Closing Open Service PO's

Hi,
We need close more than 2000 open Service PO's.In service PO there will be not delivery completed indicator.
Please advice how to close open service PO's.
Regards,
Praveen

Hi,
Set Final entry indicator (If you set the Final entry indicator , no further services can be entered against the
relevant purchase order) in your Service Entry Sheet.
Delivery complete indicator is not occur in service order, so you can do this.
You have to set deletion flag in service order line item.
You can do this with ME22N and for multiple service order you can do this with MEMASSPO transaction code.
Regards,
Mahesh Wagh

Similar Messages

  • Open Service PO

    Hi
    Could anyone suggest how to take open service PO ? any reort or table available to download? Is PO closed indicator for service PO available? Kindly suggest
    Regards
    Arvind

    Hi
    Goto Tcode ME2N.
    Tool bar - Edit - Dynamic selections  select
    Purchasing Document item - Goods receipt "No"
    Then item category "D"
    Then execute.
    It will show the open service PO.
    Regards,
    Raman

  • Open service transactions in ICWeb

    Hi all
    I have a scenario that an IC Agent needs to open 2 Service transactions for the same Account at the same time.
    For Example: a contact person is called and wants to Open Service Order for 2 products. The classification is different and so the other data.
    Does the ICweb Client give a Solution for this scenario?
    Thanks for your reply!

    Hi
    You Should use business transaction profile that have Interaction record and then DEPENDENT transaction your service order.
    if you do not want the users to see the IR you first implement the status profile to default "closed" and do not show it on the navigation bar.
    Now after confirm
    one Service Order is open.
    if you want to open another Service Order you should press "NEW" button and new service order is opened.
    when you press END
    2 Service Order is Opened & 1 IR.
    If you confirm Account and do not navigate to Service Order 1 IR will save when you press END.
    The logic is that all incoming call will save.
    I create Z incoming call with status profile that have "closed" default.
    Merav

  • Failed to open service OracleDEV102TNSListener , error 1060

    Dear Consultants,
    I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
    HDD -- 300GB
    I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
    My Installations stops at Import_Abap phase, following are the logs ,
    <b>ERROR 2007-03-10 04:47:46
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    ERROR 2007-03-10 04:47:47
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    INFO 2007-03-10 05:03:18
    An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor</b>".
    I have set the all the Environment variables , i run r3trans -d and the result is
    <b>C:\Documents and Settings\devadm>r3trans -d
    This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
    unicode enabled version
    2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
    r3trans finished (0012).</b>
    <b>I also run r3trans -x and the result is.
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '12541'
    4 ETW000                                                                              21  1.098448
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                 142  1.098590
    4 ETW000  [dev trc     ,00000]  Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    4 ETW000                                                                              22  1.098612
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              23  1.098635
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      1   0244CF08   0245243C   02451CC4
    4 ETW000                                                                              24  1.098659
    4 ETW000  [dev trc     ,00000]  server_detach(con_hdl=0,stale=0,svrhp=02463484)       14  1.098673
    4 ETW000  [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
    4 ETW000                                                                              19  1.098692
    4 ETW000  [dev trc     ,00000]  Deallocating server context handle 02463484           16  1.098708
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      15  1.098723
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
    4 ETW000                                                                              29  1.098752
    4 ETW000  [dev trc     ,00000]  Tue Mar 13 04:38:09 2007                         1093335  2.192087
    4 ETW000  [dboci.c     ,00000]  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
    4 ETW000                                                                              19  2.192106
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '12541'
    4 ETW000                                                                              19  2.192125
    4 ETW000  [dblink      ,00431]  ***LOG BY2=>sql error 12541  performing CON [dblink#3 @ 431]
    4 ETW000                                                                             176  2.192301
    4 ETW000  [dblink      ,00431]  ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
    4 ETW000                                                                              19  2.192320
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DEV'"</b>
    Event Viewer result is
    <b>----
    Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.</b>
    finally in SAPINST logs i could see
    <b>
    Starting tnslsnr: please wait...
    Failed to open service <OracleDEV102TNSListener>, error 1060.
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
    Log messages written to C:\oracle\DEV\102\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
    .\pipe\DEV.WORLDipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
    .\pipe\DEVipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date                10-MAR-2007 01:29:29
    Uptime                    0 days 0 hr. 0 min. 3 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\DEV\102\network\admin\listener.ora
    Listener Log File         C:\oracle\DEV\102\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
    .\pipe\DEV.WORLDipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
    .\pipe\DEVipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
    Services Summary...
    Service "DEV" has 1 instance(s).
      Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully</b>
    Please suggest for the possible workaround, as you can see i have tried everything.
    Regards,

