Closed/Wait status for WebLogic v. 3.0.4

Hello,
Has anyone ever heard of an issue with WebLogic ver 3.0.4 having a
threshold for the number of transactions that can remain in a Closed/Wait
status, before causing the application instance to hang up? If so, please
provide any information you have.
Thank you,
Greg Kupetz

First of all, when you publish to a folder, iWeb's job is done.
Now it's your responsibilty to upload the files and folders.
Hint : feed.xml

Similar Messages

  • Spool  was in waiting status for 10 mins

    Hi all,
    when i try to issue any print from sap , Spool  was in waiting status for more than 5 mins & then it starts begins formatting output type ...
    Please help me .
    Regs ,
    Murthy

    hi,
    If you are having frequent problems with delayed processing of spool requests and/or spool work processes waiting for communications time-outs, then you may want to run your spool work processes with the R/3 developer trace switched on.
    Activate the developer trace by setting the option rdisp/TRACE in the system profile or by adding the TRACE option to the command line with which an SAP application server is started. These command lines are defined in the SAP start profiles. For more details about this, see Trace Functions and the sections about profile maintenance in the documentation about the Computing Center Management System.
    The information in the developer traces is highly technical. However, the trace information should let you or a consultant at least identify the host system and printer that are causing problems.

  • Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

    Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

    If the downloads are stalled or "waiting" - try these suggestions.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • Checking Status for Weblogic 10.3

    Can anyone suggest me how to check the status of wls 10.3 without using ps-ef or WLST or weblogic.Admin, do we have any other flags or methods were the status could be returned as RUNNING or ADMIN

    Hi Eden,
    If you dont want to use WLST, weblogic.Admin or "ps -ef" tools to get the Server State then you can try using MBeans (JMX coding) to get the Server State..like: http://weblogic-wonders.com/weblogic/2010/06/22/getting-all-server-state-info-in-9-x-jmx-style/
    Thanks
    Jay SenSharma

  • YouTube "Share" on Perpetual "Waiting" status for Final Cut Pro X

    Until recently, I was able to export direct from Final Cut Pro X to YouTube.  Now I'm getting a "Waiting" message that never resolves.  I’ve tried waiting more than an hour - and this is for just a 90-second video!  I've seen some talk about this same problem from others on the internet.  Did something change recently with YouTube that affects my ability to ‘share’ directly from Finale Cut?  What’s the best solution or work-around?
    Here's what I'm seeing:
    Thanks in advance!
    DHC

    Thanks - but when I try that I get an error message telling me to go buy compressor from the Apple Store.
    Please note that up until a week or so ago, I was able to "share" easily from Final Cut Pro X directly into YouTube.  All I want to do is what I was able to do then, and which suddenly seems to not work. 

  • How to re-start the workflow for Shopping carts in WAITING status

    Hi
    We are using 1-step approval work flow, and we get some strange issue. We can add approver in the workflow, but after we click order button and back to check status again, sometimes there will be "Ad-hoc agent not found" issue. Do you know how to solve?
    And one workaround for user is to re-add the approval, and sometimes the shopping cart back to normal. But sometimes, after we add the approver, the shopping cart are in waiting status:
    Workflow Item:
    Workitem-ID 000000714642
    Task WS10000276
    Text One-Step Approval: Value limit: Shopping Cart
    1000114698
    Status WAITING
    Statustext Waiting
    Date 13.06.2008
    Time 10:41:22
    So may I ask how to re-trigger the workflow?

    Hi,
    Thx for that. I need to trigger the Approval workflow to go the the approval manager.
    Can u give me the document on this? thx,  kerry.liu [at] ap.effem.com.
    Thx very much
    Kerry

  • HT1688 I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

    I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

    Hello Jose,
    I would be concerned too if the audiobook I purchased from iTunes was not downloading on my iPhone. I have a few suggestions to get it downloaded to your iPhone.
    First, I recommend checking to see if the download was interrupted:
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    If the audiobook still does not download, I recommend signing out and back into the iTunes Store on your iPhone:
    Changing your Apple ID account
    Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
    Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
    The last step states to sign in with another account, but for the situation you described, I recommend just signing in with your same Apple ID.
    You can find the full article here:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    If you are still not able to download the audiobook, you can report an issue with this purchase using the steps in this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Best,
    Sheila M.

