Closing applications that use the internet to improve Skype convo

When using Skype, there is a horrible lag time and I can only hear the person half of the time. How do I correct this?

Hello Kerry,
Thank you for the details of the issue you are experiencing with the Skype app on your iPad mini. I recommend the steps in the article below. You can skip the step to install another app from the App Store and any other steps you have already taken:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available). Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
If I have to downgrade to LabView 2012, where can I get the installation for this?

Any app that uses the internet quits immediately ater opening, HELP!

Any app that uses internet closes immediately after opening, app crashes. Safari opens fine and can use the internet. iPod software is up-to-date.
iPod Touch 32GB

had this problem for iphone 4... back up your ipod, then restore it and that should fix it
if not then reply again and ill give you a different option

Application that uses the accelerometer in E52, E7...

It's not a question but I would like to suggest this game applcation called SymbiMaze that uses the acccelerometer feature of E52 and E72 and other new Nokia series phone
http://symbimaze.sourceforge.net/
At least now we could confirm that the accelerometer is working as it should.
Salvation entails eternal power which will make every tyrant weep.

deadkenny wrote:
FastTortoise wrote:
Some people might be wondering how to see if their accelerometer is working perfectly. The only way to see this is to install one of those games. Ovi map used to rotate but not anymore I believe.
You have to activate the compass now in Ovi Map using the '5' key, and you need to calibrate it by waving the phone about in various directions until the compass goes green, then the map will rotate.
There's also a separate 'GPS Data' app on the E72 at least which has a compass though I've not got it working.
Not sure if the compass stuff uses the accelerometer or something else (I've read 'magnetometer', but maybe it's the same thing).
P.S. There's an app called NorthPole which is basically a compass also. Not tried it.
I think the accelerometer (orientation sensor) and the magnetometer (digital compass) are 2 different things in the E72.
One senses the orientation whereas one detects the north pole (magnet).
For checking the map orientation, aside from the free NorthPole app there's also the N97Compass which works similarly. I prefer the N97Compass since it doesn't require you to do the pre-requisite "Calibrate" first before it will work. Granted, when you don't calibrate while using the N97Compass, it will attempt to find the North pole but will say "signal: bad" until you calibrate. ;-)
The EDGE game seems to work well on my E72. Although the screen does seem small for this game. I think it isn't directly downloadable to the E72. I had to select another cellphone from the Ovi Store (from PC web browser) and then "send to friend's cellphone #" (my number) and open it with my E72 before the app gets downloaded.

My ipad will not connect to anything that uses the internet.

I have owned it for over a year and suddenly it exits out of Safari, Netflix, iTunes, iBooks.... etc. It's not the wifi itself because we have Apple laptops that work just fine. I click on iTunes and then it just exits out of it and goes back to the homescreen. This is just irritating the BEJEZUZ out of me and I feel like smashing it right now! This has been going on for a few weeks now HELP!!!

Try two things:
1. Unplug (literally) your router for a few seconds, then plug it back in
2. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go fo both buttons and your iPad will restart.
See if you can then access the internet.........

Is there any way to incorporate elements from the 2006 namespace in an application that uses the 2

I have a desktop app built in AIR using the 2009 namespace. Is there any way to incorporate any of the of the xmlns:mx="http://www.adobe.com/2006/mxml" components into it?
Or better yet, since the AIR namespace is sort of layered on top of the spark namespace, is it possible to do the same with the 2006 namespace?

xmlns:mx="library://ns.adobe.com/flex/mx" is the spark mx address, which is completely different than the original 2006 mx library.
The thing is: I love AIR, hate spark, loved the 2006 pre-spark functionality. It is so much more convenient and user friendly. Given the choice between having the display seperate from the processing, or having it be convenient and easy to work with, I choose the later option.
For the most part it seems like the AIR api is like a layer on top of the spark - flex system.. I would like to be able to over lay the same AIR functionality on top of the the old system....
Possible or no?

Plug-ins that use the internet

Hello Community,
I am interested in writing a Premiere plug-in that can upload/download files to a URL from Adobe Premiere. Is there API functionality that lets me do this? More generally, is it possible to write this into a plug-in?
Thanks much.
Best,
James

PPro panels are (basically) web pages, and can upload/download files, using common web frameworks, as you wish.
Get panel sample and docs here: http://www.adobe.com/devnet/premiere.html
What are you trying to build? Feel free to write me directly; bee bee bee at adobe dot com

Safari is the only application that can successfully use the internet.

