Closing a mass volume of PO
Dear All,
Any body so kind help me to solve following requirement of my client.
There are some 30000 list open po against a purchase organization. Client want to close the all the given list of PO.
It's very difficult to close(lock & delivery complied) each and every PO by using me22n.
Also we can use mass maintaince using MEMASSPO & delivery complited can be done using this T.Code. However blocking is not possible with this T Code.
Can any body give me some idea how can I proceed. Is there any other way by which I can close all the 30000 PO in a single run.
Regards,
sp sahu
Hi,
Why do you want to block them?
Setting the delivery completed flag is the normal way to close a PO.
It does not stop further receipts from being posted to it but if you are just tidying up the open POs the DCI flag is all that is needed.
Steve B
Similar Messages
-
URGENT- SERVICE ORDER CLOSING IN MASS MAINT...
Dear Guru
in our plant there are severat old service order which are pending to close
there is no item code or service no. in order
IS THERE ANY MASS MAINTAINANCE FOR SERVICE ORDER CLOSING.
urgent required
DEV...Dear
for mass maint required a table name but we have no material code so how to get it pls define steps for the same.
regds
dev... -
Can I mass volume increase for all songs???
Can I increase the volume on all of my songs within iTunes without doing them individually?
Thanks!
MikeSure, simply do a Select All (Command-A), then Get Info, and then under options change the volume. It will be changed in bulk for how ever many songs you had selected. So you can do this for a couple songs, a whole album, or your entire library if you wish.
Patrick -
Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast
Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
I appreciate any and all input, thankyou.I had to edit to reflect its Mavericks 10.9
-
"No Speakers or headphones plugged in"?
HP Pavilion dv6z-3200 CTO Select Edition Entertainment Notebook PC
Windows 7 Home Premium 64-bit (6.1, Build 7601)
Sound: In-built speakers
ATI High Definition Audio Device ("Location 0 (Internal High Definition Audio Bus)")
I have followed all the instructions @ "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us..." but even after reinstalling (via Recovery Manager) the audio driver my sounds still does not work.
Running the audio troubleshooter: "Troubleshooting couldn't identify the problem"
From there, "View detailed information"
"Check audio device: Issue not present
One or more audio service isn't running: Issue not present"
HP Support Assistant:
Device | Status | Driver | Version
ATI High Definition Audio Device | Enabled | AtiHdmi.sys | 7.11.0.7706
Control Panel > Hardware and Sound > Sound > Manage audio devices > Playback :
ATI HDMI Output
ATI High Definition Audio Device
"Not plugged in" (shows a red down arrow)
under the "ATI High Definition Audio Device Properties" Device status I get : "This device is working properly."
Issue: My inbuilt speakers do not work at all. I have tried jacking in my headphones multiple times yet still no sound. I did not download anything or install anything prior to this. I have run anti-virus and there are no viruses.
The issue first started when I tried running a Windows Media Player playlist I had just made. The playlist would open WMP but would not play any of the songs, upon trying to close it my laptop had long durations of lag. I tried making another playlist to see the result. The result was the same, however, after this attempt the audio icon in the system tray would not let me change the volume. In response, I attempted to restart my computer. At the closing screen my volume (IDT program?) was constantly opening and closing or something, keeping me from restarting my computer so I "Force Quit". When I was back at the desktop after restarting, my audio no longer worked along with the "No speakers or headphones are plugged in" message.Hey laylay93,
Thank you for joining the HP Support Community!
I am sorry to hear that your G6 notebook is not playing any sound. I will do my absolute best to assist you in hopes of getting the sound restored on your notebook.
So that I can assist you in the best way that I can, I do need a bit more information from you.
1. What is the full model number of your G6 notebook? I have included the document Guide to finding your product number.
2. Can you confirm if you are currently running Windows 8, or Windows 8.1. If you need assistance in finding the current version of Windows that you are running, I have included the document Which Windows operating system am I running?.
Looking forward to working with you on this issue!
I worked on behalf of HP -
Java Platform and Technologies Take Center Stage at GIDS 2010
Great Indian Developer Summit 2010 u2013 India's Biggest Polyglot Conference and Workshops for IT Software Professionals
Bangalore, April 9, 2010: The GIDS.Java Conference and Workshops has announced the complete program of over 50 sessions on the present and future of the Java language and VM, how they are evolving to meet the community's ever-changing needs, and some of the cutting-edge tools, technologies & techniques used for building robust enterprise Java applications today. The GIDs.Java track at Great Indian Developer Summit takes place 22 and 23 April 2010, at the Indian Institute of Science in Bangalore.
