Closing characteristic after a time period

Dear All,
I am looking for a way to close an inspection charcateristic automatically after a certain time period.
I have 3 characteristics for my inspection lot. The first should be closed 20 hours after generation of the inspection lot. The second 15 hours after that and the third 5 hours after that.
Is there a way to do it?

You can only make automatic UD for inspectoin lots if you meet the other requirements, which I doubt you do. I.e. all required characterisitics have a status of 5 and all of those use a fixed scope. You could make all your characterisitcs optional but that could lead to a whole bunch of non-processed lots. I.e. if the wait period is met, the lots will be closed out. This might be problems if some day the lab falls behind or is gone over a long planned outage. It also runins the ability to indicate to techs the optional vs required characteristics!
FF

Similar Messages

UCCX Call Back After Adjustable Time Period

I have been asked to create a script that allows a person to call in, enter their phone number, and after a certain number of minutes a call back is initiated. I have found the script from the script repository named BaseLineAdvQueuing which has call back builtin, but I am curious how I could create some sort of timer that is adjustable based on caller input to schedule the call back. For example, "enter the number of minutes before you wish to recieve a call back from the system" the person may enter 45 and this would set the ball rolling for the call back a quarter of an hour later.
Any ideas how I could acomplish the timer aspect of this?
Thank you for your input!

This can get complicated, especially if your call center is already complicated. Basically, you are going to need to write records to your database. Have a scheduled task check your database entries for records which need to be processed for callback. Have UCCX initiated via an HTTP Trigger. That script will then place a call to your CSQ script, wait for an Agent, and then connect the Agent to the caller.
Some challenges you might face:
Scripting UCCX for such a solution
DB design and access
Error handling/User experience
Consideration for EWT
Consideration for which CSQ
Reporting
Cisco will not support you on this, so whatever you do, make it as simple as possible while still achieving the goal. You're going to need to support it yourself.
Good luck.

Server 2008 smb idle sessions staying open after 15min time period

The SMB idle session time appears to be set to 15 minutes yet there are sessions open that are 4 days old.
I think that the auto-disconnect timeout is being ignored on the Windows Server 2008r2. Sessions should not be staying idle for days.
Thanks
Steve

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Smart playlist based on play counts within specific time period?

I have tooled all around with the smart playlist options, and this is not a possibility, based on the options iTunes gives you. So I'd like to know if there is a posibility that a script can be written for something like this.
What I want is to be able to create a smart playlist that generates a list of songs that I played a lot during a certain time. For example, if I want to listen to a collection of songs that I had been listening to a lot back in October, I would want an option to do something like this.....
Plays (from [10/01/13] to [10/31/13]) is: (greater than) [12]
Meaning I played it more than 12 times in October alone. Could've played it before that, could've played it after that, but I only want the 13+ October plays to be considered.
Using the options "plays" and "last played" isn't going to work, because that's just gonna eliminate any song that I played again after that time period.
So can a script be written for something like what I'm looking for?
I don't know if it's a posibility because that would mean that iTunes would have to log every single play on a song, and I don't think it does that. I think it erases its memory of the previous play date each time the song is played again.

The last iPod update I had is at least 3 month ago (iPod click wheel, system version 3.1). I am pretty sure that the live update at least those based on play count still did work after that. After updating to iTunes 5 it definitely was gone. I don't know if it is iTunes 5, but this is when I realized it and I did not install anything else for my iPod the last couple of months.
I am pretty sure that it worked before, because I used to listen to audio books that consist of 5 minutes track. The live update helped to avoid listening to the same track twice. I would have recognized the missing live update earlier otherwise.

Get a waveform graph to stop plotting after a given time period

I am doing a research project looking at the effects of modifying visual feedback on a person's current force output. I have a waveform graph that plots the target force level they are trying to match (specified by me) and next to it a second plot showing their current force output (in real time). I am trying to make a condition where the current force output plot (or really the whole waveform graph) stops plotting after a 10 s time period, but can't seem to get it to work. It either plots for the whole trial, or does not plot at all. Is there a way to put a timer on a waveform graph in order to tell it to stop plotting after a specified time period?
Thanks!

Hi again,
I have tried to open the .vi you sent, but I have version 8.2 (yours is in version 8.5) and cannot open it. Is there a way for you to tave the.vi so that it can be opened with earlier versions of the program?
I have attatched my .vi to this message as well.
Attachments:
bimanual combined with metronome_conds.vi ‏174 KB

How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone. I don't want to delete everything just the oldest ones.

How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone. I don't want to delete everything just the oldest ones.

If you update to iOS 8, you can select that in Settings>Messages>Keep Message and then select your option. If you don't update to iOS 8, you'll need to do it manually.

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after and extended period of time please help

