Closed Lid == Laptop Frozen

Hello:
Everytime I close the lid on my laptop the screen goes back, the mouse either disappears or freezes and I have to press the power button to restart it or turn it off. This happen even if xorg is not running or if I close it a little bit before the shutdown process finishes.
Any ideas on how to fix/debug?
Laptop: Dell Latitude x300
Kernel: 2.6.32-ARCH
MODULES=(!b43legacy b43 fuse acpi-cpufreq cpufreq_ondemand)
DAEMONS=(syslog-ng netfs hal !network !networkmanager @crond @alsa @wicd)
Another quick question, I have 'cpufreq_ondemand' in my module array and this is my /etc/conf.d/cpufreq file:
#configuration for cpufreq control
# valid governors:
# ondemand, performance, powersave,
# conservative, userspace
governor="ondemand"
# limit frequency range (optional)
# valid suffixes: Hz, kHz (default), MHz, GHz, THz
#min_freq="2.25GHz"
#max_freq="3GHz"
# use freq to set up the exact cpu frequency using it with userspace governor
#freq=
Any ideas why I must write ' sudo cpufreq-set -g ondemand' to give the the govenor ondemand pecedance over the 'performance' one every time I start the laptop? Did I miss something in the configuration?
Relevant wiki url: http://wiki.archlinux.org/index.php/Cpufrequtils
Finally, any thing you guys would recommend to extend my battery life?
Relevant wiki url: http://wiki.archlinux.org/index.php/Lap … Management
What did you guys install and how is it working for you? ^

Jonathan , I am experiencing the same exact problems with my Macbook Pro 15 inch. I first started noticing about a month ago that the computer was getting unusually HOT to the touch , and after one day I set the lid down, when I tried to open it back up, it remained on , but no screen, and unresponsive. I have had to restart it everytime since then. It also now takes a lot longer than usual to reboot. I hope the people at Apple resolve this soon, because this is WAY too expensive to be having these problems on a new machine Ive only had for 5 months.

Similar Messages

Advice about using the laptop with closed lid while connected to external display

Hello all HP forum members!
I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the display in some way, as a result of the heat?
Thanks!

Hi @VVel ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
Control Panel - Power Options - upper left - Choose what closing the lid does.
Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problem running in closed-lid (clamshell) mode?

New 2.4 glassbook, upgraded to 4Gb Crucial ram, using bluetooth mouse and keyboard, with external Dell 2007FP monitor.
With my old MBP in sleep mode, I could connect the monitor, ethernet, and power, and when I plugged in usb with the lid still closed, the laptop would turn on and everything worked in lid-closed mode.
Now with new glassbook, do the same thing (using display port to DVI adapter), the machine whirrs up, the display turns on (without top menu), and then the laptop goes to sleep. Tried it on a different monitor, same problem.
Am I the only one with this problem of the glassbook not wanting to operate in lid-closed mode?
Thanks in advance.

Yes, same problem. Swapped memory chips back to Apple, same problem. Reset SMU and zapped pram, same problem. It's gonna suck if I have to exchange the laptop because I've spent a day migrating over. I'm hoping it's just a defective DP-DVI adapter. I've also noticed external display flashing (losing signal) as detailed in this thread: http://discussions.apple.com/thread.jspa?threadID=1756755&tstart=0 This makes me worry it's not just the adapter but a problem (driver or hardware) with the 9400M. Can someone else confirm they can operate in clamshell mode without problems?

15-r007TU-Display does not turn on when it automatically turns off after closing lid.

I just purchased hp 15-r007TU, Windows 8.1 x84. I'm facing a strange problem. After all initial setup, I put the laptop on to download and install all lates Windows 8.1 patches. The display is set to tuen off automaticaaly after 5 minutes. After 5 min it did turn off as set. But then I can not turn it back on. I pressed all (except power) keys, used touch pad, closed lid and opened but it stayed off. Laptop was on and running as I could see HDD lights flickering, I could hear system sounds on pressign mute/volume keys, also I could toggle WiFi with key. I then pressed power off key to turn Windows off normally. I did turn off. I again turned it on, I could see 'hp' logo with spinning wheel and then nothing. Display is off and I don't see start screen. I have to hard reset (press power button for more than 5 seconds) then display is normal. This happens every time the display turns itself off automatically after set time or I close the lid. Only after hard reset it works normally and I see the start menu.
The power settings I use are:
1. never put system to standby after preset time. (either on battery or AC power)
2. turn display off after 5 min. (both on battery or AC power)
3. when I close lid - do nothing. (both on battery or AC power)
4. when I press power button - shut down
I am using Windows 8.1 x64 with all latest patches installed. BIOS updated to lates available. All latest drivers installed.
I have not yet set password to the system to log in.
Help would be immensly appreciate. The device is still in warrenty if it needs to be replaced.