As one of the longest running independent developer conferences in India, GIDS.Java at the Great Indian Developer Summit 2010 is uniquely positioned to provide a blend of practical, pragmatic and immediately applicable knowledge and a glimpse of the future of technology. During 22 and 23 April 2010, GIDS.Java offers a multi-track conference, workshops, expo show floor, and networking opportunities.
The first keynote at GIDS.Java "Pointy Haired Bosses and Pragmatic Programmers" is led by Dr. Venkat Subramaniam. He speaks about how each of us has a professional responsibility to be objective and make decisions that will help us and our teams be productive and deliver results. Venkat will pick on some fallacies, lay down facts, and discuss how to stay professional and objective in our daily efforts.
The second keynote of the day explains the practical features that make the Cloud so interesting, and why everyone should start using it in their everyday life. Simone Brunozzi, Amazon Web Services Technology Evangelist, will detail technical examples, business details all mixed with a lot of Italian humor to ensure audience enjoy this talk without a single line of code.
The third keynote of the day gives an exciting overview of directions in the Java space for Oracle, featuring concrete signs of Oracles heavy investment, a clear concise strategy overview, and deep dives into some of the most interesting pieces of technology being developed in the Java Platform Group today; such as JavaEE, JDK7, JavaFX, and our exciting new visual tools. Featuring demos by a Java evangelism team star, Simon Ritter, this talk takes you top to bottom in Java Technology.
Featured talks at GID.Web include:
Good, Bad, and Ugly of Java Generics, Venkat Subramaniam
Pure Java Ajax: An Overview of GWT 2.0, Marty Hall
How JPA 2.0 Makes a Good Thing Even Better, Mike Keith
Building Enterprise RIAs with Adobe Flex and Java, Sujit Reddy G
Integrated Ajax Support in JSF 2.0, Marty Hall
Design Patterns in Java and Groovy, Venkat Subramaniam
A Gentle Introduction to iPhone and Obj-C for Java Developers, Matthew McCullough
Cloud Computing: Azure for Java Developers, Janakiram MSV
Ajax Support in the Prototype JavaScript Library, Marty Hall
First steps to IT Heaven Through the Cloud. Part III: .Java, Simone Brunozi
Building Web 2.0 User Interfaces for Web Service Models using JSF, Frank Nimphius and Jobinesh P
Acceptance Test Driven Development, John Tobin and Mohammed Mohsinali
Architecting Your Java Applications for the Cloud, Praveen Srivatsa
Effective Java, Venkat Subramaniam
The Amazing Groovy Weight-loss Plan, Scott Davis
Enterprise Modeling - from Conceptual Planning to Technical Blueprints, J Sripad
Java Collections Renaissance, Donald Raab and Vlad Zakharov
Power 7 and IBM J9VM, Himanshu Goyal
A Whistle-stop Tour of Maven 3.0, Matthew McCullough
Mass Volume Opportunities for Java Developers, Jouko Nuottila
Emerging Technology Complex Event Processing, Duvvuri Srinivas
Agile ALM for Distributed Development, Karthi Swaminathan
Dim Sum Grails - A Sampler of Practical Non Database-Driven Grails Applications, Scott Davis
Diagnosing Performance Bottlenecks in J2EE, Deepak Kaul
Business Driven Identity Management, Suneet Agera
Combining Java EE with OSGi using Eclipse Gemini, Mike Keith
Workshop: Essence of Functional Programming, Venkat Subramaniam
Workshop: Agile Development, Tools, and Teams and Scrum Certification, Stephen Forte
Workshop: Cloud Computing Boot Camp on the Google App Engine, Matthew McCullough
Workshop: Building Your First Amazon App, Simone Brunozzi
Workshop: The 180-min AJAX and JSON Spike Class, Scott Davis
Workshop: PHP + Adobe Flex = Killer RIA, Shyamprasad P
Workshop: User Expereince Evaluation Model Walkthrough, Sanna Häiväläinen
Workshop: Building Data Centric Applications using Adobe Flex and Java, Prashant Singh
Workshop: Monetizing your Apps with PayPal X Payments Platform, Khurram Khan, Praveen Alavilli
Sponsors of Great Indian Developer Summit 2010 include: Platinum sponsors Microsoft, Oracle Forum Nokia and Adobe; Gold sponsors Intel and SAP; Silver sponsors Quest Software, PayPal, Telerik and AMT.
