Closing of old internal order with costs
Hello,
we have an old internal order in the system that has to be closed.
Due to rounding differences / currency conversions there are still costs (balance 0,01) on the order.
Therefore the order cannot be closed and settlement is not possible as the postings are out of rather old periods and the settlement structures and master data do not fit anymore.
Is there a possibility to close the order? A special report or something?
Technically it is closed (TABG) but we need to set the status BABS.
Thank you for any help & regards
Britta
Hello,
unfortunately the posting that causes the balance is out of the year 2009.
I changed the settlement rule to "GES" and to a cost center but the system does not want to do the settlement.
The error says that I have to do the settlement in 2009.
Thanx for your help,
Britta
Similar Messages
-
Defaulting to Internal Orders to Cost Assignment?
The SRM application is currently defaulting to Internal Orders for Cost Assignment. This is despite the fact that in the configuration, we have removed Internal Orders as active.
Any help with this will be gratly appreciated
Cheers
BrentRobin
When I make this change and then try to raise a order through the catalog. the connection between the catalog times out. Seems to be looking for somthing? any idea.
Thanks for your help so far
Brent -
Create internal order with reference - Do not copy distribution rule group
Hi,
I'm creating an internal order with reference to another order through tcode KO01. When i will display the new internal order, i already have distribuion rule group that was copied from the reference order. To delete the incorrect distribution rule group i execute tcode KO02, however this information do not appear in tcode KO02.
What should be done to delete this settlement rule? I do not want to copy the settlement rules from the old internal order.
Thanks in advance.
Regards,
Ana FernandesHi.
'What should be done in order to do not copy this information when i create the internal order with reference?'
in tcode kot2_opa do not maintain Settlement profile for Order category 3
Also go to KOM2 and delete Settlement rule for order, from which you copying.
'in table COBRB i can see the information however i can not delete it. The validy period is empty.'-in su53 check authority -
I have a real internal order with a budget.
In case I create the settlement of the internal order by period end- how this will impact from the budget point of view
(I am steeling the cost with the original account to a cost center).
I mean to say- will the system refer the settlement as a deduction in cost - so i will have more available budget- this is a scenario I am not interested in.
How can i solved this conflict (in case this conflict is in place).Hi
If you are settling to a Budget controlled object i.e. the receiver also has a budget on it - In that case, settlement would release the budget from sender IO
Else, it does not
br, Ajay M -
Budgeting thru Internal Order with Account assignment category 'A'
Dear All
I want Budgeting thru Internal Order with Account assignment category 'A'
i.e
Created Assets with Tcode As01
Created Internal Order and assigned budget amount to IO with Tcode KO01 and KO22
Created Purhcase Requisition with Account assignment catg as 'A' i.e asstes. Also given Internal Order No and Asset code in PR.
Releases PR with ME54N
Created Purchase Order with Account assignemnt catg as 'A' i.e asstes. In Purchase Order it displays Internal Order No. and Asset code which i have given in PR in Account assignemnt tab on Item level
Released Purchase Order.
Now i am checking budget detail in Tcode : S_ALR_87013019 -> List: Budget/Actual/Commitments , Here it gives message , "No line item were selected " in Commitment line items.
Actually my requirement is , i want budgeting thru internal order and want to use Account assignment category as 'A' (Assets) in PR and PO.
Why it's not showing detail in report S_ALR_87013019 .
What is solution for my requirement. Is it possible with some configuration or by other options.
Thanx & Regards
Swati ShahHi Swati,
You can do this in Asset Accounting. By standard MIGO Posting Date is taken as capitalization date for asset. You can configure to make it 'Document Date'.
So, whenever user is posting thru MIGO, he will have better control on deciding capitalization date by inputting appropriate date in Document Date Field in MIGO.
Check this thread..
Re: Depreciation start date for asset thru MIGO
Regards,
Sayujya -
Internal order and Cost center
hi guys
can anyone please explain me why do we have cost centers and internal orders?
If we can track cost to cost center then why do we need internal orders?
please give some detailed explanation.
thankswhen you are posting a document and if the g/l is created as a cost element then
you have to either assign a cost center, profit center, internal order etc
so when you are posting an expense and if its for that project you assign the
internal order and when the project is finished you can settle it to a cost center.
If we can assign both internal order and cost center i dont think so but not very
sure. Best way to learn these things i would recommend is try it in test system
that way you will understand better about the whole flow and it will stick in your
mind.
Regards,
Zaid -
BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT
Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind RegardsIn additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards -
Sales order value flow to internal order without cost elements.
Dear Sap Friends,
My client have a requirement, when sales people creating a sales order, sales value flow into internal order without a cost elements. normal case when SO, Deleivery, and billing data automatically can flow into CO-PA. Here i want to know how value can flow into I.O. without a cost elements please give me advise.
i created a statistical internal order and that internal order i assigned in sales order account assingment. but i know that there is no value going to flow this I.O. becasue there is no cost elements.(becasue client dont want to create a cost element for internal order)
There is any option when i crate a sales order values can go into internal order without cost elements or i can create a statistical Internal Order and assigned into CO-PA? if i can dothatt what is the steps. kindly explain to me. if some have can explain to me please leave contacts number or send me reply.
Regards
PaulBy standard configuration itr is not possible.
You ought to have user exit in place.
For DC A & B, where you need a redetermination of pricing component, take help of an ABAPer for user exit USEREXIT_XKOMV_FUELLEN (module pool SAPLV61A, program RV61AFZB).
So now, for DC C, you need to change the copying control in VTFL - item, where your pricing type ought to be D-Copy pricing elements unchanged.