    Dear Umesh,
    I have triggered the Installation again, still the problem remains unresolved,
    PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
    pasting the last few lines of  logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
    DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
    (DB) ERROR: DDL statement failed
    (CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 4031)
      error message returned by DbSl:
    ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
    (DB) INFO: disconnected from DB
    E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
    ===================================================
    IMPORT_MONITOR.JAVA logs.
    Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
    Loading of 'SAPAPPL1_15' import package: ERROR
    Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
    Loading of 'SAPAPPL2_5' import package: ERROR
    Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
    Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
    Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
    Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
    Loading of 'D021T' import package: OK
    Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
    Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
    Loading of 'SAPAPPL1_12' import package: OK
    Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
    Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
    Loading of 'SAPSSEXC_4' import package: OK
    Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
    Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
    Loading of 'SAPSSEXC_6' import package: OK
    Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
    Regards,

  • Open Service Orders

    On December 31st the client would have open service orders in old company code.
    We wish to transfer these service orders to a new company code.
    How to calculate WIP and post balances to WBS in the service orders in new company code.
    Getting lost! Any help?
    Reg

    Hi,
    You have to define Alert modeler and assign it to your webclient profile. After confirming an account  alerts agents to existing documents, which the system finds in the interaction record. This alert contains a link, which agents can use to navigate directly to the existing documents.
    Reward points if helpful.
    Shridhar

  • LSMW for open notifications,open sales order & open service order

    Hi Gurus,
    Can anyone please tell me how to go about writing LSMW's for open notifications,open sales order & open service order.
    This is for service processing in CS ,where has the scenario is 
    Create Notification (IW51) --> create Sales Order(Multiple Line Items) ( VA02) --> Create Service Order ( IW32)
    Service order is automatically (Item Proposal) generated w.r.t Sales Order (multiple line items)
    How to I do the recording for transactions in such a scenario.
    Please suggest!
    Thanks!
    Vinod

    you can use the below LSMW IDOC method
    SALESORDER_CREATEFROMDAT2       Sales order: Create Sales Order
    SERVICENOTIFICATION_CREATEFROM  Create service notification
      SERVICE_CREATE                  Creation of a Service Master Record
    CARNOT                          Delivery: Shipping notification
    DESADT                          Shipping notification
    DESADV                          Delivery: Shipping notification
    INOTIF                          Notifications
    INTUPD                          Notification Status Update
    ISU_ADVICE                      IS-U Deregulation: Notification
    ISU_CHANGE_REQUEST              IS-U: Notification of Change to
    ISU_MAINT_SO                    IS-U Dereg.: Notification of Dev
    ISU_REMITTANCE_ADVICE           Transfer Notification

  • Source Safe causing LabVIEW Quick Start Screen to not appear after closing open vi windows?

