Cloud document does not retain changes
Recently I have uploaded some documents to cloud documentand found that I have lost my changes like highlight text, I think it must be in sync with my local document.
How are you uploading the documents to Cloud? Can you please provide more details on your workflow, OS, Reader version etc?
Similar Messages
-
HOSTS file does not retain changes between boots
I make a number of changes to my HOSTS file for various reasons. Lately, though, I've noticed that attempts to alter the HOSTS file are reverted automatically for some reason.
I modify my HOSTS file by using the command at the terminal: sudo nano /private/etc/hosts
After editing the HOSTS file, I will save while exiting with control+X. At this point the changes are retained. Looking at /private/etc/hosts or /etc/hosts will show the changes I've made. Pining the domains I've modified will show the relevant changes.
Everything is working at this point.
However, at some point after a reboot, the HOSTS file will revert all of my changes without my asking. Looking at the HOSTS file will show it in the state it was before I made any changes at all, despite the file being modified and saved in the previous session.
Could anyone please advise as to how I can permenantly modify my HOSTS file? Again, I AM editing the file as root, and I AM saving the file. It works fine until reboot.
Thanks for any help.With Lions should be fine editing the standard /etc/hosts file
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
add here your IPv4 hosts list
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost -
Field VBUND does not allow changes to the document ?
If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico WangRico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well. -
IN FBCJ REVERSED DOCUMENT DOES NOT APPEAR
Dear Sir
We cancelled a document in fbcj. But cancelled document does not appear in fbcj. Although there is a red cross mark by the side of the document. Today's payment balance dose not change. In Corresponding Expense ledger the document is posted. Follow on document show that cash is reversed (exp ledger sing and cash ledger 200200 sign. but this document does not appear in fbcj.
Tried to revers the revers document but msg given " it is already reversed".
Please help to resolve this problem
With regards
NileshHi Nilesh,
Check mentioned note carefully ! It would rectify the balances of both companu code.
1309577 - FBCJ: Incorrect balance in cash journal - report RFCJ1
Read above note & run the program it would rectify the problem. If same balance mismatch error persist ,check mentioned notes
1727842 FBCJ: Continued problems with TCJ_BALANCE / balance
Regards
Mani Kumar -
Copy and Paste on Safari 5.0.2 does not retain formatting
Hi there.
I'm on Safari 5.0.2. and when I copy and paste something (in this case, on a message board--vBulletin, but it doesn't work on anything else) it does not retain the original formatting (for example--bold, italics, underline, etc.) If I copy something from Safari and paste it into another program, TextEdit for example, the formatting remains and works fine.
This is extremely annoying. Anyone have any ideas?
*If you're on Safari, try copying* and *pasting this sentence in a reply* --it will remove all the formatting for some reason. It will work in TextEdit, however. It's not just this message board software either...try it somewhere else too.
Message was edited by: FINALBOSSHi
copying formatted text & pasting in Safari does retain the formatting, so long as the place you're pasting it supports varying fonts/styles.
So copy/paste here, just shows as plain text.
c/p to blogger.com in the 'compose' tab - works fine
c/p to blogger in the 'html' tab - plain text
same with textedit: paste from safari to textedit +in a plain text document+ -you get plain text. -
Cloud documents will not open today?
Local Pages documents on my Mac will open as normal. Cloud documents will not open today. They worked yesterday.
Does anyone else have this problem? And did you find a solution?
Many thanks
IainOK, I'm replying to my own post.
I have two documents saved to the Cloud which will not open on my iMac. When I tried to duplicate one in the "open" window, Mac OS brought up a warning that the document was being modified. When I checked it on my iPad the document did not exist. So something went wrong during a sync at some point. On the iPad I could duplicate the document and now I can edit the duplicate on my iMac.
Summary: at the moment it looks like sync problems with specfic documents and not a general problem. -
I am using CS6 and when I go to save an image for Web the image does not retain its quality
I am using CS6 and when I go to save an image for Web the image does not retain its quality. The first week I did this it worked just fine and now the images save very pixely.
Here is a screenshot of my image on the artboard as I am editing it
Here is a screenshot of the image as I'm trying to save it for Web
As you can see, the image becomes pixely. I have tried to save it as every type of png and jpeg but nothing seems to work. I have no idea why it has started to do this. Please help!Change None to Art optimized then click apply(alteast in CS5 there was an apply, believe they removed that in CS6 as so many people missed that part).
-
I used pages to write my coursework, but when I saved it, pages crashed...
Now I tried to reopen the file. It shows "The document ___.pages can not be read - The Document Does Not Have A Valid Format".
