Closing Entry Run without "Revaluation of Consumption Checkbox"

Hi gurus,
I have a very important problem and I need to close the period as soon as possible.
I did closing entry run for an individual material without the Revaluation of Consumption checkbox. CO object revaluation is active for the consumption alternatives (Both for CO and FI revaluation). We see normal postings (with checbox filled) with profitability (CO-PA) object. 
What are the postings that ML did in both FI side and CO side. When I looked at the posting price differences are distributed for each single profitability(CO-PA) object in CKM3 view. Also related amount sent to ending inventory (both in CKM3 view and with FI stock account postings).
Under this conditions, COGS account are posted still with standard price rather then actual price. Am I right. So, for the correct result, should we post the related amount (actual - std price difference X sold amount) to the COGS account?
On the other hand, how will be the CO-PA posting at the end of the period. As you know the actual prices are taken from ML and COGS accounts are posted with standard prices. Therefore, CO-PA COGS amount will not be actual amount. Am I right.
Thanks in advance.
Ahmet

Hi,
I mean system has two different kind of postings, one of that is FI posting (legal) and the other is CO posting with cost elements (statistical like cost allocations). I run the step Consumption revaluation in CKMLCP and price differences distributed in CKM3 view. But as you know that actual postings are done in the closing entry step and I do not check the box of revaluate consumption in the closing entry parameters, actually price differences are not posted to consumptions rather CKM3 view changed.
Therefore, COGS account posted with srtandart prices rather than actual prices because we did not checked the "revaluate consumption box". In order to fix the situation (actual-standart differences) should we post the related price difference amount to the COGS account.
Ahmet

Similar Messages

  • How to reverse material ledger closing entries beyond  previous period?

    In a test system, the system does not permit reverse material ledger closing entries. The current period is 04/2008.
    Getting a message C+716 message
    You want to cancel closing entries in valuation area XXXX for period 008 in fiscal year 2007.
    You are allowed to cancel closing entries only in the previous period. Reversing closing entries for periods before the previous period is not possible.
    There are provision to run closing entries like  MUST_SETTLE in the ok code features, Are there,any such for reversal? Could there be any work-around?

    Hi David
    If you dont need to perform the close itself but would just like to get the periods in the correct status you can use the process outlined in note 645083.
    In the material ledger, it may be necessary for different reasons to manually set the period status of materials in former periods to 70 ("Closing Entry Completed") without actually carrying out the closing entry.
    It provides program Z_ML_SET_PP_STATUS_70 that will allow a manual update to the prior period status.
    There is a pre-requisite regarding revaluation amounts, but this is all described in the notes.
    /Elaine

  • TS1717 data executiion prevention keeps closing my itunes,but itunes wont run without it.help !

    data execution protection keeps closing my itunes on my sony vaio.also get the messge c:\windows\system32softpub.dll.tried turning of the DEP but itunes wont run without it.no problems with any other programs.any thoughts

    Taken at face value, you're having trouble with a Windows operating system file there.
    Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

  • CKMLCP closing entry still open items

    Hi Gurus,
    Firstly we have WIPs.
    In the closing entry step we have 24 still open materials. We got the error message m8 147 "the account determination for key <chart of account name> PRM 1100  is not maintained " . I have checked the PRM acc assignment in OBYC and there is an account assignment.
    The system gives error message f5 846 also "the debit/credit indicator inconsistent".
    The number of material in ML document is 1 in the parameters. In addition all three paramaters (revaluations etc) are selected.
    I have nothing to do without opening OSS message. Here is the last chance before that. As you know we have to close the period in a few days.
    Thanks in advance for your valuable replies.
    Ahmet