About Great Indian Developer Summit
Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore.
At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world.
For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/
A Saltmarch Media Press Release
E: info AT saltmarch dot com
Ph: +91 80 4005 1000
Edited by: wonkim785 on Apr 14, 2010 8:23 AMIm not sure if this is the right place to post this, but anyway thanks for the info :)
-
Hi this code for java i am having major problems. I am a newbie to java so please be kind and hope in the feature i can master java and then help to each others. I will include the show GUI class later.
My main problem is how to assign events to the button so that it preforms a calculation.
Second what should make my GUI run properly and what actions do i need to take.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ConvertValues extends JPanel {
public class ConvertValues {
JFrame window;
JComboBox inputcombo,outputcombo;
JRadioButton Length,Mass,Volume,Temperature;
JButton = new JButton("Convert");
JTextField outputtext, inputtext;
public ConvertValues(){
window = new JFrame("Imperial to Metric Converter");
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setSize(600,600);
window.setVisible(true);
addRadioButtons();
addComboBox();
public void addPanel(){
Public JPanel getPanel();
JPanel wrapper = new JPanel();
wrapper.setLayout(new BorderLayout());
wrapper.setBorder(BorderFactory.createEmptyBorder(13,13,13,13));
JPanel centre = new JPanel ();
centre.setLayout(new GridLayout(2,2));
public void addRadiobButton(){
JRadioButton RadioButton = new JRadioButton();
JPanel rbut = new JPanel();
rbut1.setLayout(new GridLayout(4,4));
JPanel panel1 = new JPanel();
JLabel metric = new JLabel (" Length Metric Values")
panel1.add(metric);
rbut1.add (panel1);
JPanel panel2 = new JPanel();
JTextField text1 = new JTextField (13);
panel2.add(text1);
rbut1.add(panel2);
JPanel panel3 = new JPanel();
JLabel imperial = new JLabel ("Length Imperial Values")
panel3.add(Imperial);
rbut1.add (panel3);
JPanel panel4 = new JPanel();
JTextField text2 = new JTextField (13);
panel4.add(text2);
rbut1.add(panel4);
JPanel rbut2 = new JPanel();
rbut2.setLayout(new GridLayout (4,4));
JPanel panel5 = new JPanel ();
JLabel metric2 = new JLabel ("Liquid Metric Values");
panel5.add(metric2)
rbut2.add(panel5);
JPanel panel6 = new JPanel ();
JTextField text3 = new JTextField (13);
panel6.add(text3);
rbut2.add(panel6);
JPanel panel7 = new JPanel ();
JLabel imperial2 = new JLabel ("Liquid Imperial Values");
panel5.add(imperial2)
rbut2.add(pane7);
JPanel panel8 = new JPanel ();
JTextField text4 = new JTextField (13);
panel8.add(text4);
rbut2.add(panel8);
JPanel rbut3 = new JPanel();
rbut3.setLayout(new GridLayout (4,4));
JPanel panel9 = new JPanel ();
JLabel metric3 = new JLabel (" Mass Metric Values");
panel9.add(metric3)
rbut3.add(panel9);
JPanel panel10 = new JPanel ();
JTextField text5 = new JTextField (13);
panel10.add(text5);
rbut3.add(panel10);
JPanel panel11 = new JPanel ();
JLabel imperial3 = new JLabel ("Mass Imperial Values");
panel11.add(imperial3)
rbut3.add(pane11);
JPanel panel12 = new JPanel ();
JTextField text6 = new JTextField (13);
panel12.add(text6);
rbut3.add(panel12);
JPanel rbut4 = new JPanel();
rbut4.setLayout(new GridLayout (4,4));
JPanel panel13 = new JPanel ();
JLabel metric4 = new JLabel (" Temperature Metric Values");
panel13.add(metric4)
rbut4.add(panel13);
JPanel panel14 = new JPanel ();
JTextField text6 = new JTextField (13);
panel14.add(text6);
rbut4.add(panel14);
JPanel panel15 = new JPanel ();
JLabel imperial4 = new JLabel ("Temperature Imperial Values");
panel15.add(imperial4)
rbut4.add(pane15);
JPanel panel16 = new JPanel ();
JTextField text7 = new JTextField (13);
panel16.add(text7);
rbut4.add(panel16);
radiopanel.add("Length","rbut1")
radiopanel.add("Liquid Mass","rbut2")
radiopanel.add("Mass","rbut3")
radiopanel.add("Temperature","rbut4")
public void addComboBox(){