I've looked through the forum to find any fix methond. I tried the "zip solution" -> changes the file entention as .zip file.
But the still can not solve my problem. it shows the zip file can not be open..
I put my files in the following link.
http://dl.dropbox.com/u/16476040/Marketing%20Coursework.pages
Please could anyone try to offer me assistance. bacause it is very urgent.
I will be very grateful if anyone can help me.Hi, Peter
I followed the instriction, and changed to root to locate /.DocumentRevisions-V100/
I can see several ______.pages file under the ./DocumentRevisions-V100/PerUID/
From the "Date Modified" attribute, I can find several __.Pages files that what I want.
But unfortunately, when I tried to open these version files, it still shows
The document can not be read. The Document does not have a valid format.... -
Home Page does not retain sign-on
I just recently updated to FF 7.0.1. Since then my Home Page (Google.com) does not retain my sign on even though I have checked the box to remember the sign on information on this computer. It always worked before the update and that is the only thing that was changed. Windows VISTA home premium sp2 operating system. HP Pavilion dv9843cl Notebook PC.
See:
* http://kb.mozillazine.org/Preferences_not_saved -
Iphone calendar does not retain entries after 2 months
iphione calendar does not retain entries after 2 months
OMG. I just did that sync thing and IT ALL CAME BACK!!!
I only hoped it would fix it for future. Wow- where WERE those entries that they could return? Is that the Cloud.
Thanks.
Low-tech elder -
Document does not want to open
Presentation does not want to open. "document does not open due to error"
What can I do?Deleted it, restarted it. tried it again. no change. repeated the whole cycle. no change. thinking about uninstalling and reinstalling, but that won't reallyk change the settings.
-
Billing document does not exist in VF22
Dear Experts,
We are working on Invoice list it gives output with LR00.
but we have created a new output type ZPGR and assigned in
SD>Billing>Billing document>Invoice List>Maintain Output for Invoice list
Prgram-RLB_INVOICE and smart form ZS_INVOICE_PACK_2_GRP
and VF21 i was able club billing documents. but in VF22 while issuing output it give error 'Billing document does not exist'
checked and found because VBTYP in VBRK for invoice list document(LR) it is 3. but RLB_INVOICE program checking values MNOPSU56.
any idea how to deal with, is there any other program instead of RLB_INVOICE to assign smart form
Please suggest
Regards
SivaHi Sunkesula,
below is the sample Z print program.
i copy some of the code from RLB_INVOICE and change the sapscript calling method to smartform calling method.
REPORT Z_TEST.
INCLUDE XXXX. "you may define any include you want
INCLUDE XXXX. ""you may define any include you want
* FORM ENTRY
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
* FORM PROCESSING *
FORM processing USING proc_screen
CHANGING cf_retcode.
DATA: lf_formname TYPE tdsfname,
lf_fm_name TYPE rs38l_fnam.
* SmartForm from customizing table TNAPR
lf_formname = tnapr-sform.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
* variant = ' '
* direct_call = ' '
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
* error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
ENDIF.
"call the fm of the smartform. You may pass in any data you would like to display here
CALL FUNCTION lf_fm_name
ENDFORM. " processing -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
User Profile Incremental Sync does not views changes in profiles.
User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Excise Invoice creation error -Billing document does not exists
Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
TruptiResolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.
Maybe you are looking for
-
I have a G drive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my iMAC or Mac air or LaCie drives. Help
-
Does partitioning new MacBook Pro to enable adobe suite cs2 make sense?
I am a casual user of Adobe suite Cs2 and it meets all my needs perfectly. I've invested so much time learning it that I am reluctant to switch to any other programs. However, my beautiful new Macbook Pro using Mavericks is incompatible with Cs2. Is
-
USB drives show up on list in System Profiler, but not on desktop
Hi, I have a 2.0 USB hub with 2 external USB drives attached, and sometimes they show up on the desktop, sometimes they don"t. When they don't, I can find them in the System Profiler under USB, and when I click refresh, they still show up in the list
-
[Solved] Date command not working, maxing out memory and cpu.
So I've encountered and incredibly strange problem. Today, I was working on a script for my bar panel. I was following z3bra's guide "Meeting at The Bar Really simple stuff, nothing harmful: #! /bin/sh # Fox - do whatever # Gathers various info to be
-
Hi there, I'm having some problems with this setup. My DVD player is set to RAW output. All cables are connected properly (checked, double checked) When playing most 5.1 content (Dolby Digital track from DVDs) surround works perfectly except for the