Hello K1200LT,
Welcome to the HP Forums!
I understand the computer will not sleep when you shut down the lid. You seem to have already done most of the troubleshooting I would've suggested.
To be honest, it is either a hardware or software-related issue. To determine this, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Closed Lid Mode in Boot Camp...

Hey guys.
Before I go and splurge on a 24" external display...will it be possible to use something like closed lid mode under boot camp?
Will also want to be able to use a bluetooth mouse and keyboard
cheers

Hi V.K., I followed the reset steps for PRAM and the problem still exist. Could this be the battery's problem? BTW, my laptop is still fairly new, got it in December.
Thanks for your help

MacBook Pro won't turn on after closing lid & fully charged. Help!

I have a MacBook Pro from June 2008, I have been using it all day, this evening it was fully charged and I left it on with the screen open - by the time I came back the screen was black ( I assumed it had gone to sleep) I closed the lid to take it upstairs to discover that when I opened it the power light was not on. When I press the power button nothing happens, but if I hold the power button for around 5 seconds the light stays on, the laptop sounds like it is trying to start up but then dies. I have tried the smc reset, but it has not worked. Also tried taking the battery out and trying this with just power adapter. Does anyone have any clues to what is wrong? Or do I just take it into the apple store?
Thanks, really could do with some help!!

Hey Pascale,
I am not sure if you have fixed this but I had the same problem and found some advice from another website...
http://www.adeepbite.com/lion-seems-having-insomnia-it-doesnt-sleep-easily/
All I had to do was turn off my "internet sharing" (System preferences -> Sharing -> Internet Sharing (uncheck) )
and presto, no more closing lid problems.
If your internet sharing wasn't the issue then I don' t know what is.
Cheers

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?

Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!!

ACPI doesn't detect closed lid until other acpi event

Basically I have the same problem as described in this thread:
https://bbs.archlinux.org/viewtopic.php?id=121224
No solution is posted so I bring this up again.
As said when I close the lid, acpi doesn't detect it not in the acpi.log neither with acpi_listen. When I insert the battery, acpi immediately detects the closed lid and my laptop goes in suspend as it's supposed to.
This happens with a WM + acpi + laptop-mode-tools, in Xfce and in Gnome. KDE however works fine.
The logs when I close the lid and then insert the battery:
acpi.log
Jan 21 20:51:31 localhost acpid: client 1254[0:1000] has disconnected
Jan 21 20:51:31 localhost acpid: client connected from 1254[0:1000]
Jan 21 20:51:31 localhost acpid: 1 client rule loaded

I can tell with the lid closed because of which lights are on.
Anyway, I don't see anything interesting at all in the logs. This is so weird.
EDIT: I'm thinking that it might be conflicting kernel modules. For example I have phc-intel and acpi-cpufreq. Plus I'm using the CK kernel. So when I get home today, I'll first try removing phc-intel, then acpi-cpufreq, then I'll try stock kernel.
Last edited by pogeymanz (2011-06-22 17:32:56)

T61 Opening/Closing Lid Changes Display on Windows 7

Hello!
I have T61 laptop running Win 7 which I have installed the Latest BIOS (version 2.27) & Display Drivers (Nvidia) and the external LCD-monitor to the analog VGA-port. I make to FN+F7 "projector only" for view to the external LCD-monitor. But when i close and re-open the lid the automatically changes on the laptop display ("computer only" to FN+F7 menu). It's not handy very.
I found this topic
http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61-Opening-Closing-Lid-Changes-Display-...
but when my laptop running Win XP i have not this problem.
I found
"Fixed an issue where the external display might have blank screen after closing the lid "When I close the lid: Do nothing" was selected in Power Options on Windows Vista."
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68451
but i have BIOS 2.27 and don't help.
Any ideas?
Thanks!

Try the Vista driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67231
After the download, you might have to go into C>Drivers>Win>Display and run the setup file from there.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Allowing Mac to continue working with closed lid?

Is there any way to allow Mac to continue working and doing whatever it's been doing with a closed lid? I tried Caffeine and NoSleep but no luck and whenever I close the lid, it goes to power saving mode, disconnects me from WiFi and stops the HDMI output. As a consequence, whenever I want to download a bigger file or watch something on my TV via HDMI, the laptop has to remain ever so slightly open. Any way to fix it, be it through 3rd party apps or some terminal mumbo-jumbo?