Dear all,
I have been having internet problems for the past couple of weeks, that started fairly suddenly. The problem is that any of my internet-using applications cannot use the internet, apart from Safari. Browsing and downloading through Safari work seamlessly, but all other uses of the internet fail.
For example, Messenger for Mac gives me a message indicating that I am not connected to the internet. Skype also does this, and the iTunes Store tells me that the host is down, and that I should check my internet connection and try again. Software Update is another application that cannot function as a result of this problem.
I am living in student halls at university, so my internet connection is an ethernet cable plugged into the wall, and therefore I have no access to the behind-the-scenes things. I have contacted my internet provider (Ask4), to ask if they'd changed anything, but they said not, but are very willing to do anything they can to help me.
It has been suggested to me that I simply create a new location in network settings, and that this would remedy the problem, but it didn't work.
Another suggestion was to temporarily disable the firewall, but this also didn't help.
Does anyone have any suggestions as to what I could try next, because I'm all out of ideas, and I can't find anyone with the same problem.
Any help would be well-appreciated.
Thanks
Tom

i figured it out. reboot the phone. its an ios4 bug that once you turn the orientation lock on once and back off, the photos wont rotate and you have to reboot. hopefully a fix comes soon

Random IP Addresses stopping me use the internet

Not sure how best to explain this, as it is an intermittent problem.
I have a macbook pro that uses the internet fine, no problems. I have a small PC laptop that uses the internet fine, no problems. I have a Power PC dual 450Mhz attempting to use the internet, with intermittent problems. I have a 3rd party Realtek wireless card, that I appear to have to keep de-installing and re-installing the OS X Drivers for to get onto the internet. I have broadband through Sky, and an Airport Extreme Base Station. Internet appears to work temporarily through either AEBS or the Sky router (although more problems occur with self assigning the IP address with the Sky router than with the AEBS). When it works I have the following in TCP/IP-
IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Occasionally this info remains the same, advises me I am on the internet, but am unable to open any web browsers. If I refresh the DHCP lease, it either comes up with the same info, or a newly assigned IP address of eg. 169.254.162.94 comes up, and I cannot connect to the internet, and each time I refresh the DHCP lease the same IP address comes up.
Does anyone know why this is happening, I seem to be able to go onto the internet for about 5 minutes before something crashes it.
It all works fine on my other computers, I have recently upgraded to 10.4.11 and have 896MB of RAM.
Any help appreciated, Ian

Okay, let's back-track a little and start removing variables.
"You have the AEBS shut down now, right?" Correct (However when this is turned on, my PC and Powerbook both connect to either wireless network without a problem)
"And the Sky router is up and broadcasting wireless, correct?" Correct
"Are you running a secure wireless network with WEP or WPA authentication?" Running WPA
"Is the G4 in close enough proximity to get good signal from the Sky router?"
It is through in a conservatory about 8 metres away, almost in a direct line from the router with a glass opening door in between. It has always previously worked fine when the router was upstairs and the G4 downstairs. I have also brought it in next to the router and tried wireless and it still has not worked. I have plugged the ethernet cable directly in and we do get internet.
Based on what you're describing, it sounds a lot like the G4 is getting spotty wireless connection and dropping the link. Have you tried just opening System Preferences/Network, making the wireless connection and just watching what happens there? (Yes, now, I have 2 setups, "Automatic" and "Desk" one for manual DHCP assignment and one for Auto using DHCP.
I have sat there, and with the manual IP addresses given installed, I get a green light and it states that it is connected to the internet, but when you try and open a browser it doesn't work. My Auto setup now just consistently defaults to a 192.254.xxx.xxx and now vv.v.v.v.v.v. randomly may it actually connect to a 192.168.xxx.xx IP address and get the browser working, then it will default back to a 254 setup.
When using DHCP routers, it's usually not a good idea to manually assign IP addresses on client machines unless that IP address is reserved in the DHCP server and tied to a particular machine record (MAC address). That said, there are some devices that will only work when they're assigned a reserved address in the DHCP server, and your Realtek card might be one of them. If you're comfortable working in the router DHCP configuration settings, you should be able to add the G4 to the address reservation list if the router can see it.
the above to be honest I would have no idea on how to set up so if you could talk me through it that would be great. I also do not know what the renew lease does and whether this is something I should click on each time.The ther part of the problem I have is I am unable to run a diagnostics check or assistant because I do not have airport running and the setup for the step by step guide isn't geared towards having a 3rd party PCI network wireless card?
Help would be greatly appreciated, because I do not know what to do and cannot afford to replace this machine currently.
Thanks Ian