    Hi,
    The problem of F5846 in CKMLCP is mostly caused by the wrong customizing 
    of account determination in OBYC. The debit or credit posting key is     
    NOT defined or incorrectly defined.                                                                               
    If message M8147 is also issued in the log, you can find which           
    transaction has problem,i.e. WPA                                                                               
    The missing entries for the posting keys can be displayed via tables     
    T030B and T030R. The posting keys can be defined in OBYC. Please         
    check the settings in OBYC according to the long text of the messages    
    in the log.                                                              
    To eliminate the problem you should maintain transaction OBYC            
    accordingly.                                                                               
    You should also maintain debit/credit indicators for posting keys.       
    Please read the sap note 1077957 for more information about this error.                                                                               
    1077957    Error message M8 147 when you make a closing entry                                                                               
    Please also check the note 908737 which provides further clarifications  
    on how the system works in step 'Post closing' in transaction CKMLCP.                                                                               
    I hope this information clarifies better the situation.                                                                               
    Best regards,                                                            
    MLM

  • Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

    Hi,
    I am using APEX version 4.2.1.00.08 with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    I've developed an application, that was working fine till 3 days ago...
    At the moment, I can log into the application but when I enter my ID/PW it takes me to my 1st page but then it runs for a mint or so (trying to load charts) and then generates following error message
    No data received
    Unable to load the webpage because the server sent no data.
    Here are some suggestions:
    Reload this webpage later.
    Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
    interestingly, I haven't changed anything within the application
    I've tried it with Chrome Version 27.0.1453.116 m and IE 8.0...
    with IE 8.0, it shows I/O Error in place of my graphs and get's a pop up message that displays "Error - error unknown"
    The only thing that I can recall doing differently is logging via remote desktop connection, but I've used remote desktop in the past as well and it worked.
    Please advice

    anyone...?

  • Post closing entry in Material Ledger

    During running og Material ledger last night, in CKMLCP, we ran post closing entry before we release the cost through CKME. When I tried to release tcode CKME and CK40N, the system gave error message as below:
    Price changes for material 200001  is not possible
    Message no. C+811
    Diagnosis
    You want to change the price or release planned prices for material 200001 with valuation type  in valuation area 2100. You have, however, already entered actual data or performed a single-level price determination in the period concerned. The status of the material in the period is Quantities and Values Entered.
    Price determination indicator 3 assumes that the standard price remains constant throughout the period, so that all movements can be valuated preliminarily with the same standard price.  Therefore, you can only change the standard price at the beginning of a period (i.e. as long as no actual data was entered).
    System Response
    The system does not allow the price changes or the release of planned prices for this material in this period.
    Procedure for System Administration
    In the future, to automatically release your planned prices upon creation of new actual data you can allow dynamic price release in Customizing for Actual Costing/Material Ledger.
    How I can release my standard cost for period 01.05.2010 to 31.05.2010. Please help
    Edited by: Ahmed EL Zain on May 1, 2010 10:49 AM

    Hey,
    What you described is the standard system behaviour.
    The price change or release of a cost estimate should always be the
    first transaction in a new period, when Material Ledger is active.
    Once period status = 30, the standard price cannot be release or
    changed. For more details please see note 190707.
    The only possible workarounds are as below:
    - postponing the costing release to next month
    - reversing transactions and usage of note 574930
    - using the option LTPC from note 555176
    Best Regards
    Young

  • Material Ledger Closing Entry Missing

    Dear Experts,
    WE have implemented material ledger for Actual Costing.  During the material ledger activities (CKMLCP)for the month of March, system showed an error message that "Clsoging entries are not posted for Previous Month" and proces of march was also terminated.  AS the Material period for February and March are closed, the way out for closing of material ledger for the month of April without error (after posting the closing entries for March) may please be informed. 
    Thanking You
    with regards
    Muraleedharan MK

    Hi MK,
    ML is very rigid.. you have to complete the steps every month.. other wise ML documents have impact ...
    You have to open previous period and get it done.. no way out..
    Regards
    Sarada

  • Material Ledger - Error in closing entry

    Hi Gurus,
    We have an issue running the Post Closing entry of CKMLCP.
    The system shows the error M8 147 (Account determination for entry &  not possible) for one material, the only one pending material of the costing run.
    We checked the material master and the problem was the valuation category. This was modified by the correct valuation category (with correct account determination in the OBYC) in the material master, but the system still shows the error message M8 147 refering the old valuation category.
    Any suggestion???
    Thanks in advance!!!!