JPanel panel17 = new JPanel();
String[] str = {"Milliimeters", "Centimeters", "Meters", "Kilometers"};
JComboBox metricvalues = newJComboBox(str);
panel17.add(metricvalues);
rbut1.add(panel17);
JPanel panel18 = new JPanel();
String[] str2 = {"Inch", "Foot", "Yard", "Mile"};
JComboBox imperialvalues = newJComboBox(str2);
panel18.add(imperialvalues);
rbut1.add(panel18);
JPanel panel19 = new JPanel();
String[] str3 = {"Litres", "Millilitres", "Litres"};
JComboBox metricvalues = newJComboBox(str3);
panel19.add(metricvalues);
rbut2.add(panel19);
JPanel panel20 = new JPanel();
String[] str4 = {"Fluid", "Ounce", "Pint", "Quart", "Gallon"};
JComboBox imperialvalues = newJComboBox(str4);
panel20.add(imperialvalues);
rbut2.add(panel20);
JPanel panel21 = new JPanel();
String[] str5 = {"Grammes", "Kilogrammes", "Metric Tonne"};
JComboBox metricvalues = newJComboBox(str5);
panel21.add(metricvalues);
rbut3.add(panel21);
JPanel panel22 = new JPanel();
String[] str6 = {"Ounce", "Pound", "Stone", "Long Ton"};
JComboBox imperialvalues = newJComboBox(str6);
panel22.add(imperialvalues);
rbut3.add(panel22);
JPanel panel23 = new JPanel();
String[] str6 = {"Grammes", "Kilogrammes", "Metric Tonne"};
JComboBox metricvalues = newJComboBox(str6);
panel23.add(metricvalues);
rbut4.add(panel23);
JPanel panel24 = new JPanel();
String[] str7 = {"Ounce", "Pound", "Stone", "Long Ton"};
JComboBox imperialvalues = newJComboBox(str7);
panel24.add(imperialvalues);
rbut4.add(panel24);
frame.getContentPane().add(center, BorderLayout.CENTER);
public void addLabelandtext();{
inputlabel = new JLabel("Enter Value");
valuelabel = new JLabel("0");
metricLabel = new JLabel ("Metric Value");
imperial value = new JLabel("Imperial Value");
outputtext = new JTextField(8);
inputtext = new JTextField (8);
JPanel labelpanel = new JPanel();
labelpanel.add(inputlabel);
labelpanel.add(mJPanel panel25 = new JPanel();
labelpanel.add(imperiallabel);
labelpanel.add(valuelabel);
labelpanel.add(outputtext);
labelpanel.add(inputtext);
JPanel top = new JPanel(new GridLayout(5,3));
middle.add(labelpanel);
frame.getContentPane().add(middle,BorderLayout.SOUTH);
public void ConvertButton();{
JPanel panel25 = new JPanel();
JButton convert = new JButton ("CONVERT");
Convert.addActionListener(this);
panel25.add(convert);
rbut1.add(panel 25));
JPanel panel26 = new JPanel();
JButton convert = new JButton ("CONVERT");
Convert.addActionListener(this);
panel26.add(convert);
rbut2.add(panel 26));
JPanel panel27 = new JPanel();
JButton convert = new JButton ("CONVERT");
Convert.addActionListener(this);
panel27.add(convert);
rbut3.add(panel 27));
JPanel panel28 = new JPanel();
JButton convert = new JButton ("CONVERT");
Convert.addActionListener(this);
panel28.add(convert);
rbut4.add(panel 28));
public void LengthConverter();{
Let measurement = TextIO.getDouble()
Let units = TextIO.getlnword();
if the units are inches
Let inches = measurement
else if the units are milimeters
Let inches = measurement*25.4
else if the units are Foot
Let centirmeter = measurement*30.48
else if the units are Yard
Let meter = measurement*0.9144
else if the units are mile
let kilometers = measurement*1.609
else if the unit are meters
let centimeters = measurement*100
else
The units are wrong!
Print an error message and stop processing
let milimeter = inches/25.4
let foot = centimeters/30.48
let Yard = meter/0.9144
let mile = kilometers/1.609
let meter = centimeter/100
dispay the results
public void VolumeConverter();{
Let measurement = TextIO.getDouble()
Let units = TextIO.getlnword();
if the units are Fluid Ounce
Let Fluid Ounce = measurement
else if the units are mililitres
Let Fluid Ounce = measurement*28.41
else if the units are Pint
Let Litres = measurement*0.568
else if the units are Quart
Let Litres = measurement*1.14
else if the units are Gallon
let litres = measurement*4.54
else if the unit are litres
let centilitres = measurement*100
else
The units are wrong!