Adding an External Application that uses J2EE Form Based Security

I'm trying to add an External application that uses the J2EE Form based security. i.e. uses j_username, j_password and posts to j_security_check.
I don't really see how Oracle SSO will support this. The container needs to take control of a clients request and determines when the "Login" page is presented to establish credentials. Posting directly to j_security_check isn't working for me.
I'm using Sybase EAServer 4.12 as the external application.
Is this supported in Oracle SSO?
Do I need to provide a different mechanism for logging user's in?
Also, can someone explain what the benefit would be if I configured the EAServer app as a "Partner" app? I would still have to provide an interface for login. The input would be different but the end result would be the same I guess. What advantages does a Partner app have?
Lastly, is there an NNTP server for these forums?
Thanks.
Darrell

The cure for the symtops described below was to simply add a welcome-file-list
element with appropriate welcome pages to the web.xml descriptor. It makes sense
now that I have worked it out.
Todd
"Todd Gould" <[email protected]> wrote:
>
I have an application comprised of several JSPs that are protected via
Form based
security and enforce an SSL connection via the appropriate declarations
in the
web.xml. This aspect of the application seems to be working with the
exception
of one small quirk.
If a user presses that back button until such time as the receive the
container
provided login page once again, and subsequently provide a valid user
id and password,
they are NOT successfully logged in. Rather, they receive the ugly 403
Forbidden
error that states that the server understood the request, but is refusing
to fufill
it. This only seems to happen given the above course of events involving
the
use of a back button in the browser (or selection of an item from the
history
list). I suspect that this has something to do with the session id being
cached
or something, but I'm not sure? Can anyone offer any assistance on this
one?
Also, does anyone know of a way of preventing the user from bookmarking
this container
provided login page as this also seems to be causing problems for users.
If they
bookmark the first protected page of the application all is fine, but
if they
bookmark the login page they receive the 403 error.
Thanks in advance!

Why is my 8gb ram macbook is slow when using the internet compared to my old laptop?

i just purchased my macbook last week and i've noticed that using the internet has been quite bad at home. It seems to run pretty fast when using my schools wifi however it just doesn't make sense that my old laptop would still run faster than my new 8gb ram macbook. My internet plan is with telstra -50gb ADSL modem and it promises speeds up to 20 mbps and i'm only getting 4.11 mbps...

Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
PHY Mode
Channel
Security
RSSI
Transmit Rate

Internet and applications using the Internet keep crashing after IOS5 upgrade on the iPod Touch 4th generation. Any suggestion on how to solve?

Internet and applications using the Internet keep crashing after IOS5 upgrade on the iPod Touch 4th generation. Any suggestion on how to prevent the it?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I don't have a question so much as a comment for APPLE. I am a new iPhone 5s user and it has many things I like but It is too small and I can only talk on the phone and use the internet if i am in a position to use a wifi connection and that is not good

I am a new iPhone 5s user. I like many of the features it offers. I don't like that I cannot talk and use the internet (if I am away from WI-FI) and this phone is too small. I am actually thinking of returning it and going back to an Android. After all the hassle it took to get all my stuff working on this phone , it may be worth the switch. This phone needs to be able to multitask freely in this day and age. Also Safari is not the best search engine but I could work with it if I could talk and use it at the same time. I use my phone for business and this is a feature that is needed in my line of work.

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

[svn:fx-trunk] 5029: Extending the mxmlc warning to apply to any application that uses a type selector (i.e.

Revision: 5029
Author: [email protected]
Date: 2009-02-20 16:10:37 -0800 (Fri, 20 Feb 2009)
Log Message:
Extending the mxmlc warning to apply to any application that uses a type selector (i.e. not a universal selector) in the subject when the
QE: If we could create a negative test cases for the warning that'd be great.
Doc: Not yet, this will be captured in the Advanced CSS spec.
Checkintests: Pass
mustella: Advanced CSS, Button, MenuBar all Pass
Reviewer: For Paul.
Bugs:
SDK-19272 - [Advanced CSS] Pseudo selectors shouldn't be allowed in mxml components
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19272
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java

Thanks for the crash log It looks like you have AIR 3.2 installed. Could you try updating to 3.3 and generate another log?
http://get.adobe.com/air

I cannot open Photobooth. I keep getting a message that says "Photobooth cannot open because no camera is attached or the camera is in use by another application." As far as I can tell, no other application is using the camera. Help?

I cannot open Photobooth. I keep getting a message that says "Photobooth cannot open because no camera is attached or the camera is in use by another application." As far as I can tell, no other application is using the camera. Help?

Run the apple hardware test.

Closing applications that use the internet to improve Skype convo

Similar Messages

Maybe you are looking for