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

CLOSED: MAPVIEWER LONG PREPARATION TIME AFTER LONG IDLE TIME

SR # 6896831.994
Customer: NEDGRAPHICS BV
Mapviewer Release: 9.0.4
This issue was posted to the Field Service Forum. They responded with
For Map, we do create the datasource and related maps, themes, styles to be used for Map. The exeuction part is done by Mapviewer and we don't have much control on the mapviewer code on performance tuning point of view.
Please post this question in mapviewer forum
Issue:
After MapViewer being idle for some time (+/- 60 minutes) it takes a long time to generate the first map image --> 5 minutes.
In the MapViewer logfile with log-level=finest, I see that there is a very long preparation time.
After producing the first map image the next (same!) image is produced very fast.
What could be the reason?
What does MapViewer do during "preparation"?
Customer statement:
I am a very experienced Oracle specialist and a very experienced MapViewer developer.
Could you please pass on my request to the MapViewer developers?
I have to know what is going on during preparation time.
Is there a possibility to get more detailed logging of the preparation time?
SEE log file at:
http://workbench.oraclecorp.com/cgi-bin/tools/its_reltar?tar=6896831.994
FILE: mapviewer_37.log
Additional customer info.
UPDATE from customer
================
The first time after long idle time it takes between 100 and 300 seconds.
After that it takes less than 2 seconds.
Can it be a dabase connection issue?
Will it make a difference if I use a database connection via data-sources.xml
instead of a direct data-source in mapviewerConfig.xml?
This is what I mean :
Method 1:
<map_data_source name="NBG"
jdbc_host="plutonium"
jdbc_sid="ods"
jdbc_port="1521"
jdbc_user="nbgex"
jdbc_password="ELvaJ7axzKQl0aKtjikuKT7JUFTjukU3"
jdbc_mode="thin"
number_of_mappers="3"
/>
Method 2:
<map_data_source name="NBG"
container_ds="jdbc/NBG"
number_of_mappers="3"
/>
data-sources.xml:
<data-source
class="oracle.jdbc.pool.OracleDataSource"
name="NBG"
location="jdbc/OracleCache"
ejb-location="jdbc/NBG"
xa-location="jdbc/xa/OracleXADS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="nbgex"
password="nbgex
url="jdbc:oracle:thin:@plutonium:1521:ods"
inactivity-timeout="30">
<property name="connectionCacheName" value="ICC"/>
<property name="connectionCachingEnabled" value="true"/>
<property name="fastConnectionFailoverEnabled" value="true"/>
</data-source>
Thanks
Message was edited by:
user639281

RESPONSE from customer
====================
The database is restarted once a day in the morning. That could explain the problems in the morning. But there are also problems during day time after some hours of idle time when the database in not restarted.
After testing we noticed that we don't have the problem if we use database connection through OC4J (data-sources.xml).
If we use that method every database connection is cleaned up if it is not used for 15 seconds or so.
If we use the other method (database connection in mapviewerconfig.xml) then the database connection is open for a long time and then we have the problem with the long preparation time.
This problem only occurs in a DMZ environment. MapViewer is installed on a DMZ server and connects through the firewall with a intranet database.
Is it possible that the firewall software prevents communication of an open database connection after a long period of idle time?
Thanls.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Automatic update value after time period passes

Hi,
In my application on page 8 I have an item which value is to be changed from one value to another depending on a time period. At first the item has value 1. Then we set it on value 2 and we also set a time period, for example 5 days. So after that period the value should automatically change on the value 1.
On page 1 there is a region with a list entries, subjects which have the value 2 set. I want this list to change according the change of value.
Does anyone know how to do this? I am a bit clueless...
Thanks
Regards,
Leila

There appears to be logical issue here.
a) The value will be incremented only when user visits the Page 8 . If user does not visit Page 8 then the change will not occur
b) If the user visits Page 8 but does not save the change (commit) even then the change would not come into effect.
Can this not be handled through a scheduled job that runs on the underlying tables at per-determined intervals/time? Say , once a day?
If the above 2 points do not affect you then you can try the Process route.
i) Write a OnLoad Before Header or After header process on Page 8
ii) In this process find out whether the required/preset interval has elapsed on not
iii) If the criteria is met then change the value of the Page 8 as well as Page 1 items using bind variable sysntax in the Process
:P12_ITEM := '2' ; -- or whatever you want.
:P1_ITEM := :P12_ITEM;How to figure out the interval? If it is date/time based then use SYSDATE. If it is something else , you need to figure out the interval calculation that works for you.
Regards,

Life time of SSD and alternative after time period

Please clerify me the life time of SSD and HDD in term of calculation with respect to use and time period?
Clarify me, If my SSD drive get inoperable after warrenty period than alternative to make situation nomal. If SSD of notebook became inoperable than my OS and other installed s/w will be operable or not?

Hi Brad
I can copy the code from routine #1 into my routine #911 inorder to restirct the display of output type in delivery header. But as mentioned by you this routine is not triggered at the time of PGI. ( I checked at the time of PGI )
If i link my output type LD00 with Requirement #1 routine then it will be triggered at the time of PGI, but here the o/p is linked with Requirement #911.
Pls let me know if any thing wrong i mentioned...

My final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

What version of FCP X are you using?
What is the full spec of your Mac?
What codec (file format) of video are you working with.
Andy

Unable to stay connected to my iTunes library. After a short period of time I get a message to turn on home sharing. Home sharing is on?

Unable to stay connected to my iTunes library. After a short period of time I get a message to turn on home sharing. Home sharing is on?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

TS1702 all of my apps on my ipod touch dont respond or will close themselves after a short period of time. ive had my ipod touch for less than a year. what can i do to fix this problem?

all of the apps on my ipod touch dont respond, or will stop working after a short period of time. ive had my ipod for less than a year and this has been a reaccuring issue for a while. what can i do to fix this problem?

Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, try a restore from an earlier backup in iTunes.
iTunes: Backing up, updating, and restoring iOS software
And lastly, restore to factory defaults in necessary.
B-rock

Can I make PDFs expire after a specified period of time?

I found some older articles elsewhere, but they are fairly dated.
Is it still possible to generate, created etc. PDF's and specify a time period that it would then expire?
SO PDF1 is set to expire in 1month, PDF2 is set to expire in 6 weeks etc.
Thanks for the help.

Hi boldycreative,
I believe you can do that using some JavaScript, as outlined on this page: Basic Document Level (Document Open) Scripts.
But, it can be easily disabled by somebody who knows JavaScript.
Best,
Sara

Closing characteristic after a time period

Similar Messages

Maybe you are looking for