  • What does the option 'Settings- incorrect waiting time for status' do ?

    Hi All
    We had an infopackage that seemed to be hanging this morning . (Yellow Status) I was advised to access the option 'Settings->incorrect waiting time for status' and set the wait time to 7 minutes (from 7 hours). This changed the status to Red.
    I then re-ran the ipak and reset the ''Settings->incorrect waiting time for status'  to 7 hours. This made the red process go back to yellow and the run time started going up again.
    Can someone explain what is going on. Have I got 2 instances of the same ipak running simulateously. Why did the red one come back to life even thoug I deleted the request in data target for that ipak.
    Thanx
    HKF

    Thanks, Verdi - the first time I enabled,/ or disabled, I hadn't realised what had actually changed, as I think I'm so used to seeing my links open in Safari anyway!

  • How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

    Hi,
    I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
    Thanks,
    Sagar Pawar.

    Hi Sagar Pawar ,
    First you need to set the email notification :
    Kindly review :
    12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
    Manage Events / Incidents / Problems (Doc ID 1368036.1)
    12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
    Regards
    Ansari

  • Additionall status for closed document if it was printed

    It would be great to have additional Status for closed document if it was printed e.g. Closed - Printed. The same way as it is when a document is opened and printed (Open - Printed). Now if the document is paid user doesn't know at the first look if it has been printed or not. User has to look at the print preview to recognize this.

    Try moving the Catalog to a different location, preferably to the location that you normally keep it in.  Then double click on it and it should open.
    It is important to keep several backups of your catalog, and your images.

  • Setup issues: Apache plugin for Weblogic

    Hi,
    I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
    Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
    I'm using Weblogic 8.1 SP2, single server.
    Please find below the messages appear in browser, plugin logs, and apache version.
    Thanks in advance for your help.
    ======================Browser Error Message================
    JSP Processing Error
    HTTP Error Code: 404
    Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
    Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246)     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228)     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841)     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)     at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021)     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
    ======================Browser Error Message End================
    ==========Apache version============
    Please find apache version and plugin logs below:
    # ./apachectl -v
    Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
    Server built: Nov 4 2004 09:58:18
    ==========Apache version End============
    =================Plugin Logs================
    ================New Request: [GET /AppConsole/ HTTP/1.1] =================
    Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
    Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
    Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
    Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
    Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
    Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
    Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
    Mon Jun 12 08:20:14 2006 INFO: sysSend 639
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Mon Jun 12 08:20:14 2006 parsed all headers OK
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
    Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
    Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
    =================Plugin Logs End================

    Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
    I see 500 error in the apache access log file.
    I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
    Please find below httpd.conf file content.
    ==============httpd.conf===============
    ServerName eus0000168.eu.verio.net
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
    # server as "/opt/IBMIHS/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/opt/IBMIHS"
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #LockFile logs/accept.lock
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 10
    ## Server-Pool Size Regulation (MPM specific)
    # worker MPM
    # ThreadLimit: maximum setting of ThreadsPerChild
    # ServerLimit: maximum setting of StartServers
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule worker.c>
    #StartServers 5
    StartServers 1
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadsPerChild 25
    MaxRequestsPerChild 1000
    </IfModule>
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    # Change this to "Listen 0.0.0.0:port" to restrict the server to
    # IPv4.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule access_module modules/mod_access.so
    LoadModule auth_module modules/mod_auth.so
    #LoadModule auth_anon_module modules/mod_auth_anon.so
    LoadModule auth_dbm_module modules/mod_auth_dbm.so
    LoadModule include_module modules/mod_include.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    LoadModule cgid_module modules/mod_cgid.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imap_module modules/mod_imap.so
    LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #LoadModule deflate_module modules/mod_deflate.so
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #LoadModule status_module modules/mod_status.so
    <IfModule mod_status.c>
    ExtendedStatus On
    </IfModule>
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group #-1 on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If this is not set to valid DNS name for your host, server-generated
    # redirections will not work. See also the UseCanonicalName directive.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address anyway, and this will make
    # redirections work in a sensible way.
    #ServerName new.host.name:80
    # UseCanonicalName: Determines how Apache constructs self-referencing
    # URLs and the SERVER_NAME and SERVER_PORT variables.
    # When set "Off", Apache will use the Hostname and Port supplied
    # by the client. When set "On", Apache will use the value of the
    # ServerName directive.
    UseCanonicalName Off
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #DocumentRoot "/opt/IBMIHS/htdocs/en_US"
    #DocumentRoot "/www/a"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/opt/IBMIHS/htdocs/en_US">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    UserDir public_html
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit Indexes
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # The index.html.var file (a type-map) is used to deliver content-
    # negotiated documents. The MultiViews Option can be used for the
    # same purpose, but it is much slower.
    DirectoryIndex index.html index.html.var
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives. See also the AllowOverride
    # directive.
    AccessFileName .htaccess
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    TypesConfig conf/mime.types
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # EnableMMAP: Control whether memory-mapping is used to deliver
    # files (assuming that the underlying OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. On some systems, turning it off (regardless of
    # filesystem) can improve performance; for details, please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
    # EnableMMAP off
    # EnableSendfile: Control whether the sendfile kernel support is
    # used to deliver files (assuming that the OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
    EnableSendfile off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog logs/error_log
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel debug
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog logs/access_log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer_log referer
    #CustomLog logs/agent_log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access_log combined
    # ServerTokens
    # This directive configures what you return as the Server HTTP response
    # Header. The default is 'Full' which sends information about the OS-Type
    # and compiled in modules.
    # Set to one of: Full | OS | Minor | Minimal | Major | Prod
    # where Full conveys the most information, and Prod the least.
    ServerTokens Prod
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (internal error documents, FTP directory
    # listings, mod_status and mod_info output etc., but not CGI generated
    # documents or custom error documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature Off
