Closing the Capture window crashes Premiere

Hi,
I'm attempting to capture video from a Sony DHR-FX1. The capture window doesn't show the video as it plays, but it appears to record it; when I stop and save the clip, the saved video appears in the Library window with a visible thumbnail of the video. As soon as I close the capture window, Premiere suddenly shuts down.
The settings in Premiere:
HDV 1080i30 (60)
29.97
1440x1080 (1.33 anamorphic)
16x9
48kHz 16 bit
The computer is a MacPro Tower with OSX Snow Leopard and I'm running version CS5.5.
Thanks much,
--Chaz

My version of OSX is 10.6.2
I purchased the Master Collection just this week so this is my first time using CS5.5 (and on a Mac no less). I downloaded the latest updates for Premiere [5.5.2] and there was a small improvement. Which now means the program doesn't crash immediately after closing the capture window, though it does eventually. I'm wondering if the crash when closing the capture may have been a coinidence before anyway.
There was a small delay before my latest crash which gave me enough time to save a short 5-sec test snippet. The footage was still in the file when I restarted so we're headed in the right direction. I'm attempting to record the entire tape at once to see if I can manage to save that with the same results.
Are there Codecs associated with this product or for the Mac that you're aware of?

Similar Messages

  • The capture window in Premiere Pro does not show video feed from Beta SP

    Dear Sirs
    The capture window in Premiere PRO CC with blackmagic 4k extreme (Desktop Video 10.1 for Windows) does not show a live video feed in, from analog beta sp, It works only in media express.
    Can you help us?
    Thanks
    Alessandro

    Starting from a fresh new win7 installation, all problems solved
    Bye
    Alessandro

  • Why is the image in my capture window of Premiere Pro 2 is too large.

    The image in my capture window of Premiere Pro 2 is too large, however the capture is correct on the time line for editing.
    Why is it too large? and how do I correct it?
    Thank you for taking the time to read this e-mail and for answering my question.
    Yours truly,
    Thom Elliott
    Photographer

    Also, for future reference, PPro2 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
    For this discussion, what are you editing?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Open URL in a new window by closing the parent window

    Hi Friends,
    Is there any option to open URL in a new window by closing the parent window on a button click?
    Already implemented the logics suggested in /people/mohammed.anzys/blog/2007/06/05/how-to-close-parent-window-in-webdynpro-applications , the thread ' URL in same window '  and the standard component WDR_TEST_EXIT_PLUG .But button is not triggerring any actions .plz help me  ..............
    Regards,
    Radhika

    hi,
    Do the following steps :
    -> Make an Outbound Plug to the Window.
    ->Make the type of Outbound plug to Exit Type.
    ->Add URL of type String as a parameter to the outbound plug of Window.
    ->Do remember to add Component Name in the Properties Tab of View ( othervs Calling Outbound plug of window from view wont b possible ).
    To open a new URL with closing the previous one write this Code in OnAction of Button : ( this Code can be get from Code Wizard too ).
    DATA lo_zexit TYPE REF TO ig_zexit .   <zexit is name of my Component>
    lo_zexit =   wd_this->get_zexit_ctr( ).
      lo_zexit->fire_out_window_plg(
        url =   'http://www.google.com'                            " string
    I hope it helps.
    Thanx.

  • Many times it happens that even I had closed the application window i had to manually  quit the application by going in 'forced quit'..any solution .. :(

     many times it happnes that even I had closed the application window  it keep running  on backend and I have to manualy close it again by going in  'forced quit'.. any solution.... 

    Closing the window doesn't quit the application on Mac like it does in Windows. You have to select Quit (Program Name) from the top menu or use the keyboard shortcut Command + Q

  • A second browser window will not open and then closing the 1st window firefox will restart. Taskmgr shows it still running, it will not restart until I end the process in taskmgr.

    I open the browser and close it every thing is fine. I open the browser and then attempt to open a second browser window, it will not open. Now because I've attempted to open a second browser window firefox will not restart after closing the open window. Until I've shut it down in the taskmgr. This just started the other day and I have removed the only update I made that was "flash" and I removed the 64 bit version of firefox.