Regards
JP
ASSUMPTION: I assume that your all DC uses the same Sales Doc type & Billing Doc type -
*Internal Order* or *Cost Center* on SD Sales Order
Hi Gurus,
please can you tell me how we can set automatically Internal Order or Cost Center on SD Sales Order (without putting it manually).
Thank you very much
Kind Regards
AndreaHi Andrea,
As Ambrusa told, one Z table should be created where you can maintain order reasons, sales org, sales order type and the internal order no. as combination and use the below mentioned user exit.
When user create sales order, system will default the order reasons maintained in the z table and internal order no. will be picked as user select the order reason.
Hope this will meet your requirement.
Regards
Suresh. -
Internal Orders with AUC ( Assets under construction) Config steps
Dear Experts,
Can you send me the step by step configuration for Internal order with Asset Under Construction
Thanks
SanjaiHi nick,
you can maintain this in the settlementrule of the internal order, Type ANL
Best regards
Horst -
Internal order with revenues: settling to FI and PSG
Hi,
I have this scenario:
- internal order with revenues has to settle to FI when not TECO - this is working
- when order status becomes TECO - it has to reverse the previous posting - it' s working
and settle to PSG, acording to settlment rule - this is the part where I need help, because it's not working.
Can anybody help me?
Thanks,
LaviniaHi,
Sorry for the delay and thank for you answer, but I have the PA transfer structure configured, also the settlement profile alows PSG and the transfer structuer is alocate to the settlemnet profile. The thing is that when I don't have a RA key, the settlement to PSG is working fine.
Anyway, the customer changed his mind and doesn't need RA for this type of orders and for the moment I don't need a solution
Best regards,
Lavinia -
Internal order with excise problem
Dear All
W have internal order budgeting for consumables.whenever we make purchase order , the account assignment category is f and we purcahse against the particular internal order.
when G/R is done the consumable material gets cosnumed against the particular interla order. ie goods receipt and the issue against the internal order with same movement type.
here is the problem
Whenevere G/R is made the part 1 register(country india version) gets updated .
But because of goods issue against internal order , the part 1 register shows both the receipt and the issue . so whenever the excise invoice is made through j1iex thesystem shows that part 1 entry is not vailable.
In the part 1 register printout shows the receipt and the removal of goods.
as per the excise regulations the part 1 entry sholud be there for the particular material. please suggest how to avoid the removal entry in part 1 register. only receipt has to be updated in the part 1 not the removal ie goods issue.
please suggest how to overcome this issue.
With Regards
balajiWhat is G/R?
-
Steps to create Internal Order with AUC Number
Dear All,
We need to create internal order with AUC number.Kindly provide us the steps to do the configurations. Kindly guide the steps to be followed for creating internal orders with AUC number and way to do the settlement.Dear Kishore,
I am doing the following steps in creating internal orders:
1) Using the tcode KO01, choosing the order type as GEN i am creating an internal order. At the time of creating an internal order i need to give AUN number. Hence i am going to Extras--> Asset Under Construction by giving the investment profile. When i enter it nothing is happening. I am unable to create AUC no manually.
Since i am a beginner, plz guide me to create AUC no while creating internal order. -
Dear Users,
We have an issue, we created PO against Cost Center and now we want to book its expenses(MIR7) against internal order. So if possible suggest me any solution for this.
Thanks,
Manoj.Hi
The only other way is to post a manual JV for such a PO where in you debit the expense account with reference to IO and credit the cost center with expense account. Now do the GRN against the PO with reference to Cost Center.
If you cannot modify the PO, unfortunately, this can be the only way out.
Regards
Sanil Bhandari -
Costing on Internal Orders with different plan versions
Hi,
Is it possible to carry out Costing on Internal Orders using different plan versions?
I would like to carry out more than one costing on Internal Order so that I could compare different versions. Maybe there are other parameters (other than plan versions) which can be used for executing different parallel costing.
Best wishes,
KarolHi Karol,
In Release 3.0, the following new planning functions are available in order planning:
<b>Copy plan versions</b>
In Release 3.0, you can plan order costs for internal orders in different versions. In contrast to earlier releases, you can now
1. change versions
2. copy versions
3. Here you can select :
the planned values to be copied: annual or total values
whether the planned values in the target version are to be retained or overwritten compare versions using the information system
Planned values are not revaluated in the target version (for example, when you change the value date).
Overhead and settlements are not copied and, if required, must be repeated in the target version
Regards,
Hemachandra K S
<b>Please, donot forget to mark the answer as Helpful, Very Helpful or Problem solved.</b>
Maybe you are looking for
-
Ipod touch 1st generation won't hold charge
ipod touch 1st generation will not hold a charge?
-
Java iview Runtime error in Portal Logon
hi I login portal with http://<ipaddress>:50000/irj/portal Java iView Runtime An exception occured while processing your request. com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection If this situation persists, please con
-
7.0.2 won't launch
....same problem as a lot of people....itunes was working fine, but after upgrade to 7.0.2, the program won't launch....i keep getting an error message that says the program unexpectedly quit, do i want to send a report, etc......sent various reports
-
64-bit WLS 11G for Solaris?
I can not locate the 64-bit version of WLS 11G for Solaris. When I go to the download page all I see are 32-bit versions (at least they look like 32-bit version as denoted by the filenames such as wls1031_solaris32.bin). I have attempted to go throug
-
Illegal State Exception in JSP login
I had a working log in/check password systems for a low security application. User types in username and password and this is sent to the checkpassword.jsp. Using Server variables I counted the number of attempts and if it was more than three, they w