Print an error message and stop processing
let mililitres = Fluid Ounce/28.4
let Pint = Litres/0.568
let Quart = Litre/1.14
let Gallon = Litres/4.54
let litre = centilitre/100
dispay the results
public void WeightConverter();{
Let measurement = TextIO.getDouble()
Let units = TextIO.getlnword();
if the units are Ounce
Let Ounce = measurement
else if the units are Grammes
Let Ounce = measurement*28.35
else if the units are Pound
Let kilograms = measurement*0.4536
else if the units are Stone
Let Kilogrammes = measurement*6.3503
else if the units are Longton
let metric tonne = measurement*1.016
else if the unit are Gramme
let Killogram = measurement*100
else
The units are wrong!
Print an error message and stop processing
let Gramme = Ounce/28.35
let Pound = Kilogram/0.4536
let Stone = Killogrammes/6.3503
let Longton = metrictonne/1.016
let Gramme = Kilogram/100
dispay the results
private static void createAndShowGUI();{
ConvertValues newScreen = new ConvertValues();
}My main problem is how to assign events to the button so that it preforms a calculation. [url http://java.sun.com/docs/books/tutorial/uiswing/components/button.html]How to Use Buttons
Also, use the "Code Formatting Tags" when posting code so it retains its original formatting and is readable. -
Dear Apple,
I really like the idea of the iPhone, but it's just too fragile. I need a phone that has a rugidized clamshell design, and all the buttons on the outside of the phone are automatically locked when the phone closes. It also needs to have that phone charm hole in the top of the phone. See, I keep my phone in my front pocket and I attach my keys to the charm hole. That way I can't loose my keys, and I always have them for opening boxes at work. Because of my work, my phone gets beat to death while still in my pocket. My keys swing and hit it, it falls out of my pocket constantly, I balance heavy boxes on the front of my hips (where my phone sits), so I can't have an iPhone as it exists right now.
So here's my ideas. I have a Samsung Rugby, so let's start there. The iPhone Rugby should be wider and thinner, so the touch screen has the room to get bigger. When the phone is open, the bottom is the touch screen, the top is a regular screen, kinda like a DS. All the buttons on the outside of the phone are all located on the sides of the phone, no buttons on the front. And the only button that works when the phone is closed is the volume button that turns the ringer off when you don't want to answer that call.
The touch screen on the bottom should default with the usual 2abc 3edf format with T9 so when I'm balancing boxes in my left arm, I can text with one hand. The top screen can pivot and turn sideways for those that want a Qwerty, but I personally prefer T9. One hand texting is really important for me.
So when you figre out how to make a ruggid clamshell that won't pocket dial, doesn't require locking your buttons, has a piece I can attach my keys to, and can withstand being hit and dropped and beaten, let me know. Thanks.
With Love,
NikkiMe! Who Else?- Actually, My usage on the IPhone tops all your concerns/Issues/Ideas. I have a landscape construction company (as a second income) where the work and preform activities that make your durability concerns seem minor. I keep the IPhone in my pocket (sometimes with a cover, the otterbox brand+ a zagg invisible shield, sometimes without) and frequently carry paving stones, concrete debris, tools of all shapes and forms, get thrashed around in my skid steer (bobcat) and generally grind the IPhone into the these tasks and more! I keep the screen towards my leg side and it has been the only phone I have owned to even make it close to lasting the duration of my three year cell contract! I have dropped the phone in sand, loam, clay mud, and once into wet concrete! A quick dust-off with compressed air and wipe was all it needed.
On an aside, I went ski touring this past winter and forgot to take the phone out of my sweaty pants for the ascent up and nearly soaked the IPhone with sweat. I dried the phone on the front defrost of my car when we returned and I (and my friends alike) were amazed that the IPhone had better reception in the Rogers Pass area (in Canada) than all the other phones.
I work as well in a hospital as a professional (Nurse) and use the IPhone there as well for calculations and reference.The Iphone is perfect as it's smooth, nearly buttonless features allow me to clean the phone effectively with bactericidal wipes at the end of each shift. Imagine a flip phone, or a phone with all those nooks and crannies for viruses and bacterias to hide? Disgusting!, considering there are so many keyboards in the hospital. Maybe the IPad will make an appearance in hospitals one day?