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings. If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "/opt/IBMIHS/icons/"
    <Directory "/opt/IBMIHS/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
    <IfModule mod_cgid.c>
    # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
    # for setting UNIX socket for communicating with cgid.
    #Scriptsock logs/cgisock
    </IfModule>
    # "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/opt/IBMIHS/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Directives controlling the display of server-generated directory listings.
    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    IndexOptions FancyIndexing VersionSort
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    AddType application/x-tar .tgz
    AddType image/x-icon .ico
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis
    # For server-parsed imagemap files:
    #AddHandler imap-file map
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    # to be distributed in multiple languages.)
    AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # Putting this all together, we can internationalize error responses.
    # We use Alias to redirect any /error/HTTP_<error>.html.var response to
    # our collection of by-error message multi-language collections. We use
    # includes to substitute the appropriate text.
    # You can modify the messages' appearance without changing any of the
    # default HTTP_<error>.html.var files by adding the line:
    # Alias /error/include/ "/your/include/path/"
    # which allows you to create your own set of files by starting with the
    # /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
    # even on a per-VirtualHost basis. The default include files will display
    # your Apache version number and your ServerAdmin email address regardless
    # of the setting of ServerSignature.
    # The internationalized error documents require mod_alias, mod_include
    # and mod_negotiation. To activate them, uncomment the following 30 lines.
    # Alias /error/ "/opt/IBMIHS/error/"
    # <Directory "/opt/IBMIHS/error">
    # AllowOverride None
    # Options IncludesNoExec
    # AddOutputFilter Includes html
    # AddHandler type-map var
    # Order allow,deny
    # Allow from all
    # LanguagePriority en de es fr it nl sv
    # ForceLanguagePriority Prefer Fallback
    # </Directory>
    # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    # ErrorDocument 410 /error/HTTP_GONE.html.var
    # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash. This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
    BrowserMatch "^gnome-vfs" redirect-carefully
    # Allow server status reports generated by mod_status,
    # with the URL of http://servername/server-status
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    #Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
    #all you require is reverse proxy.
    #ProxyRequests On
    #<Proxy *>
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Proxy>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #ProxyVia On
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    NameVirtualHost 83.231.147.65:80
    <VirtualHost 83.231.147.65:80>
    ServerName eus0000168
    DocumentRoot "/www/a/global/nissan-europe"
    RewriteEngine on
    RewriteLogLevel 0
    RewriteOptions inherit
    #--RAM----
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo On
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    #WebLogicHost eus0000160
    #WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
    WebLogicPort 27110
    </IfModule>
    DynamicServerList OFF
         <Location /AppConsole>
         SetHandler weblogic-handler
         </Location>
    <Location /console>
    SetHandler weblogic-handler
    </Location>
    <Location /HTTPClnt>
    SetHandler weblogic-handler
    </Location>
    <Location /iiop>
    SetHandler weblogic-handler
    </Location>
    #------RAM------
    Alias /data "/www/a/data"
    Alias /at "/www/a/at"
    Alias /ch "/www/a/ch"
    Alias /ch_fr "/www/a/ch/ch_FR"
    Alias /ch_de "/www/a/ch/ch_DE"
    Alias /de "/www/a/de"
    Alias /es "/www/a/es"
    Alias /fr "/www/a/fr"
    Alias /it "/www/a/it"
    Alias /nl "/www/a/nl"
    Alias /se "/www/a/se"
    Alias /tr "/www/a/tr"
    Alias /uk "/www/a/uk"
    Alias /cz "/www/a/cz"
    Alias /hu "/www/a/hu"
    Alias /sk "/www/a/sk"
    Alias /global "/www/a/global"
    Alias /dk "/www/a/dk"
    Alias /fi "/www/a/fi"
    Alias /no "/www/a/no"
    Alias /pl "/www/a/pl"
    Alias /pt "/www/a/pt"
    ErrorDocument 404 /error404.html
    ErrorDocument 500 /error.html
    </VirtualHost>
    Include conf/virtual-hosts/
    CoreDumpDirectory /logs/apache2
    LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
    WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo ON
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    WebLogicPort 27110
    </IfModule>
    CoreDumpDirectory /logs/apache2
    D