    Hi,
    Thanks for the response.
    The problem is that, for this material, the costing run shows now the correct valuation category ZE11 in the costing run result (but in pending status for the material), but the log shows the error message refering the old valuation category ZE09.
    The obyc must not to be mantained because, for the valuation category ZE09, only operation PRY should be possible (this has the correct account determination), not operation PRV. The error refers old valuation category ZE09, operation PRV.
    Thanks!

  • Error in material ledger closing entry (message number KE396)

    Hi friend
    i met a problem in material ledger closing entry ,the message number is KE396
    after checked some transaction data and master data ,i find that some one change the division in material master during the period and change back to the the old division during the period ,the division is one of the characteristic in copa ,System will check the derivation via material master when we run the material ledger closing,so it went error and said the Inconsistency between a document field and the prof. segment number
    Then i use KE26 to repost the COPA line item ,but it also went error when i run the material ledger closing entry
    can you tell me how to solve this issue
    thanks

    Hi,
    Please raise an OSS message as this is a program error.
    Momentarily you can try the following:
    1. Do not select option "Set CO Account Assignment" in Post Closing.
    2. If the above action does not resolve the error, then force close the material and then run the Post Closing. Surely this is not an ideal situation and must be adopted if there are only very few materials.
    Regards
    Satya

  • MRP run without one storage location

    Dear All,
    My client's requirement is they need to run MRP on plant level without considering one storage location stock
    e.g if a material is having stock of 10 in unrestricted with storage location 1104. Now when mrp is run for 100 quantity planned order is created for 90 only planning strategy is 40....they want the MRP should not consider the stock in storage location 1104.....how this can be made possibe?
    Please Suggest...
    Regards,
    Pawan Shetty

    Dear all,
    Pl. help me which user exit implemented  for MRP RUN without Storage location ,b'coz. from slandered setting we are not able to  do the same
    Regards
    Sandeep

  • REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

    Hi everyone.
    Can anyone tell me what is wrong in this code below?
    Code:
    function NO_DAYSFormula return Number is
    begin
      IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
      AND :P_TO_DT<:MATURITY_DATE
      AND :ACCT_OPN_DT>:P_FR_DT
      THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
      ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
      AND :P_TO_DT<:MATURITY_DATE
      AND :ACCT_OPN_DT<:P_FR_DT
      THEN RETURN (:P_FR_DT-:P_TO_DT+1);
      ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
       AND :P_TO_DT>:MATURITY_DATE
       AND :ACCT_OPN_DT<:P_FR_DT
      THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
      END IF;
    END;
    It gets compiled successfully but when i run the report, i get 2 errors.
    Error 1:
    REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
    ora-06503: PL/SQL : Function returned without value.
    Error 2:
    REP-0619: You cannot run without a layout.
    Should i use only 1 return statement?
    Can i use as many return statements as i want?
    What is the exact mistake? Please let me know.
    Thank You.

    Let me clear you the first thing...
    If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
    REP-0619: You cannot run without a layout.
    So you just correct the function 'no_daysformula' .
    First of all you run the report without that formula column.
    If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
    As function will always return a single value, Check your formula 'no_daysformula' returns the same.
    declare a return variable say for example..
    DECLARE
    V_DATE DATE;
    BEGIN
    --YOUR CODE---
    RETURN V_DATE := (RETURN VALUE)
    END;
    Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
    If any Problem persists let me know
    Regards,
    Soofi.