    Hey All,
    We've recently implemented Source Safe version control for LabVIEW on XP and I've noticed that LabVIEW is hanging between closing open vi windows and showing the Quick Start Screen.  The usual pattern is for the Quick Start window to appear after the last open vi window is closed.  Instead the vi window is closed, the tab at the bottom of the screen says debug development and the Quick Start Screen does not appear, the tab does not read "Getting Started."
    I think it is a LabVIEW <--> Source Safe issue when I do a Task Manager Exit on the LabVIEW process that I sometimes see a dialog box asking if I want to save changes in memory to disc and those files are not checked out.  But it is too late at that point to do anything as XP clobbers the application before I can do anything.
    Anyone else have this issue?
    Message Edited by Drewski on 05-30-2008 02:28 PM

    What LabVIEW version do you use?
    I have used SourceSafe in every version from 8.0, and in the way some bugs are resolved.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to put authorization on closing open item list

    Hi to everyone!
    How can i put authorization on closing the open item list and partially closed open item list.
    Thanks
    Rohan

    Hi Rohan,
    Have you tried:
    Administration -> System Initialisation -> Authorizations -> General Authorizations:
    Authurisation Window: General -> Close Document = No Authorisation.
    This will block the user from closing documents in the open Item list but also from other menu points.
    Hope it helps.
    Jesper

  • Open Service PO's

    Dear All,
    I have created a Service PO and partial qty services done.
    I want to close this PO and how should be done.
    I want to see the open PO report where this PO should not appear.
    Please advice.
    Regards

    Hi,
    Delivery completed indicators is for Material PO only not for services.
    For material PO, works fine.When i see in ME2N, the remaining qty not get appeared.
    Whereas for Service PO, i am not getting the result in ME2N for open service PO.
    Please advice.
    Regards

  • Unable to open service BOE120 TOMCAT and Unable to STOP severs in CCM

    Hi Everyone,
    i have installed business object Edge series 3.0 in windows 2008 server standard edition. I also installed crystal 2008, xcelsius engage 2008 , live office, SAP GUI 7.10. I did not installed SAP Integration yet. The installation has done in 'D-drive' instead of 'C-drive'. The installation has been done successfully for above products.
    Now i am facing two problems.
    In CCM, both  TOMCAT and SIA are  in running state.
    1. when i  try to open tomcat configuration, i am getting an error as below
      ' Unable to open service BOE120 TOMCAT'
    2. In CCM, when try to stop the TOMCAT or SIA, system showing an error
      'Unable to stop the service, Access Denied'.
      But when i go to windows services, there i can able to stop tomcat.
    What could be the reasons for above error? Wait for your reply.
    Thank you all in advance

    Hi,
    when you want to stop the services via ccm are you logged in as a user with local administrator rights ?
    Regards
    -Seb.

  • Open Service Connection to Enterprise Portal system from Solution Manager

    Hi All,
    We are getting below error, when we tried to Enable/Open Service Connection ( DSWP -> Solution Landscape ->Service Connection) to Enterprise Portal system.
    Here we selected the row Connection -> R/3 support  and Connection tab -> open/change connection and clicked on SUBMIT. The we got below short dump.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_WD_CONTEXT
    Short text
        An exception occurred that was not caught.
    What happened?
        The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along the call hierarchy.
        Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
         'CL_WDR_CONTEXT_NODE===========CP' has to be
        terminated.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis:
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
        therefore caused a runtime error.
        The reason for the exception is:
        The node does not contain any elements. COMPONENTCONTROLLER.1.SYSTEMS.1.CLIENTS
    How to correct the error:
        If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following keywords:
        "UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
        "CL_WDR_CONTEXT_NODE===========CP" or "CL_WDR_CONTEXT_NODE===========CM00R"
        "_RAISE_ELEMENT_NOT_FOUND"
    SMSY configuration ( logical component assignmnet) is alredy done. Is it required to do any other settings. SMD ( Solution Manager Diagnostics ) settings are not done. Is this required?
    We are able to enable/open Service Connection open to ABAP system . Only for Java system we are getting error.
    Please help me on this.
    Thanks..
    Preethish

    Hi,
    note 1081895 should solve this. Otherwise please create a ticket.
    Regards
    Andreas

  • Lync Server 2013 Standard Deployment: Cannot Open Service Control Manager...