  • BPM for Weblogic configuration is failed

    1, I install BPM for Weblogic.
    2, I create a domain for weblogic using config tool and start it.
    3, I create a new directory.
    However, the configuration is failed.
    The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
    The log is as follows:
    For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
    changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
    The edit lock associated with this edit session is released
    once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
    Exiting WebLogic Scripting Tool.
    <Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
    Do you want to cancel this wizard?

    Hi,
    Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
    -------------------log message-------------------------------
    TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
    TO_MSG
    TO_MSG Your environment has been set.
    TO_MSG
    TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
    TO_MSG
    TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
    TO_MSG
    TO_MSG Welcome to WebLogic Server Administration Scripting Shell
    TO_MSG
    TO_MSG Type help() for help on available commands
    TO_MSG
    TO_MSG Starting server BPMServer
    TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
    TO_MSG Starting weblogic server ...
    TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ26￥ﾈﾆ58￧ﾧﾒ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
    TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ12￧ﾧﾒ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ13￧ﾧﾒ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ16￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
    TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ24￧ﾧﾒ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    TO_MSG Server started successfully.
    TO_MSG Started Server. Trying to connect to the server ...
    TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
    TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
    TO_MSG
    TO_MSG Warning: An insecure protocol was used to connect to the
    TO_MSG server. To ensure on-the-wire security, the SSL port or
    TO_MSG Admin port should be used instead.
    TO_MSG
    TO_MSG Location changed to edit tree. This is a writable tree with
    TO_MSG DomainMBean as the root. To make changes you will need to start
    TO_MSG an edit session via startEdit().
    TO_MSG
    TO_MSG For more help, use help(edit)
    TO_MSG
    TO_MSG Starting an edit session ...
    TO_MSG Started edit session, please be sure to save and activate your
    TO_MSG changes once you are done.
    TO_MSG creating mbean of type JMSServer ...
    TO_MSG creating mbean of type JMSSystemResource ...
    TO_MSG creating mbean of type SubDeployment ...
    TO_MSG creating mbean of type Queue ...
    TO_MSG creating mbean of type Topic ...
    TO_MSG creating mbean of type ConnectionFactory ...
    TO_MSG creating mbean of type ConnectionFactory ...
    TO_MSG creating mbean of type Server ...
    TO_MSG creating mbean of type JDBCSystemResource ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type JDBCSystemResource ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Realm ...
    TO_MSG creating mbean of type RoleMapper ...
    TO_MSG creating mbean of type CredentialMapper ...
    TO_MSG creating mbean of type CertPathProvider ...
    TO_MSG creating mbean of type Authorizer ...
    TO_MSG creating mbean of type Adjudicator ...
    TO_MSG creating mbean of type AuthenticationProvider ...
    TO_MSG creating mbean of type AuthenticationProvider ...
    TO_MSG setting attributes for mbean type JMSServer
    TO_MSG setting attributes for mbean type JMSSystemResource
    TO_MSG setting attributes for mbean type SubDeployment
    TO_MSG setting attributes for mbean type Queue
    TO_MSG setting attributes for mbean type Topic
    TO_MSG setting attributes for mbean type JMSConnectionFactory
    TO_MSG setting attributes for mbean type JMSConnectionFactory
    TO_MSG setting attributes for mbean type Server
    TO_MSG setting attributes for mbean type JDBCSystemResource
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
    TO_MSG setting attributes for mbean type JDBCDriverParams
    TO_MSG setting attributes for mbean type JDBCDataSource
    TO_MSG setting attributes for mbean type DefaultIdentityAsserter
    TO_MSG setting attributes for mbean type SecurityConfiguration
    TO_MSG setting attributes for mbean type SecurityParams
    TO_MSG setting attributes for mbean type EmbeddedLDAP
    TO_MSG setting attributes for mbean type SecurityParams
    TO_MSG setting attributes for mbean type Domain
    TO_MSG setting attributes for mbean type JDBCDataSource
    TO_MSG setting attributes for mbean type JDBCXAParams
    TO_MSG setting attributes for mbean type JDBCDataSourceParams
    TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
    TO_MSG setting attributes for mbean type JDBCDriverParams
    TO_MSG setting attributes for mbean type JDBCDataSourceParams
    TO_MSG setting attributes for mbean type JDBCSystemResource
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG Saving all your changes ...
    TO_MSG Saved all your changes successfully.
    TO_MSG Your edit session is not stopped, you can continue your edits.
    TO_MSG Activating all your changes, this may take a while ...
    TO_MSG The edit lock associated with this edit session is released
    TO_MSG once the activation is completed.
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG
    TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
    TO_MSG that require server re-start:
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
    TO_MSG Attributes changed : ListenAddress
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
    TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG Activation completed
    TO_MSG Creating a user ...
    TO_MSG
    TO_MSG Created user successfully
    TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ01￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ08￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
    TO_MSG .................Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ29￥ﾈﾆ48￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ30￥ﾈﾆ45￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ00￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ31￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
    TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
    TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
    TO_MSG WLST-WLS-1249792014056:      at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
    TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.open(Native Method)
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:117)
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:133)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
    TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
    TO_MSG WLST-WLS-1249792014056: >
    TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.open(Native Method)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.Fil