  • Error when run without admin rights

    I created a program that need to be run on a companies computers, the people who will run it can't have admin rights, however, if the program is run without admin rights all it does is create an error txt file, with the following:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x03109c30, pid=3852, tid=3896
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_08-b03 mixed mode, sharing)
    # Problematic frame:
    # C [GrFinger.dll+0x79c30]
    --------------- T H R E A D ---------------
    Current thread (0x00a6fdc0): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
    siginfo: ExceptionCode=0xc0000005, writing address 0x00000004
    Registers:
    EAX=0x03114a90, EBX=0x00000003, ECX=0x00000000, EDX=0x00000000
    ESP=0x02faf7c8, EBP=0x02faf82c, ESI=0x058c9ac0, EDI=0x058b0bb0
    EIP=0x03109c30, EFLAGS=0x00010206
    Top of Stack: (sp=0x02faf7c8)
    0x02faf7c8: 0309515b 058b0bdc 030941fb 058b0bb0
    0x02faf7d8: 00a6fdc0 26acc138 058b0bb0 02fafb64
    0x02faf7e8: 0310b658 00000000 030939e8 26acc138
    0x02faf7f8: 03093e61 00000001 10001236 00a7832f
    0x02faf808: 00a6fe80 02faf83c 02faf810 26acc138
    0x02faf818: 02faf83c 26acd468 00000000 26acc138
    0x02faf828: 02faf83c 02faf85c 00a72a8f 00000000
    0x02faf838: 00a76509 22a76ed8 02faf840 26aca43b
    Instructions: (pc=0x03109c30)
    0x03109c20: 8b 41 08 50 ff 15 90 d0 10 03 c3 cc cc cc cc cc
    0x03109c30: c6 41 04 01 c3 cc cc cc cc cc cc cc cc cc cc cc
    Stack: [0x02f70000,0x02fb0000), sp=0x02faf7c8, free space=253k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [GrFinger.dll+0x79c30]
    j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
    j salvationarmy.TemplateList.setup()V+198
    j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
    j salvationarmy.LoginProgram.<init>()V+87
    j salvationarmy.LoginProgram$20.run()V+4
    j java.awt.event.InvocationEvent.dispatch()V+47
    j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
    j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
    j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
    j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
    j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
    j java.awt.EventDispatchThread.run()V+9
    v ~StubRoutines::call_stub
    V [jvm.dll+0x86e84]
    V [jvm.dll+0xddead]
    V [jvm.dll+0x86d55]
    V [jvm.dll+0x86ab2]
    V [jvm.dll+0xa16b2]
    V [jvm.dll+0x10f4ac]
    V [jvm.dll+0x10f47a]
    C [MSVCRT.dll+0x2a3b0]
    C [kernel32.dll+0xb683]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j com.griaule.grFinger.GrFingerNative.GrCapFinalize_native()I+0
    j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
    j salvationarmy.TemplateList.setup()V+198
    j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
    j salvationarmy.LoginProgram.<init>()V+87
    j salvationarmy.LoginProgram$20.run()V+4
    j java.awt.event.InvocationEvent.dispatch()V+47
    j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
    j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
    j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
    j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
    j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
    j java.awt.EventDispatchThread.run()V+9
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x02cb9850 JavaThread "Thread-3" [_thread_in_native, id=3916]
    0x02c48748 JavaThread "Timer-0" [_thread_blocked, id=3908]
    0x02c41d98 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3912]
    0x00355ed0 JavaThread "DestroyJavaVM" [_thread_blocked, id=3836]
    =>0x00a6fdc0 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
    0x00a6e9b8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3892]
    0x00a6e4c8 JavaThread "AWT-Shutdown" [_thread_blocked, id=3888]
    0x00a0b048 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3884]
    0x00a09cc0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3876]
    0x00a08f78 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3872]
    0x00a03ff8 JavaThread "Finalizer" daemon [_thread_blocked, id=3864]
    0x0035fb30 JavaThread "Reference Handler" daemon [_thread_blocked, id=3868]
    Other Threads:
    0x009d8a08 VMThread [id=3856]
    0x00a0c390 WatcherThread [id=3880]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 576K, used 323K [0x22a70000, 0x22b10000, 0x22f50000)
    eden space 512K, 50% used [0x22a70000, 0x22ab0f08, 0x22af0000)
    from space 64K, 99% used [0x22b00000, 0x22b0fff8, 0x22b10000)
    to space 64K, 0% used [0x22af0000, 0x22af0000, 0x22b00000)
    tenured generation total 1408K, used 836K [0x22f50000, 0x230b0000, 0x26a70000)
    the space 1408K, 59% used [0x22f50000, 0x23021100, 0x23021200, 0x230b0000)
    compacting perm gen total 8192K, used 821K [0x26a70000, 0x27270000, 0x2aa70000)