Anyways, I dispute your ideas and challenge them with my own experiences! -
Automount of SD card & USB external HDD with strange KDE pop up msg
Today I reviewed lots of threads posted over the last year and some bug reports too about this issue, but it's happening for me too. Both SD card and USB external HDD have autodetectable filesystems on them because I can mount them by hand with "mount /dev/mmcblk0p1 /mnt" and "mount /dev/sdb1 /mnt". But it would be nice if I didn't have to do that.
Although I didn't notice which explicit install that I did pulled them in as dependencies, I do have udisk2 and polkit installed. Also installed udiskie as a wrapper. I've been mounting these volumes by hand before now because I feel like I'm still learning the ropes of The Arch Way and guessed (apparently incorrectly) that mounting volumes by hand was just part of "The Arch Way". But based on some threads here and some bug reports, I guess this used to work in Arch but has been causing some problems for some people lately when they upgrade. I just installed Arch for the first time (using the 2015.02.01 iso image), so I don't have any background to go on.
So what is The Arch Way for automounting external drives? I've skimmed the wiki article for this and because "Development of udisks has ceased in favor of udisks2." it seems that udisks2 is preferred. But it got installed and the daemon is running for me. The user is in the wheel group. dbus is running (though like one person who filed a bug, I too have several instances of dbus in my ps -aux output and I'm not sure if that is as it should be or not). I've done no special configuration ("not wittingly" anyway; I promise, my name is not James Clapper) that I think would have affected this.
So for a newb with no special preference, how should automounting be configured in a new Arch system? In other words, what should be my first steps in trying to solve this problem for myself? I know there are lots of different ways to skin this cat, but I'd prefer the simplest and most elegant solution that does not depend on KDE or GNOME or other unnecessary tools. I've just (with this Arch system I just installed) begun using i3wm and I think I'll be sticking with it. That said, however, it's clear that I inadvertently/unwittingly managed to get some elements of KDE into memory as the following http://gamonics.org/img/2015-02-26-1731 … _scrot.png shows. This popped up both times, when I plugged in my SD card and when I plugged in my USB drive. Any thoughts on what's going on here? I did install okular explicitly because I think it's one of the best PDF viewers, but I don't understand why KDE is reporting anything to me when I'm running i3 and insert an SD card or a USB disk.
And in the terminal, I get this output (apparently from udiskie):
[root@archippocrates archie]# Failed to show notification: The connection is closed
not adding /org/freedesktop/UDisks/devices/mmcblk0: unhandled device
mounted /org/freedesktop/UDisks/devices/mmcblk0p1 on /media/3532-3338
Failed to show notification: The connection is closed
Although the volume does get mounted automatically.
Thanks for any thoughts.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Gamonics (2015-02-27 00:25:01)I personally can't answer the question of "simplest and most elegant" way of mounting devices. It all depends on what you want. If you expect more exotic functionality, say correct unmounting of devices if they were disconnected during a sleep cycle, there's probably no way around udisks2. For that you get a complex piece of software prone to... unexpected behaviour. Mind you some of it is related to front-ends like GVFS.
As to your KDE issues, last I checked mount handling was disabled by default there, but you can control it manually (see man kcmshell4). Though I haven't followed up on KDE 5 developments. If going with udisks2, I'd recommend using devmon from the udevil package as a front-end (more details on the wiki udisks page).
PS: multiple dbus instances are expected, check the user names and specified arguments in the ps output.
edit: grammar. :X
Last edited by Alad (2015-02-27 17:03:31) -
Archivelink and scan client software
Hello,
We are setting up a simple archivelink system: linking scanned invoices to FI documents in R3.
The storage is in the R3 database and since we don't have such a mass volume of documents, we are satisfied with the standard archielink solution and we think that we can manage without buying an expensive third party archiving tool.
The only problem we encounter is in the scanning part: When using a third party tool (like Ixos for example) the image is linked directly from the scan client to R3 and is linked to the object.
I can't manage sending commands to my scanner, it seems that those parameters have to be maintained in 'applications' part of AL customizing.
If anyone has any hints or tips on how to do this, please post them here and I will reward them with lots of reward points !
Thank you very much
RonenHi,
if you work with the content server or a R3 database you use the HTTP interface. SAP Content Server and R3 Database repository don't support the OLE archiveLink scenario. What you could do is the following:
1. Early archiving: you scan into the file system. You write a report that is archiving the documents via the SCMS API of Kpro. Then you start the workflow.