    Win 7 with iTunes installed - I was also having problems with that.
    "netsh winsock reset" at the command prompt resolved all issues and Firefox launched normally.
    Check to see if Winsock is corrupted. May prevent FF from communicating with the web and consequently fails to launch properly - for my situation was not a firewall or antivirus block!
    http://support.microsoft.com/kb/936211#LetMeFixItMyselfAlways
    Click Start, and in Start Search, type cmd.
    Right-click the cmd entry that appears in the search results, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    At the command prompt, type the following, and then press ENTER:
    netsh winsock reset
    Then, you should see the following message:
    Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
    Restart the computer.
    Note If you receive an “Access Denied” error message instead of the message that is mentioned in step 3, the command prompt was not correctly elevated. In this case, close the Command Prompt window, and repeat steps 1 through 3. Make sure that you correctly implement step 2.

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Issue Tracker app closing the browser window on chart page

    Hi!
    I am walking through the Issue tracker tutorial. I have created page 10 (Issues Resolved by Month) which is the chart page. Everything looked fine until I try to run the page. Then it simply closed the browser window after it authenticates me. Anyone else see this? Any ideas?
    Thanks!

    Probably a problem with your SVG viewer installation. Does it happen on other chart pages as well? What browser/svg viewer version combination are you using? There are some known issues with what's labeled as the current svg viewer on Adobe's website and Firefox.
    Earl

  • How to create a Child Window without closing the parent Window

    Hi All,
    I have a requirement to create a child window without closing the parent window. I have to click an item in the parent window, then one child window should get open. The parent window should not be closed before closing the child window.
    Kindly help me in this.
    Thanks and Regards,
    Myvizhi

    Hi All,
    I found the solution for this. I have created a new page. Then i created an item as link item style in the parent page and i have set the following properties in the Link item:
    Destination URI : OA.jsp?page=/seagate/oracle/apps/seasoa/que/webui/SeaSoaHeaderDetailPG&headerId={@ErrHeaderId}&retainAM=Y&addBreadCrumb=Y&backPage=S
    Target Frame     : _blank
    This is opening the new child window without closing the parent window.
    Thanks and Regards,
    Myvizhi

  • My tabs are seperated into groups. Once I accidentaly opened a site in a new window (not a new tab). After that, I accidentaly closed the Firefox window with all my grouped tabs. Now, I can't recover it. Are there any solutions?

    I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?

    Hi,
    We have rolled out a fix for this issue.
    Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
    For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
    Please let us know if you still face any issues.
    Thanks,
    Ashu Mittal

  • I'm unable to drag-and-drop a script from the Story window in Premiere Pro to a clip

    I have a film script visible in the Story window, and I try to drag it to the relevant clip in the Premiere Pro project window—but nothing happens.
    I have also tried to attach an astx file, but I get the "matching scene number not found" error, even though I put scene number 1 in the clip and in the astx.
    What am I doing wrong?
    Incidentally, though your help indicates that "all the scripts" you have in Story will be visible in the Story Windows in Premiere Pro, I can see only the film scripts—not for instance the multicolumn scripts I also have.  Is there something I can do about this?
    Thanks you,
    PIerre Sauvage

    Hi,
    Please make sure that you are performig drag drop with scenes and not complete scripts. You will notice a cursor change when you do so. For more clarification, please refer to this post. 'http://forums.adobe.com/message/5533247#5533247'.
    Importing astx is a much longer way to go through the same thing , so i would suggest to try out the drag drop workflow only and let me know in case you still face issues with it.
    Also, yes, column scripts wont be visible to you in the Story panel inside Premiere. For this, I am afraid you will have to convert your column scripts into a film script. Let me know if you need help with this.
    Hope this helps.
    Thanks
    Rashi

  • Yoga 2 Pro: Tablet mode enabled by closing the laptop and crashing minimized store apps