    the space 8192K, 10% used [0x26a70000, 0x26b3d748, 0x26b3d800, 0x27270000)
    ro space 8192K, 63% used [0x2aa70000, 0x2af7d608, 0x2af7d800, 0x2b270000)
    rw space 12288K, 46% used [0x2b270000, 0x2b810608, 0x2b810800, 0x2be70000)
    Dynamic libraries:
    0x00400000 - 0x0040d000      C:\Program Files\Java\jre1.5.0_08\bin\javaw.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
    0x6d6c0000 - 0x6d85b000      C:\Program Files\Java\jre1.5.0_08\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d280000 - 0x6d288000      C:\Program Files\Java\jre1.5.0_08\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d690000 - 0x6d69c000      C:\Program Files\Java\jre1.5.0_08\bin\verify.dll
    0x6d300000 - 0x6d31d000      C:\Program Files\Java\jre1.5.0_08\bin\java.dll
    0x6d6b0000 - 0x6d6bf000      C:\Program Files\Java\jre1.5.0_08\bin\zip.dll
    0x6d000000 - 0x6d169000      C:\Program Files\Java\jre1.5.0_08\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x6d240000 - 0x6d27f000      C:\Program Files\Java\jre1.5.0_08\bin\fontmanager.dll
    0x7c9c0000 - 0x7d1d5000      C:\WINDOWS\system32\shell32.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
    0x5d090000 - 0x5d127000      C:\WINDOWS\system32\comctl32.dll
    0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_08\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_08\bin\nio.dll
    0x10000000 - 0x1000e000      C:\Program Files\Griaule\GrFinger 4.1 FREE\bin\GrFingerJava.dll
    0x03090000 - 0x03697000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\GrFinger.dll
    0x76780000 - 0x76789000      C:\WINDOWS\system32\SHFOLDER.dll
    0x036a0000 - 0x036bd000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFpFns.dll
    0x036c0000 - 0x036ca000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevDat.dll
    0x036d0000 - 0x036f6000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevClt.dll
    0x77120000 - 0x771ac000      C:\WINDOWS\system32\OLEAUT32.dll
    0x03700000 - 0x03775000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFtrEx.dll
    0x03780000 - 0x037de000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpMatch.dll
    0x03810000 - 0x03917000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\BioNetAcsDLL.dll
    0x03920000 - 0x0396d000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\USB4XX.DLL
    0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
    0x77920000 - 0x77a13000      C:\WINDOWS\system32\SETUPAPI.dll
    0x037e0000 - 0x037f5000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\pthreadVC2.dll
    0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
    0x6d370000 - 0x6d37d000      C:\Program Files\Java\jre1.5.0_08\bin\JdbcOdbc.dll
    0x74320000 - 0x7435d000      C:\WINDOWS\system32\ODBC32.dll
    0x763b0000 - 0x763f9000      C:\WINDOWS\system32\comdlg32.dll
    0x20000000 - 0x20017000      C:\WINDOWS\system32\odbcint.dll
    0x4dd40000 - 0x4dd84000      C:\WINDOWS\system32\odbcjt32.dll
    0x1b000000 - 0x1b170000      C:\WINDOWS\system32\msjet40.dll
    0x1b5d0000 - 0x1b665000      C:\WINDOWS\system32\mswstr10.dll
    0x5d130000 - 0x5d13e000      C:\WINDOWS\system32\odbcji32.dll
    0x1b2c0000 - 0x1b2cd000      C:\WINDOWS\system32\msjter40.dll
    0x1b2d0000 - 0x1b2f6000      C:\WINDOWS\system32\MSJINT40.DLL
    0x5fe80000 - 0x5fe9b000      C:\WINDOWS\system32\odbccp32.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x76fd0000 - 0x7704f000      C:\WINDOWS\system32\CLBCATQ.DLL
    0x77050000 - 0x77115000      C:\WINDOWS\system32\COMRes.dll
    0x1b810000 - 0x1b84a000      C:\WINDOWS\system32\msjtes40.dll
    0x0f9a0000 - 0x0f9ab000      C:\WINDOWS\system32\VBAJET32.DLL
    0x0f9c0000 - 0x0fa22000      C:\WINDOWS\system32\expsrv.dll
    0x0cd90000 - 0x0cda1000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\fplib.dll
    0x76c30000 - 0x76c5e000      C:\WINDOWS\system32\WINTRUST.dll
    0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    0x76c90000 - 0x76cb8000      C:\WINDOWS\system32\IMAGEHLP.dll
    0x0cec0000 - 0x0ceed000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\extdllR.dll
    0x0d000000 - 0x0d03a000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\vrfdllR.dll
    VM Arguments:
    java_command: C:\Community Center\SalvationArmy.jar
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\Griaule\GRFING~1.1FR\bin
    USERNAME=mackd
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 2 (cores per cpu 1, threads per core 2) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ht
    Memory: 4k page, physical 514792k(227580k free), swap 1255496k(937260k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0_08-b03) for windows-x86, built on Jul 26 2006 01:10:50 by "java_re" with MS VC++ 6.0
    Help!
    GrFinger is an SDK put out by Grauile (or something like that) just seach grfinger in google, you'll find it.
    Thanks