2. Late archiving: you scan into the file system with a list barcode -> filename. Then you write a report which is calling BAPI_BARCODE_SENDLIST and the images are linked with the BO object.
The reports have to be planned as jobs.
Best regards
Torsten -
Work Order not appearing in ASCP workbench
I have a sales order for 1 unit for an ATO item and a WO for the same item has been created by progressing the SO.
WO is also marked as FIRM in the Discrete jobs form.
MRP net quantity on WO is 1.
SO is past due.
WO completion date is 14th August 2014
WO status is UNRELEASED
Upon the running the unconstrained plan, the sales order appears and a planned order is created.
Why is the WO not shown in the ASCP workbench?
Note: Before i marked the WO as firm, it was shown in the workbench and was pegged to the SO. But not after marking it as FIRM in the Discrete jobs form.Can you check if your job is present in this view mrp_ap_wip_jobs_v and if not then check the underlying queries filtering job out..
Also what is the job status, please note that out of all the below statuses only the below bold one are collected.
Unreleased
Released
Complete
Complete - No Charges
On Hold
Cancelled
Pending Bill Load
Failed Bill Load
Pending Routing Load
Failed Routing Load
Closed
Pending - Mass Loaded
Pending Close
Failed Close
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered -
Newb question: can anyone tell me what these Speedfan temps mean???
I just built my first PC (P6N SLI-FI board and Core 2 Duo 6420 chip) and I've got a few questions about cooling (I'm using the stock cooler and the thermal paste that came with the chip):
1. I installed Speedfan, but I'm not sure what each temp refers to. After having the machine run Windows XP for a minute or two, here are my approximate readings (all in degrees Celsius, obviously):
Temp1= 23
Temp2= 30
Temp3= 145 (I think this is an error due to lack of a sensor)
HD0 = 23
Core0 = 23
Core1 = 23
After playing Neverwinter Nights 2 for about an hour, Temp2 reaches about 45 (all of the other readings are lower, somewhere in the 30s I think, but I can't remember for sure).
2. I'm going to be using my computer mostly for gaming. What temps should I try to stay below? Should I think about using Artic Silver 5? (I really wanted to use it when I put the machine together, but I wimped out because I was worried about voiding the warranty with Intel )Quote from: Snaggly Pete on 24-May-07, 23:09:08
Thanks for the info. So, none of the temperatures I've listed represent the ambient temperature? How do I find out what the ambient temperature is?
The temp in my house was probably about 70F (I didn't actually check at the time) when I measured those temperatures and yes core0 and core1 were roughly 23C. Again, I only had the computer on for a minute or two when I checked SpeedFan.
Sorry for the delay in responding to your question!
As far as case temperature, I've gone as far as suspending a household thermometer in the vicinity of the HS fan.
Fact: It is impossible for any air-cooling solution to cool the processor below the temperature of the intake airflow. Air cooling solutions, as well as liquid cooling solutions, rely on convection (+conduction and radiation) to transfer the heat off of the CPU. The amount of heat the air mass/flow can absorb is limited by the temperature of the air mass, volume and partial pressure across the heatsink(s). Except for the short time the HS is transitioning from a cooler, non-operational state, where the HS may be cooler than the incoming airflow caused by a newly started system, to the operational state with both case temperature and CPU temperature increasing, the temperature of the HS will always be above the temperature of the surrounding air.
So, given a 70F/21C room temp, you should expect the 'system' (mobo) and core temperatures to be at or probably slightly above 21C if you check Hardware Monitor in BIOS immediately and as much as 10 - 15 degrees C higher by the time you check them in the OS. Again, those figures may be lower or higher by a few degrees depending on the HS/HSF used.
Remember, when evaluating operating temps, always use the delta between case temperature and core temperature (or whichever system temp) rather than the temperature in question on its own. Say you are given two systems that use all the same components except the cooling solution. System A uses air-cooling solution 'Ace' and has a case temperature of 38C with core temps of 43C on each core, while System B uses cooling solution 'Best' and has a case temperature of 23C and core temps of 34C. Which is the better solution?
The answer is probably TEC.
TB -
Migrate home directories from NW6.5/NSS to OES2/NSS
Hi
Is there a way to migrate the user home directory from NW65 to OES2/Linux in the same tree and copy trusties and change the users home directory setting in the user object?
I've looked at the migration tool in OES2 but I can only copy data, and not trusties and change home directory...
/JonasI use a utility called HOMES...by HBware...slick!
I have also used a utility called (I think) Mass volume changer...that was slick too. HOMES is the more powerful, though. Both are freeware.
