Closing the qty of PR which was already processed.

There are a PR of 1000 qty and user has done the PO, gr and IV of 100 qty.
Now requirement is to close the pr or change the qty for remaning qty(900),
bcoz its showing open qty and they don't want to use these qty.
There are many PR like that.
so there are any procedure to do it.

hi,
In addition to above...
You can use the close indicator given at the PR...
But ...
System will still allow you to make the PO referencing this PR...Although the open qty doesn't change....
So, i would suggest you to change the PR manually...
Regards
Priyanka.P

Similar Messages

HT1782 Is there a way to partition my bootcamp via disk utility whithout impacting the windows 8.1 which is already installed?

I have got a new macbook pro 15 with SSD - 512Gig, RAM - 16 Gig, NVIDIA GPU - 2 Gig. I basically work on windows stuff and I heard of the bootcamp support that apple provide to install windows in their models and wanted to try the best APPLE mobile PC.
What I did:
I logged in to windows 8.1 via bootcamp and under disk management tool in windows I partitioned my bootcamp drive to add a new partition. The partition was successfully done but when I tried to bootcamp back to OSx, the diskutility did not recognise the addtional partition that i created, eventually i couldnt logon to OSx. Then I logged back in to windows 8.1 and deleted the partition and tried loggin to OSx. But now the diskutility didnot recognise any of the drives at all, and I ended up earsing all the partitions and recovered OSx via internet.
I guess the partitions cannot be modified outside the OSx itself. So is there a way to partition my bootcamp via disk utility whithout impacting the windows 8.1 which is already installed?
Any one please help.
Thanks in advance,
Sreejesh.

After using BootCamp to partition a drive, the partition map is a hybrid that Disk Utility is unable to do anything with safely as far as partitioning goes.
Try Camptune from Paragon at http://www.paragon-software.com/home/camptune/ instead.
Allan

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?

Hi ..
Reset the PRAM > About NVRAM and PRAM
Those instructions are for Mavericks but will work on Yosemite as well.
Then try the USB modem.

HT204088 So I put in my debit card info into my phone so I could redownload apps and while I was refreshing netflix (which was already purchased) it rebought itself twice and took $14 (USD). What can I do?

So I put in my debit card info into my phone so I could redownload apps and while I was refreshing netflix (which was already purchased) it rebought itself twice and took $14 (USD). What can I do? Someone please help!

Contact iTunes Support: http://apple.com/emea/support/itunes/contact.html.

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source.

Download- my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

while waiting for a phone number, if you need an installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error while starting the Wily : A socket port was already in use

Hello,
When I strat the Wily intro scope I am getting following error.
Kindly help me resolving this issue.
er3esu31:p43adm 4> nohup ./runem.nohup.sh &
[1] 20549
er3esu31:p43adm 5> Running Enterprise Manager with IHOME=.
Running Enterprise Manager with JAVAPATH=/usr/sap/ccms/wilyintroscope/jre
java version "1.5.0.03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.03-_13_feb_2006_16_39)
Java HotSpot(TM) Server VM (build 1.5.0.03 jinteg:02.13.06-21:25 IA64, mixed mode)
log4j:ERROR Failed to flush writer,
java.io.InterruptedIOException:
        at java.io.FileOutputStream.writeBytes(Native Method)
        at java.io.FileOutputStream.write(FileOutputStream.java:260)
        at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336)
        at sun.nio.cs.StreamEncoder$CharsetSE.implFlushBuffer(StreamEncoder.java:404)
        at sun.nio.cs.StreamEncoder$CharsetSE.implFlush(StreamEncoder.java:408)
        at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:152)
        at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:213)
        at com.wily.org.apache.log4j.helpers.QuietWriter.flush(Unknown Source)
        at com.wily.org.apache.log4j.WriterAppender.subAppend(Unknown Source)
        at com.wily.org.apache.log4j.RollingFileAppender.subAppend(Unknown Source)
        at com.wily.org.apache.log4j.WriterAppender.append(Unknown Source)
        at com.wily.org.apache.log4j.AppenderSkeleton.doAppend(Unknown Source)
        at com.wily.org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(Unknown Source)
        at com.wily.org.apache.log4j.Category.callAppenders(Unknown Source)
        at com.wily.org.apache.log4j.Category.forcedLog(Unknown Source)
        at com.wily.org.apache.log4j.Category.log(Unknown Source)
        at com.wily.util.feedback.backend.log4j.Log4JBackend.log(Log4JBackend.java:139)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.doLog(ADefaultModuleFeedbackChannel.java:545)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.logbottleneck(ADefaultModuleFeedbackChannel.java:524)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.log(ADefaultModuleFeedbackChannel.java:479)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.error(ADefaultModuleFeedbackChannel.java:313)
        at com.wily.util.event.ListenerTracker.sendEventToOneListener(ListenerTracker.java:148)
        at com.wily.util.event.EventPump.immediateDeliverEventIfListenerNotDead(EventPump.java:152)
        at com.wily.util.event.EventPump.immediateDeliverBroadcastEventAsync(EventPump.java:123)
        at com.wily.util.event.EventPump.access$300(EventPump.java:23)
        at com.wily.util.event.EventPump$Posting.deliver(EventPump.java:512)
        at com.wily.util.event.EventPump$EventPumpThread.run(EventPump.java:760)
Introscope Enterprise Manager failed to start because:
A socket port was already in use (see the log for the port number)
Press 'Enter' to acknowledge....
[1] +Stopped (tty input) ./runem.nohup.sh
Thanks & Regards
Girish

Hi
Check whether introscope is already running. if it is then kill that process manually and start willy again.
You use the following command to check whether any other program is using the same port
netstat -an | grep -i listen | grep 80