    Don't you think you should really contact Grauile ?
    They wrote the software, including the native DLL libraries, and probably encountered this problem before on dual processor machines.

  • How do I build an application that will run without being installed?

    I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
    Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
    Thanks

    Under what operating system was it running under back in the 90's when it was working?
    I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
    Just some food for thought, do not know if it applies to your situation.
    Good Luck
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Automatic Payment run without Bank Ranking order

    Dear Experts,
    I want to excute the Automatic Payment run without assigning the Bank ranking order in OBVCU, means that when I run the APP it should pay from the House Bank entered in the Vendor master data under the Automatic payment transactions. In my case House Bank is the Bank Account.
    Details of the data in Vendor master are;
    Payment methods: C
    House Bank:   Given
    Details of BVCU are;
    Ranking Order: Not entered
    Bank Accounts: Entered
    Available Amounts: Entered
    When I execute the APP, it puts the payment in exception list in the proposal.
    Any help will be much appreciated, thanks.

    Hi
    As per my understaning there will be no impact . Vendor Master data always have priority.
    so maintain ranking order and vendor master also woth aprropriate House Bank and Account ID
    Thanks
    Manoj J

  • How can i copy a dbx executable to other machine to run without installion

    How can i copy a dbx executable to other machine to run without installion whole workshop
    packet??? how to generate a configuration for dbx alone???
    thanks

    Hi, thanks for you help.
    actually, I have once copied dbx to other machine. certainlly, it needs a license. But when I copied
    a license file from the directory /opt/SUNWspro/license-dir/ of machine that installed Workshop
    to another machine that i want to run dbx. dbx starts correctly. but when i type
    $ dbx ipCentrex
    it prints following message:
    dbx: warning: cannot find global initialization file: dbxrc
    /opt/wacos/./.dbxrc[1]: syntax error
    dbx: installation problem, can't find help file: ./SUNW_SPRO_Dbx_help.info
    _find_executable: not found
    To suppress this message, add the following line to your .dbxrc file:
    dbxenv suppress_startup_message 6.2
    Reading ipCentrex
    dbx: warning: setuid program exec()ed. Reattaching
    There might be too many LWP's in this process.
    See `help dbxenv' under mt_scalable.
    dbx: Cannot open lwpstatus.
    dbx: warning: process initialization failed
    dbx: warning: can't find file "/opt/wacos/server/feature_server/bin/obj/ipCentre
    x/ipcentrex_main.o"
    dbx: warning: see `help finding-files'
    when it says that has errors in .dbxrc file, I can remove this file. But the critical error is why it says
    too mamy LWP's in this process? when I debug it at a machine that installed workshop, this error not occurs.
    anyone have answer?

Maybe you are looking for