Try this:
http://support.apple.com/kb/HT3131

DVI to VGA Adapter Closed Lid Mode Distorted Picture on TV

Hi
I managed to hook up the DVI to VGA adapter and view on my Sanyo TV. Nothing fancy just a older TV.
I am feeding through the Yellow Video output into the video input on the TV. (Also tried s-video)
Viewing with the macbook lid open no problems. Remembered that I could close the lid.
Followed the instructions online about connecting, closing the lid and waking up using my bluetooth mouse.
First time things went well - able to use Front Row and View Slideshows etc. also steaming video from Safari, (TV Land for my kid)
Then the screen began to flash - and change to black with rolling images.
Like you used to have in the 60-70's black and white TV - multiple images rolling past over and over.
I tried rebooting - starting new connections, using different cables, using both VGA and S-Video directly into the TV and not through my reciever.
Any ideas!
I can't use closed lid mode at all. I must instead, dim my screen.
Help?
Thanks
Buddy

Thanks, BSteely, I have the latest QT and iTunes already. Closing the lid seems to kick the MacBook external display into some special mode that Front Row can't display videos in. For example, you get the Front Row interface, but as you select movies/TV shows, the preview window on the left side is blank. Open the cover, and have both displays going, and you can see the previews fine (and of course, you can see the movies/TV shows play fine as well when you click on them)
Running Quicktime Player full screen works fine without Front Row in either open or closed lid mode. So it is apparently something wrong with Front Row itself.

I connected my iphone 4s that i unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. it told me it needed 8 hours. i closed my laptop. not shut down. i opened and it wants restorin?

I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).

Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.

TV + Closed-Lid Mode?

Is running in closed-lid mode on the MacBook using a television with the Apple Video Adapter supported? I can't get it to work properly.
Brian

Make sure your power saving settings aren't unusual - I find normal works fine. Configure your external displays with the lid open and then with the power cable connected try closing the lid. It will fall asleep immediately - let it. Then when the light throbs try waking it back up again with the remote... It works for me, but it did try my patience before I came up with a routine that I was happy with.
Also - how do you connect your TV? My TV has a monitor / DVI out and it's quite happy with that. I shouldn't think that S-Video should be too different. Has anyone tried with S-Video? Hope this helps...
macbook 2.0Ghz Mac OS X (10.4.8) 2 Gb RAM

10.5.2 wake/sleep and closed-lid problems

As of 10.5.2 my MBP no longer works correctly in closed lid mode using a hardware
setup that previously worked flawlessly. After plugging in power and video, plugging
in the USB keyboard seems to wake the system, but no video. I then must open the
lid, unplug the USB and video and try to get the system to respond. I often must cycle
the power to reset the system--very disturbing to do that.
Also as of 10.5.2, I have had to power-cycle the machine when it has refused to wake
in open-lid mode and this weekend I the entire machine froze (no mouse movement,
no expose, etc) in the middle of work using a graphics-intensive program and I had
to reboot by cycling the power.
A friend also reported similar issue in which the system would not respond after the
screensaver became active.
Are others seeing problems like these? I am beginning to suspect that the post-10.5.2
graphics update has problems.

I just wiped my HD and reinstalled everything besides the Graphics Update. I can now close the lid of my MBP and use my external monitor alone. The Graphics Update had made that impossible.
Further, I am in the habit of putting my MCP to sleep and putting it in a backpack in the morning, meeting friends for breakfast, and re-awakening it at the office. When I did get to my office, I found (as another user had on another thread) that the MBP, even closed, had woken itself up and was hot as heck. I am uncertain that sleep will work properly under 10.5.2, but I know that the display wackiness of the Graphics Update was driving me nuts. I will not install it until Apple fixes it.
I looked around for awhile for a way to uninstall the Graphics Update, but could not find it...I suspect it exists somewhere.
The 10.5.2 Combo update (343MB download) DOES NOT include the Graphics Update, and at this time, I seem quite ok with everything else updated.

Closed Lid Operations Wont Work

I am a big fan of the closed lid with external mouse, keyboard, and display (minimize spill risks in college dorm room). I just got a new macbook pro after 4 great years with my g4 powerbook and I cannot get the new machine to work with the lid closed. I have tried working with both displays then closing it, but it won't wake up. I tried putting it to sleep and attaching the external display but it doesn't wake up. The for either if I try to open the machine to use it normally the built in display, keyboard, and trackpad are non-responsive and so are all my external items. Has anyone else had this problem or any ideas on what could be going on.

Jonathan , I am experiencing the same exact problems with my Macbook Pro 15 inch. I first started noticing about a month ago that the computer was getting unusually HOT to the touch , and after one day I set the lid down, when I tried to open it back up, it remained on , but no screen, and unresponsive. I have had to restart it everytime since then. It also now takes a lot longer than usual to reboot. I hope the people at Apple resolve this soon, because this is WAY too expensive to be having these problems on a new machine Ive only had for 5 months.

Closed Lid == Laptop Frozen

Similar Messages

Maybe you are looking for