    Hi
    thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
     Initializing DbSetupBase
     Parsing parameters...
     Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
     Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
     Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
     Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
     Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
     Found Parameter: Role Value master.
     Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
     Exception Stack:
     Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
     Type: System.ComponentModel.Win32Exception, Message: Access is denied.
    best regards,
    George
    George Guo

    please verify your computer name while you creating FQDN pool FQDN of Server name
    example
    computer name
    is server1
    domain name is abc.ae
    so,
    your FQDN pool name will be server1.abc.ae
    problem solved :)

  • OPMD Install failed to open service control manager

    Hi
    I have an oracle 10.2.0.5 RAC installation on windows 2008R2 and I am encountering error when trying to install opmd-install
    I received the error OPMD Install failed to open service control manager

    Hi,
    It seemed the issue was resolved by installing the Agent manually. Since the subdomains are fully trusted, there is no need to install Gateway or Management Server in each subdomains. After installing the agents, the alerts can be received on domain.
    Deploying Agents Across Multiple Domains
    http://technet.microsoft.com/en-us/library/cc179947.aspx
    Niki Han
    TechNet Community Support

  • Trigger alert for open service orders

    Hi,
    We are using CRM 7.0. We have a need where we wan to trigger an alert on BP confirm to say " <customer name> has <#> open service orders". This alert should only be triggered if the customer has at least one open service orders.
    Thanks
    Dan

    Hello Dan,
    This process is descibed also in the RKT material for CRM 7.0, but here is a quick overview of the main steps:
    Create an alert in the Alert Editor that contains the attribute Fact Base - Service Order/Ticket ID, which will show up in the alert editor as [FACTBASE$BT_CURR_OBJ_ID]. At runtime this attribute will be replaced by the ID of the actual open service ticket. Make sure that you also specify the navigation object: type/action BT116_SRVTK:B (Service Ticket:Display).
    Then create a rule in the Rule Modeler using context Intent-Driven Interaction. You would have a condition like, "If current event = BP Confirmed" and an action Trigger Alert, with the ID of your alert above in the parameter.
    One alert will then show up for each open service ticket/order. If there are no open tickets/orders for that customer, no alert will be triggered. Clicking on any alert will navigate to that specifc order/ticket mentioned in the alert.
    Best regards,
    John

  • Open Service Order - Template

    Dear Friends,
    I need to upload few open service orders hence could you please let me know where to search for some Migration templates [Excel file] which I can use to input all the service order data and later upload the same.
    Thanks & Regards
    Prasad Subramanya

    Hi,
    Create your own LSMW / BDC that will give an Excel Template.
    Babu

Maybe you are looking for

  • Adding field in Maintenance view of table

    Hi, I am trying to create a custom maintanable table.  Now the requirement is I need to add one more extra  field in the maintenace view of the table which should not be in the table fields and is for display only in the maintencae view. I tried addi

  • Firefox won't download pdf's using iMacros "TAG" command

    For work, I automated the downloading of documents (doc, docx, pdf files etc.) using a simple macro in iMacros. I had to use a macro because the nature of the site is - go to the main screen, click a client name link, scroll down and click a link to

  • When Scaling Image, Cannot See All Of Image

    I want to allow the user to zoom into an image. Using drawImage(Image img, int x, int y, int width, int height, ImageObserver observer) achieves this, however it displays the scaledImage on background that is of the same size as the original image. i

  • Requesting user input from UNIX command window

    New to this forum, and relatively new to Java......question for you...... Currently, I am able to request a .txt file from a user in my unix command window by having them type in the following command: java Game (nameOfTextFile).txt with the followin

  • Resizing and exporting to flash = headaches and long nights

    I have footage shot in 16:9 PAL DV (interlaced) Client now wants delivery as a flash file 600 x 400 pixels. +How do I get the best result?+ Should I output the file as a PAL DV interlaced and then convert it to flash? The results I got are not very s