Closing multiple sequences that are open at once.

I usually have quite a few sequences open at once....I usually close them by selecting each one, right clickign and selecting close...please tell me if there is a way of lcoing all of them at once...even if I close the timeline and re open they are still all there....restarting the fcp and openign the project again.....still there!!!! HELP!! :o

Cool...
Also, that control+W applies to projects too... ie- if you select the browser and have many open projects, tapping control+W will close them.
Also... when you are on the desktop and have many open 'Finder windows', or using safari and have many open Safari pages, tapping command(apple)+W will close them...

Similar Messages

Sarari is not functioning properly I cannot close multiple windows that are open.

I cannot shut windows on Safari. Foxfire and chrome are usable but how can I close windows on Satari?

Wylde,
You don't mention the device, or operating system you're using, so I don't know if this will apply to you or not.
I had this problem a few times during the time I've owned my i MAC.
If you haven't already used force quit, give it a try. You probably already know that Force Quit is available when you click on the Apple Icon at the upper left hand corner of your screen. It's probably a good idea to reboot afterwards.

My screen continually freezes up. I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
You can read about restoring the software here.
iTunes: Restoring iOS software - Support - Apple
Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
You should read this first before you restore from either backup.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
This is a must read before you erase the iPad should you decide to go that route.
iOS: Understanding 'Erase All Content and Settings' - Support - Apple

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

TS1702 I have just updated the op system on my phone, it now won't let me close down any apps that are open in the background, any ideas?

I have just updated the op system on my phone, it now won't let me close down any apps that are open in the background, any ideas?

Double-click the Home button to bring up the app screen, then swipe upwards on the app.
http://howto.cnet.com/8301-11310_39-57602601-285/how-to-force-close-apps-on-ios- 7/
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.

HT201365 How do you close your apps that are open

How can I close the apps that are open

Ive got a fix
Dubble click your home button and swipe the picture of the application up and not the icon
soo
Dubble click your home button ---> Find app you want to close --> Swipe up on picture of application
and it should be closed
Hows the batterylife like on your phone?

I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?

I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?

Make sure there's enough free space on the startup disk to install software updates...
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides

How to avoid purchasing multiple things that are the same but different titles

How can I avoid purchasing multiple things that are the same but have multiple names but is the same purchase for the same use?

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

Is there a way to slide up to reveal apps that are open instead of double clicking?

Is there a way to slide up to reveal apps that are open instead of double clicking?

Only on the iPad.

Query For PO's that are open (no receipt yet in the system)

Hi All,
I want to frame a query for PO’s that are open i.e. no receipt yet in the system. Also PO’s must be for Inventory Items.
Can anyone please help me with this.
Regards,
Shruti

Look at those records in po_lines_all where item_id is not null. And then look at the quantity and quantity_received fields.
Hope this helps,
Sandeep Gandhi

How do I delete multiple photos that are stored on my IPAD imported folder? I have a first generation IPad

How do I delete multiple photos that are stored on my IPAD imported folder? I have a first generation IPad

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Why don't tabs that are open on my iPhone appear in Show All Tabs on my MacBook Air?

When I select Show All Tabs in Safari 8.0.3 on an early 2014 MacBook Air, I see the tabs that are open on my iPad but not those that are open on my iPhone 6. I recently updated the phone to iOS 8.2. All my devices are connected to my iCloud account and Safari is checked in my iCloud settings on the phone. So I don't understand why the phone's open tabs no longer appear in Show All Tabs on the MacBook Air. The iPad is an iPad 2 and it's still running iOS 8.1.3. Am I right in guessing there's a problem with the iOS 8.2 update?

Hi califgrl,
If you are having issues using iCloud Tabs on your iPhone, you may find the information and troubleshooting steps outlined in the following articles helpful:
Set up and use iCloud Tabs - Apple Support
Get help using iCloud Tabs - Apple Support
Regards,
- Brenden

How can I silently print all PDF documents that are opened automatically?

For a special terminal PC I want to print all PDF's that are opened to be printed automatically and without user interaction. The PDF is loaded in an iFrame in the browser, this PDF then needs to be printed.
I don't want to modify the PDF's, the PDF's are supplied by another resource.
I was thinking about using a folder level script that prints each PDF document automatically as soon as it is opened, but I don't know how to accomplish this.

Macropanther wrote:
I don't think the installation process will allow that unless the printer is connected.
Incorrect. Win or Mac, you can install a printer driver w/o the printer being connected.
I have tried MS PowerPoint (which can't seem to accept paper wider than 56 inches) and have used NeoOffice Draw
You're using the wrong tools. PP shouldn't even be in consideration; I don't know about NeoOffice, but I tried its cousin LibreOffice, and it has issues with custom paper sizes; which is not surprising, given what these apps were designed for.
What you need for actual banners (not web page banners) is a vector drawing tool or a DTP app. I'd say Illustrator or InDesign, but Adobe CS is expensive, and, if you're thinking of PowerPoint for this job, you're not ready for it.
You can try Pages; although not quite DTP, it can do the job and it's inexpensive. There are other options, such as Swift Publisher (a DTP app) or Intaglio (a drawing app) -- both are more expensive than Pages, but still affordable; or you can go open source with Scribus (DTP) or InkScape (vector; requires X11). You already know the ups and downs of using open source. (These are just examples; you can find others if you look for them.)
Although it's better to have Kinko's printer driver, to make sure of the correct options, you don't actually need it to print to PDF. You should be able to define a custom page size (eg, 12in × 72in) and create the PDF from it. Any app which uses the Mac OS X standard print function should be able to do it.

I have connected my laptop to a separate monitor but it is only bringing up the background, not the programs that are open. Help?

I have connected my laptop to a separate monitor but it is only bringing up the background image, not the programs that are open. Help? I assume there is a simple solution. Thank you in advance.

That's called extended desktop mode. You can think of it as an extension of your main screen probably off to the right. Drag an app off the screen to the right and it will appear on the second monitor. You can see and adjust placement of the second monitor in System Preferences > Displays > arrangement tab. Drag the second screen around for your optimum placement. Also the little bar can be moved to either screen and that determines which screen will contain the dock/menubar.
Also you can toggle between Mirror and extend desktop mode by pressing CMD F1.
Regards,
Captfred

Closing multiple sequences that are open at once.

Similar Messages

Maybe you are looking for