    Since clean installing Windows 10 on my Yoga 2 Pro I'm experiencing Store apps to become a complete white useless windows after waking up the device from standby. Further investigation brought up the following perceptions:
    1) This only happens with Store apps minimized to the taskbar before getting the device into standby; Win32 apps are not affected
    2) This only happens if the standby is initialized by closing the laptop and NOT manually through the start menu 3) The Problem also only occurs if the machine is set up to be locked automatically after waking up (default setting in Windows 10 is not to be locked btw.)
    The second one got me wondered. After some puzzling around I remembered that I - as a Windows Insider - some time ago observed that the tablet mode in Windows 10 is initialized even if the screen is almost closed. Back then I tested this also on my installation of Windows 8.1 and came to the conclusion that even there the keyboard and touchpad get disabled by nearly closing the laptop. Back then there was no tablet mode so that it was not noticeable at first sight but could be tested by using the touchpad and keyboard with the screen close to the keyboard.
    So ymc.exe as part of Lenovo Transition 2.0 seems not able to detect in which direction the screen is rotated. There seems to be some angle at which the mechanism is initialized regardless whether the screen is rotated AROUND the machine for using the tent or tablet mode OR rotated CLOSE to the keyboard. This seems by design.
    Problem with this for Windows 10 is: It's getting Store apps crashed that are minimized to the taskbar if the option to always switch to tablet mode automatically is ticked on and the machine is locked after waking up from standby because the machine changes into tablet mode before sleeping down and changes back to desktop mode if waking up. It seems like minimized Store apps don't support this kind of behavior and are getting totally blank and unusable.
    I clean installed Windows 10 from scratch and everything is set up the right way. I have an secondary Installation of Windows 10 for testing purposes (Insider Preview) on a secondary partition of this machine that is set up with the same Windows 10 release build and am able to reproduce this behavior there, too.
    Workaround for now is to disable the option to change the mode automatically or to lower security by setting up the machine not to be locked after waking up from standby. Even with the latter this behavior of the device is at least unattractive as Windows and/or the start menu get resized all of a sudden after waking up the device.
    Is it technically possible for a newer version of Lenovo Transition to be able to invoke the tablet mode only if the screen is rotated around the device and not by closing the laptop to prevent minimized Store apps from getting blank and unusable?-----Post edited to add the Point 3.

    Go to Control Panel >> Device Manager
    There is Sensor devices tab there.
    Can you post a screenshot of how that is looking?
    One thing that you can try.
    Switch off your laptop.
    Disconnect power supply
    Press power button for 30 seconds.
    Then turn on and test.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • When one window containing 1 tab is closed, the other window with several tabs closes also

    I have a set of web pages that reproducibly causes Firefox to act incorrectly. When Firefox is first started I click the "Restore previous desktop" button. Then I have 2 Firefox windows. The first to open has 6 tabs; the second has 1 tab. When I close the 2nd window (with 1 tab), it also closes Firefox completely with no error message. When I run Firefox again, "Restore" creates both windows exactly as they were before.
    I don't know yet if the actual URLs make a difference, but here they are anyway:
    '''''Window 1:'''''
    https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false&continue=https%3A%2F%2Fmail.google.com%2Fmail%2Fu%2F0%2F%3Fshva%3D1%26ui%3Dhtml%26zy%3Dl&bsv=llya694le36z&ss=1&scc=1&authuser=0&ltmpl=default&ltmplcache=2&from=login#inbox
    http://branamsmile.com/gum/?gclid=CLepiIaAhqkCFVJ25QodSyk1nw
    http://www.google.com/search?hl=&q=root+viewsonic+g+tablet&sourceid=navclient-ff&rlz=1B3GGLL_enUS412US412&ie=UTF-8&aq=0&oq=root+viewsoni
    ***** NOTE THIS TAB IS PROBLEMATIC *****
    When I press Alt+D, Ctrl+C, and Ctrl+V it into this comment box, I get
    '''woot'''
    When I look at the actual contents of the web page being displayed, it is the verizon wireless rebate page:
    '''www.verizonwireless.com/rebates'''
    The page has definitely finished being rendered (the refresh icon is displayed after the url "woot"), but the URL does not match the page. The URL displayed is not even in its proper form (i.e., www.woot.com).
    Remember that this page was RESTORED by Firefox from a previous session. It is as if I was on that tab at verizon, tried to go to woot.com by typing "woot" (which would of course bring up a search rather than the web page), DIDN'T PRESS ENTER, and Firefox is duplicating that entire sequence.
    ********* END PROBLEMATIC *************
    chrome://foxtab/content/newTabMessage.html
    https://www.bankofamerica.com/Control.do?page_msg=signoff&body=signoff
    '''''Window 2:'''''
    http://www.freewaregenius.com/2011/06/01/the-best-freeware-file-manager-a-comparative-analysis/
    With this exact set of windows and tabs, as restored by Firefox in a brand new instance of it, double-clicking the red Firefox in the top left corner of the 2nd window causes both windows to close.
    I wish I could save this configuration so I could always reproduce the error, but I need my computer :)