--El
Originally Posted by jonhol
My mistake... Trustees are copied. Just my luck that when I tested I randomly selected a homdir and that one had no trustees as someone deleted the user object without deleting the directory...
Tried wit another homedir and it worked just fine.
Just the problem with changing the home directory in the user object left to solve...
/Jonas -
Hi All,
What is the difference between SAP IS-T RM-CA and IS-U FICA. Can any body please explain in detail.
Thx
Will.This is not fully correct.
There is a clear difference in the Master Data Management of FICA and RMCA. FICA is built up with the concept of one Business Partner to one ore many Contract Accounts, one Contract Account has connection to one ore more contracts. Contract is linked to the technical part of SAP Utilities via the move in process here the Business Master data and the Technical Master data is joined via this process.
RMCA are only working with the concept of Business Partner and Contract Account, and have no direct link to the Technical Master date in Telecoms.
However in the configuration, FICA and RMCA is nearly the same. But when it comes to standard integration to the rest of the SAP world, e.g. SAP Financial Supply Chain Management (FIN-FSCM). The integration possibilities are depending on the release you are working on. E.g. Contract Accounts Receivable and Payable (FI-CA) As of Industry Release 4.72 Note that the integration for Contract Accounts Receivable and Payable (FI-CA) in releases that are earlier than SAP ERP 2005 is subject to a restricted level of functions. There is no standard integration for RMCA, the same principals using dunning by dunning strategies can be used, but this need to be run via FCC Financial Customer Care (CRM) by the use of Industry Business Function Set and special functionality integrating RMCA to FCC.
If other areas have the same restriction, if you have both FICA and RMCA activated, you can view the integration to other SAP components.
Both systems is build for mass volume handling in receivables.
Per Engholt -
Hello guys,
We create SD Billing Document that are transferred in FICA. We would like to know if it is possible to not update the "Profitability Segment field = FKKOPK-PAOBJNR" since CO-PA is updated during the initial creation of the billing document.
Thanks in advance, for your cooperation.
Kind regards,
Panagiotis KelerisThis is not fully correct.
There is a clear difference in the Master Data Management of FICA and RMCA. FICA is built up with the concept of one Business Partner to one ore many Contract Accounts, one Contract Account has connection to one ore more contracts. Contract is linked to the technical part of SAP Utilities via the move in process here the Business Master data and the Technical Master data is joined via this process.
RMCA are only working with the concept of Business Partner and Contract Account, and have no direct link to the Technical Master date in Telecoms.
However in the configuration, FICA and RMCA is nearly the same. But when it comes to standard integration to the rest of the SAP world, e.g. SAP Financial Supply Chain Management (FIN-FSCM). The integration possibilities are depending on the release you are working on. E.g. Contract Accounts Receivable and Payable (FI-CA) As of Industry Release 4.72 Note that the integration for Contract Accounts Receivable and Payable (FI-CA) in releases that are earlier than SAP ERP 2005 is subject to a restricted level of functions. There is no standard integration for RMCA, the same principals using dunning by dunning strategies can be used, but this need to be run via FCC Financial Customer Care (CRM) by the use of Industry Business Function Set and special functionality integrating RMCA to FCC.
If other areas have the same restriction, if you have both FICA and RMCA activated, you can view the integration to other SAP components.
Both systems is build for mass volume handling in receivables.
Per Engholt
Maybe you are looking for
-
How may I open Pages '08 docs in Pages for Mac? Requires saving to Pages '09 which I don't have.
How may I open Pages '08 docs in Pages for Mac? Requires saving to Pages '09 which I don't have.
-
Elements 7 editor has stopped working
Dear elements 7 community, I have using elements 7 for four years on my windows 7 computer with very little problem. It seemed a very stable program. This program came free. I also use Lightroom 4 However now my elements editor has stopped working. E
-
Service level agreement application
we are considering investing in a service level agreement application through which we can better monitor and deliver more consistent, and predictable performance levels to our Oracle end users there are few applications that can do the job, includin
-
Not able to connect to Coherence JMX
We have a 4 node coherence cluster with 2 weblogic application server nodes and 2 coherence server nodes. In one of the coherence server nodes we have set the following JMX related properties- tangosol.coherence.management=all tangosol.coherence.mana
-
I have a Nikon D200 which I recently upgraded from a D100. iPhoto imported the Raw NEF files from the D100 no probs. It refuses to import the D200 NEF files for some reason, giving error messages when I try. Could the NEF files be different on the D2