Changing a customer exit variable in Step 2 which was already set in Step 1

Hello,
i have the following problem.
There are 2 BEx customer exit variables A and B.
Variable A is filled in Step 1 before the user dialog appears.
Variable B is determined in Step 2 in dependence of variable A.
Now i want to change variable A in dependence of user entry althoug it was already filled in step 1. Can i somehow force the variable manipulation in step 2 for a single variable wich has already been set in step 1?
Or is there a way to change all variables at once after they have been set e.g. in step 3?
Regards,
Alexander

Hello Alexander!
It's true: You cannot change values that were entered in step 1. It's a feature This is supposed to make sure that a value that was entered (or confirmed) by the user can never be changed by any piece of coding - customer or SAP. If that possibility existed, then that would create some real issues for reliability and also support.
What is your scenario that you are trying to solve? Maybe there's another way to do it?
Regards,
Christian!

How to transfer a video which was already on sd ca...

How do i transfer videos which were already on my sd card into my photo album? I can only get them through the

Onedrive has a silly size restriction on video files (300MB the last time I tried). Can you see the video files if you connect the phone to a PC ? You can transfer from there.

TS1398 My wife's 4s won'tallowthe wi-fi setting to work, it's grayed out. I have reset the network settings 4+times and stil lnothing. Under General, About the Wi-Fi shows N/A. I bleive all this was caused by the latest software update which was waitin

My wife's 4s needed to update the software. when it was updated/downlaoded the Wi-Fi would not work. It is currently grayed out and under General, About: the Wi-Fi is N/A. Does anyone have a suggestion to correct. I called Apple support and they felt it was the software update because it worked prior to the update however they wanted to charge 19.95 to assist. Thank you all.

If it is a hardware issue, then you don't get charged the $19. But, if it turns out to be a setting you messed up, then YES, they will want to charge you $19 to help you learn how to use your phone after your 90-days of FREE phone support expired. Or you could read the manual or articles that are available for free online.
Basically, if you want someone to hold your hand, then you'll pay for it.
However.... having said all of that, try this article: http://support.apple.com/kb/ts1559

Can we manually change the status of request which is already approved?

Hi,
we are using standard Record Working Time and approal ESS MSS Application.
can we change the status of request which is approved to not approved or released for approval?
(in our case, request released for approval is displayed on weekely basis in approval page and
on review page (approval) we have number of hours recorded for particular day in that week is displayed.)
the problem we are facing is,
user submitted data for a week and manager approved it.
but now we have to change the data entered for that week, only for a particular day and submit it again for approval.
we have changed the data for that particular day using HR-TSADMN. and submited it again for apparoval.
but this time only the record (particular day) which has been changed is shown in the approval review page of approval iview MSS.
but our client needs data of all the days in that week displayed.
can we get the approved + edited data for the week displayed on the review page of approval??
if can't, then if we change the status of the approved data for that particular week then the user can again submit the data for that week and data of all the days in that week will be displayed on the review page for approval.
plz help me.
Edited by: madhu1011 on Nov 30, 2011 2:23 PM

to change the status by user, he can modify the hours in the application and resubmit
For administrator purposes, you should cats_appr_lite, you can reject the all time and do it,
Do not make any changes directly to CATSDB< it might cause inconsistency
So better use standard transaction like cats_appr_lite or cats_da

I've a few issues, my old computer was out of memory and i changed to a new one which was already on another itunes account. When i upgraded to os5 my library has gone it has synced with the new computer - how do i restore the old ipad information? ple

I've a few issues, my old computer was out of memory. I changed to a new one which already had another itunes account (for my business) when i upgraded to os5 my library has dissappeared as it has syncd with the new computer. Is there any way i can restore the information previously from my ipad? really appreciate any advice thanx in advance

Lynda-
If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync. Now that you have it updated, you will not need to do that again.
Fred

Clicking on an e-mail address will NOT open Windows Live Mail which is already the default mail program which is already set as the default mail program

Clicking on an e-mail address will NOT open Windows Live Mail. Windows Live mail is already set as my default e-mail program.

Sorry you're having this problem. I think it was previously reported only by Windows XP users.
When you reinstall, were you making Firefox your default browser? Some users have reported that ''not'' making Firefox the default browser was an effective workaround.
However, you may have success with this approach, suggested by a user in another thread, which appears to more thoroughly update the Windows registry:
# Open Adobe Reader / Acrobat
# Edit->Preferences
# In the Categories column click 'General'
# Near the bottom of the page click the button marked 'Select Default PDF Handler'
# In the dialog, select 'Adobe Reader XI' (or Adobe Acrobat, as the case may be) and click 'Apply'
# A Windows Configuration screen will appear. Allow it to do its stuff (takes a few minutes), then restart your computer when prompted.
Does that resolve the issue for you?

With the new version of ITune, I do not know how to add a podcast to a playlist. The "add to playlist" which was easily found on older versions is not available. Your help will be appreciated.

I have difficulties with the new version of ITune, which I never experienced in the older versions.
1. I do not know how to transfer a new radio podcast to a playlist. The previous option "show in playlist" does not appear.
2. I do not know how to download an older podcast from the list of available ones offered for download. The latest one only is downloading, none other, not even the most recent but one.
Your help will be greatly appreciated in these difficulties.
I thank you in anticipation.
Curnonego

Continued at --> https://support.mozilla.com/en-US/questions/896391#answer-preview
Moderator: Please lock https://support.mozilla.com/en-US/questions/896385?s=&r=1&as=s

Closing the qty of PR which was already processed.

Similar Messages

Maybe you are looking for