    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • Problem with the preview window in Premiere Elements 10

    Hi guys,
    I have a question:
    I have a new PC (data follow) and Adobe Premiere Elements 10.
    My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
    PC:
    AMD FX-8350 Eight Core Processor 4 GHrz
    NVIDIA GeForce GTX 750 Ti
    Do you need even more?
    What I have already tried:
    - Adobe Premiere Elements 10 anew inst.
    - Graphics drivers update
    - Check DirectX
    - Windows Media Player and QuickTimePlayer anew Inst.
    Already to many thanks for your help!!!!!
    lg
    Börni

    borni123
    What computer operating system is your Premiere Elements 10 to run on?
    You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
    in the Announcement at the top of this forum. Copy for your convenience below.
    You gave a lot of details but did not include the computer operating system. This information may be the key whether
    the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
    is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
    a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
    specific for Premiere Elements 10 and the NVIDIA GeForce cards.
    Copy of Announcement at top of this forum....
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
    roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
    available to you.
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    Please update us on your progress,
    Thank you.
    ATR

  • IFrame(child container) still visible after closing the title window(parent container)

    Hi All ,
    I have created a sample project using a link button which when clicked opens up an TitleWindow which has an iframe and a text area in a hbox
    When you execute the application ,
              Click the link button
              The Popup window opens up showing the title window with the close button
              Click the close button of the title window
              The Title window is removed and the iframe and the text area are not visible
    Do this a couple of times
    You can notice that the iframe is still visible even when the title window is closed
    Can someone explain me how this issue can be resolved and also explain me why the iframe(child container) is still visible when the title window(parent container) is not visible. 
    Main Application file
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application
        width="100%" height="100%" creationPolicy="all"
        xmlns:mx="http://www.adobe.com/2006/mxml"
        layout="vertical" creationComplete="init()"
        xmlns:containers="containers.*">
       <mx:Script>
       <![CDATA[
           import mx.managers.PopUpManager;
           import containers.PopUpBrowser;
           public function doRequest():void
                    var requestPopup:PopUpBrowser = PopUpManager.createPopUp(this, PopUpBrowser) as PopUpBrowser;
                    PopUpManager.addPopUp(requestPopup,this);
                    requestPopup.x = 220;
                    requestPopup.y = 50;
       ]]>
       </mx:Script>
       <mx:Text fontSize="14" fontWeight="bold" text="Click the link button below to open the Title Window" />
       <mx:Spacer height="100"/>
       <mx:LinkButton label="Click me" fontSize="16" fontWeight="bold" click="doRequest()"/>
    </mx:Application>
    PopUpBrowser.mxml Component
    <?xml version="1.0" encoding="utf-8"?>
    <mx:TitleWindow
        xmlns:mx="http://www.adobe.com/2006/mxml"
        close="removeMe()"
        showCloseButton="true"
        styleName="myTitleWindowStyle"
        width="850" height="500"
        title="Klout User Profile"
        paddingTop="1" paddingBottom="1"
        paddingLeft="1" paddingRight="1"
        xmlns:generic="com.serendio.voom.components.generic.*"
        xmlns:flexiframe="http://code.google.com/p/flex-iframe/"
        horizontalScrollPolicy="off"
        verticalScrollPolicy="off" >
        <mx:Script>
            <![CDATA[
                import mx.managers.PopUpManager;
                public function removeMe():void
                    PopUpManager.removePopUp(this);
            ]]>
        </mx:Script>
        <mx:HBox width="100%" height="100%">
        <flexiframe:IFrame source="http://www.google.com" id="iFrame" width="50%" height="100%"/>
        <mx:TextArea text="Open and close the title window few times and watch the iframe remain visible even when the title window is closed"
             fontSize="14" width="50%" height="80%"/>
        </mx:HBox>
    </mx:TitleWindow>
    Thanks,
    Ajantha

    Hey,
    This is working fine for me with the current 4.5 Flex, Firefox 3.6.12, IE8. On what browser you are getting this error.
    Thanks,
    Jayagopal.

Maybe you are looking for