • Not receiving some texts from a ported google voice #

    my google voice # was ported over to my droid x2 phone and i am recieving calls just fine but i am not getting any type of text messages from friends. where are they going and how do i get them to come over to me?

  • User to enter values and stored as array

    Hi, I have some problem with my labs that I would like to clear by doubt. I need a user to keyed in a list of age so to calculate the average age. The values entered is stored in into an Array (not arrayList) I have been using ArrayList rather than a

  • Template link to css styles lost

    Hi, why, when I create a new page based a template, does the link to the css style sheet become broken? I can see in the code of the new page that ".."  is missing from the "../" in the url to the style sheets – but the template has the correct links

  • Problems converting screen recording for DVD

    I have made a screen recording using Quicktime and also Camtasia for Mac. I am recording live currency charts and want to use this in a DVD but I can not find the proper combination of recording and exporting. I can export a good copy that when watch

  • IPhoto 08 and myspace

    any thoughts on why i can upload pictures from iPhoto 08 to myspace? when i hit the browse button and click the select button on the picture i have chosen, nothing happens. what's up with that?