  • Configuration is failed - BPM for Weblogic 10.3.1

    1, I install BPM for Weblogic.
    2, I create a domain for weblogic using config tool and start it.
    3, I create a new directory.
    However, the configuration is failed.
    The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
    The log is as follows:
    For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
    changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
    The edit lock associated with this edit session is released
    once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear], to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 [archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear], to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.      at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)      at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)      at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)      at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)      at java.lang.reflect.Method.invoke(Method.java:597)      at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)      at org.python.core.PyMethod.__call__(PyMethod.java:96)      at org.python.core.PyObject.__call__(PyObject.java:248)      at org.python.core.PyObject.invoke(PyObject.java:2016)      at org.python.pycode._pyx17.deploy$8(<iostream>:223)      at org.python.pycode._pyx17.call_function(<iostream>)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyTableCode.call(PyTableCode.java:404)      at org.python.core.PyFunction.__call__(PyFunction.java:184)      at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623)      at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyTableCode.call(PyTableCode.java:256)      at org.python.core.PyFunction.__call__(PyFunction.java:169)      at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738)      at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyCode.call(PyCode.java:14)      at org.python.core.Py.runCode(Py.java:1135)      at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)      at weblogic.management.scripting.WLST.main(WLST.java:129)      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)      at java.lang.reflect.Method.invoke(Method.java:597)      at weblogic.WLST.main(WLST.java:29)
    Exiting WebLogic Scripting Tool.
    <Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
    Do you want to cancel this wizard?

    Hi Ye,
    I noticed this afternoon that Oracle's refering to Oracle WebLogic 10.3.1 as "Oracle WebLogic 11g".
    Know this comes as no surprise to you, but when I tried to install Oracle BPM 10gR3 Enterprise on WebLogic 11g (WebLogic 10.3.1) this afternoon it failed. A friend pointed out to me that Oracle WebLogic 11g does not support the DataDirect JDBC driver. Since Oracle BPM Enterprise 10gR3 uses this driver to connect to both its Engine database and Directory Service databases, he's thinking this might be the cause of our problem.
    It would be worth verifying this with Support. Here's what I think they'll point you to. The Oracle BPM 10gR3 release notes(http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm#N65589) indicate that the only WebLogic application servers supported are Oracle WebLogic 10.3 (10gR3), Oracle WebLogic 10.0 MP1.
    Again, talk to Support, but I don't think there's a workaround. The only thing I think you can do is to uninstall WebLogic 10.3.1 and then install WebLogic 10.3 if you want to install Oracle BPM 10gR3 Enterprise on it.
    Dan

  • Work flow in waiting status

    Hi,
    we are using N step PO work flow for chagning the purchase orders.
    when the PO is changed and ordered workflow is going into WAITING status.
    It is not triggering the next steps at all.
    Could any one suggest how to proceed further?
    Thanks,
    Naresh

    Hi Daniel,
    It's wokring fine for all the PO'S.
    For only one specific PO we are facing this problem.
    Even If I try to change the same PO again it gives an error
    'Document being processed in background; try again later'
    Please suggest.
    Thanks,
    Naresh

  • How to increase the waiting time for response in Adapter Engine not in IE

    Hi Experts,
                It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired.  We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
    kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with  status flag Log version.
    Thanks & Regards,
    Srihari.

    Hi,
    Please see
    How To... Investigate Timeouts In Synchronous XI/PI Scenarios
    It will answer all your queries
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Maybe you are looking for

  • Does anyone know of an app that is for invoicing that can be accessed from more than one iPad at a time?

    I have a roofing business with my husband and we both have iPads we need a invoicing program app that we both can use and see the same material on both iPads is there any apps that anyone knows of that can do this?

  • Switch statement problem

    I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors

  • Typing special character

    How do you create special characters, for example the copyright symbol with the iPad's keyboard?

  • Employees who are 21 years of age or over AND work 35 hours or more a week

    Hi, I need to extract the employee details who are 21 years of age or over AND work 35 hours or more a week. Where can i find the weekly working hours?

  • Validation in lsmw

    hi all, plzz let me know how to perform these validations in LSMW: 1)EKORG     should be either of the two:     JP10/ICP5 in the txt file 2)NORMB     or LOHNB  Mandatory It has to be set either one of them.means any one of them must be present in inp